WIFI univercity TUHH (Eduroam)
Hi people,
I am now using Lumia 1520 and i get a problem with connection to my uni WLAN(eduroam) TUHH
After search i see this network, then I'm trying to login with my username and pass and its says that connection is not possible
I will leave a link for my uni wlan center, probably someone can give me advice how can i connect my device
https://www.tuhh.de/rzt/wlan/eduroam.html
Its on german, sorry but thats all i have.
Waiting for ur answers.
Please post your question here:
http://answers.microsoft.com/en-us/winphone
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.
Similar Messages
-
WiFI authentication and Eduroam (EAP-TTLS / PAP)
Hi,
eduroam (EDUcation ROAMing) is the roaming infrastructure used by the international research and education community (universities).
At least in Australia and AFAIK also in Europe.
Most sites use EAP-TTLS / PAP authentication (and it appears there are good technical reasons for it).
The current Symbian OS does not support it out of the box.
(or at least I couldn't find it on my E51)
Is there any solution (application, etc) able to supply this functionality ?
Cheers.e61drc: thanks, indeed, you are correct.
bife71: the e51 have mschapv2 (guess what ms stands for which require an active directory backend while pap may use practically anything (e.g. an ldap) ... this being a good technical reason why large organizations may prefer pap.
Well, from a company claiming "Connecting People" I am rather disapointed.
(further research turned out that this feature have been widely requested for at least 1.5 years)
Cheers. -
Upgrade to Mavericks make Eduroam (WPA Enterprise) intermittent wifi
After upgrade to Mavericks, my MacBook Pro can't stay connected to eduroam for at leas 2 min following, it's always falling.. Any help, and after update to 10.9.2 the stability have dropped considerably..
Any help please..You're not alone. I have exactly the same wifi problem since the update to 10.9.2. I can't connect to eduroam or to my university wifi (WPA2 Enterprise). I have no IP adress assigned ! At the same time, I have no problem with my PC with Windows Seven ! I have the same problem with my iPhone (ios 7.0.6).
At home, my wifi is WPA2 Personnal and I have no problem nor with my Macbook, nor with my iPhone.
Thanks for your help. -
Hi
I have problem to get a stable connection (to an eduroam network). I find it, connect (maybe), the signal strengths going up and down (before connection: low; after: high, and then the signal finaly disappears (disconnect). I have tried others (eduroam networks) and the case is the same! I have also tried "normal" networks (not eduroam) and that works finely. what happens here - any solution?
/TommyI have solved the problem. I contacted the support center via web, and I got an e-mail telling me that none of the Nokia devices can connect to EAP-TTLS networks. I was very surprised because there is a post in the web of my Univerisity with instructions to connect a Nokia X6 to eduroam using that protocol. I contacted the support service at my University, and they told me that if Nokia said that it is not possible to connect a Nokia device, them, that is the end of the story
I received a feedback request from Nokia asking me about my satisfaction from the support Center, and my answer was that I was very dissatisfied. Minutes after my reply I got a telephone call from the Nokia Support Center apologizing for giving me misleading information. They them suggested me to go to a nearby local center to restore the operating system.
What I have done is to restore the phone to using OVI to the original setting that I saved, and I have followed one more time the instructions posted for the X6 and, voilá, the phone now connect to the eudoram. -
Wifi disconnects on highish throughput
Hi,
I've got wireless problems with the combination of my router and my laptop. Whenever I download something more than say 1MB the connection drops. This happens with Youtube, Google Image search and Pacman updates. The connection re-establishes after a few seconds to drop out again some 10-15 seconds later. This continues until either the download fails or is finished.
On the university, which uses eduroam, I've got no problems connecting and no problems downloading.
I'm using wpa_supplicant to connect, which is started by dhcpd. The settings for the connection with my router are as basic as could be, only an SSID and PSK are given in the configuration file.
What I've tried so far:
Update system with pacman. No success
Change router to mixed BG only, no N. No success
Turned power management off. No success
I've had the problem a few weeks back, but then changing the config file to a minimum fixed the problem.
On Windows 8.1 the wifi seems to work fine.
Does anyone have a clue on how to fix this?
