WIFI unable to connect even if i input correct password

I have just bought a Ipad and the WIFI unable to connect even if i input correct password, can someone share some light on the same.

Hi,
Troubleshooting help at this link for Wi Fi
http://www.apple.com/support/ipad/wifi/
Carolyn

Similar Messages

TS1398 On holiday in Spain, my phone wont connect to wi-fi at my friends apartement but connects to some wi-fi locations in the city. The rest it tells me that "Unable to connect" even though i know the password is correct and my ipad connects.

On holiday in Spain, my phone wont connect to wi-fi at my friends apartment but connects to some wi-fi locations in the city. The rest tells me that " Unable to join the network" even though i know the password is correct and my ipad is connected.
I have tried resetting network connections and switching on/off wi-fi, and also reset using home and top button, still nothing.

Try going to the Wifi settings and clicking the little arrow next to your network, and click "forget this network" then try re-connecting. If that doesn't work, try going to settings-general-reset and clicking reset network settings. Also, make sure you have your network password correct if there is one.

After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Unable to connect to the MKS: Login (username / password) incorrect

Hello everyone, my first post.
Several months I've been trying to solve a problem with VMWare Server Remote Console 2.0
When I try to open the remote console of any machine I have I get the following error:
Unable to connect to the MKS: Login (username / password) incorrect
Not to do and not understand why. If anyone can help I would appreciate that.
Thank you all.

There's a quick fix here.
Just a guess, but I think it has something to do with computers not being on a domain. I'm logged into my local Windows 7 system using the same username/password as my domain user, and I connect to network resources using that. To spite the fact that my computer is not on the doman, I can see in the VMWare status window that it's using DOMAIN\user instead of just the user to start the VM. Perhaps when the VMWare services auto-start the domain hasn't been authenticated to yet, hence the account is not valid.
Original text from that site:
Today I stumbled upon an issue in VMWare Server 2.0 problem today on a client’s server. I could log into the web administration console of VMWare Server, and I could manage the VMs from there without a problem.
The issue came when I tried to open the console window on one of the VMs from within the VMWare admin console. The Console window opened, but after a few moments I saw: “Unable to connect to the MKS: Login (username/password) incorrect”
I tried creating a desktop shortcut for the VM (from the VM’s summary pane), but still ran into the same problem.
Shortly after unsuccessfully googling the error, I discovered the solution myself. I simply restarted the following Services:
– VMWare Authorization Service
– VMWare Server Web Access
(In the process it restarts another one or two services, but does not interrupt any active VMs).
After the service restart, the VM console windows opened without any problems.

Ipod 4 got locked after several wrong password now even i enter the correct password it is still unlocked...jus my ipod speaks wenever i press a button like i press time it says it..wen i press unlock keys it jus say it

my ipod 4 got locked after several wrong password attempts by my lil daughter and now even i enter the correct password it is still unlocked...jus my ipod speaks wenever i press a button like i press time it says it..wen i press unlock keys like 1, 2,3 it jus says it like "1, 2, 3 ....." or i press battery it says "battery"
but it am unable to unlock though i enter the unlock keys ....please

no boss...its still the same... after clicking home thrice...it appears accessibility option but wen i jus click on any of it like "turn voiceover off" or turn zoom on" it just keep on repeating it...it jus says it like that...!!
dont know wot happened...!!! ipod is just speaking whatever u press..it just says any button u press...
n lockedd........!!!
please help thanks

Wifi unable to connect and incorrect password problem/issues

since i updated to iOS5.1 i started having a problem with our wifi connection. it is locked but even though i enter the correct password my itouch is promting that i have punched in an icorrect password itried using a different iDevice and punched in the same password it's all good, they can connect in our wifi and most of the time i receive an error "unable to join the network" if im trying to connect to an open network. what seems to be the problem? can somebody help me with this one?

