WiFi - WPA - 802.1X - Bug?

Hi guys,
sorry for posting this here in the discussion forums, but I don't really know where to do it.
I think, I just found a bug in the OS X Network Preferences. I tried to login into a WPA secured network. Therefore I had to import a private key file and a certificate. After doing that I had to configure a 802.1X profile. So I did.
But by clicking on the "Connect"-Button in the Airport preferences, it tried to access my MobileMe certificate and not that, that I imported before. SO it didn't work.
I had to delete the MobileMe certificates from the KeyChain to make it access the privateKey.
I was about to post it somewhere directly to Apple but couldn't find the link. Maybe you guys could do that for me?
Thank you very much.
Best regards from Viena/Austria
Kamil

http://www.apple.com/feedback/

Similar Messages

N95 Wifi WPA connection problem

I recently bought the Nokia N95 and everything is working except the wifi WPA part. I DL the latest firmware (v20.0.015) but that didn't help.
Everytime i connect with my home wifi lan it asks for a password. It doesn't matter what password i try it says "invalid pre-shared wpa key" So even simple passwords like "12345678" or "merryxmas" don't work. If i change from WPA-PSK to WEP 128 bit WEP key then it works ???
This must be a N95 error ? I also tried tkip and aes but that didn't help. My Phone AP settings r:
Network - public
WPA/WPA-2
Pre-shared key
WPA-2 only - off
Does anybody has a working WPA wifi N95 ???

If I connect to the PC as "Mass Storage" I can see the phone as a removable disk and go into the file structure, just as I could in PC Suite mode. However, if try to drag and drop a file from my N95 to the desktop the phone bleeps intermittently every 2-10 seconds, the USB connection icon on the phone display will blink in time to the phone bleep. The "Copying" bar on the PC shows the file transfer occurring but extremely slowly. E.g. A 4Mb MP4 showed 3 minutes on the progress bar but after 10 minutes was barely a sixth of the way through.
It appears that the connection betweeen the phone and PC is only active when the phone bleeps, in the periods of silence there is seemingly no activity. I think this because if I look at the file structure on the phone, while the trasfer is taking place, the window will freeze until the next bleep of the phone.
Maybe someone can recommend a brand and model USB2.0 PCI card (preferably also with firewire) so that I can buy one that I know works?

Copy and paste WiFi WPA key in Lucid

How can I copy and paste a 63 character WiFi WPA key in the LG Lucid phone? The key is totally random and the chances of typing it correctly are slim at best. The WPA standard allows up to 63 character for a key. I would like to put a file on the SD card via usb and then somehow paste the key into the correct WiFi setup field. Seems to be a pretty basic capability ...
Thanks.

I'm not familiar with Polaris Office, but perhaps it doesn't read .txt files. If it reads .doc files (MS Word documents), you could just put the key into that kind of file and put it on the SD card for Polaris to open.
The trick with copying and pasting on Android phones is, as Tidbits said, to tap and hold the text. That might bring up a menu offering the option to select a word or select all, and then if you choose Select Word a rather goofy and awkward-looking pair of pointers that you drag to move the beginning and end of the selection. Or it might bring up the pair of pointers directly, and tapping on them will give you an option to select word or all. In any case, once you've got the text selected with the pointers, it will then offer options to copy or cut the text. Frankly, with my clumsy fingers it's taken me several months to develop any skill at this at all.
Of course, in this case choosing Select All would be simplest, if all there is in the file is the WPA key.
You may only have to do this once. On my Samsung Stratosphere, once I had logged onto my home WiFi one time the procedure has been automatic ever since, and the connection occurs seamlessly and quickly.
Good luck!