Hardware info, lspci -vv:
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
Connection info iwconfig:
wlp3s0 IEEE 802.11abgn ESSID:"Sacred"
Mode:Managed Frequency:2.447 GHz Access Point: F8:D1:11:B7:29:A4
Bit Rate=54 Mb/s Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=70/70 Signal level=-29 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:3 Invalid misc:145 Missed beacon:0
Some extensive debug from wpa_supplicant:
EAPOL: disable timer tick
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 operstate=2 linkmode=1 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp3s0
nl80211: Delete station f8:d1:11:b7:29:a4
nl80211: Event message available
nl80211: Drv Event 40 (NL80211_CMD_DISASSOCIATE) received for wlp3s0
nl80211: MLME event 40 (NL80211_CMD_DISASSOCIATE) on wlp3s0(c4:85:08:92:41:b8) A1=c4:85:08:92:41:b8 A2=f8:d1:11:b7:29:a4
nl80211: MLME event frame - hexdump(len=26): a0 00 40 01 c4 85 08 92 41 b8 f8 d1 11 b7 29 a4 f8 d1 11 b7 29 a4 b0 d9 22 00
nl80211: Disassociate event
wlp3s0: Event DISASSOC (1) received
wlp3s0: Disassociation notification
wlp3s0: * reason 34
wlp3s0: * address f8:d1:11:b7:29:a4
Disassociation frame IE(s) - hexdump(len=0): [NULL]
wlp3s0: SME: Disassociation event received
wlp3s0: SME: Deauthenticate to clear driver state
wpa_driver_nl80211_deauthenticate(addr=f8:d1:11:b7:29:a4 reason_code=3)
wlp3s0: nl80211: MLME command failed: reason=3 ret=-107 (Transport endpoint is not connected)
wlp3s0: CTRL-EVENT-DISCONNECTED bssid=f8:d1:11:b7:29:a4 reason=34
wlp3s0: Auto connect enabled: try to reconnect (wps=0 wpa_state=9)
wlp3s0: Setting scan request: 0.100000 sec
Added BSSID f8:d1:11:b7:29:a4 into blacklist
wlp3s0: Blacklist count 1 --> request scan in 100 ms
wlp3s0: Ignore new scan request for 0.100000 sec since an earlier request is scheduled to trigger sooner
TDLS: Remove peers on disassociation
wlp3s0: Disconnect event - remove keys
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=0 addr=0x7cfa10 key_idx=0 set_tx=0 seq_len=0 key_len=0
addr=f8:d1:11:b7:29:a4
wlp3s0: State: COMPLETED -> DISCONNECTED
nl80211: Set wlp3s0 operstate 1->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
nl80211: Event message available
nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp3s0
nl80211: Ignore disconnect event when using userspace SME
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 wext ifi_flags=0x1003 ([UP])
wlp3s0: State: DISCONNECTED -> SCANNING
wlp3s0: Starting AP scan for wildcard SSID
wlp3s0: Add radio work 'scan'@0x7efad0
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'scan'@0x7efad0 after 0.000006 second wait
wlp3s0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
wlp3s0: nl80211: Scan trigger
wlp3s0: Event SCAN_STARTED (49) received
wlp3s0: Own scan request started a scan in 0.000018 seconds
wlp3s0: CTRL-EVENT-SCAN-STARTED
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
wlp3s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825
wlp3s0: Event SCAN_RESULTS (3) received
wlp3s0: Scan completed in 3.280062 seconds
nl80211: Received scan results (40 BSSes)
wlp3s0: BSS: Start scan result update 3
wlp3s0: BSS: Add new id 38 BSSID ac:cf:23:2e:7f:58 SSID 'LEDnetkamerlicht'
wlp3s0: BSS: Add new id 39 BSSID c8:d7:19:ed:c4:bb SSID 'Christina, where's your nipple?'
wlp3s0: BSS: Add new id 40 BSSID 00:25:9c:bc:e0:ab SSID 'Hoogendijk'
wlp3s0: BSS: Remove id 16 BSSID b0:48:7a:99:b5:bc SSID 'Matrix' due to no match in scan
BSS: last_scan_res_used=40/64
wlp3s0: New scan results available (own=1 ext=0)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: AP c4:04:15:3d:f8:00 type 0 added
WPS: AP c4:04:15:3d:f7:ff type 0 added
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: AP f8:1a:67:7f:62:8e type 0 added
WPS: AP 00:16:0a:1e:a7:d8 type 0 added
WPS: AP 6c:fd:b9:30:93:f0 type 0 added
WPS: AP 64:d1:a3:1d:d9:f4 type 0 added
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: AP 64:66:b3:4f:ed:69 type 0 added
WPS: AP 00:23:69:2e:1a:cf type 0 added
WPS: AP e0:46:9a:5d:f7:91 type 0 added
WPS: AP 00:0c:f6:6b:20:68 type 0 added
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: AP f8:1a:67:05:3c:66 type 0 added
WPS: AP 68:7f:74:a5:06:c6 type 0 added
WPS: AP 20:aa:4b:82:94:13 type 0 added
WPS: AP 00:0c:f6:6e:c1:ac type 0 added
