WIFI turns off after 30 minutes while streaming from the internet.

Unless my Touch (2G - 4.0) is plugged in, streaming of videos using Safari or NFB (National Film Board of Canada) will cease after exactly 30 minutes. The WIFI icon disappears. I have tried different routers, tons of setting changes, reset network connections on the Touch, etc. I KNOW that is not the problem. How do I keep the WIFI on so that streaming is not interrupted?
When using the NFB app, I can see that it is still downloading ahead (buffering) of what I am watching and that stops. Exiting app and going back in turns the WIFI back on but I have to watch from the beginning again - and then it stops after 30 minutes.
If the Touch is plugged in via USB, the WIFI icon remains on. I have currently set my mail to fetch every 15 minutes and so far that has kept it on but at some point it won't and I really don't want to fetch email on my Touch anyway.

I had the same problem when I upgraded.  In my case it definitely was the power supply.  In my effort to figure out the problem by swapping components in and out, the dieing power supply killed 2 P8P67 Pro and 2 2500k, and when I tested with the P67A-GD65, the power supply totally died, but the good thing is that the GD65 survived.  Swapped in a 430W to test and everything was perfect.  At full load with GTX260, it will draw less than 300W, so your power supply is fine to test.

Similar Messages

  • Yoga display turns off after 1 minute

    I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

    This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

  • TS3474 Why does my iPod Nano turn off after one minute of use?

    I just got a new 16 GB iPod Nano and it turns off after one minute of use.  Why does it do this?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • HT201343 can i turn off my imac monitor while airplay from it to my tv?

    can i turn off my imac monitor while airplay from it to my tv?

    You can just turn your brightness down to 0.  Only thing I have figured out so far.

  • HT4864 how do I turn off auto reply "I'm away from the office........."

    How do I turn off Auto reply "I'm away from the office..................         '

    Go to the mail page at http://icloud.com , click the cogwheel icon at top right, choose 'Preferences' and uncheck 'Forwarding'.

  • While using the airport express can I listen to music streaming from the Internet?

    While using the airport express can I listen to music streaming from the Internet?

    The music must be in your iTunes library.
    Or, you can try to add a special application like Airfoil that may allow you to stream any audio signal on your computer to the AirPort Express. It might work.
    http://www.rogueamoeba.com/airfoil/

  • Does Premier Elements allow me to record video streaming from the internet?

    Does Premier Elements allow me to record video streaming from the internet?  If so which version and how?

    kc42k
    Although Premiere Elements is not going to record streaming video from the Internet but there are other programs that can, you should consider the terms of service for the web site that is the source for the streaming video.
    Online, there are very comprehensive articles on numerous programs that will do the recording.
    But, even those articles point out that many of the Internet web sites that you target for their videos have terms of service that would legally prohibit the recording of streaming video from the named web sites, one example, YouTube, if no download button and depending on the terms of service.
    Please consider. Any questions about the above, I can point you to the appropriate documentation on the matter.
    Thank you.
    ATR

  • G5 Turns off after 10 minutes

    My iMAC G5 just turns off after about 10 minutes. I had trouble with the power supply a few years ago and I replaced it and everything was great. Now it just turns off after about 10 minutes and I am wondering if the power supply is acting up again. Do these things have a problem like this? It was easy to replace, so I can just do that again if that will fix the problem. But I don't want to just start changing out parts and still have the problem. Is the power supply a problem with this model?

    More info on the iMAC. The processor is 1.8 GHz PowerPC G5 the memory is 1 GB DDR SDRAM running Mac OS X Version 10.5.3. Buss speed 600 MHz, Number of CPUs 1. I just took it apart and cleaned the dust out to see if that will help. We will see.

  • Why does my Sony Sound bar CT60BT turn off after 15 minutes?

    I turn the volume down during the evening and when I do, it automatically turns off after about 15 minutes.  Is there a way to change the settings so that it doesnt go into standby mode?

    Hi mdalton1284,
    Your Sound Bar has an Auto Standby Function.
    It will enter standby mode automatically when you do not operate the Sound Bar for about 15 minutes and the Sound Bar is not receiving an input signal but the sound bar is receiving signal from your PS4 going to the TV via HDMI connection.
    You may try resetting the Sound Bar.
    Follow the steps below.
    Use buttons on the remote control for the operation.
    Press BASS +, VOL - , and TREBLE + in that order within 3 seconds.
    Let us know if you're getting the same result after resetting the device.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • Wifi turns off after screen lock  macbook mid 2010, mountain lion

    I want my wifi to be turned on permanently, when macbook is on.
    However, when I lock screen or it is locked after period of inactivity, wifi turns off.
    Are  there any settings, any config files, any system tools which could be used to tell my MB 2010 not to turn my wifi off.

    I think I may have found a solution. I feel like a fool for not thinking of it earlier.
    System Preferences > Energy Saver > Power Adapter > Computer Sleep > Never
    This worked overnight, even with the screen locked.
    Obviously, you could do the same for the Battery version of the panel.
    Hope this helps.

  • WiFi turns off after an inconistant amount of time until restart.

    On my MacBook Pro. My wifi turns off at certain times. So to battle it when I feel its about to go I'll turn airport off and on again. I don't get it. It really happened after installing 10.5.7. Although I remember once long before that the airport turned off and went back after restart. Could have been with 10.5.3. I ran Apple Hardware test (not the through one just the normal one) and it said that my hardware was fine? Is everyone experiencing this on All 4,1 MacBook Pro 17" Models?