1200 WPA/802.1x problem

Hi, folks,
I am trying 1200 WPA/802.1x(EAP). But now run into issues. It's a little strange. Everything I restarted ACS service, the authentication can pass, but after that when I disable or repair the wireless and try again the authentication fail.
1231G + ACS3.3 + self-signed certificate (I also tried CA server, the same)
Any one has or ever experienced this issue? Thanks.
Ed

Seems to be resolved. I upgraded the AP IOS to the lastest 12.38JA1, then it works. Although each time I can see one fail record in ACS log, but anyway the authentication can be completed after the first failed try.
BTY, I saw these words in cisco.com:
PEAP Authentication with Windows XP SP2 Fails with RADIUS Server
This issue occurs in Windows XP Service Pack 2 when you use a non-Microsoft RADIUS Server like the Cisco RADIUS server for authentiation. Sometimes the initial connection can authenticate successfully, but subsequent fast-connect authentication attempts might not connect successfully. Microsoft has confirmed that this is a problem in the Microsoft products.
This issue occurs if your Cisco RADIUS server uses a different method to calculate the Extensible Authentication Protocol (EAP) Type:Length:Value format (EAP-TLV) ID than the method that Windows XP uses.
In order to resolve this problem immediately, contact Microsoft Product Support Services to obtain the hotfix. You can find more information about this hotfix at Microsoft hotfix for WPA leavingcisco.com.
Interesting, ah?
Ed

Restrict wifi to 802.11b on T400 with windows 7?

Hi Folks, I need to restrict connection of my intel 5300 to 802.11b at work (g is flaky for some reason). On XP, access connections would let me restrict my mode to 802.11b. In my new Windows 7 installation, however, I can't figure out how to make that happen. Is there any way to restrict my wifi to 802.11b in Windows 7? Thanks, a T400, 2764-CTO Intel 5300 AGN Windows 7
Solved!
Go to Solution.

Ashenkin,
Microsoft does have an official Windows 7 Support Forum located here http://tinyurl.com/9fhdl5 . It is supported by product specialists as well as engineers and support teams. You may want to check the threads available there for additional assistance and feedback.
Jessica
Microsoft Windows Client Team

