Wifi / WPA Security Issue- Need Help- Any solutions??

I've searched everywhere for a solution to this problem- it seems widespread, many people have had the same, but has anyone solved it? Desperately looking for a solution!!
Problem: I'm on OSX 10.4.11. Connecting to my wifi router via Airport from my Mac Pro. When any type of security is enabled at the router (WPA, WPA2, WEP, etc.), my internet connection gets dropped after a few minutes. This happens for other Apple devices on the network, like my iBook (also on OSX 10.4.11). Even my iPhone. Only short term solution is turning Airport off and on again. But the problem recurs after a few minutes.
With security turned off at the router, all is well. (But then I'm on an unsecured network.)
At first I thought it was the router, but the problem persisted with a new router.
Any help appreciated... this is very annoying yet I haven't found any solution anywhere...

Neither. The first was a D-Link and the current is a Tenda.

Similar Messages

VPS windows server 2008r2 RDP security issue, need help!

system: VPS windows server 2008r2 at a remote location, directly exposed to internet
Administration is possible only via Remote
Desktop.
I cannot disable&replace the default administrator account with a different username...which means I get a lot of brute force attacks.
I created rules in the firewall to limit the scope of the remote IP addresses, even limited the scope of the RDP rules down to my client IP address only.I tested the rules by trying to
access the vps server from a wifi hotspot (starbucks was useful for once) and indeed I was not to rdp into myserver.
Yet I still find Nigerian , chinese taiwanese iranian and so on based IP addresses in the event log under audit failures.
I didn't want to limit the ip scope, because if my ISP changed my IP address ,I'd lose access to my VPS server... then again, why are the Nigerians still getting in?
Anyway,
is there a way to replace the username and password login with a public/private key method like it is under Linux? Or perhaps is there a better solution?
Hope someone can help.
Thank you in advance!
Paolo

So, your suggestion gave me an idea.
First I discovered why the Nigerians could keep getting in....a rule for utorrent opened everything...! That rule is gone now.
The idea is as following: lock the RDP to the one ip address I use but install a SSH server open to any IP address that mandates key pair based logon only,using a public/private key pair that I only obviously have.
Brute force will never work on a key pair only login shell. Let them
try it if they want. (Assuming nobody manages to crack my home network and steal my files :-)
If my ISP changes my ipaddress, I can login via SSH and modify the firewall rule (which I tested already).
Of course this works for people like me who just have a VPS server for personal use with a very clear knowledge from which ipaddress they access their server.
Anyway..hahahah take this Nigerians & Co hackers!
Ok thanks for your inspiring suggestion!

For this issue Is there any solution in Standard solution or any Developmet

Hello Friends,
I have one issue that is
When ever the forecast is release from DP to PPDS (Monthly - days) of a material quantities should be bucketed into Monthly bucketed quantities and split into day level ( e.g: Product1 1st week 1000ton, 3rd week 2000ton , when it releases system aggregates the quantities and depending upon the product profile and setup time it shold give me result as product1 -3000ton in day 1 and product2 --2000ton on day 2 ...so on) .Standard SAP APO release of Monthly forecast quantity to daily bucket is divided into 30 or 31 days and split the quantities equally( e.g: Product1 1st week 1000ton, 3rd week 2000ton , when it releases system aggregates the quantities and divides in 30 days in a month and split the quantities equally).
For this issue Is there any solution in Standard SAP or any Developmet is required in APO-DP.
Pl Through me some lights on me .
Regards,
sivaram76.

Hi
If you are using u201C/SAPAPO/MC90 for releasing the FCST , I think you can define different Planning Buckets Profiles according your requirement for example according your needs for disaggregation of your FCST. A planning buckets profile contains the periodicities or a subset of the periodicities that you defined in the storage buckets profile.
Once you maintain the planning bucket profile you can put it in tab Daily Buckets Profile while releasing the FCST.
It will be nice if you please cross check it its meet you requirement.
Thanks
Amol