- Reset the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

Windows 7 Wifi Unable to Connect (one device)

I have 4 devices (asus laptop - personal, dell laptop - work, android phone - personal, windows 8 phone - work) that all used to connect to wifi networks without an issue. Both laptops run windows 7. I'm now in temporary housing for a few months with its
own wifi setup. I do not have control of this router. Everything but the dell laptop was able to connect to this network. However, the dell will give me the generic "unable to connect error" when I try to connect and obviously the troubleshooter
doesn't provide any more information than that. Also, my ethernet cables are packed away in storage and I really don't want to buy another one for this temporary period. I've seen a lot of similar issues posted, but none of the solutions posed have worked
for my situation yet.
So the dell has NEVER been able to connect at this location - this is not an issue where it gets booted off the network/has poor connectivity.
I've tried the following which did not work:
1) Manually entering IPv4/Gateway/DNS etc.
2) Sharing the network (protected and unprotected) from my personal laptop
3) Standard restarts, disconnect/reconnects, etc. for all devices and the router
4) Entering all the encryption types (even though I know it is WPA2-Personal, AES)
5) Yes, wifi is enabled on that computer
6) Given that this is a work device, I cannot easily uninstall/reinstall drivers due to security blahblahblah
I would appreciate any advice with this situation.
Thanks!

Hi,
First, please check the following event log log before you try any suggestions.
Microsoft-Windows-WLAN-AutoConfig
It’s under applications and services log.
Based on the current situation, you may perform the following suggestions to check the issue:
1. Update the router firmware and reset the router.
The default settings of Windows 7 should work normally with the wireless router.
2. Set up a new network with WPA2 Encryption.
3. Verify with the WLAN service is started and set to automatic, if the WLAN service is stopped, I would suggest you to start the service and put it to automatic.
4. Follow the steps to start the WLAN service and disable the IP Helper service. (Click on Start, type in services.msc. Select WLAN Autoconfig from the list, Right click properties)
5. Connect to another wireless router for a test.
In addition, Please Use Network troubleshooter event logs to solve network problems
http://windows.microsoft.com/en-us/windows7/use-network-troubleshooter-event-logs-to-solve-network-problems
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Ipod Touch 3G, Although connected to wifi, unable to connect to internet

Basically the problem is that my Ipod Touch 3G is unable to connect to the internet, even though I am connected to the Wifi network. Are there any suggestions? I have read through the Apple Troubleshooting (tried resetting, setting static IP, etc.)
Thanks

I'm having the exact same problem with my 3GS running iOS4, however my iPd Touch can connect to the internet fine. I can connect to the wi-fi, but connecting to webpages and browsing or checking hotmail etc, no such luck. I have also setup a static ip address and also authourised the MAC address of the device on the BTHomeHub router.

IPad mini doesn't detect wifi/unable to connect

Hello,
I've had my iPad mini since March 2014. It's been working perfectly until last Friday, when it suddenly stopped connecting to my home wifi network. Upon closer inspection, I found that the iPad doesn't even detect the home network anymore. I tried all the solutions listed on here: resetting network settings, rebooting, resetting all settings - except a total restore.
At times it started detecting the network but then when I try to connect it says "unable to connect". I tried making a hotspot out of my iPhone 3G and connecting to it with my iPad - also the same thing, unable to connect. I couldn't try any other networks yet.
What should I do next? Could this be a hardware issue? PS: I've never dropped or damaged the iPad in any way, and it was just lying on the day when wifi stopped working.
Thank you.

Hello karinakremlin,
Thank you for using Apple Support Communities.
You can use this article to troubleshoot your Wi-Fi connection issues. You have said you have tried many of these steps already, but I would recommend following this article in case there is something you missed.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Regards,
Jeff D.

Ipad not connecting to wifi, "unable to connect"

So i have done everything from turning off and on, network reset, and reseting the entire ipad to factory settings. Nothing has helped. The wierd thing is once I got a airport express, my ipad would only connect to that and nothing else. Or it connects in the apple store or at my school where this is a big network. My wifi recognizes other networks but won't connect to them. This is extremely frustrating because when I want to connect at friends places it doesn't connect, it immediately says "unable to connect", we tried reseting the router, we even tried playing with the frequencies on the router, I've also tried at other places and its the same problem. I've never had a problem with apple products until now. Someone please help me because I don't what else to do. By the way this is a Ipad 3 and I have the latest software update as well.

I have the same issues!! Please apple get this fix soon! It's starting to get really frustrating

WiFi - unable to connect to home network

I had a problem syncing and iTunes not recognizing my iPod touch, (and my new iPad). Did a restore on the iPod Touch and that solved the syncing problem, now I cannot connect to the WiFi in my home, (cannot connect with my new iPad either). I have a Linksys Wireless-N Broadband Router Model WRT160N. I am dying to connect the new iPad and get it up and running, etc. Can anyone help me solve the "Unable to connect to (my home network's name)".

