Wifi works but Airport Utility cannot find Time Capsule Device

I just upgraded my home network to a MacBook Air, with Lion OS, plus a 2TB Time Capsule running the wireless. I have my DSL modem connected directly to my Time Capsule. I also have a USB printer attached to the time capsule. When first configuring everything all systems were a go. Using the Airport utility in my Mac I was easily able to find and configure my Time Capsule. I was also able to print wirelessly from my Mac to the USB printer. All working as advertised.
However, after letting my computer go into sleep mode or sit for an extended period (more than an hour) the whole system blows up. I am still able to access the interent through the wifi, however the Airport utility in my Mac no longer can see the Time Capsule, and my wireless printer says it is no longer connected. The only way I have found to rectify the situation is to reboot the entire system (Mac, Time Capsule and Printer). This is effective in returning the system back to normal, however this is not what I had in mind for my new Mac based wireless system.

Similar Messages

Airport Utility cannot find Time Capsule and has a blinking amber light

I have a wireless router for my Wifi set up through AT&T (2WIRE). I am trying to add my TC to my existing network rather than establishing a new Wifi network with it. When I try to plug in my TC to set it up, Airport Utility cannot even find it. My TC has a blinking amber light also. I have tried reseting my TC, resetting my router, unplugging my router, unplugging my TC... I have the latest version of Air Port utility (6.2 (620.33)).

Connect the TC LAN port to the computer by ethernet.
If necessary do a reset of the TC so it shows up.
Put the TC into bridge mode.
Go to the wireless page, and set wireless to off.
Update the TC.. disconnect from the PC and plug WAN port to LAN port of the 2wire with ethernet.
The TC will now exist as a client in your network without creating a second wireless network.
You should also be able to access the TC via the airport utility.
I do think you should use the TC wireless since the 2wire does not provide a signal at 5ghz which is much faster than 2.4ghz.
So I do suggest you in fact do use the wireless but it is up to you.
It makes no difference having two wireless networks if they both connect back to the same router.
Do not use the "Join a wireless network" method.. ie no cable between the TC and 2wire.. that is poorest possible setup.

Airport utility cannot find time capsule

Hi
I had set up time capsule to work with airport facility ...it was working and then I tried to set it up for a printer ...now it it wont find timecapsule.... The airport facility will not let me in to try to make changes....
I am running on Lion and have done all the latest updates
Thanks

Do the setup in isolation..
Plug the TC directly into the Mac..
Turn off any airport connection so you only have the TC plugged in ethernet to LAN port <->
If the airport utility still cannot find the TC.. reset it to factory.
Then set the TC into bridge and do the wireless setup..
update the TC then plug it back into the router..
All setups should be done by ethernet all the time.

Airport Utility cannot find time capsule after new network

I created a new wireless network from my wireless router and then my time capsule started blinking yellow and airport utility can no longer find it. What can I do to fix this?

patr18 wrote:
I created a new wireless network from my wireless router and then my time capsule started blinking yellow and airport utility can no longer find it. What can I do to fix this?
If you can connect temporarily to your Time Capsule with an Ethernet cable, AirPort Utility can probably see it and explain the problem.

Airport utility cannot find time capsule unless I reboot each time I need to back up. Use snow leopard

Why do I have to reboot the time capsule every time that time machine calls for a back-up?

Constant amber LED is nothing to do with network.. it actually is showing the TC is actually got a bad power supply or the disk is dead.
Power it off.. and do a full factory reset.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Then you can see if it boots beyond the solid amber.. if not let it cool right down for several hours and try again.
What model exactly is it??

AirPort utility cant find Time Capsule

I have trouble connecting to my TC. I've got the newest version of airport utility. I've connected the ethernet cable to the Wan port and plugged in the TC. The strange thing is that I'm now connected to internet but the AirPort utility cant find the Time Capsule (and the light flashes amber).

Thank you, that solved this problem for me:
Problem:
I factory reset two 3T time capsules. Now airport utility can't fid them. "No configured AirPort base stations have been found." I've performed all of the following:
Power cycled the time capsules
Restarted the Mac Mini they are attached too
Reperformed the factory reset
Configured the IPv6 in the network settings to "Link-local only"
Designated a router address manually for the ethernet port these time capsules are connected to.
FYI: I have two 3T time capsules daisy chained to a mac mini server on a company LAN. Connected by a USB-ethernet connection.
Solution:
Tuned MacMini Server's WiFi "ON"
Verified network setting IPv6 was set to "Link-Local only"
Disadvantage:
I had the MacMini Server set up as a wifi hot spot so guests could use the internet through it and access our shared server to move files. We no longer have that ability since the MacMini now has to be logged into the company wireless.

