Wifile pro - smb problem

I am trying to get WiFile Pro on a Palm TX to connect to a Macbook over wifi. The mac has to have windows smb sharing turned on and I have done that. It connects OK but then the WiFile Pro on the palm reports that the connection has been dropped. If I look in the System log on the mac there is an smbd process crash report starting out with
Process: smbd [519]
Path: /usr/sbin/smbd
Identifier: smbd
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: smbd [498]
Date/Time: 2008-06-13 23:23:00.385 +0930
OS Version: Mac OS X 10.5.3 (9D34)
Report Version: 6
Exception Type: EXCBADACCESS (SIGABRT)
Exception Codes: KERNPROTECTIONFAILURE at 0x000000000055c000
Crashed Thread: 0
Any ideas ?
Thanks - Michael
PS - I have used wifile pro before on previous macbook and pre 10.5

Hi Michael,
I've been having the same trouble with my TX. What I can tell you is that it is clearly a Leopard problem, since I can successfully connect to a MacBook running Tiger - and everything worked fine (as it did in the past with my previous G4 iBook under Panther and Tiger).
Also, I did successfully get an ftp connection to my Leopard MacBook Pro via my Airport Express base station. I had all 3 file sharing options turned on and the firewall on 'Set access for specific services and applications'. However, I have not yet been able to get either ftp or wifi to work via a peer-to-peer connection ('Create network' under the Airport menu).
Similar problems plague my efforts to sync with Missing Sync via wifi. I may occasionally have managed to hit on the right combination of settings, but I can't recall them.
Hope this might help a little.
As for me, the iPhone is beginning to appear in my dreams!
John

Similar Messages

SMB-problem: can see/manage files, but cannot open from Windows 8.1

I have some files shares on a Mavericks server (clean install, including OSX Server). I can connect and see the shared files from my Windows clients (both 7 and 8.1). I can even create files, rename them, etc. From Windows 7 i can also open and edit them. So far, so good!
From Windows 8.1 however, opening does not work: simple text-files and pdf's don't open at all (server cannot execute instruction/file already open), office documents can only be opened in read-only mode.
In the System log (on OSX Server) are a lot of lines like: smbd[714]: File system does not support 0x0 time attributes (or does not support 0x400000, file attrs).
Using Windows Power Shell, I figured out that there is a SMB2.1 connection between Windows and OS X, which seems
to be correct. It appears that OS X judges that Windows is using one or more wrong parameters in an SMB-system call.
I had lots of SMB-problems using Mountain Lion (Snow Leopard server was fine). I don't want to force my Windows machine to use SMB1 (for all shares) using the commands found in http://support.microsoft.com/kb/2696547 (I didn't try yet).
Any help would be appreciated.

So I have the exact same issues. I actually called Microsoft Support and they tried a bunch of different things. They even tried disabling SMB 2 and 3 on my Windows 8.1, but then I was unable to connect to my OS X 10.9.1 Server share point at all anymore!
Here is what I found out. When I start up from my 10.6.8 Server backup on my Macmini Server, and then mapped the network drive on letter G on Windows 8.1 Pro client machine to that very same share point - worked like a charm. I can read , write and such all fines on that share. All is well. Leaving the Windows 8.1 client alone, on the macmini server I selected the upgraded 10.9.1 Server volume and restarted the Macmini Server. After restart, guess what, I was able to perfectly access the files from Windows 8.1 on the OS X share point which of course was still mapped as drive G on 8.1 from earlier.
Now here comes the kicker. I went ahead and restarted Windows 8.1 and then everything went haywire! I opened the Windows 8.1 desktop and brought up My Computer. I saw that the mapped drive G is no longer connected (red X). I went ahead and double clicked it and then Windows Explorer simply hug itself and wouldn't come back. I had to force quit explorer and ended up ultimately restarting Windows. After restart I went ahead and disconnected the mapped network drive (G), and then re-mapped it. I authenticated with the very same username and password as before. This time I am able to see all the files once again, but can't open or work with any of them. It is super jinxed. In my opinion there is a severe bug in Apples SMB 2 or smbx or whatever they call it. Why couldn't thy just leave it alone and pay a licensing fee and use Samba? It's just so stupid!!!!
Apple, you must fix this problem. I will tell the server tech that I have been working with the very same thing. They should have never release 10.9. It was premature and not ready for prime time. It's good to know that there is a work around however. It is super teadious, and spastic, but hey, at least I get it to work. Either it has something to do with authentication, or the way OS X 10.9 responds when mapping a network drive on windows 8.1 pro? No clue.
Apple does not pay me to Q&A their software. This stuff should simply work! I am ****** off and have wasted now over 3 weeks of my precious time banging my head against the wall with Apple stuff.
Come one guys, get your stuff straightened out. thanks.

I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth

I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks

How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions?

Adobe Acrobat Pro 9 problem

Software:Adobe Acrobat Pro 9 problem
Issue: Whenever the end-user runs the PDF maker in Word 2003, it converts the file fine but when you close the PDF and return to the Word document, it shows the progress bar is still working to create the PDF.
Related? In the Event System log, an error for SidebySide with the Event IDs of 32 and 59. I couldn't determine if these errors relate to each other.
System: Windows XP Professional, sp3

use the below link:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 6| 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Using techtool pro found problem with "volume structure". What to do?

