WIFI WPA-EAP won't connect as EAP method only shows SIM, how can I make it show more?
Trying to connect to a wifi connection which uses WPA-EAP security, with a username and password system (at work and I cannot change these settings).
My Android device connects with no issues, but my ZTE open C on Firefox OS will not...
Looking into my Android settings it is using EAP method PEAP; but the FFOS will only let me use SIM.
What is the workaround for this?
How can I connect my device to my work's wifi?
GAUTAM24, if you read the earlier reply you would see a relevant bug has already been filed.
Similar Messages
-
My iPhone won't connect with my computer or charge. How can I fix this?
My iPhone won't connect with my computer. It also will not charge. I changed the white charging cord, but I have the same problem. I connected other devices to the USB and they work. It's strictly the iPhone.
How can I correct this?I forgot to mention, the iPhone does charge via wall plug.
-
My iPod Classic 160 is in disc mode. I responds to nothing. iTunes doesn't recognize it. It doesn't sync. I've tried to restore and got error 1429. Now it just stays in disc mode and won't turn off. I'm keeping it connected to the charger so it doesn't go dead. Is there anything I can do to resurrect my pod?
To get out of disk mode do a iPod Hard Reset.
Toggle the Hold switch till you dont see the red mark.
Press Menu and Center buttons simultaneously for about 10 secs till the Apple logo comes ON then release the buttons
Select your preferred language.
See this Apple support Article on the 5Rs.
http://www.apple.com/support/ipod/five_rs/classic/
If you try to restore and get a1429 error message, read this Apple Support Article
http://support.apple.com/kb/TS1372
Good Luck! -
My iphone 6plus won't sync my calendar from outlook 2010. How can I fix this?
My iphone 6plus won't sync my calendar from Outlook 2010. How can I make this work again?
If you put information into one calendar and it synced to the other phone, then it sounds as if you are using iCloud, not Outlook. You need to check that. When I asked about the type of calendar, I was asking if this was your own Outlook, or were you using a work Exchange calendar. If you don't know the difference, I would say it is probably personal. If you look at calendars in the bottom center, are there more than one calendar listed? Do you see an ICloud calendar? Do you see an Outlook calendar?
-
my i pad is connected to my wifi network bt won't connect to the internet I have tried resetting network connections. it will connect to the internet from my phone hot spot
Try restarting your WiFi router by removing power to it for 30 seconds.
-
When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
How can I make a Face Time call from one country to another( supporsing both parties using iphone 4s). What will be the caller charges. If there is no charges as we use wifi, will there be a charge till connecting the call?
FaceTime is free to use. You will not be charged for using FaceTime.
-
My iPhone 5 is not showing up in iPhoto over WiFi.
Is this normal?
Or will it only show up when I connect with USB ?It will show up, when connected directly by USB as a camera.
-
When I am connected to my home wifi, it says I am connected but the 4G icon doesn't go away. How can I make that go away when I am connected?
When I'm at my home, and on my Wifi, my 4G icon on my LG G2 is still present. No big deal. If the bits can flow via WiFi, that's what they'll do.
You might try (if you really MUST shut off the cellular radio):
Settings, Network Connections and More networks. Select Mobile Networks and uncheck Mobile data and data roaming.
Not sure if that will work - but give it a try. -
Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks
Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
I tryed the reboot pocess, but it didn't fix it
I haven't tryed the restore to factory settings process,
Is there a way to downgrade to iOS 5.1 again?
Thaks -
How can I make my wifi connection automatic?
Hi All,
we have a Timemachine and have a network setup on it. How can I make my connection to that network automatic when I turn on my macbook and eliminate all other close by net works? please email me at: [email protected]
thnks
Keni would like to know how to make my wifi connection invisible to others
This is not really possible, since there are any number of free utilities on the Internet that will reveal a "hidden" network in seconds. Anyone who wants to see your network will be able to do so very quickly and easily.
iOS devices like the iPhone and iPad often have difficulty connecting to a "hidden" network as well.