Certificate Not Verified for Wifi WPA Enterprise

Hi all
I have a MDM server to deploy profile to all enrolled devices (iPhone4s, iPad...etc) for wifi setting (WPA2 PEAP SSID: M_WEP_ENT).
But I found one issue, if users have ever connected to M_WEP_ENT and accepted Certificate.
After deploying profile to the users' devices, it shows "Not Verified" in Certificate while these users try to connect the wifi with specified SSID.
And I also install this profile with iPCU, but there is no this problem, iOS just directly to ask users for input user/password again.
The following is my profile plist setting, does any idea for this issue ?
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<array>
    <dict>
        <key>AuthenticationMethod</key>
        <string>directory</string>
        <key>AutoJoin</key>
        <false/>
        <key>EAPClientConfiguration</key>
        <dict>
            <key>AcceptEAPTypes</key>
            <array>
                <integer>25</integer>
                <integer>21</integer>
            </array>
            <key>EAPFASTProvisionPAC</key>
            <false/>
            <key>EAPFASTProvisionPACAnonymously</key>
            <false/>
            <key>EAPFASTUsePAC</key>
            <false/>
            <key>OneTimePassword</key>
            <true/>
            <key>OneTimeUserPassword</key>
            <true/>
            <key>OuterIdentity</key>
            <string></string>
            <key>SystemModeCredentialsSource</key>
            <string>ActiveDirectory</string>
            <key>TLSAllowTrustException</key>
            <true/>
            <key>TTLSInnerAuthentication</key>
            <string>MSCHAPv2</string>
            <key>UserName</key>
            <string></string>
            <key>UserPassword</key>
            <string></string>
        </dict>
        <key>EncryptionType</key>
        <string>WPA</string>
        <key>HIDDEN_NETWORK</key>
        <false/>
        <key>Interface</key>
        <string>BuiltInWireless</string>
        <key>Password</key>
        <string></string>
        <key>PayloadDescription</key>
        <string></string>
        <key>PayloadDisplayName</key>
        <string>WiFi (M_WPA_ENT)</string>
        <key>PayloadEnabled</key>
        <true/>
        <key>PayloadIdentifier</key>
        <string>com.test.wifi.config</string>
        <key>PayloadOrganization</key>
        <string>test</string>
        <key>PayloadType</key>
        <string>com.apple.wifi.managed</string>
        <key>PayloadUUID</key>
        <string>c20997cf-e696-4d48-b685-c88c3633d4a2</string>
        <key>PayloadVersion</key>
        <integer>1</integer>
        <key>ProxyType</key>
        <string>None</string>
        <key>SSID_STR</key>
        <string>M_WPA_ENT</string>
        <key>SetupModes</key>
        <array>
            <string>System</string>
        </array>
    </dict>
</array>
</plist>
The following is the error log from iPCU console while users to click "Accept" "Not Verified" Certificate:
Jul 10 11:53:06 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Jul 10 11:53:06 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Attempting to perform MDM request: DeviceInformation
Jul 10 11:53:06 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Command Status: Acknowledged
Jul 10 11:53:06 Miller-iPhone4s Preferences[5566] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Jul 10 11:53:06 Miller-iPhone4s Preferences[5566] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x160200:<VPNBundleController: 0x160200>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Jul 10 11:53:07 Miller-iPhone4s eapolclient[5579] <Notice>: en0 START
Jul 10 11:53:07 Miller-iPhone4s wifid[547] <Error>: WiFi:[363585187.064848]: Processing link event DOWN
Jul 10 11:53:07 Miller-iPhone4s wifid[547] <Error>: WiFi:[363585187.224358]: Processing link event UP
Jul 10 11:53:07 Miller-iPhone4s configd[14] <Notice>: LINKLOCAL en0: parent has no IP
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLANCore::setDISASSOCIATE() [wifid]:
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLAN Left BSS:       @ 0xc0cbc200, BSSID = 00:21:e9:b8:67:b2, rssi = -61, rate = 54 (100%), channel = 10, encryption = 0x8, ap = 1, failures =   0, age = 0, ssid[13] = "HMDM QA Apple"
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_8021X, key = CIPHER_NONE    , 802.1X .
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: [177104.488024000]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLAN Joined BSS:     @ 0xc0ff4600, BSSID = 1c:aa:07:17:d3:a0, rssi = -63, rate = 54 (100%), channel = 11, encryption = 0xc, ap = 1, failures =   0, age = 11, ssid[ 6] = "M_WPA_ENT"
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AirPort: Link Up on en0
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: en0: BSSID changed to 1c:aa:07:17:d3:a0
Jul 10 11:53:07 Miller-iPhone4s configd[14] <Notice>: network configuration changed.
Jul 10 11:53:07 Miller-iPhone4s UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 0
Jul 10 11:53:07 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Network reachability has changed.
Jul 10 11:53:07 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Network reachability has changed.
Jul 10 11:53:07 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Scheduling poll of MDM server.
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:]: User Information required
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Warning>: -[<CALayer: 0xd5ecaf0> display]: Ignoring bogus layer size (320.000000, 34359738368.000000)
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetPatternPhase: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextGetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextFillRects: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetPatternPhase: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextGetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextFillRects: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextAddPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: clip: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextGetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextFillRects: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineWidth: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineJoin: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineCap: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetMiterLimit: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFlatness: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextAddPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextDrawPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineWidth: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineJoin: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineCap: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetMiterLimit: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFlatness: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextAddPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextDrawPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:08 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLANCore:startRoamScan(): 2949 Delaying RoamScan; because Join Mgr Busy 0 isWaitingforIP 1

this TOTALLY fixed the problem for me
(which started i believe when i deleted the cache, cookies and security settings stuff in camino, sometimes apparently the certificates don't like, preserve themselves or something...):
http://support.rhombic.net/knowledge-base/articles/no-root-certificate-with-mail -app
follow the download links...
and also
https://knowledge.verisign.com/support/ssl-certificates-support/index?page=conte nt&id=SO4785&actp=LIST
(follow the first instruction under the resolution heading)
I don't know actually if this last link above is helpful but i did it anyways. If you find out, let me know!
once these have been downloaded to your desktop, double-clicking them automatically opens keychain. Be sure to put them into your X509 Anchors...
It hasn't resolved everything, but the major websites, its made EVERYTHING a lot easier. and no, i don't want to Archive and Install.

