WiFi Webcam (ethernet based) for my G4?

I am looking at getting a wifi webcam to keep an eye on my new puppy while i'm at work during the day over the net. I can't seem to find anything for a mac - only pc (go figure).
Anyone have any ideas? If it was ethernet based (not usb based due to location issues) that would be great.
Thanks

Hi-
Check this page:
http://www.bensoftware.com/ss/installationmanual/networkcameras.html

Similar Messages

Is there a WiFi Webcam for my G4?

I have a PowerPC G4, and am looking for a WiFi webcam. I would like to be able to watch my new puppy at home throughout the day while i'm at work.
There are a few choices for the PC - but I can't find anything for the Mac.
Anyone?!
Thanks,
D

Photecs wrote:
I have a PowerPC G4, and am looking for a WiFi webcam. I would like to be able to watch my new puppy at home throughout the day while i'm at work.
There are a few choices for the PC - but I can't find anything for the Mac.
Anyone?!
Thanks,
D
PS... it doesn't have to be WiFi.
I have access to an ethernet connection in the location I want to put it.
Just a webcam that I can access remotely from work.
Hello D,
I would keep my Mac and its connecting cables locked up as far from a puppy as possible.
If you cannot take your puppy with you or get a puppy sitter so he is not afraid of being alone,
use a stand-alone wifi security camera instead.
EZ Jim
PS... the security camera may not need to be WiFi, either.
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Can wifi and ethernet be used same time for time machine?

Hi
Can an ethernet cable be used for the big backups with wifi being used for interim backups?
It seems the wifi method is ok for working in another room, albeit very slow. But when i am near the time machine unit would it be possible to backup via an ethernet cable and if so how would i set this method up?
ANy help appreciated.
Rgds
kev

Yes, it is possible for a computer to have two (or, if you have a tower, even more) IP addresses. By default the computer will use the one that is first on the list in the network panel in System Preferences.

Any fix yet for wifi and ethernet disconnect?

Running a 17" MacBook Pro with intel. NEVER had a problem with internet connection through wifi or ethernet. Upgraded from Snow Leopard to Lion and was dropping internet connection every 20 minutes or so. All other household devices worked fine including iPad, iPhone and other Mac laptop. Reinstalled Snow Leopard and problem is gone. Either give me a fix or return my $30.00. I am very disappointed. Faulty operating systems are the reason I left Microsoft 5 years ago. C'mon guys, APPLE is better then that!

I appreciate your quick response. I was hoping for an Apple update before taking the time to reinstall Lion, try a few things and if unsuccessful, reinstall Snow Leopard again. My laptop is pretty much useless to me without reliable Internet connection. Thank you for the tip, I'll try it when I have some down time.

Screen sharing - wifi and ethernet

I have a Macbook on an Airport-based network and an iMac on an ethernet network on a Netgear router. The Airport is plugged into the Netgear router. I would like to get the wifi-based Macbook to control the screen of the ethernet-based iMac. I have followed all the instructions as far as I can tell, but have so far had no success. I can connect the two using the Finder 'Go' option but not control the screen. Anyone got any tips for setting this up?

Have you tried Finder -> Go -> Connect to server -> vnc://imac.address
I am concerned about the fact that you mention "Airport-based network" and then in the same sentence "Netgear router".
That makes me think (as I assum cabeandsuz) that you have both a Netgear router *AND* an Apple Airport Extreme or Airport Express router runnin in your home.
If you do NOT have an Apple router, then ignore the following:
If you do have both Apple and Netgear routers, then you may have 2 active routers in your home, and the Bonjour auto discovery protocols will NOT travel between routers. So your MacBook on the Airport Extreme or Airport Express router would not be able to see the iMac on the Netgear router, and the reverse would be the case because you are crossing a router boundary.
Airport Extreme and Airport Express routers can be put into "Bridge" mode via Applications -> Utilities -> Airport Utility -> Internet -> Share an internet connection -> Bridge. (or something like that). That would turn off the routing fuctions in the Airport Extreme or Airport Express and turn it into just an ethernet to WiFi bridge extending the existing Netgear router's subnet, so everyone is on the same subnet, and Bonjour protocols can access all your home computers.

I can't connect to Internet anymore (WIFI or Ethernet). This was working perfectly before. I don't get a proper IP address from my ADSL box and it seems there is a DNS error when accessing the Internet.