Airport Utility cannot find Apple Wireless Devices, yet I'm online!

I'm trying to enter in my SSID number for my kid's Wii to get it online, and I've tried to run through their tutorial. It tells me to go to Airport Utility and find my base station. Here's the deal, it says it cannot find my wireless device. And yet here I sit, complaining about it online.
How can I be online yet the computer not recognize it?

I finally just hooked up an ethernet connection and it works fine. I think the problem all along was the airport card in my iMac. I currently have my question about my airport card as a reply to another post from someone having a similar issue.

Airport Utility cannot find Apple Wireless Devices.

I have had my 1 TB TC for 8 months with an older AX upstairs for the Internet. I have been having many error messages come up about the WDS, but then it would fix it automatically. Then I noticed that it had not had a successful backup since 10/20. I went to go look at the settings and it has not been the same since. The Airport Utility can no longer find the TC or the AX. I have tried every kind of resetting technique I have read online. I have cleared caches and rebuilt all sorts of stuff. I have downloaded several softwares to verify items and clean house. Nothing! I even went to the Apple Store today and purchased a new AX. It found it a few times but it never stuck. The only time it can find the TC is when I plug it directly into the computer. Is it possible the wireless portion of the TC has gone bad or could my iMac wireless have gone out? The lights on both the TC and AX just keep blinking. I have been struggling with this for 7 days now when I come how from work. On the rare occasion it would actual find it it would never make it through the set up process. It either couldn’t join the network or it never restarted after clicking update. Thanks.

I finally just hooked up an ethernet connection and it works fine. I think the problem all along was the airport card in my iMac. I currently have my question about my airport card as a reply to another post from someone having a similar issue.

Parallels Win7 - Airport Utility cannot see Time Capsule

Running Win7 as virtual machine on Mac using Parallels 5.0. Mac can see fully functioning time capsule but when I switch to Win7 virtual machine, airport utility will briefly see time capsule and then it disappears completely. Same happens with using bonjour printer wizard when the HP Laserjet connected via USB to the time capusle will first appear and then disappear after 5-8 seconds. Searched help forums and have not found a solution, and welcome any help please. Internet access via time capsule on Win7 virtual machine not a problem at all.

Same issue, I found this http://forum.parallels.com/showthread.php?t=21064
Time Capsule is not a complete product.

Airport utility cannot find time machine

Time Machine has orange flashing light and when I try to turn it on in system preferences, the computer scans for airport devices but finds none.

Have you do a reboot of the TC.. that will often fix things.
ie pull out the power cord.. count to 10.. plug in the power cord.. wait a minute for things to boot.
Does it show up now?
Or a full network reboot.. restart in correct order.. modem.. TC.. clients. 2min gap.
No luck then do a full factory reset of the TC.
ie pull out the power cord.
hold in reset button.
plug in the power cord. Do not release reset.
Front LED flashes rapidly after about 10sec. Release reset.
Wait for TC to boot up.
Use ethernet to computer to redo the setup.
Use all SMB names.. ie Short, 10-20 characters fine .. less is great.
No spaces.
Pure alphanumeric.
Nothing on the hard disk will change. But you might need to reset Time Machine and rediscover the backups.
See A4 here. http://pondini.org/TM/Troubleshooting.html

Cannot set up Time Machine because Airport Utility cannot find it. What do I do now?

Sorry, I meant to say Airport Utility cannot find Time Capsule. The TC is not listed as an available drive in the TM setings panel. Trying to set up a MBP. iMac TM settings panel lists TC but if I search for it from either machine, iMac or MBP it is not found. Repeated rescanning doesn't find it. Also trid Airport Utility from iPad and iPhone, still not found. When I first purchased it I set it all up so I have logged into it before. That was a couple of months ago, now I've got around to setting up TM I can't access it. It is continuing to provide my wireless network though.

OK, turned off all devices, pulled the plug out of the TC, waited then plugged back in. Started everything up again and Airport Utility can now find the TC.
Thanks to you both for trying to help. Next time I'll try this first but it didn't seem like a very elegant Apple solution to the problem.

Airport utility cannot find my Airport Express, repeated rescans, nothing, even with direct connect via Ethernet. Help!

I use Airport Express to stream iTunes to my home stereo. This is the ONLY thing I use it for. It quit working and now Airport Utility cannot find the Airport Express unit, even after repeated re-boots of all components, resetting the Airport Express, even when connected directly to my router via Ethernet. I use a D-Link wirless router.
I downloaded the latest Airport Utility, but it will NOT work with XP (from the Apple website, not my words).
The Airport Express will achieve a solid green indicator after reset, but Airport Utility cannot find it. Until Utility can find and recognize the Airport Express hardware, I cannot adjust or reset any settings, etc.
Help!