LCD monitor display issue, need help

I have a strange problem with my LCD display, it goes like this:
When I first boot up the mac and the wallpaper appears on the display the image looks perfect, all the tones are right etc, but as the startup progresses, programs loading etc, the display changes suddenly, becomes too bright in the highs, too dark in the lows, and over-saturated in between. Its looks horrible.
I have just discovered that I can correct the issue by going into system prefs, display, selecting the options tab (next to Display and Color) and turning overscan on, then back off, voila, all fixed.
Looks great.
Thing is I have to do this every time now that I start the computer, and Im wondering if anyone knows what causes this issue and if theres anything I can do as a more robust solution.
The kicker is I have the same problem with a viewsonic LCD on my secondary machine (Powermac G5, Osx 10.4), right at the beginning of startup it looks great then suddenly all goes wrong, too dark/light over-saturated. Its as if the image has been blended with itself in multiply mode a la photoshop.
And on my second machine there is no option for overscan so I cant use my quick fix.
Is overscan a feature of the OS or the monitor?
The worst part is I need these displays to work correctly because Im a graphic designer, I need my colors to look right so I can do my job, and while I could go buy a $1000 monitor its not possible atm, and Id kinda like to know why this problem occurs. So if I do buy a different I can be assured the problem wont rear its ugly head again. But I dont think the problme is the monitor. I think its something to do with the communication between the display and the computer.
The monitor can display correctly, and does for a brief moment, then it all goes very wrong. Ive spoken to NEC and they werent much help but Ill be trying them again today too.
But again, I thinks its the computer, not the monitors as I can reproduce the issue swapping out monitors.
I hope Ive described it adequately,
Thanks in advance for any help forthcoming, this is very frustrating and is causing me endless headaches.

Mattdp,
I am currently having the same problem with my 20" cinema display. Did you ever find a long term solution? Apple states that the PowerMac G5 is legacy with no support available, and suggested a reset the PRAM. I did so to no avail. I too have 10.4.11 and thus no "overscan" to turn off. This is my wife's primary computer for her photography business, and the color issue needs to be resolved as quickly as I can find the answer.
Is there a possible solution through the terminal?
Rick

T400 LCD dim issue - Need help!!

I'm having a LCD dim issue with a T400. Have changed the LCD panel, LCD cable and systemboard but still having same issue. If i removed the lcd card, then the display is working fine. I've tested the lcd card in another working unit and it's working as well (means the lcd card is working). I use a working lcd card and plug into this T400 but LCD still dim.
I've try to switch the problematic lcd cable and lcd panel to a working systemboard and it kills the systemboard. Have try to switch a few things but still unable to find the root cause. Urgently need help on this. Any advice will be appreciated.
Model : 6475-RM5

hey bhoh
i suggest uninstalling your current graphic card driver, let windows install its own generic drivers and see if that makes any difference
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Firewall Issues - Need Help Please

Hi
I'm new to Apple and love the machine, but I am having a problem with the firewall on my router. Let me explain the setup, then the problem...
I have the following in my home network:
1 hp desktop running Windows XP Media Center Edition, SP3 (Professional)
1 Belkin wired / wireless router
1 Canon Pixma MP500 Printer set for Sharing (Connected to hp desktop through USB)
1 iMac 20" running Leopard OS
The hp desktop and the iMac are both hardwired to the router. The router's security settings are as follows:
Will NOT broadcast the SSID
Mac Filtering is ENABLED
WPA-PSK Security ENABLED
Wireless connectivity is ENABLED (For Wii, PSP, and Xbox 360)
Now the problem...
Everything on the network works beautifully, except the iMac. It will not allow iChat services, will not allow sharing of the desktop with other iChat members. It does, however, connect to the internet, but will not access the hp shared folders or printer. When I attempt to even add the printer, the printer does not even show up. I DO have Bonjour installed on the hp, but when I run Bonjour, I get a message that reads something like, "There are no Bonjour enabled printers available."
I know it is the firewall built into the Belkin router because I placed the iMac into the Demilitarized Zone, and everything started working as expected. For those of you not familiar with DMZ on the router, it basically allows you to pick an IP address to place outside of the firewall, so you can keep the router firewall enabled, but you can choose an IP address (i.e., a computer) that is not behind the firewall.
After placing the iMac in the DMZ, I went to add the shared printer on iMac. Not only did it show up immediately and give me the ability to add it and print to it, but I could also browse shared folders on my hp. I was also able to connect to a friend on iChat, and we were able to share each other's desktops.
I can provide more information if needed, but any help on this matter would be greatly appreciated.
Thanks a lot.
Message was edited by: Wheelermdw
Message was edited by: Wheelermdw

I forgot to add that before I placed the iMac in the DMZ, I opened up some ports on the router that allowed iChat communication, so a comprehensive list of ports that need to be opened might solve these problems. I do not know where to find such a list, but I think that might work. If someone could provide a list, that would be great. I will update this post and let you know if the list was successful.