WPS: AP c8:d7:19:ed:c4:bb type 0 added
WPS: AP 00:25:9c:bc:e0:ab type 0 added
WPS: AP f8:d1:11:b9:95:d2 type 0 added
WPS: AP 00:0c:f6:46:35:24 type 0 added
WPS: AP f0:7d:68:55:e8:f2 type 0 added
WPS: AP 80:1f:02:46:75:6c type 0 added
WPS: AP 00:0c:f6:71:3c:d4 type 0 added
WPS: AP[0] c4:04:15:3d:f8:00 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[1] c4:04:15:3d:f7:ff type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[2] f8:1a:67:7f:62:8e type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[3] 00:16:0a:1e:a7:d8 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[4] 6c:fd:b9:30:93:f0 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[5] 64:d1:a3:1d:d9:f4 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[6] 64:66:b3:4f:ed:69 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[7] 00:23:69:2e:1a:cf type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[8] e0:46:9a:5d:f7:91 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[9] 00:0c:f6:6b:20:68 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[10] f8:1a:67:05:3c:66 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[11] 68:7f:74:a5:06:c6 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[12] 20:aa:4b:82:94:13 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[13] 00:0c:f6:6e:c1:ac type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[14] c8:d7:19:ed:c4:bb type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[15] 00:25:9c:bc:e0:ab type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[16] f8:d1:11:b9:95:d2 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[17] 00:0c:f6:46:35:24 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[18] f0:7d:68:55:e8:f2 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[19] 80:1f:02:46:75:6c type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[20] 00:0c:f6:71:3c:d4 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
wlp3s0: Radio work 'scan'@0x7efad0 done in 3.283504 seconds
wlp3s0: Selecting BSS from priority group 0
wlp3s0: 0: f8:d1:11:b7:29:a4 ssid='Sacred' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-30
wlp3s0: skip - SSID mismatch
wlp3s0: skip - SSID mismatch
wlp3s0: skip - SSID mismatch
wlp3s0: skip - SSID mismatch
wlp3s0: selected based on RSN IE
wlp3s0: selected BSS f8:d1:11:b7:29:a4 ssid='Sacred'
wlp3s0: Considering connect request: reassociate: 0 selected: f8:d1:11:b7:29:a4 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x7d1b30 current_ssid=(nil)
wlp3s0: Request association with f8:d1:11:b7:29:a4
WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 00 06 53 61 63 72 65 64
WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 03 01 08
WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 2a 01 04
WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 0c 00
TDLS: TDLS is allowed in the target BSS
wlp3s0: Add radio work 'sme-connect'@0x7f6460
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'sme-connect'@0x7f6460 after 0.000009 second wait
wlp3s0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
RSN: Search for BSSID f8:d1:11:b7:29:a4
RSN: No PMKSA cache entry found
wlp3s0: RSN: using IEEE 802.11i/D9.0
wlp3s0: WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 2
wlp3s0: WPA: Selected mgmt group cipher 32
wlp3s0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 0c 00
wlp3s0: WPA: using GTK TKIP
wlp3s0: WPA: using PTK TKIP
wlp3s0: WPA: using KEY_MGMT WPA-PSK
wlp3s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 00 00
wlp3s0: Cancelling scan request
wlp3s0: SME: Trying to authenticate with f8:d1:11:b7:29:a4 (SSID='Sacred' freq=2447 MHz)
wlp3s0: State: SCANNING -> AUTHENTICATING
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
nl80211: Authenticate (ifindex=2)
* bssid=f8:d1:11:b7:29:a4
* freq=2447
* SSID - hexdump_ascii(len=6):
53 61 63 72 65 64 Sacred
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 wext ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp3s0
nl80211: New station f8:d1:11:b7:29:a4
nl80211: Event message available
nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp3s0
nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp3s0(c4:85:08:92:41:b8) A1=c4:85:08:92:41:b8 A2=f8:d1:11:b7:29:a4
nl80211: MLME event frame - hexdump(len=30): b0 00 40 01 c4 85 08 92 41 b8 f8 d1 11 b7 29 a4 f8 d1 11 b7 29 a4 30 de 00 00 02 00 00 00