I have an issue with my MacBook pro (MAC OS X 10.8.3) when trying to access Internet. I am behind an ADSL box (Orange). I have a PC on the same LAN which accesses Internet perfectly via the same Box.
On the MAC, I have tried WIFI and Ethernet. And have same issue on both. I have checked the IP address (the ADSL box is a DHCP server) but the MAC doesn't get a proper IP and network mask I tried a manual IP address setup and it doesn't get better. I have setup the DNS servers for my Internet provider, but I get DNS error. I have tried 2 Internet browsers (Chrome and Safari), both have the same issue.
I tried to put my MAC on a different ADSL box (I have 2 acccesses with 2 providers at home) and get the same issue.
I also noticed a havy CPU load on the mDNSResponder process (at least 30%). I have restarted it, but no improvement.
Last, I have repared the permissions.
From those trials, it seems that the problem is on the Mac side. But I am completelly without any new idea, so I need help
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Windows 8.1 Upgrade and no WiFi no Ethernet

Hi there,
Im praying that somebody could help me with my problem.
ive upgraded from windows 8 to 8.1 and since then my wifi connection breakes every now and then and my ethernet adaptor doesnt work anymore. according to my research thats a common problem. i tried all solutions i found but nothing works.
my device manager says that both (wifi and ethernet) drivers are up to date and ready to use but the wifi breaks down and needs a reset. the ethernet adptor doesnt work either. lan cable (brand new and tested) is not recognized.
id be so thankful, if somebody could help me.
my laptop is a 3000 N200 (0769), windows 8.1 32bit
wifi adaptor intel wifi link 4965agn
driver version 13.3.0.137
ethernet broadcom netlink (TM)
driver version 15.6.13
thanks so much
manu

Hi Manu,
Welcome to Lenovo Community!
I’m sorry to hear that the LAN and Wireless is not working as expected after updating to Windows 8.1, normally to avoid compatibility issue all the drivers should be updated when the computer is in Windows 8. Hence, I suggest you to perform “System Restore” and the follow the update procedure. Below is the link to perform “System Restore” then a link with exact Windows 8.1 upgrade procedure.
System Restore for Windows 8
Windows 8.1 - Update consideration & Resources
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Can't use private wifi or ethernet but Wifi with F...

Hi
We've had a Homehub3 for two years now with no problems. Last week there was a day's electricity power down locally for maintenance and when the power came back on the internet connection was broken. No wifi or ethernet worked but I could connect fine through all our devices via wifi with FON.
As background at home we have iphones, ipads, macbook and pc laptops connected to the wifi as well as PVR, Xbox and powerline routers plugged in to the ethernet, plus an ethernet cable to connect to laptops where required (for scenarios like this).
BT spent an hour and a half with me trying to resolve this before sending me a replacement Homehub 3. We received this yesterday, plugged it in and connected the various wifi devices. The situation is almost the same except one ipad does connect directly through the private wifi network (the other doesn't), and one iphone also does (again, the other doesn't). Nothing works through ethernet, but again, everything works via wifi with FON.
Obviously we've done lots of rebooting and resetting of hubs and equipment (with delay time before turning back on) but to no avail.
Any suggestions would be widely appreciated but please be aware I'm not particularly technical and a bit of a numpty so basic guidance would be a big help.
Thanks
Jules
Solved!
Go to Solution.

Thanks for the response.
I did the pin in the back/factory reset four times with no joy on the previous hub and deleted all connections. I can give it a try with the new hub that has arrived to see if that makes a difference but as it's a totally different and new hub I don't think that will make a difference as all of the connections were new anyway.
Ethernet made no difference in the past after this. I can try a different cable but the other ethernet cables that connect the Xbox and PVR aren't working either so I don't think the issue is isolated to the cable.
I haven't reset the powerline hubs so can look into that.
I'll try all of the suggestions after work later and post back but as they're all things I've tried and we've got a brand new hub I'm not confident it will make a difference so any alternative suggestions I can try are also very welcome.
Thanks
Jules

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

MB Air cannot see TC 1T '09 while connected via WiFi and Ethernet.

I have a TC 1T 2009 7.4.1 that I have set up successfully with MB Pro and MB White. However I cannot set it up with MB Air v.1 which is connected to TC via WiFi AND Ethernet cable. Internet is fine (Safari) but no TM - when I run APU 5.4.1 it cannot discover the TC it is connected to.
I tried connecting after hard-reset (poke/power on), it would see the TM but then hang forever reading the configuration. So I set it up with MB Pro and MB White and both are now working fine with TC/TM. Then I tried MB Air and it failed.
The TC is connected via ethernet to Sagem router (bridged mode) which supplies WAN and DHCP, it has its own WiFi as well.

And by the way, Hi Everyone, how rude of me not to greet you in the post.
Thanks for any help!

Ethernet driver for HP p7-1414

I need the Ethernet driver for my pc for Win 7. I have found all drivers including the WiFi driver so I can connect to Internet. But when I plug in my student cable, it doesn't do anything. My pc still remains connect wirelessly. So I need that driver. It a HP p7-1414. Thanks.