Concurrent crystal license timeout Issue, need help.

Hi,
My company is using crystal enterprise 10 with 18 concurrent user license.
However, we often hit out of crystal license issues.
Does time to wait for exporting crystal reports to excel/pdf takes up licenses?
Does time to wait for crystal report to be printed or viewed on the web browser takes up licenses?
We all know that user sessions take up user licenses. 1 user login take up 1 license.
Does crystal pruning job takes up user licenses too?
Need help urgently, much appreciated.

Hi Daren,
Support on Cystal Enterprise 10 has expired. Make sure that your users are actually logging off and not just closing their browser.
One user can take up multiple licenses by not logging off or opening multiple browsers to view multiple reports. Scheduled jobs that are running do not take up license, but a user veiwing a historical instance does take up a license.
In your metrics tab in the Cyrsatl Management Console -> Servers-> cms you should be able to see the active number of sessions- system connections are backend connections between the servers and these do not take up any licenses.
Best Regards,
Jadie

Stuttering flv playback issue- need help asap

We need help asap. Have a project is due to deliver today (5/14).
We have a video to go on a dvd-rom, live action with Motion Graphics behind.
When output is done thru Projector the Motion Graphics stutter as they scroll.
Here is more technical info:
Stuttering flv playback issue:
Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
Frame by frame analysis shows all frames are present with no jumps tears or skips.
Tried several output paths, programs and settings to create a smooth flv file to no avail.
We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
We adjusted keyframe rates from low to all frames, no luck.
We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
Playback in the flash projector seems to choke slightly no matter what we do.
Have also posted in the Director Forum.
Any help much appreciated!

Here are a few ideas off the top of my head:
Try playing the file using a different xtra, sometimes different ones will work better. If you have Director 11.5, there is a native flv playback xtra.
You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
Once you have the video in Director, try making the member Direct To Stage (DTS). If it is already DTS, try making it not DTS.
Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
Try lowering your video's data rate further or try using a different codec.
Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
Try compressing the flv with different software. FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

Spry Menu Bar issue, NEED HELP...???

Here is the coding for a menu bar that i created with CS3, for some reason i am having an issue when i open the web page in IE, on firefox and safari it looks fine, the menu drops down to sub menu's fine, but for some reason when i open it in IE, the submenu's show on the very top of the page rather than right below the menu itself, please check my coding and see if there is an issue???
i ran compatability and there are no issues shown.
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - Revision: Spry Preview Release 1.4 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 10.4em;
    float: left;
    background-image: url(tab2.png);
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    position: absolute;
    left: -1000em;
    text-decoration: underline;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto;
    background-image: url(../tab1.png);
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
    width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
    display: block;
    cursor: default;
    padding: 0.5em 0.75em;
    color: #FFFFFF;
    text-decoration: none;
    border-left-color: #0063bd;
    border-right-color: #0063bd;
    border-right-width: 3px;
    border-left-width: thin;
    font-family: Calibri;
    font-weight: bold;
    font-size: 19px;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
    color: #000000;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    color: #000000;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarDown.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarRight.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarDownHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
    display: inline-block;
    f\loat: left;
    position: relative;

Hey gramps, thanks for the info, i have updated my spry framework to 1.6.1 but the problem is still the same, i recreated my menu with the new 1.6 and it still doing the same thing, the submenu's are like vertically reversed... ugh need help.
here the new code
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 10.4em;
    float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    position: absolute;
    left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto;
    background-image: url(../tab1.png);
    line-height: 18px;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
    width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
    display: block;
    cursor: pointer;
    padding: 0.5em 0.75em;
    color: #FFFFFF;
    text-decoration: none;
    font-size: 19px;
    font-family: Calibri;
    font-weight: bolder;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
    color: #000000;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    color: #000000;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
    display: inline;
    f\loat: left;