Use G band, not N. I encountered a lot of problems with my new router on wireless N. Here is a reply I wrote for the other posts about iPad connectivity problems:
I have the base iPad 16gb Wi-Fi model and it was connecting to wifi fine. A few days ago I had to get a new modem/router. I bought a netgear dual band model (G and N) and used wireless "N" on my my two MacBooks and my iPad.
Two days ago I started getting the "Safari could not open the page because the server stopped responding." error on the iPad along with the schizophrenic signal strength bars going from three, to one, to two, to disappearing totally, to whatever, and Safari not opening pages and sometimes crashing, and when it would connect running slower than molasses.
My laptops worked fine, seeing both G and N and working equally well regardless of which I chose.
I did all the jumping thru hoops I have read on this and various forums and that Apple suggested back in April with naming each band on the router differently but with same security settings, renewing lease on Safari, reseting iPad, resetting network settings, turning auto connect off, etc., etc., etc, none of it worked.
So I started to wonder . . . does the iPad even work with "N" . . . the Apple site says "yes", but I wondered . . . what happens if I have the iPad ignore "N" and connect only with "G".
Guess what . . . that fixed the problem.
I went into Settings > WiFi > and told it to "Forget this Network" for the "N" band and then selected the "G" band.
Problems gone.
If you're experiencing the connection problems I'd bet dollars to doughnuts you're trying to use wireless "N". Have it ignore that band and use "G".

Wifi "unable to connect" for the past month

I have not been able to connect to my home wifi for the past month. It keeps popping up saying that it is unable to connect. sometimes it will work, but only for 2 minutes tops. My roommate uses the same internet connection and she said that she has not had a problem with it. I have tried rebooting it, turning it on airplane mode then resetting network settings and rebooting it, forgetting the network, and even resetting my entire phone. nothing will work. but my phone connects to the wifi at work and works perfectly fine. SOMEONE PLEASE HELP

The router in 99.99% of the time may be fine and see and connect to the devices it detects. However after certain updates to phones it has been said that the phone will not connect to the router.
There was a list of known routers on this forum that just did not work. The so!ution was to either reset the broadband modem, wireless router and turn off the phone.
Then if it connects your problem is solved. If it doesn't your next step is to see if there are firmware updates for the modem and the router. (Mainly routers) if it still does not connect a new router not on the non working list should be purchased. Yes its another expense but if you want the device to connect that is your option.
Another trick you can use is to change the security from WEP to WPA, PSK or WPA 2 and change the password to the router.
Some people stated a password of at least 9 figures / digits worked great.
If you placed the phone on its own IP address that also has been known to work.
However its best to talk to tech support at the router maker to assist.
Good Luck

How do I connect my i phone 5s to my home wifi? keeps saying unable to connect after I put in the password

how do I connect my i phone 5s to my home wifi? keeps saying unable to connect

Is anyone else able to use the internet around you, say a computer or another device? If they are unable it might be your modem. You can always try to reset your modem. Simply unplug it and plug it back in,

BB Curve 8520 Wifi Unable to connect

I already set up my wifi network yesterday and i was able to browse but it stopped working just this morning. It prompted that the available wifi network is available but each time I am attempting to connect it says: Unable to connect. Reason Failure to connect to the network. Please help!:

Hello shamae_96,
The following article may help regarding the "Unable to connect" error message you are receiving when attempting to connect to your Wi-Fi network:
Unable to connect to a Wi-Fi network - http://www.blackberry.com/btsc/KB14477
We hope this helps.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Wifi "unable to connect", but only sometimes

ok so since i have had my iphone replaced (3g with 3.0), my wifi will connect randomly at home, and when it disconnects, (like putting it into sleep mode), i will go to wifi settings and try to connect to my home connection, but am only given the message "unable to connect to linksys". this is very odd because my iphone will connect by itself to my wifi connection without problems, only, i have no idea when this will happen. it randomly connects to wifi by itself.

Yes, this is widely reported 'feature' of 3.0. There are many current threads that may or may not help you (probably not.) Hopefully spotty WiFi will be fixed in the next firmware version.
John F

WIFI unable to connect even if i input correct password

Similar Messages

Maybe you are looking for