If you still want to do this......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Wireless tab at the top of the next page
Click the Wireless Options button near the bottom of the page
Enter a check mark in the box next to Create hidden network
Click Save
Click Update at the lower right of the window and allow a minute for the Time Capsule to restart -
I have recently inherited my fathers G5, it works on 10.4.11, how can I make it wifi capable so I can hook it up to my smartphone like I do my macbook pro
Does it have an Airport card? - if not you can buy one.
Click Apple menu (top left of screen)
Select About this Mac
Select More info
Open Network/Airport card -
Just restored my iPhone 5 from iCloud. My wife and I have always shared one iCloud ID. But since my restore, when a call comes in, it rings on both my phone and hers. How can I make this stop? We had it all set up fine before the restore, and there was a trick to it in the settings. I've noticed that since my restore, her phone has picked up what looks like the symbol of a phone in the upper right corner of the display, right next to the Bluetooth symbol.
Hi Big Slick,
Welcome to the Apple Support Community!
It sounds like your iPhones may be using a new feature in iOS 8 called Continuity. The following article and information explains how to set up this feature for phone calls. You can review the information on the setup to reverse this effect. My suggestion would be to turn off FaceTime on one of the devices.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Phone calls
With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
To make and receive phone calls, here's what you need:
Sign in to the same iCloud account on all your devices, including your Mac.
Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
All devices must be on the same Wi-Fi network.
All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
Cheers,
Joe -
MacBook Pro (OS X 10.9.1) calendar continues to "connect to server" and will not allow shut down or restart. Force quit worked. How can I make this calendar usable? The problem began after I updated to Maverick.
babowa, it seems like it is using Fuse & NTFS, so I don't think it's the classic WD + 10.9 mess, but extra WD tools & drivers can still break things MtTran.
MrTran, if you must use unsupported disk formats on your Mac you must also consider actually paying the developers that made the trial software.
It's probably a good idea to follow the developers removal instructions, reboot & then install one tool at a time.
MacFuse, FuseOSX, NTFS-3G are all likley to confict if you run older versions so you need to be sure you are using the latest version. I can't remeber which one depends on the other, so you will need to read the manuals.
When the disk is readable copy the data to another disk. You could probably do this from a Linux distro or Windows if OS X won't do it.
If you insist on only using the trial versions you will need to reinstall Mac OS, copy data off this disk & reformat it.
Is there any good reason for not using the Mac HFS extended format? -
How can I make my 3G take over when my wi-fi has connectivity issues?
My wi-fi usually works fine but every so often it starts to work very slowly and usually not at all. How can I make it where I always stay connected to the wi-fi for the speed and convenience, but then my phone switches over to 3G connection when it can't receive data via it? I have an iPhone 4S so I've been having trouble making this work.
You can turn off WiFi from the pull-up menu on the bottom (swipe up from bottom of device and click on the WiFi symbol to turn it off).
You can see link for more advice:
http://support.apple.com/kb/TS1398
Maybe you are looking for
-
Hello, I have a problem with InDesign tags. I hope I've mapped tags to styles correctly, but suppose this: you have a tag inside another tag, like subscript inside italics. I then need the subscript to be italics as well. This seems to be a bit of a
-
Length of the p_file_name in wwsbr_api.upload_blob
Hi, I am uploading blob file on portal 10 with wwsbr_api.upload_blob ( p_file_name => p_doc_name, p_blob => l_doc_content.doc, p_mime_type => l_doc_content.mime_type) the problem i have is that if the length of the p_file_name exceed 60 char it is tr
-
I need a keyring (that works with network-manager)
Hi there, I'm new to Arch linux (coming from Ubuntu) and I'm wondering how to set up a keyring that works with that gnome-network-manager applet and ssh(fs). I previously used GNOME and the gnome keyring, and all out of the box. I couldn't find any m
-
How to install only OATS for Functional Testing ?
How to install only OATS for Functional Testing for Oracle EBS? I tried micro installation, but installation tried to install whole test manager/oracle xe db/Weblogic etc.. I want to evaluate how it works, can we leverage for Functional/regression te
-
Way to control which compiled help appears to user?
Just to provide a little background--I have been working with Robohelp for years as an author but basically have no technical expertise. I write topics, press buttons in robohelp to generate compiled help, and that's it. So here's my issue: We will b