Wifi unable to connect to network on IOS 7.1

I m using iphone 5s and recently updated my ios to 7.1. My wifi at office which i was able to connect to earlier is not able to connect now after the update.On the other hand, it works well with my wifi at home and anyother place. I am facing this problem only with the guest wifi account in my office. I have tried all the trouble shooting steps given in the discussions for wifi connectivity issues.
Please help me because this is having a major impact on my data plan as i am not able to connect with wifi. Any help right away is much appreciated.
Thanks

You may have to consult with your network administrator or other IT personnel on this issue.

Similar Messages

  • I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

    I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

    What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
    A1409 Gen 4.. The new AC is A1470
    How is it setup?
    I need the whole network setup. what modem/router, how is the TC connected etc??
    I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in.

  • Unable to connect to network ios 7

    Tried Reset Network Settings with airpalne mode on and with it off. Reset router. Updated router to latest firmware. Still unable to connect to network.

    Hi there casefromab,
    it sounds like you have already tried a few things, but you may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W. 

  • Unable to Connect to Network error with right code

    My Ipod Touch 4G just started having a problem a few days ago i left my house and reset my network settings because i wanted to see something not thinkign about when i got home and now any time i try to connect to it i ge the unable to connect to network error. My friends and family are all using there ipods on our network and they still work and ive tried everything ive updated reset network setting restored the ipod any suggestions on how to fix this?

    - Did you power off and then back on the router?
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

    I am having a major problem connecting to FaceTime today.  Message reads "unable to connect, check network connections".  I am online, mail works, ex
    Tc.  This was not a a problem two days ago.  Any suggestions?

    Could be that the servers are overloaded today.

  • Imac FaceTime unable to connect to network (safari connected and loading pages).

    I have a brand new Imac, I have never been able to get facetime to work. It keeps getting hung up on the log in page, and eventually gives me an error message of unable to connect to network. Safari and other web based programs are working perfectly. 
    Any Ideas?

    How can I get my Mac to join an open 3Com wireless
    network? The network is recognised but Mac is unable
    to connect...
    The 3Com wireless router is connected to a broadband
    router through a PC running XP.
    Do you have two routers? That may be your issue. You should only be using one router, or configure one of the routers and turn of DHCP.

  • TS1398 Iphone 4s wont connect to my wifi 'unable to connect' HELP i enter password correctly

    Iphone 4s wont connect to my internet when i try to connect i enter password in and it comes up with 'unable to connect' ive tryed reseting router, reseting network settings on iphone. HELP!

    The fastest way to deal with your iPhone saying "unable to connect to network" is knowing the name of you network (SSID) and password. Go to settings>network>other and put in the name and password.

  • WIFI unable to connect even if i input correct password

    I have just bought a Ipad and the WIFI unable to connect even if i input correct password, can someone share some light on the same.

    Hi,
    Troubleshooting help at this link for Wi Fi
    http://www.apple.com/support/ipad/wifi/
    Carolyn  

  • Ipod "unable to connect to network"

    i have an ipod4, and i'm only unable to connect to my home router, my friend's ipod connects to it fine, but mine is having problems, i have reset network settings, turned off sercuity on router and was still unable to connect, i have gone into router and opened mac address too but still wont let me connect, any suggestions

    I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.

  • NOKIA N8 - Unable to connect - WLAN Network not fo...

    also for NOKIA N8 THE SAME PROBLEM: Unable to connect - WLAN Network not found;I see my network in the wlan list (Tthe state is "knowed") but when i try to connect to it,i read: Unable to connect-wlan network not found;i tryed with: mac filter on/off,dhcp on/of,wep protection on/off,firewall router on/off,power saving in the phone on/off, but the problem is the same ever!..Niklas Savander,..where you are?..nokia is back?..but with the same problems!

    Well, I seem to have issues with WLAN as well.
    When I am approx. 10metres away from my Router, the N8 doesn't connect. However, I can connect to WLAN using my Nokia N900, Nokia E52 and my Netbook (Asus EEE1005HA). This is a N-router with standard settings. I have tried changing, the channels etc. but it doesn't resolve the problem.
    So is this a problem with the Nokia N8? I mean, all my other wireless devices work fine. I even tried changing the Wireless Interface type from N/B/G, to B/G but as I said before, the problem is still there.
    Hopefully this problem can be sorted with a software update, that is if the N8 finds it difficult to connect to Wireless Internet.
    P.S.: Tthere is another thread reporting similar problems. Here is the link.