nl80211: Authenticate event
wlp3s0: Event AUTH (11) received
wlp3s0: SME: Authentication response: peer=f8:d1:11:b7:29:a4 auth_type=0 auth_transaction=2 status_code=0
SME: Authentication response IEs - hexdump(len=0): [NULL]
wlp3s0: set_disable_max_amsdu: -1
wlp3s0: set_ampdu_factor: -1
wlp3s0: set_ampdu_density: -1
wlp3s0: set_disable_ht40: 0
wlp3s0: set_disable_sgi: 0
wlp3s0: Trying to associate with f8:d1:11:b7:29:a4 (SSID='Sacred' freq=2447 MHz)
wlp3s0: State: AUTHENTICATING -> ASSOCIATING
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 00 00
nl80211: Associate (ifindex=2)
* bssid=f8:d1:11:b7:29:a4
* freq=2447
* SSID - hexdump_ascii(len=6):
53 61 63 72 65 64 Sacred
* IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 00 00 7f 08 00 00 00 00 00 00 00 40
* WPA Versions 0x2
* pairwise=0xfac02
* group=0xfac02
nl80211: Association request send successfully
nl80211: Event message available
nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp3s0
nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp3s0(c4:85:08:92:41:b8) A1=c4:85:08:92:41:b8 A2=f8:d1:11:b7:29:a4
nl80211: MLME event frame - hexdump(len=72): 10 00 40 01 c4 85 08 92 41 b8 f8 d1 11 b7 29 a4 f8 d1 11 b7 29 a4 40 de 11 04 00 00 01 c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
nl80211: Associate event
wlp3s0: Event ASSOC (0) received
wlp3s0: Association info event
resp_ies - hexdump(len=42): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
wlp3s0: freq=2447 MHz
wlp3s0: State: ASSOCIATING -> ASSOCIATED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp3s0: Associated to a new BSS: BSSID=f8:d1:11:b7:29:a4
wlp3s0: Associated with f8:d1:11:b7:29:a4
wlp3s0: WPA: Association event - clear replay counter
wlp3s0: WPA: Clear old PTK
TDLS: Remove peers on association
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_BE entering state IDLE
wlp3s0: Setting authentication timeout: 10 sec 0 usec
wlp3s0: Cancelling scan request
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 operstate=5 linkmode=1 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 wext ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 wext ifi_flags=0x11003 ([UP][LOWER_UP])
nl80211: Event message available
nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp3s0
nl80211: Ignore connect event (cmd=46) when using userspace SME
wlp3s0: RX EAPOL from f8:d1:11:b7:29:a4
RX EAPOL - hexdump(len=99): 01 03 00 5f 02 00 89 00 20 00 00 00 00 00 00 00 01 1b 2c 85 e1 20 25 da f0 83 37 b2 95 40 b0 7f 87 05 45 28 21 3a 7e cc 26 62 7f b7 9d 73 d5 2d 45 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0: Setting authentication timeout: 10 sec 0 usec
wlp3s0: IEEE 802.1X RX: version=1 type=3 length=95
wlp3s0: EAPOL-Key type=2
wlp3s0: key_info 0x89 (ver=1 keyidx=0 rsvd=0 Pairwise Ack)
wlp3s0: key_length=32 key_data_length=0
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
key_nonce - hexdump(len=32): 1b 2c 85 e1 20 25 da f0 83 37 b2 95 40 b0 7f 87 05 45 28 21 3a 7e cc 26 62 7f b7 9d 73 d5 2d 45
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 00 89 00 20 00 00 00 00 00 00 00 01 1b 2c 85 e1 20 25 da f0 83 37 b2 95 40 b0 7f 87 05 45 28 21 3a 7e cc 26 62 7f b7 9d 73 d5 2d 45 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0: State: ASSOCIATED -> 4WAY_HANDSHAKE
wlp3s0: WPA: RX message 1 of 4-Way Handshake from f8:d1:11:b7:29:a4 (ver=1)
RSN: msg 1/4 key data - hexdump(len=0):
WPA: Renewed SNonce - hexdump(len=32): c0 0f fe b9 af ab d8 85 a9 1b aa 3c 3f 68 8e 01 b4 71 70 90 bd 90 86 cd b1 44 87 9f 19 d6 44 3b
WPA: PTK derivation - A1=c4:85:08:92:41:b8 A2=f8:d1:11:b7:29:a4
WPA: Nonce1 - hexdump(len=32): c0 0f fe b9 af ab d8 85 a9 1b aa 3c 3f 68 8e 01 b4 71 70 90 bd 90 86 cd b1 44 87 9f 19 d6 44 3b
WPA: Nonce2 - hexdump(len=32): 1b 2c 85 e1 20 25 da f0 83 37 b2 95 40 b0 7f 87 05 45 28 21 3a 7e cc 26 62 7f b7 9d 73 d5 2d 45
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 00 00
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlp3s0: WPA: Sending EAPOL-Key 2/4
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): 54 a5 2d 53 ab 9d 26 1f 03 32 3d c0 5a fd 57 5c