N80 WiFi-WPA and drop calls when close the keypad

My phone detail: Nokia N80(42.02)
V.3.0614.0.3
11-04-2006
RM-92
Although it seems my phone works quite prefectly, some problems has arised especially closing the keypad when u on the phone would result dropping the call.
I am not sure whentever this is in propose or is just a bug.
Anyway, It is quite annoying to me.
Second issues is to access a secure WiFi is quite troublesome. Connecting to the AP is always freeze the whole handset. And up to now, i haven't succedded even a single time to connect to that secure WiFi Network.
The secure wifi network is cisco based using WPA
(WEP-PEAP[EAP-MSCHAPv2])
The Setting is rite for sure(ENABLE protcol only used). And it happens to be the action would freeze the handset.
I have asked the I.T. team for help...however the I.T. team didn't know what to do.
Can anybody tell me where the problem was?
or am i need to wait a new firmware to come....>_

Hello!
I suggest to try use your access points with infrastructer mode and without hidden SSID first.
It has to help you.
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

WIFI WPA-EAP won't connect as EAP method only shows SIM, how can I make it show more?

Trying to connect to a wifi connection which uses WPA-EAP security, with a username and password system (at work and I cannot change these settings).
My Android device connects with no issues, but my ZTE open C on Firefox OS will not...
Looking into my Android settings it is using EAP method PEAP; but the FFOS will only let me use SIM.
What is the workaround for this?
How can I connect my device to my work's wifi?

GAUTAM24, if you read the earlier reply you would see a relevant bug has already been filed.

Wifi WPA Enterprise

Hello,
My institution uses a very strict (apparently) WPA2 enterprise encryption. For wifi to work on my mac, I need to enter the 802.1x details manually from the network pref panel.
I need to enter TTLS authentification only (and leave PEAP, TLS, etc all disabled) and withint TTLS I need to specify PAP inner authentification.
If I do this, wifi works. If I leave the default settings (TTLS, PEAP, TLS enabled and TTLS with MSCHAPv2 as inner authentification) it doesn't work, and I obtain a "wrong username or password".
Now, with the iPhone I cannot specify any of these settings. I can only enter username and password for either WPA or WPA2 enterprise, and I keep on getting "incorrect user and password".
Is there any way I can configure my iphone correctly?
thanks.
Pd. No.. there's no way I can get IT to modify the network configuration. It's a pretty big government institution that spans all over Spain

I believe that you need to use the iPhone Configuration utility. The Enterprise Deployment guide:
http://manuals.info.apple.com/enUS/Enterprise_DeploymentGuide.pdf
gives details on what parameters can be set.
DISCLAIMER: I have never used the utility and can offer no help on how to use it!

Iphone 4 (White MC604FB) Update iOs 6.0 - Wifi Problem and iphone bug when trying to unlock on call receive. Is this a known bug ?

Dear Members (and Apple Team)
I have two iphones 4 and two bugs on the white one
1/ Is the first gen (Black)
2/ Is the second gen (White MC604FB)
I both uptdated the into Update iOs 6.0 -
Bug 1 : With the white iPhone 4 i have a real Wifi Problem, as close as 5 to 7 meters from any WiFi spot, i lose the signal, where my "black" iphone at the same time and same distance shows full signal (and tested with safari.... works).
Bug 2 : Once the white iphone is in "stand by" when trying to unlock on incoming call, the touch screen works and receive the touch information, but it bugs on trying to unlock to receive the call. (very very anoying :o) have to call back almost every time.
Are those already known bugs ? Is there a fix ?
Reagrds
Alexandre

Dear Diesel
Thanks for your prompt reply.
I did restore before posting, in evry possible way. no improvment.
I have 24H ago updated to iOS 6.01. So far no more "screen jam" on incoming calls, but the wifi is still inconsistent with very poor signal strenght (compare to my black iphone 4)
PS : For information, did beleive there was two versions of iphone 4 (In Europe ) :
1/ Is firts generation "gen" with With board MC603FB
2/ The white one for me with board MC604FB