RSI Issue: Need help on IBM/Lenovo external keyboards w Trackpoint? Pic

Need help on IBM/Lenovo external keyboards w Trackpoint? Pic
I started my journey with Thinkpads on a T42, then T43.. then T61, X61T, R61 & T410 (bought for 2 cousins & they love it), W510 (dads new laptop). I may be a much recent convert but I swear by them now.
MAJOR ISSUE: Recently started feeling RSI (Repetitive Stress) & Carpal Tunnel symptoms (already doing stretches.. adjusted the desk.. & finding new adjustable LCD stand) since I am not using the Thinkpad directly... but using it docked with an External keyboard. Lot of Mousing as well. I'd like to go back to Thinkpad FEEL... or atleast have keyboard with a pointing device so my hands dont have to keep moving back n forth.
So, it would be great it some of my fellow T4x/T6x/X6x 'ers would guide me a bit on this... share their first hand experience, or what they've seen on these keyboards and feel free to point me to reliable sources of information.
Currently this would greatly be use with T61 - Adv Mini Dock - 30" XHD3000 LCD as shown in my signature below.
Anyone who has used or know something about one of these Thinkpad related keyboard (ideally both of these to give a comparative response).
Which of the following have you used?
How was the experience?
(Maybe point me to thread with peoples experiences)
If you've used several, which one do you prefer / recommend? Why?
At the moment I have a "slim" BTC 6200C desktop keyboard. It has laptop like scissor keyswitches, so I like it the slim notebook like profile.
The way I have positioned my 30" LCD I'd like to be able to keep the keyboard on my lap at times while on my chair and maybe on the desk at times.
ThinkPad Full-Size UltraNav USB Keyboard
The keyboard and trackpad of the IBM Lenovo Thinkplus USB Keyboard with Ultranav:
ThinkPad Travel UltraNav USB Keyboard
The travel version of the above:
Newer:
ThinkPad USB Keyboard with TrackPoint
A 2009 replacement for the previous one but not the full keyboard nor wireless:
Thinkpads:
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP
Dell:
Inspiron 9300: 17"WUXGA/NVidiaGeForce6800/2.2PM/2G/XP (old)

I had the same issue - had to go to voice command for a few weeks (sucked) wore wrist gards to keep things netural.
Everything went away when I changed to a USB keyboard with the Ultra nav (I use the track point and disable the pad).
I've been working like that for 6+ years now... no issues.
(as a side note, sleeping with wrist guards on helped heal me the fastest. I had neoprine, with a metal plate in them - from a local drug store)

HT1725 Message says Apple ID is Disable how do I fix this. I changed my password 4 times already. It's not a security issue Please help me. Thank you

Please help me ever since the update every time I try to order an App I get a message saying "Apple ID I'd Disable" I've changed my password 4 times And changed my credit card also I don't think it's a security issue. Thank you

Hi Melivan!
I have an article here that can guide you through some steps for dealing with your disabled Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Odd mail issues, need help

A couple of things I need help with.
1) Mail constantly goes offline and pops up a dialog box asking for my password. I enter my password in the box and hit okay and it doesn't take. I can hit cancel and put mail back online but that's a pain. What is causing that and how do I fix it?
2) People send me mail and then about 30 min later I get the same email again. This problem doesn't happen with every email, just some.
I have no mail rules on. and I run virus software and it's fine.
Can someone please help me on this. Thanks!
1.25 GHz PPC G4 / 20" Mac OS X (10.3.9) 768 MB DDR SDRAM, iSight camera, Wacom Tablet

Open /Applications/Utilities/Keychain Access, choose Keychain First Aid from the application menu, and proceed to repair the keychain. If that doesn’t work, you may try removing the password entry from the keychain and letting Mail create it again.
Also, in Mail open Help > Mail Help and read the article titled “Mail keeps asking for my keychain password”, in case it applies to you. There is a related article titled “My password is not saved” that you may also want to read, but beware that the last suggestion provided there (deleting the mail account) is wrong and could cause irretrievable data loss if this was a POP account.
Note that Mail doesn’t always correctly report what the problem really is. If Mail can connect to the server but cannot log into your mail account for some reason, it’ll ask for your password, regardless of whether that’s really the problem or not. Don’t keep entering the password every time, because that’s not the problem (click Cancel instead, and take the account back online afterwards).
What’s the time interval chosen in Mail > Preferences > General > Check for New Mail? If it’s set to Every minute, try changing it to Every 5 minutes.
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
Also, try using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible, i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc., and see whether that makes a difference.
BTW, if you’re using Mac OS X 10.3, as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Mac OS X 10.3 & earlier forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

HP NC2400 Drive cable issue : need help

Can someone please send a picture of what an installed zif harddrive drive for an NC2400 looks like ? Does it go topside up or down ? How does the cable look when installed ? Need help. Does anyone have a spare harddrive cable ?
Any help would be much appreciated!!
Bill C.