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 09 00 00 00 00 00 00 00 00 00 01 c0 0f fe b9 af ab d8 85 a9 1b aa 3c 3f 68 8e 01 b4 71 70 90 bd 90 86 cd b1 44 87 9f 19 d6 44 3b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 54 a5 2d 53 ab 9d 26 1f 03 32 3d c0 5a fd 57 5c 00 16 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 00 00
wlp3s0: RX EAPOL from f8:d1:11:b7:29:a4
RX EAPOL - hexdump(len=161): 01 03 00 9d 02 13 c9 00 20 00 00 00 00 00 00 00 02 1b 2c 85 e1 20 25 da f0 83 37 b2 95 40 b0 7f 87 05 45 28 21 3a 7e cc 26 62 7f b7 9d 73 d5 2d 45 c5 e6 d0 8f e2 6c 63 56 44 9b ad 25 f8 10 73 c8 73 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6c 10 77 99 a6 8e 92 04 db 0d e2 7d db b7 a5 9d 00 3e 50 00 b8 c8 bf f2 7e 41 d7 ff 0c 09 d6 fa 0c d3 47 af 3d 4a 09 84 67 83 c7 8b 19 44 ab 5b d7 fc 72 e8 f9 e9 8d d4 b9 f1 66 aa e8 0b 02 db 6a df c3 b6 ba 1b 73 cb 39 0c 43 b9 eb 5c 07 7e
wlp3s0: IEEE 802.1X RX: version=1 type=3 length=157
wlp3s0: EAPOL-Key type=2
wlp3s0: key_info 0x13c9 (ver=1 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
wlp3s0: key_length=32 key_data_length=62
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
key_nonce - hexdump(len=32): 1b 2c 85 e1 20 25 da f0 83 37 b2 95 40 b0 7f 87 05 45 28 21 3a 7e cc 26 62 7f b7 9d 73 d5 2d 45
key_iv - hexdump(len=16): c5 e6 d0 8f e2 6c 63 56 44 9b ad 25 f8 10 73 c8
key_rsc - hexdump(len=8): 73 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 6c 10 77 99 a6 8e 92 04 db 0d e2 7d db b7 a5 9d
WPA: RX EAPOL-Key - hexdump(len=161): 01 03 00 9d 02 13 c9 00 20 00 00 00 00 00 00 00 02 1b 2c 85 e1 20 25 da f0 83 37 b2 95 40 b0 7f 87 05 45 28 21 3a 7e cc 26 62 7f b7 9d 73 d5 2d 45 c5 e6 d0 8f e2 6c 63 56 44 9b ad 25 f8 10 73 c8 73 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6c 10 77 99 a6 8e 92 04 db 0d e2 7d db b7 a5 9d 00 3e 50 00 b8 c8 bf f2 7e 41 d7 ff 0c 09 d6 fa 0c d3 47 af 3d 4a 09 84 67 83 c7 8b 19 44 ab 5b d7 fc 72 e8 f9 e9 8d d4 b9 f1 66 aa e8 0b 02 db 6a df c3 b6 ba 1b 73 cb 39 0c 43 b9 eb 5c 07 7e
RSN: encrypted key data - hexdump(len=62): 50 00 b8 c8 bf f2 7e 41 d7 ff 0c 09 d6 fa 0c d3 47 af 3d 4a 09 84 67 83 c7 8b 19 44 ab 5b d7 fc 72 e8 f9 e9 8d d4 b9 f1 66 aa e8 0b 02 db 6a df c3 b6 ba 1b 73 cb 39 0c 43 b9 eb 5c 07 7e
WPA: decrypted EAPOL-Key key data - hexdump(len=62): [REMOVED]
wlp3s0: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
wlp3s0: WPA: RX message 3 of 4-Way Handshake from f8:d1:11:b7:29:a4 (ver=1)
WPA: IE KeyData - hexdump(len=62): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 0c 00 dd 26 00 0f ac 01 02 00 35 7c eb 58 e4 43 0f c5 5e ba d4 e4 88 8f 11 b7 87 7c cd 93 9f 73 a4 6c a3 c8 95 5b db 92 40 6a
WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 0c 00
WPA: GTK in EAPOL-Key - hexdump(len=40): [REMOVED]
wlp3s0: WPA: Sending EAPOL-Key 4/4
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): a7 52 42 cc b1 b6 b5 c0 71 8f 7c a0 85 bc a0 fb
WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 09 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a7 52 42 cc b1 b6 b5 c0 71 8f 7c a0 85 bc a0 fb 00 00
wlp3s0: WPA: Installing PTK to the driver
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=2 addr=0x7d2748 key_idx=0 set_tx=1 seq_len=6 key_len=32
addr=f8:d1:11:b7:29:a4
EAPOL: External notification - portValid=1
wlp3s0: State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RSN: received GTK in pairwise handshake - hexdump(len=34): [REMOVED]
WPA: Group Key - hexdump(len=32): [REMOVED]
wlp3s0: WPA: Installing GTK to the driver (keyidx=2 tx=0 len=32)
WPA: RSC - hexdump(len=6): 73 00 00 00 00 00
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=2 addr=0x4f9e43 key_idx=2 set_tx=0 seq_len=6 key_len=32
broadcast key
wlp3s0: WPA: Key negotiation completed with f8:d1:11:b7:29:a4 [PTK=TKIP GTK=TKIP]
wlp3s0: Cancelling authentication timeout
Removed BSSID f8:d1:11:b7:29:a4 from blacklist
wlp3s0: State: GROUP_HANDSHAKE -> COMPLETED
wlp3s0: Radio work 'sme-connect'@0x7f6460 done in 0.032118 seconds
wlp3s0: CTRL-EVENT-CONNECTED - Connection to f8:d1:11:b7:29:a4 completed [id=4 id_str=]
nl80211: Set wlp3s0 operstate 0->1 (UP)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=6 (IF_OPER_UP)
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAP: EAP entering state DISABLED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: Supplicant port status: Authorized
nl80211: Set supplicant port authorized for f8:d1:11:b7:29:a4