    Here is something but I am not sure whether it is the right thing.
    Jul 25 20:01:14 Jan-Kouts-MacBook-Pro kernel[0]: AirPort_Brcm43xx: Ethernet address 00:25:00:47:15:60
    Jul 25 20:01:14 Jan-Kouts-MacBook-Pro kernel[0]: AirPort: Link Down on en1
    Jul 25 20:01:16 Jan-Kouts-MacBook-Pro kernel[0]: AirPort: Link Up on en1
    Jul 25 20:01:39 Jan-Kouts-MacBook-Pro com.apple.launchd[81] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
    Jul 25 20:01:40 Jan-Kouts-MacBook-Pro airportd[22]: Error: processsccallback() interfaces: 2\n<CFArray 0x10d370 [0xa03551a0]>{type = mutable-small, count = 2, values = (\n 0 : <CFString 0x101d80 [0xa03551a0]>{contents = "en1"}\n 1 : <CFString 0x102260 [0xa03551a0]>{contents = "en1"}\n)}
    Jul 25 20:45:32 e178111037 kernel[0]: AirPort: No beacon for too long time
    Jul 25 20:45:32 e178111037 kernel[0]: AirPort: Link Down on en1
    Jul 25 20:51:02 Jan-Kouts-MacBook-Pro kernel[0]: AirPort: Link Up on en1

  • WIFI turns off after wake

    Ever since I upgraded to Yosemite in my iMac my WIFI turns off each time it wakes from sleep (it doesn't happen on my MBPro).  I have tried every solution I could find and nothing seems to work (new user, safe boot, turning off AWDL, removing plist files, etc.).  Here is the system log from last time WIFI turned off:
    1/31/15 2:00:40.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    1/31/15 2:00:40.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    1/31/15 2:00:40.215 PM airportd[33]: _handleLinkEvent: Got an error trying to query WiFi for power. Resetting state variables.
    1/31/15 2:00:40.221 PM sharingd[257]: 14:00:40.220 : Discoverable mode changed to Off
    1/31/15 2:00:40.221 PM sharingd[257]: 14:00:40.220 : BTLE scanning stopped
    1/31/15 2:00:40.222 PM sharingd[257]: 14:00:40.221 : SDStatusMonitor::kStatusWirelessPowerChanged
    1/31/15 2:00:40.401 PM UserEventAgent[19]: Captive: CNPluginHandler en1: Inactive
    1/31/15 2:00:40.402 PM discoveryd[55]: Basic Bonjour stop listening on en1
    1/31/15 2:00:40.403 PM configd[29]: network changed: v4(en0:192.168.1.3, en1-:192.168.1.18) DNS* Proxy SMB
    1/31/15 2:00:40.413 PM networkd[168]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
    1/31/15 2:00:40.519 PM com.apple.xpc.launchd[1]: (com.asb.toggleairport) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    If somebody sees something that can explain why this is happening please let me know.  It's driving me crazy!!
    Thanks.

    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wi-Fi Problems in OS X Yosemite (3)
    Wireless Diagnostics
    Also try turning off Bluetooth.
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)

  • My nano starts playing a selection then turns off after one minute

    My nano starts playing a selection then turns off after one minute

    Problem solved for now.  Cleanded the jack port with a q-tip and pushed the cable in harder.  Seems to be working.  Thanks to all others who posted these past suggestions.

  • Satellite P850 display turns off after only minute or two of inactivity

    Hi,
    I have my Display settings set to turn off display after 1 hour when on power and 10 minutes when on battery.
    I have a screen saver set up to go on after 10 minutes.
    However, my display often (but not always) turns itself off after only a minute or two of inactivity.
    Can anyone explain this weird behavior?
    It starts up immediately I move the mouse but I just don't like things happening that I haven't scheduled.
    Thanks.
    Hoges

    Hi
    Could it be possible that you changed the settings in the power profile which is not in use?
    I mean in case another application like ECO Utility would control the display brightness, the changes in Windows power plant would be useless.
    Toshiba ECO Utility for example contains some settings like dim display after
    I think you should check this utility

  • Computer turns off after 20 minutes when using battery

    I only have 8 months with my computer and when I use it on battery life it turns off without warning after 20 minutes and the indicator showed that it could continue running for 2 more hours.

    Reset the PMU (power management unit) and Re-calibrate the Battery

Maybe you are looking for

  • My Firefox windows keep jumping from one to another

    When I open a new Firefox window, after some time if I have another firefox window (not tab) open, for some reason my computer will jump from one I am currently using to the inactive one, although it still shows it as being inactive unless you click

  • [SOLVED] Ardour - could not reconnect to audio/MIDI engine

    I have a problem with Ardour: when I am tryng to create a session it is telling me that it "could not reconnect to audio/MIDI engine. I don't really know where to go from here.. Can anyone please help me with this? Let me know if there is any informa

  • Contact problem while creating account Web UI

    Hi everyone, I have a problem when I want to create a new account, starting from the detail view of an existing account. When I press the new button, the contact, marketing attributes and relationship are copied from the existing account. Those field

  • HELP: I created mailbox (duplicate), then deleted original & lost emails

    Late tonight I decided to change a mailbox name to all caps. I did it incorrectly selecting 'New Mailbox' and used a duplicate name. Afterwards I saw the original mailbox still existed (it appeared gray colored) and looked to contain identitcal subfo

  • PanelTabbedPane with multiple row tabs

    Hi all, Can we have multiple rows for tabs with panelTabbedPane Something like, Tab1 tab2 tab3 tab4 tab5 tab6 tab7 Thanks.