Could not access wifi (wpa,wpa2)

hi, all
im developing an access point(ap), but i have critical problem...
in auth mode WPA(personal, enterprise mode, and aes, tkip, tkip-aes), WPA2(personal, enterprise mode, and aes, tkip, tkip-aes), any devices can connect to my ap except for iphone
i could not understand why only iphone disassociated my ap
belows are logs...
Apr 5 10:05:05 jingyun-ui-iPhone kernel[0] <Debug>: 500368.098888 wlan.N[10295] AppleBCMWLAN Joined BSS:     @ 0x812f4200, BSSID = 00:90:a3:47:4f:c1, rssi = -45, rate = 54 (100%), channel = 4, encryption = 0x8, ap = 1, failures =   0, age = 42, ssid[ 6] = "cc3900"
Apr 5 10:05:05 jingyun-ui-iPhone kernel[0] <Debug>: AirPort: Link Up on en0
Apr 5 10:05:05 jingyun-ui-iPhone kernel[0] <Debug>: en0::startOutputQueues (0)
Apr 5 10:05:05 jingyun-ui-iPhone kernel[0] <Debug>: IO80211PeerManager::doEnable
Apr 5 10:05:05 jingyun-ui-iPhone kernel[0] <Debug>: en0: BSSID changed to 00:90:a3:47:4f:c1
Apr 5 10:05:05 jingyun-ui-iPhone kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Apr 5 10:05:05 jingyun-ui-iPhone kernel[0] <Debug>: en0: BSSID changed to 00:90:a3:47:4f:c1
Apr 5 10:05:05 jingyun-ui-iPhone kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Apr 5 10:05:05 jingyun-ui-iPhone kernel[0] <Debug>: IO80211Peer::queuePacket ff:ff:ff:ff:ff:ff alllocate queue for ac 0
Apr 5 10:05:05 jingyun-ui-iPhone configd[48] <Notice>: network changed: v4(pdp_ip0:163.222.71.173, en0-:192.168.0.66) DNS! Proxy-
Apr 5 10:05:05 jingyun-ui-iPhone configd[48] <Notice>: Captive: CNPluginHandler en0: Inactive
Apr 5 10:05:05 jingyun-ui-iPhone configd[48] <Notice>: network changed: v4(pdp_ip0:163.222.71.173) DNS Proxy
Apr 5 10:05:05 jingyun-ui-iPhone mDNSResponder[31] <Error>: DeregisterInterface: Frequent transitions for interface en0 (192.168.0.66)
Apr 5 10:05:05 jingyun-ui-iPhone mDNSResponder[31] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:3ED0:F8FF:FE24:E898)
Apr 5 10:05:05 jingyun-ui-iPhone kernel[0] <Debug>: 500368.199680 wlan.N[10296] AppleBCMWLANCore:startRoamScan(): 3365 Delaying RoamScan; because Join Mgr Busy 1 isWaitingforIP 1
Apr 5 10:05:08 jingyun-ui-iPhone Preferences[12524] <Warning>: -[APOtherNetworkController keyboardWillShow:]
Apr 5 10:05:08 jingyun-ui-iPhone kernel[0] <Debug>: 500371.085227 wlan.N[10297] AppleBCMWLANNetManager::handleDisassoc(): status = 0, reason = 15, flags = 0x0, authtype = 0, addr = 00:90:a3:47:4f:c1
Apr 5 10:05:08 jingyun-ui-iPhone kernel[0] <Debug>: 500371.089803 wlan.N[10298] AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Apr 5 10:05:08 jingyun-ui-iPhone kernel[0] <Debug>: 500371.089933 wlan.N[10299] AppleBCMWLAN Left BSS:       @ 0x812f4200, BSSID = 00:90:a3:47:4f:c1, rssi = -45, rate = 54 (100%), channel = 4, encryption = 0x8, ap = 1, failures =   0, age = 45, ssid[ 6] = "cc3900"
Apr 5 10:05:08 jingyun-ui-iPhone kernel[0] <Debug>: 500371.090008 wlan.A[10300] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Apr 5 10:05:08 jingyun-ui-iPhone kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Apr 5 10:05:08 jingyun-ui-iPhone kernel[0] <Debug>: en0::stopOutputQueues
Apr5 10:05:08 jingyun-ui-iPhone kernel[0] <Debug>: IO80211PeerManager::doDisable
Apr 5 10:05:08 jingyun-ui-iPhone kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Apr 5 10:05:08 jingyun-ui-iPhone Preferences[12524] <Warning>: WiFi: Joined (null)
Apr 5 10:05:09 jingyun-ui-iPhone Preferences[12524] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Apr 5 10:05:09 jingyun-ui-iPhone Preferences[12524] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x1ed9d110:<VPNBundleController: 0x1ed9d110>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: 500372.046796 wlan.N[10301] AppleBCMWLANCore::setASSOCIATE(): [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_PSK, key = CIPHER_PMK , don't disassociate    .
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: 500372.130819 wlan.A[10302] AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: 500372.130940 wlan.N[10303] AppleBCMWLAN Joined BSS:     @ 0x81459000, BSSID = 00:08:9f:d2:f4:a0, rssi = -73, rate = 54 (100%), channel = 9, encryption = 0xc, ap = 1, failures =   0, age = 0, ssid[ 6] = "iptime"
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: AirPort: Link Up on en0
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: en0::startOutputQueues (0)
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: IO80211PeerManager::doEnable
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: en0: BSSID changed to 00:08:9f:d2:f4:a0
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: en0: BSSID changed to 00:08:9f:d2:f4:a0
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Apr 5 10:05:09 jingyun-ui-iPhone kernel[0] <Debug>: IO80211Peer::queuePacket ff:ff:ff:ff:ff:ff alllocate queue for ac 0
Apr 5 10:05:10 jingyun-ui-iPhone kernel[0] <Debug>: 500372.210844 wlan.N[10304] AppleBCMWLANCore:startRoamScan(): 3365 Delaying RoamScan; because Join Mgr Busy 1 isWaitingforIP 1
Apr 5 10:05:10 jingyun-ui-iPhone kernel[0] <Debug>: 500372.376670 wlan.N[10305] AppleBCMWLANJoinManager::handleSupplicantEvent(): status = 6, reason = 0, flags = 0x0, authtype = 0, addr = 00:00:2c:f4:02:00
Apr 5 10:05:10 jingyun-ui-iPhone profiled[12552] <Notice>: (Note ) profiled: Service starting...
so my question is that what means for reason=15 (wlan.N[10297] AppleBCMWLANNetManager::handleDisassoc(): status = 0, reason = 15, flags = 0x0, authtype = 0, addr = 00:90:a3:47:4f:c1)
, and why handleDisassoc function is called with reason=15?
android, windows could connect my ap, so i think there is no problem with wpa,wpa2 authentication packets.
are there ideas?
ps1. what is the best way to debug this problem for windows?
ps2. please save me. this problem makes my lifespan decrease.