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed - result=SUCCESS
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 operstate=6 linkmode=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
EAPOL: startWhen --> 0
EAPOL: disable timer tick
Last edited by shoogendijk (2014-07-11 09:32:28)Mabye disabling power management helps
iw wlp3s0 set power_save off -
My OSX 10.7.5 iMac (late 2011) will connect to my university's wireless network and thinks it's connected to the internet, but cannot resolve any DNS - and cannot actually access the internet on any browser or internet-utilising app. My university has 2 networks, a regular wifi one and an eduroam one. I have the same problem on both networks. My MacBook, running Snow Leopard, and my iPad (latest software) both connect to both networks just fine.
Because it's my university's network, i can't reset my router or anything like that. I'm in halls. I don't think it's a network issue, because all my other devices are fine.
I've searched high and low on these forums but haven't found anyone having exactly the same problem as me - I've heard of odd few minutes of people losing their connections in this manner, but my computer's been down now for hours and nothing. I've restarted it many times, even once in "Recovery Mode" and I'm getting nothing. I've followed instructions to flush my DNS cache, renew DHCP leases, I've tried manually inputting various DNSes I've found (eg the 8.8.8.8 and 8.8.4.4 google ones), none of which have worked.
Using terminal, I can't ping either an http:// domain, or an IP address. Both get "timed out" as a response. I can't access the internet on any browser (chrome, safari, firefox), my google mail notifier, Skype, or my twitter app. Or anything else.
I'm relatively computer literate, but I'm not particularly code-savvy, so I'd really appreciate it if I could get some step-by step help on here, bearing in mind what I've already tried. I'm really worried, because it all seems to have happened completely out of the blue. Last time I updated was some time a couple weeks ago; I update whenever my software update beeps at me.
Thanks.
link.Go step by step and test.
1.Power Cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
2. Turn off Extensions, if any.
Safari > Preferences > Extensions
3. Turn off proxies, if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply"
4. Uninstall anti-virus software, if any. -
Can't connect to Eduroam on my WP 8 Nokia Lumia 930
Hi!
So, I just got the new Lumia 930, which I am very happy with, however I can not seem to get it to connect to Eduroam at the university I work at. When I go to the page where I am suppose to 'join' or 'download' whatever I need, 'securew2', (using the phone)
it detects that I am using a Windown Phone, but it only just gives me settings to 'configure my device'. Such as:
SecurityType:WPA2-Enterprise
Encryption: AES
EAP Type: TTLS
Inner EAP Type: PAP
CA Certificate: UTN-USERFirst-Hardware, AddTrust etc..
When I then go into WiFi and click on Eduroam, I try to log in with my user-credentials. I can also look through a list of certificates but none of them seem to be the right one. The only choice I really get is the EAP-method, where I change it from PEAP
MA-CHAP v2 (which did not work) to TTLS. Then I am asked to verify that it is the right network, which it is - with the name of the university and everything - I click OK....and then there is a full stop. I only get a 'can't connect' message. Very frustrating.
I talked to the IT people at here, and they verified my user credentials, and told me that people with Windows Phones had trouble connecting to Eduroam.
As should be abundantly clear by now I am technologically challenged, so please help help help me fix this. If for no other reason then to silence my snickering, iPhone-loving colleagues.Hello,
Did you find a solution for this issue?
I just bought a Nokia Lumia 735 and I have the same problem. Unable to connect the Eduroam network in my laboratory. It seem that I have to put an other certificate which is not on my device (from TERENA), and I did not find how to do it.
It is a bit disappointing to be blocked on such a new device. My previous phone, an old Iphone 3gs, was able to connect very easily...
