Wifi unable to connect after putting in password

Will log onto open wifi networks  just not a locked one

Hello tomof1998
There are a few things to try for troubleshooting your issue and they are detailed in the article below.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Similar Messages

  • Iphone 5 finds wifi network but cant connect after putting in password

    hi, i have tried all day to get my iphone to connect to my wifi by resetting network settings, entering wifi password again and turning off router etc. after typing in password the wifi tab in settings says that i am connected to this wifi but in the tab at the top of my phone where it says your network/service carrier and battery percentage, the 3 bars that tell how strong my connection is does not appear at all

    Hello tomof1998
    There are a few things to try for troubleshooting your issue and they are detailed in the article below.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • TS1398 Iphone 4s wont connect to my wifi 'unable to connect' HELP i enter password correctly

    Iphone 4s wont connect to my internet when i try to connect i enter password in and it comes up with 'unable to connect' ive tryed reseting router, reseting network settings on iphone. HELP!

    The fastest way to deal with your iPhone saying "unable to connect to network" is knowing the name of you network (SSID) and password. Go to settings>network>other and put in the name and password.

  • IPhone USB/BT/Wifi Unable to Connect after iTunes 10.7 Update

    If anyone can help, it would be greatly appreciated!
    Background: 
    I received and installed the iTunes 10.7 (21) last night.  This morning, my MBP would not connect to my I phone via Wifi/USB/BT. I did some digging and apparently this is an issue with this iTunes update.  I have subsequently removed iT 10.7 and reinstalled iT 10.6.3 and successfully retrieved the archive library.  That all seems to be working well. 
    By way of trouble shooting the iPhone 4, I've been able to establish link to the Wifi and USB with my work Windows laptop, and wifi with my iPad 3 MacBook, so I'm reasonably certain that it is working correctly.
    Hardware:
    MacBook Pro:13/i5; OS 10.6.8 with all updates.
    iPhone 4: iOS 5.1.1
    I really don't want to update OS/iOS at this time for a number of reasons... like I really use the maps and would like to wait until that issue is fixed for iOS6.
    So, what have I missed?  What tweak did the 10.7 update do that I can undo?
    I'm sickeningly dependent upon my iPhone/hotspot and this is most distressing!
    Anyone know how to correct this?
    Best regards,
    John

    A bit more...
    iPhone4 connects with the cable, I can sync, update, etc... just no wifi/BT/USB data...

  • WIFI unable to connect even if i input correct password

    I have just bought a Ipad and the WIFI unable to connect even if i input correct password, can someone share some light on the same.

    Hi,
    Troubleshooting help at this link for Wi Fi
    http://www.apple.com/support/ipad/wifi/
    Carolyn  

  • After iOS 8 update doesn't sign in my FaceTime and email account keeps saying incorrect password even after putting right password I tried reset option already still says the same incorrect Please Help

    After iOS 8 update doesn't sign in my FaceTime and icloud email account keeps saying incorrect password even after putting right password
    I have already tried reset option already still says the same incorrect Please Help

    Hi Go to settings Email Accounts Delete Email Account then Re add acount back again If you have more than one Email Account do this with each one. Cheers Brian

  • On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone

    On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone.

        Hi JoeC695,
    That's not good! We want your software to work properly. Have you tried uninstalling the Verizon Software Utility from your MAC? Do you receive a specific error message?
    Thanks,
    PamelaF_VZW
    Tweet us vzwsupport

  • How do you unlock ipod after putting in password to many times?

    how do you unlock ipod after putting in password to many times

    Follow the steps in this link that best apply to your situation:
    iOS: Device Disabled
    Cheers,
    GB

  • Cannot do updates keeps asking for Apple ID after putting your password in it keeps telling you your Apple ID is incorrect even after reset new password.

    Cannot do updates keeps asking for Apple ID after putting your password in it keeps telling you your Apple ID is incorrect even after reset new password.

    Did you go to Settings>iTunes and App Store and sign out and then sign in with the new password?

  • Wifi no longer connecting after startup

    wifi no longer connecting after startup... so I have to connect manually... started after 10.7.3
    any ideas

    Which computer are you experiencing this on?
    There are several threads dealing with (mostly) iMacs + bluetooth keyboards/mice and issues with WiFi no longer automatically connecting. There seems to be some issue that 10.7.3 introduces with these series of macs.
    No Apple provided solutions yet, but several workarounds: 1) attach a network cable direclty from modem/router to mac; 2) use the power button instead of mouse/keyboard to wake up mouse; 3) use USB keyboard/mouse (not personally confirmed); use airport extreme/express as a bridge.
    Right now it's a waiting game until Apple provides another update. I do recommend going to Apple feeback: (http://www.apple.com/feedback/) and at least voicing your opinion. Calling AppleSupport will do the same, but they'll make you go through the same (likely useless) steps everyone else has done.
    Good luck!

  • How do I connect my i phone 5s to my home wifi? keeps saying unable to connect after I put in the password

    how do I connect my i phone 5s to my home wifi? keeps saying unable to connect

    Is anyone else able to use the internet around you, say a computer or another device? If they are unable it might be your modem. You can always try to reset your modem. Simply unplug it and plug it back in,

  • Hi I am having trouble with wifi my OSX version is 10.8.4 and I can't connect iv put the password in and it' keeps coming up with a exclamation mark in wifi symbol I can't get my computer to delete the network or forget it??