    Mifrett, don't panic. I'm here to assist you. It sounds like the software update may be conflicting with the software of the applications that were previously downloaded to your device. I recommend that you uninstall a few applications in Settings>Manage Apps> tap the app>tap uninstall application. Once you have uninstalled a few applications, power your device off/on. You may redownload the applications that you previously had. However, this time, the applications will be downloaded to your phone with the latest app software. I trust that these steps will improve the performance of your device. Keep us posted. We're here for you.
LasinaH_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Wifi (WPA-PSK) not restored after sleep? (10.4.10)

Hi,
Has anyone else noticed that their Wifi connection is not being restored after the MacBook comes back from a sleep?
I'm using a 2006 white MacBook (Core Duo) with 10.4.10, connecting to a Cisco 877W ADSL router using WPA-PSK. Cisco firmware version is (C870-ADVSECURITYK9-M), Version 12.4(4)T7, RELEASE SOFTWARE (fc1), "flash:c870-advsecurityk9-mz.124-4.T7.bin" which seems to be current.
From a cold boot, there is no problem connecting to the wireless router, but after a sleep, the connection is not restored, and the router syslog shows repeated unsuccessful authentication attempts from the Macbook's MAC address.
Connecting manually to the correct network SSID doesn't resolve the problem: it just prompts for the WPA PSK keyphrase, which doesn't work if entered. Of course the correct keyphrase is already in the keychain.
As a workaround, switching the Macbook's Airport off and on again a few times eventually seems to get it working again, but it's slow and very clunky.
Can anyone else confirm this problem? It seems to have been introduced with 10.4.10, but I would like independent confirmation before reporting this to Apple, as I changed the wireless router around the same time as the 10.4.10 update appeared.
Thanks,
- Martin.
PS: I guess there are two morals to this story...
1) Always clone your hard drive to a Lacie drive with SuperDuper before installing any Apple updates - so that you can back out any buggy updates without a full reinstall.
2) Don't install any Apple updates within 2 weeks of installing other network changes - so that you can tell what's caused any issues.