Please help, or I will regret my choice to switch on Windows Phone (if I add the poor choice regarding the apps on the Store...).
Regards. -
Connecting myRIO to WiFi with WPA2 Enterprise EAP-TTLS
Hey guys,
I´m struggling to connect my myRIO to the eduroam wifi on campus. It worked for a time, but now it suddenly just doesn´t.
The network runs a EAP-TTLS (or PEAP) Authentification, MSCHAPv2 as an inner authentification and a GT UserTrust Global Root certificate. When I first got it working I just set it up in MAX and uploaded the certificate, when that now stopped working I´ve tried just about everything including editing the wpa_supplicant locally on the myRIO.
To put it short I´m stumped at this, and the fact that it worked for a while doesn´t help O.o
Cheers,
BjørnHi bjornsol,
I managed to connect a wireless cDAQ to eduroam by
Uploading the certificate in MAX
Entering the user name and network secret for PEAP, IP adress set to "DHCP or Link Local"
I can also confirm successfully accessing the device from a eduroam connected computer. Remember to configure a password for your device, it will otherwise be accessible to other eduroam users.
Ask the IT department at your university for a valid certificate. I downloaded this certificate from the KTH eduroam web page, not sure it will work for you if you are registered at another university.
If this doesn't work for you, please upload a screenshot from MAX when trying to connect to the network.
Best regards,
Robert P-F
Applications Engineer
National Instruments Sweden -
Why does the WPA Enterprise Wifi Network not get displayed?
I wanted to connect to the wifi of my university via eduroam and was not able to even get the eduroam network displayed in the list of Wifi networks. I'm sure that it was there, because I tried it on several spots and my laptop was always able to find it and connect to it. Could it be that WPA Enterprise is not supported? It's quite standard already, isn't it?
There would be a second option to connect to an open network and add a VPN tunnel, but I could not find any vpn-Application for Firefox OS.
Did I oversee something or is there really no possibility to access any of my university networks?
I am using an Alcatel One Touch Fire (German language set) with current Firefox OS 1.1.0.0-prereleaseIt seems to me that WPA Enterprise is not currently enabled in Firefox OS.
There are several bugs regarding this feature, among others: https://bugzilla.mozilla.org/show_bug.cgi?id=790056
Regarding VPN, there is a recent thread, which also indicates that this feature is not currently supported. See the discussion here:
https://support.mozilla.org/en-US/questions/967948
It also lists the bug-id related to this features. -
"Wifi: No Hardware Installed" Macbook Pro 10.7.5
My Macbook has recently been having issues with the Wi-Fi. I had faulty hardware and had it replaced. After I got it back the wifi worked fine for about two weeks but then it started having issues again. I took it back in and they whipped the hard drive so I took it back to my schools IT and they installed our eduroam wifi software as well as microsoft office programs. They then dualbooted my computer with a windows side. Everything worked for a few days but now It says no hardware is installed. I have ran a hardware check(option+D, extended test) and it says everything is fine. I dont know what to do. Please help me!!!
Sorry, but not sure what your question has to do with an Apple router.....the AirPort Express, AirPort Extreme or Time Capsule. One of these devices:
http://www.apple.com/compare-wifi-models/
You will likely receive a much faster and more informed answer if you post your question in the MacBook Pro community support area. The link is just below:
MacBook Pro -
Blackberry 9300 g3 curve and Eduroam
I have recently bought a Blackberry 9300 3g curve but I am not able to connect to Eduroam at my work (University of Twente) and I am frustrated. I tried several things but simply it did not connect. However, I can connect to the WiFi network of the university if I login as a guest. But it is valid for one day only. I am sure that some one must have found a way to connect to Eduroam in the Netherlands and will be very grateful if you can help me in setting up my blackberry.
clarereardon wrote:
Hi,
My sons phone was working fine and then his screen is now black, the keys still light up and when you call the phone it rings as normal and you can answer it, and it beeps when you get a bbm message, but you can not view anything on the screen - any idea's on what could be the matter>
Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Rtl8187se (MSI Wind) netcfg wpa_suplicat (eduroam) not working
Hello boys and girls,
I try to connect to wifi on school with my MSI Wind.
I try to connect with this driver http://aur.archlinux.org/packages.php?ID=20673
and then with ndiswrapper this windows drivers http://driverscollection.com/?H=RTL8187SE&By=RealTek (ndiswrapper not working "scan nothing")
and i have this error
sudo netcfg eduroam
:: eduroam up - wpa_supplicant did not start, possible configuration [FAIL]
my /etc/wpa_suplicant.conf (its configuration from wicd "working" http://wicd.net/punbb/viewtopic.php?id=275 )
network={
ssid="eduroam"
scan_ssid=1
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="pass"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
my /etc/network.d/eduroam
CONNECTION="wireless"
INTERFACE=wlan0
SCAN="no"
SECURITY="wpa-config"
ESSID="eduroam"
IP="dhcp"
TIMEOUT=10
DHCP_TIMEOUT=20
WPA_CONF="/etc/wpa_supplicant.conf"
I don't know where is mistake.