    Hi I have a mac book pro OSX 10.8.4 iv connected to a wifi point where I am staying and iv selected network and put in password and over the wifi symbol a exclamation mark appears the wifi works perfectly on my iPhone but won't with my MacBook iv turned it off and on iv tried to forget/delete the network but it won't let me? Is there anything I can do I really need it cause I'm travelling and need to book things. Thanks

    Information.
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • Wifi "unable to connect" for the past month

    I have not been able to connect to my home wifi for the past month. It keeps popping up saying that it is unable to connect. sometimes it will work, but only for 2 minutes tops. My roommate uses the same internet connection and she said that she has not had a problem with it. I have tried rebooting it, turning it on airplane mode then resetting network settings and rebooting it, forgetting the network, and even resetting my entire phone. nothing will work. but my phone connects to the wifi at work and works perfectly fine. SOMEONE PLEASE HELP

    The router in 99.99% of the time may be fine and see and connect to the devices it detects. However after certain updates to phones it has been said that the phone will not connect to the router.
    There was a list of known routers on this forum that just did not work. The so!ution was to either reset the broadband modem, wireless router and turn off the phone.
    Then if it connects your problem is solved. If it doesn't your next step is to see if there are firmware updates for the modem and the router. (Mainly routers) if it still does not connect a new router not on the non working list should be purchased. Yes its another expense but if you want the device to connect that is your option.
    Another trick you can use is to change the security from WEP to WPA, PSK or WPA 2 and change the password to the router.
    Some people stated a password of at least 9 figures / digits worked great.
    If you placed the phone on its own IP address that also has been known to work.
    However its best to talk to tech support at the router maker to assist.
    Good Luck

  • Wifi doens't connect after upgrade to 10.7.5

    I upgraded my imac to 10.7.5, and some how my wifi did not connect to the internet from yesterday. I tried network diagnostics for couple times, and there is one time the internet was on when the small window popup with the msn "some thing abt the network is ok" and then it disconnect again after a few sec. i tried to diagnos again but it still doesnt work. Then i reseted the router, and nothing changed.  Is there anyone can help me out.

    Please take each of the following steps until the problem is resolved. With a desktop Mac, you may need to use a USB keyboard or mouse. You should always have one of each available as a spare.
    Step 1
    Follow the instructions on the applicable pages linked below:
    How to set up your Apple Wireless Keyboard
    How to set up your Apple Wireless Mouse or Magic Trackpad
    Step 2
    Reset the System Management Controller.
    Step 3
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/com.apple.Bluetooth.plist
    Right-click or control-click the line and select 
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Windows 7 Wifi Unable to Connect (one device)

    I have 4 devices (asus laptop - personal, dell laptop - work, android phone - personal, windows 8 phone - work) that all used to connect to wifi networks without an issue. Both laptops run windows 7. I'm now in temporary housing for a few months with its
    own wifi setup. I do not have control of this router. Everything but the dell laptop was able to connect to this network. However, the dell will give me the generic "unable to connect error" when I try to connect and obviously the troubleshooter
    doesn't provide any more information than that. Also, my ethernet cables are packed away in storage and I really don't want to buy another one for this temporary period. I've seen a lot of similar issues posted, but none of the solutions posed have worked
    for my situation yet.
    So the dell has NEVER been able to connect at this location - this is not an issue where it gets booted off the network/has poor connectivity.
    I've tried the following which did not work:
    1) Manually entering IPv4/Gateway/DNS etc.
    2) Sharing the network (protected and unprotected) from my personal laptop
    3) Standard restarts, disconnect/reconnects, etc. for all devices and the router
    4) Entering all the encryption types (even though I know it is WPA2-Personal, AES)
    5) Yes, wifi is enabled on that computer
    6) Given that this is a work device, I cannot easily uninstall/reinstall drivers due to security blahblahblah
    I would appreciate any advice with this situation.
    Thanks!

    Hi,
    First, please check the following event log log before you try any suggestions.
    Microsoft-Windows-WLAN-AutoConfig
    It’s under applications and services log.
    Based on the current situation, you may perform the following suggestions to check the issue:
    1. Update the router firmware and reset the router.
    The default settings of Windows 7 should work normally with the wireless router.
    2. Set up a new network with WPA2 Encryption.
    3. Verify with the WLAN service is started  and set to automatic, if the WLAN service is stopped, I would suggest you to start the service and put it to automatic.
    4. Follow the steps to start the WLAN service and disable the IP Helper service. (Click on Start, type in services.msc. Select WLAN Autoconfig from the list, Right click properties)
    5. Connect to another wireless router for a test.
    In addition, Please Use Network troubleshooter event logs to solve network problems
    http://windows.microsoft.com/en-us/windows7/use-network-troubleshooter-event-logs-to-solve-network-problems
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

Maybe you are looking for

  • User of Checkbox/ Radio Selections.doc

    User of Checkbox/ Radio Selections.doc Thank you, this is very informative and helpful. In the doc you mentioned about a cfm file, however I was not able to see the file. Will you be able to explain a bit about it?

  • Database link with the alias and full description in the connect string

    Hi, i have created database link with alias in tnsentry and full description and suppose i have removed the tnsnames.ora file what will be the impact on the database link that is whether database link will work or not i am sure db link created with a

  • How can I share a group from my contacts

    I have names in a group in my address book.  I'd like to share the data as one list.  Please recommend how to do that.  thanks

  • Is there a way where we can set the headers from custom plugin

    Using OAM 11.1.1.5 and webgate 11g. I am trying to custom cookie using a authentication plugin. So I created a custom authentication module with three steps. First identification then authentication both using Oracle's out of box plugins. Have set th

  • [svn:fx-trunk] 8605: Transform bug fixes

    Revision: 8605 Author:   [email protected] Date:     2009-07-15 15:30:29 -0700 (Wed, 15 Jul 2009) Log Message: Transform bug fixes http://bugs.adobe.com/jira/browse/SDK-22046 - Can't set matrix3D property on Transform Player declares matrix3D setter w