  • My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?

    My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?

    AmishCake wrote:
    Have you tried restoring your softwareyes
    yes I have

  • HT1695 I can't connect to my wifi network not even when it has no security on I get "unable to connect to network "netgear" anyone have this issue and maybe know how to fix it?

    Hi
    When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
    connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
    get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions

    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • WiFi -  unable to connect to home network

    I had a problem syncing and iTunes not recognizing my iPod touch, (and my new iPad). Did a restore on the iPod Touch and that solved the syncing problem, now I cannot connect to the WiFi in my home, (cannot connect with my new iPad either). I have a Linksys Wireless-N Broadband Router Model WRT160N. I am dying to connect the new iPad and get it up and running, etc. Can anyone help me solve the "Unable to connect to (my home network's name)".

    Use G band, not N. I encountered a lot of problems with my new router on wireless N. Here is a reply I wrote for the other posts about iPad connectivity problems:
    I have the base iPad 16gb Wi-Fi model and it was connecting to wifi fine. A few days ago I had to get a new modem/router. I bought a netgear dual band model (G and N) and used wireless "N" on my my two MacBooks and my iPad.
    Two days ago I started getting the "Safari could not open the page because the server stopped responding." error on the iPad along with the schizophrenic signal strength bars going from three, to one, to two, to disappearing totally, to whatever, and Safari not opening pages and sometimes crashing, and when it would connect running slower than molasses.
    My laptops worked fine, seeing both G and N and working equally well regardless of which I chose.
    I did all the jumping thru hoops I have read on this and various forums and that Apple suggested back in April with naming each band on the router differently but with same security settings, renewing lease on Safari, reseting iPad, resetting network settings, turning auto connect off, etc., etc., etc, none of it worked.
    So I started to wonder . . . does the iPad even work with "N" . . . the Apple site says "yes", but I wondered . . . what happens if I have the iPad ignore "N" and connect only with "G".
    Guess what . . . that fixed the problem.
    I went into Settings > WiFi > and told it to "Forget this Network" for the "N" band and then selected the "G" band.
    Problems gone.
    If you're experiencing the connection problems I'd bet dollars to doughnuts you're trying to use wireless "N". Have it ignore that band and use "G".     

  • TS1849 My iPod is not connect to wifi (unable to join the network)

    Please help me fast 

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Wifi unable to connect and incorrect password problem/issues

    since i updated to iOS5.1 i started having a problem with our wifi connection. it is locked but even though i enter the correct password my itouch is promting that i have punched in an icorrect password itried using a different iDevice and punched in the same password it's all good, they can connect in our wifi and most of the time i receive an error "unable to join the network" if im trying to connect to an open network. what seems to be the problem? can somebody help me with this one?

    - Reset the iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

Maybe you are looking for

  • Bex report does not display key figures

    Friends, Need help urgently. We have a report of a multicube(MC1). key figures of one of the infocube(IC1) in the multicube(MC1) does not showup on the report. If reported independly on that IC1 it does show all values. This sounds really weird but i

  • How can we  identify the mails from the mails that have been read previousy

    Hi i m using java mail api to fetch the mails. but i am facing a problem that is every time i fetch all the mails in my application. Is there any way by which i can set a flag or something so as to i can identify the mails which have been processed e

  • Import profit centers with DTW

    Hi All, Is it possible to import profit centers into the SAP B1 2007A with DTW, ? I have to create 50 profit centers in a company, I cannot find template to import profit centers in the DTW: Is it possible? Another way to use copy express, because th

  • How to  build a html5 project

    Hai all, I am developing a  html5 project on limejs.Now i want to build my project.   How can we build a html5 project.Any Idea?

  • R3load -testconnect fails while doing the Export Prepare

    Hi All, R3load -testconnect fails while doing the Export Prepare for the Unicode Conversion. I have upgraded the CRM system from CRM 4.0 to SAP Netweaver 7.0 with EHP1. Now I doing the Unicode Conversion. While using the sapinst as root to start the