I downloaded the latest Airport Utility, but it will NOT work with XP (from the Apple website, not my words).
The latest version of AirPort Utility.....5.6.1.....will only run on a Windows 7 machine.
Try AirPort Utility 5.5.3 for Windows (make sure that you have Service Pack 3 installed on your PC, otherwise the application will not run on an XP machine).
The Airport Express will achieve a solid green indicator after reset, but Airport Utility cannot find it.
After a "hard reset" or "factory default reset", the light will not be green.....it will be slowly flashing amber after it restarts. See this Apple support document for more information on various resets:
Resetting an AirPort Base Station or Time Capsule FAQ

Airport utility cannot find base station

Hello. I upgraded to Leopard. I have normal internet access from airport extreme but airport utility cannot find my base station. How can I re-establish contact? Thanks

Which base station do you have?
The "AirPort Utility" is only compatible with the round 802.11b/gAirPort Extreme base station (AEBS), square 802.11b/g/n AEBS, and AirPort Express (AX).
It is not compatible with the older graphite 802.11b AirPort base station (ABS) nor the dual-Ethernet (aka "snow") ABS.
If you have a compatible base station, have you tried doing a reset on the base station and perhaps temporarily connect your computer via Ethernet to the base station?

Airport utility cannot find Extreme nor Express, but internet is working?

I have an airport extreme base station and and airport express (as a wireless extender and media speakers)
When my iMac wakes up from sleep, airport utility cannot find any devices.
- internet works as usual
- airplay doesn't work (via my ipod or my iphone)
- apple TV 2 can't find the itunes library.
- in system preferences -> network - my network seems to be all ok and when I turn off airport and on again, both devices suddenly appear in the airport utility. But when the iMac goes to sleep, same problem happens.
- I have made ensured that my network is the preferred network but still the problem persists.
as the internet is working, there doesn't appear to be a problem. However, when airplay and apple TV are not working properly, this is a problem!
Grateful for any help. Thanks.

My Airport utility cannot find my base station either, and I can't print. But I can access the Internet!
The base station just "vanished" one day after working perfectly for about two months. I first discovered this when I was unable to print - I began troubleshooting by entering the utility, only to discover the base station was not listed.
I finally deleted my networking settings in Vista, and then did a factory reset on the Aiport Extreme. I then set everything up from scratch again to successful resolution.
Then again one day a short time after that, it vanished again! In frustration, I disconnected Airport and put it away. I tried setting up a new Dlink I purchased to replace the Airport, but the Dlink didn't work either!!! Dlink tech support couldn't fix the problem and suggested I get my money back. I then, as a last ditch attempt, reconnected the Airport. It automatically found the base station without me doing anything besides just hooking it back up!
It worked for about two weeks and now it vanished again! The utility upgrade released the other day has not fixed this problem. I guess I'll delete networking connections again in Vista, and do a factory reset to Airport again.
I guess Airport and Vista just don't play well together.

Airport Utility cannot find my Extreme base station but everything works!

I must be going crazty, but I can't figure this one out. I've had my Extreme and Express configured since November of 2007. Airport Utility would always find them and let me look at the configuration. I don't believe that anything major has changed on my laptop. Today I went to run Airport Utility and it cannot find my 2 stations. Again, everything is working, I can surf the net, from various laptops throughout my house.
I had to do a factory reset to the extreme, and thankfully I remembered the 10.0.1.1/public and was able to reload a baseconfig I had. After this I still couldn't find the extreme nor the express with Airport Utility.
Does anyone have any suggestions? Why would Airport Utility stop finding my stations?
Any help would be amazing.
Thanks,
Frank

My Airport utility cannot find my base station either, and I can't print. But I can access the Internet!
The base station just "vanished" one day after working perfectly for about two months. I first discovered this when I was unable to print - I began troubleshooting by entering the utility, only to discover the base station was not listed.
I finally deleted my networking settings in Vista, and then did a factory reset on the Aiport Extreme. I then set everything up from scratch again to successful resolution.
Then again one day a short time after that, it vanished again! In frustration, I disconnected Airport and put it away. I tried setting up a new Dlink I purchased to replace the Airport, but the Dlink didn't work either!!! Dlink tech support couldn't fix the problem and suggested I get my money back. I then, as a last ditch attempt, reconnected the Airport. It automatically found the base station without me doing anything besides just hooking it back up!
It worked for about two weeks and now it vanished again! The utility upgrade released the other day has not fixed this problem. I guess I'll delete networking connections again in Vista, and do a factory reset to Airport again.
I guess Airport and Vista just don't play well together.

Wifi works but Airport Utility cannot find Time Capsule Device

Similar Messages

Maybe you are looking for