This manual shows the drive with the metal side Up
http://h10032.www1.hp.com/ctg/Manual/c00741440.pdf
Service manual here, it does not show the cable as a separate part of part number
Click Me
You will need to contact HP parts
http://partsurfer.hp.com/ContactUs.aspx

Wlan Security Issue urgent help needed

Dear Community,
i have a wlc 5500 with two ssids for employees and contractors
both ssids with layer2 security WPA+WPA2 and auth key mgmt 802.1x are authenticated with ACS 5.0 (active directory) for users access and are working fine after windows adapter setting
but my question is, can i do some thing like
authentication with acs 5.0 (active directory) for users access but without windows adapter seting????
i mean without changing any setting on windows adapter ( leave it as default).
if i can then how i can???
or i cann't do that i mean there is not any option to do that?
plz give me your seggustions i need urgent help on this topic.

thanks for your reply George
it seems only for 802.1x authentication key methode needs windows adaptor changing as per you.
is there any other option to configure wlan scurity with acs (MS active Dir) user authentication like
let me tell you something
i want when any client will try to connect any wlan he ll just prompted to use his username and password(of active directory) without doing any changes in window adapter setting???
i don't care layer 2 security will be whatever like wpa+wpa2 with 802.1x OR something else
can i do that or no ??
if yes i can than what type of security?
please don't tell me about webauthentication i already know about that and i ll use that mothed for GUSET-Wlan.
kindly reply me soon
Thanks

Security.properties file issue - Need help

Hi Friend,
I am trying to setup SUN IDM connection pool and getting this error. Can some one help me how to fix this issue.
java.io.FileNotFoundException: C:\Sun\AppServer\config\security.properties (The
system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at com.sun.enterprise.util.Utility.getPropertiesFromFile(Utility.java:42
at com.sun.enterprise.iiop.POAEJBORB.<clinit>(POAEJBORB.java:78)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at org.omg.CORBA.ORB.create_impl(ORB.java:295)
at org.omg.CORBA.ORB.init(ORB.java:336)
at com.sun.enterprise.util.ORBManager.createORB(ORBManager.java:138)
at com.sun.enterprise.util.ORBManager.init(ORBManager.java:65)
at com.sun.enterprise.naming.SerialInitContextFactory.<init>(SerialInitC
ontextFactory.java:31)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
54)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.waveset.util.JdbcUtil.getDataSourceObject(JdbcUtil.java:571)
at com.waveset.repository.RelationalDataStore.setupJdbc(RelationalDataSt
ore.java:3834)
at com.waveset.repository.RelationalDataStore.init(RelationalDataStore.j
ava:3779)
at com.waveset.install.RepoMan.check(RepoMan.java:1194)
at com.waveset.install.RepoMan.setRepo(RepoMan.java:1082)
at com.waveset.install.RepoMan.main(RepoMan.java:1314)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.waveset.util.CommandProcess.invokeMain(CommandProcess.java:212)
at com.waveset.util.CommandProcess.launch(CommandProcess.java:162)

Hi rhayn, I think you're getting confused about what "file sharing" really is used for. You need to say to yourself "do I want someone on another machine to access these files?" If yes, you need file sharing; if no, forget about it.
So, the second user, are they on another machine or are they using the same mac as you?
Just as in windows, when you share a folder over the network, you can set different permissions on the "share" compared to the permissions on the files and folders themselves. In all cases, the most restrictive permissions apply. Therefore if you give read/write to the shared folder (the "share"), but a folder is read only (to the second user), they will be able to view the list of files in that folder, but not open them (equivalent to the windows permission called "list folder contents"). If the folder was read/write, the second user can create files and edit them. If the folder is read/write and existing files are read only, they can open them but not save changes. Where OS X differs from windows is the mechanism for setting permissions; OS X uses the unix/posix permission system. In addition, if you are the owner of the folder or file, you can always do anything with the folder or file.
All of the above paragraph is only information you need to use IF the other user is connecting to your mac from ANOTHER computer across a network.

Wifi / WPA Security Issue- Need Help- Any solutions??

Similar Messages

Maybe you are looking for