Last edited by zajca (2008-11-26 10:36:31)I try manual wpa_suplicant (same configuration)
and this is issue
[zajca@netbook ~]$ sudo wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf
Line 565: unknown EAP method 'SIM'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 565: failed to parse eap 'SIM'.
Line 568: failed to parse network block.
Line 575: unknown EAP method 'PSK'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 575: failed to parse eap 'PSK'.
Line 579: failed to parse network block.
Line 611: unknown EAP method 'FAST'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 611: failed to parse eap 'FAST'.
Line 617: failed to parse network block.
Line 622: unknown EAP method 'FAST'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 622: failed to parse eap 'FAST'.
Line 628: failed to parse network block.
Failed to read or parse configuration '/etc/wpa_supplicant.conf'. -
Hi everyone,
I've got a very strange problem:
At University I use the eduroam WiFi Network, everything works fine with that. But somehow the Q5 won't disconnect properly: when I'm back home it still says conneted to eduroam, which is of course far out of range already. That wouldn't be much of a problem if I could at least disconnect, but that doesn't work either. Instead I have to restart to be able to connect to my home WiFi again.
Has anyone got an idea, what's going worng?
Thanks!Do you have a data plan as well? If yes try disabling it and try again!
-
IOS mail client not working in certain wifi networks
Hey,
this is driving me crazy:
When I use my iPad or iPhone within our universities eduroam wifi network, receiving and sending mails does not work.
I am using a google apps account. One would say, ok that's due to some IMAP and SMTP port blocking. However it isn't. Using my android phone with the same settings it just wouldn't work ... Never!
Using my iPad in other networks works just fine ...
Please help me with some suggestions.
JacobIt could be the network, but what surprises me is that nothing else is being blocked at all. And I can't seem to change the port that Mail is on. I tried a port scan, and it came up that that port is blocked (993), but it also came up that every other port I tried was also blocked. I used a Mac to do a Port Scan for my iPad's IP, but it wasn't detecting any open ports. So I don't know if it is an issue with the network, or perhaps with my iOS devices. The network has 802.1X security I believe (I need a username and password to login), so unsure if this would affect it at all?
-
Apple configurator installing wlan profile eduroam fails
Hey,
i want to use apple configurator to install a wifi profile on some ipads. the preparing works but when i'm in supervising mode and try to install the profile there comes an error message with following error codes:
4001 profile installation fails
4001 profile couldn't be installed
1009 the profile "xxx" could not be installed
13000 wifi network "eduroam" could not be installed
13004 wifi network "eduroam" could not be configured for EAP
all i want is that the user has to enter his username and password when the wifi network appears because every staff member has it's own.
It would be great if anyone could help me!Thank you kind sir. I have contacted Meraki to ask the all-important question of "Y U NO CHARGE MONIES?" and got a very helpful representative. I'm signed up now and going to start reading their documentation.
As far as the 16-port hub, I agree a larger one would be nice once I know what I'm doing but again I'm trying to be fiscally responsible with the tax-payer money we use. Many deployment models I read about online suggested keeping yourself to 15-20 devices at a time instead of going for the 30 device Apple says or the 49-port sync that Datamation has. I appreciate the feedback though. If this pilot expands I will feel more comfortable suggesting the purchase of additional equipment.
Maybe you are looking for
-
I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted
-
Limit the number of Rows in View Obj
Hi, I use jdeveloper 11.1.1.6.0 I have a View Obj with more than 100 rows, when I drag it as table in my page, I want to display only 10 first row. I know I can set it in the tuning part of View Obj but I can't use this way, because I have more than
-
Restoring iweb site from idisk
My hard drive from a Mac with OS 10.4.11 recently died a painful death and was unrecoverable. My files were unfortunately not backed up as they should have been (lesson learned). I have a new Mac and am trying to be able to access my iweb site withou
-
Hi, Just a little question : We Are on a Windows MSSQL environnement did a fresh upgrade of our landscape ECC6 old SP -> EHP4 stack 5 made a copy of our system -> update on this copy now I'd like to do 2 things 1 copy of the updated system on a blank
-
Respond attributes in Workflow notification
Hi I added 4 respond attributes in my notification message. Now these parameters come automatically in the notification as input fields. My question is that can we control the size of the input boxes that appear in the notification for these respond