The WPA auth problem still exists on a clean install of Leopard (and a full reboot is needed to clear it every time the laptop comes out of sleep) so I'll ring Apple Support and see if they can at least add it to their known issues list, in the hope of resolution later. It's quite likely that downgrading to WEP would be a workaround, but WEP is just not acceptable from a security perspective.

802.1x Bug in Switch IOS ??

Seems to me IOS does not work as documentation states when handling dot1x authentication. I believe the latest 12.2 IOS should not reauthenticate a client if the MAC address has not changed (with dot1x reauth disabled of course). However I have tested this and it seems the switch always sends EAPOL even if I use same PC on the same port. Is this a bug?

There's nothing that can be done about this. I'm not even sure what "MAC history" means, but if the port goes down, it's cleared anyway.
Now, I may have a workaround for you here. MAC-Auth-Bypass (MAB). MAB authenticates machines that cannot speak 1X be their MAC address. If it fails and you also have the Guest-VLAN turned on, the port will go into the Guest-VLAN anyway (to support backward compatibility). From a processing perspective, MAB is attempted after 1X, but before the Guest-VLAN (which just authorizes a port blindly).
What this means for your scenario here is that if you enable MAB, you can put a machine to sleep which will bounce the port). 802.1X will time out (since your machine is asleep). Then, MAB will kick in and initiate. However, it will be hung there until the device sends traffic, and if it's asleep it won't be sending any. This way, the port doesn't go into the Guest-VLAN when going to sleep, and you can wake the machine up from whatever VLAN is configured natively on the port.
Hope this helps,

Wifi / WPA Security Issue- Need Help- Any solutions??

I've searched everywhere for a solution to this problem- it seems widespread, many people have had the same, but has anyone solved it? Desperately looking for a solution!!
Problem: I'm on OSX 10.4.11. Connecting to my wifi router via Airport from my Mac Pro. When any type of security is enabled at the router (WPA, WPA2, WEP, etc.), my internet connection gets dropped after a few minutes. This happens for other Apple devices on the network, like my iBook (also on OSX 10.4.11). Even my iPhone. Only short term solution is turning Airport off and on again. But the problem recurs after a few minutes.
With security turned off at the router, all is well. (But then I'm on an unsecured network.)
At first I thought it was the router, but the problem persisted with a new router.
Any help appreciated... this is very annoying yet I haven't found any solution anywhere...

Neither. The first was a D-Link and the current is a Tenda.

EA2700 smart wifi keeps broadcasting SSID bug even if wireless disabled

Ver.1.1.39.145204 is the firmware.
Shutting off the 2.4 Ghz and the 5 Ghz wifi does not shut off the transmission of an SSID.
If allow wireless admin access is checked the SSID continues to transmit on both 2.4 Ghz and 5Ghz bands.
If unchecked then the SSID transmits only on the 5Ghz band.
In both cases the SSID being transmitted is the factory default SSID and it advertises an unsecured connection. (router wipes out your security settings when you disable a radio)
On the plus side attempts to connect to this erroneously broadcast ssid have been unsuccessful but it still seems like a bad idea to be advertising an open connection 24 hours a day.
I have tried to report this to Linksys tech support. Their answer was to reload the firmware. Which I did - however it did not change the behavour of this SSID bug. I asked them to report it as a bug and the lady declined.
Does anyone know how to shut of the SSID when the Wifi is disabled?
Solved!
Go to Solution.

Hi eastavin. Did you delete some preferred networks on your computer when you disable both 2.4 GHz and 5 GHz network? You need to do this before connecting your computer wirelessly again, so that you would be able to know if your computer can still see and connect to your disabled network. Also, what is the OS of your computer? Is it a Windows computer or a Mac?

WiFi - WPA - 802.1X - Bug?

Similar Messages

Maybe you are looking for