Hi:
Rather than hunting down all of the drivers individually, the easiest thing would have been to find a model with the same motherboard as yours which has Windows 7 drivers.
All of the W7 drivers from this slightly older model will work on yours.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=5231479&task=

Using Premiere Pro CS6 on an ethernet based SAN like Avid ISIS 5000

Hey all,
My post production facility currently runs both Avid Media Composer 6.5 and Adobe Premiere Pro CS6. We just recenetly started working on the Avid ISIS 5000 for our Avid editing projects. I know that Adobe Premiere Pro CS6 (according to Avid's website) is approved to work together.
I'm wondering on the Adobe Premiere side...are their general settings and practices we need to adhere to, when working with shared storage systems that are ethernet based? I'm running into some performance issues. Like long indexing and conforming when opening up a project on another station? And sometimes not being able to playback media or see media. When working locally, this doesn't seem to happen. I do not run into this when working in Avid Media Composer, so I dont' think it's any issues on my connectivity.
Has anyone had any experience running Premiere on an ISIS 5000 or other ethernet based SAN solution? Where can I find info on how to setup my scratch disks, projects, settings etc, for optimized use in a shared storage environment?

Premiere through version CS6 (or Cloud?) doesn't work properly, if at all, over a network
-see messages #1 and #3 in http://forums.adobe.com/thread/771151
-you MUST give all users administrator accounts to use Premiere
-and especially Encore dual layer http://forums.adobe.com/thread/969395
-#5 Server 2008 is UNsupported http://forums.adobe.com/thread/851602
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977
A solution for networks
Adobe Anywhere http://www.adobe.com/products/adobeanywhere.html

Can an Airport become an Ethernet Jack for a VOIP phone?

I have an Airport Extreme broadcasting wifi already and need a remote ethernet jack for a voip phone in a place where there is no hard wired jack. Can the jack on the Express become a remoted jack?

Can the jack on the Express become a remoted jack?
Yes, assuming that the AirPort Express is located where it can receive a strong wireless signal from the AirPort Extreme.
If you need more wireless coverage in the area where the AirPort Express will be located, you can configure it to "extend a wireless network". The Ethernet port is also enabled in this setup.
Important....your AirPort Extreme must be the newer "n" version to allow this. The "n" version of the Extreme is square with rounded corners. The "old" version of the AirPort Extreme is shaped like a round dome.
If you do not need more wireless coverage in the are where the AirPort Express will reside, you can configure it to "join a wireless network" and then select the option to enable the Ethernet port. The "join" setup will work with either the "new" or "old" versions of the AirPort Extreme.

Windows 10 no internet via wifi nor ethernet

My Elitebook 755 G2 is a great computer i never had a problem since now, i wanted to upgrade to windows 10, the process is simple, i did it well 4 times, why 4 times?, simple the first time i discover that the computer had no internet access via wifi nor ethernet, then i do a recovery to windows 8.1 to read about the issue, i reupgraded the computer and do troubleshooting of the issue with 4 different solutions but nothing happened, then i returned to windows 8.1 again, i read more about the drivers, so i used the HP Support Assistant and check that there was a bluetooth, wifi and Bios update, i do it and returned to windows 10 and the same issue again, i deleted the driver completely and reinstalled and the network does not work neather, so please, you can help me to figure out what is the real issue here, seems to be more than the driver, on windows 8.1 the drivers works perfectly, the wifi and ethernet models are: Broadcom BCM943228HMB 802.11abgn 2x2 Wi-Fi AdapterRealtek PCIe GBE Family Controller

Ndmt05,
For most devices, using the latest Windows 8.1 drivers seems to work.
However, after taking a look at your laptop on the Acer website, it appears that there aren’t any Windows 8.1 drivers available.
One option may be to use the available Windows 7 driver and install it though compatibility mode.
There’s no guarantee that it will work but it’s worth a try.
Keep in mind you’ll want to use the appropriate 32 or 64 bit driver.
Hope this helps!
Mike
Windows Outreach Team – IT Pro
Windows for IT Pros on TechNet

Sync Two iPads With No Wifi or Ethernet?

I have to sync two iPads in a room with no wifi or ethernet connection. Can it be done? (Or an iPad and an iPod?)
A friend told me I can do it with an AirPort base station, and he said I wouldn't need an Internet signal.
Maybe this is a question for an AirPort forum.
What I am wanting to do can be described in the first minute or so of this video: http://www.sunshinevalleysystems.com/PrompterPal_Video_iOSRemote.html
Thanks!

Is this a copy of XP that came with his computer? If so, that would be your problem. You need a retail copy to get the full benefits of Windows. OEM discs are designed to only work correctly with the computer they shipped with.

WiFi Webcam (ethernet based) for my G4?

Similar Messages

Maybe you are looking for