Using techtool pro found problem with "volume structure" and this was not fixed by TECHTOOL PRO. What do you suggest I do?

I would boot from my gray install disk (put the disk in the drive and restart holding down the C key). Then choose Utilities and run Disk Utility and click Repair Disk. As always, be sure you have a back up of your data first.

Unable to launch Adobe Acrobat Pro XI (Problem Event Name:APPCARSH)

Following message received while trying open Acrobat Pro XI
Problem signature:
Problem Event Name: APPCRASH
Application Name: Acrobat.exe
Application Version: 11.0.7.79
Application Timestamp: 536b812b
Fault Module Name: Acrobat.dll
Fault Module Version: 11.0.7.79
Fault Module Timestamp: 536b80ff
Exception Code: c0000005
Exception Offset: 00cbf281
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1055
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Need urgent support please....

Hi KemalAFARACI,
Please try the following :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Launch Acrobat in the new enabled Admin user account and check.
Regards,
Rave

I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook

I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook

Nope. You can purchase a Snow Leopard DVD for $29.00 through an Apple retailer or ordering from AppleCare:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.

MacBook PRO 17'' Problem?

MacBook PRO 17'' Problem?
I bought in America a new Macbook Pro with me already 8mj:
Model Identifier: MacBookPro4, 1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.5 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03
SMC Version: 1.28f1
GeForce 8600M GT 512mb GeForce 8600M GT 512MB
Type: DDR2 SDRAM 2 pieces
Size: 1 GB
Speed: 667 MHz Speed: 667 MHz
sometimes my ignition pocme blow 2puta quickly and fit 1s and thus prove it does not poweroff, the display has no image.
or when booting the mistake occurs in the image:
sometimes when booting the error as shown in the picture!
but more frequently happens that does not powered up LCD! ONLY PROVIDES NOTICE ACOUSTICAL 2puta quickly and fit 1s, etc. ...
When it poweroff so again uplalim all work properly and I do not have any more problems! After re-ignition occurs again, the same situation!
I have made a hardware test and reinstalira OS X Leopard 10.5.6 Update! but again the same story, says that everything ok!
There is no additional peripherals except that I ordered from the apple store to upgrade my 1G still working memory SDRMA 667MHz
Thank you prayed that we would help someone because I do not know whom to turn to more ...
IMAGE: http://www.mackorisnik.com/forum/download/file.php?id=747
All details of problems in URL: http://www.mackorisnik.com/forum/viewtopic.php?f=7&t=6116

Your system profile is a complete blank!!
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.***
If you are still under warranty and/or have AppleCare, call them. Let them deal w/it.

IPhone music will not respond to Play button after being paused. The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

iPhone music will not respond to Play button after being paused.
The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed

Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?

http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know!

SB Audigy 2 ZS Platinum Pro RemoteControl Problem

SB Audigy 2 ZS Platinum Pro RemoteControl Problem] Hello everybody,
i have the following problem with my Audigy 2 ZS Platinum Pro:
BS: Windows XP x64 SP2
Driver-Version: 2.8.000 (PCDRV_LB_2_8_000
All works fine exept one thing, everytime I use my remotecontrol to adjust the volume the system loses the original configuration of the Channels.
When I view the settings, the Channel and 2 are correct but all others are asyncron. When?I reset the settings to standard then all is correct again until I use the remotecontroll again.
[url="http://www.bilder-space.de/show.php?file=02.06W4cdSxH7zgBIZmJ.JPG">Bevore RC Use[/url]
[url="http://www.bilder-space.de/show.php?file=02.069rNl8j665xFRdxu.JPG">After BC Use[/url]
Anyone an Idea?
<img border="0" width="" src="http://www.bilder-space.de/show.php?file=02.06W4cdSxH7zgBIZmJ.JPG" height="">
I hope anyone can help me
<img align="left" width="[/img] src="http://www.bilder-space.de/show.php?file=02.06W4cdSxH7zgBIZmJ.JPG" alt="before" height="">

I have absolutely same problem.
I use Audigy 2 Platinum.
Operation System:
Win XP Pro 32bit
Driver:
Creative Sound Blaster Audigy series Driver v.2.8.000
Applications:
Creative MediaSource Player-Organizer v.3.30.2
Creative MediaSource Plugin for Remote Control v.2.30.02
I use 5. configurations of speakers.
When, I use remote controller to adjust volume.
Front left and right channels working correctly.
Center, Low Frequency and Back Left channels apply max high volume level and don t apply any other volume levels.
Back Right channel apply max low volume level and don t apply any others volume levels.

Solution to common Windows 7 Xfi Elite Pro installation problem

Solution to common Windows 7 Xfi Elite Pro installation problems Hello,? I have just solved what I understand to be a common problem when upgrading a machine with an Xfi Elite Pro from XP to 64 bit Windows 7. Apparently the console control software for the "older" PCI Soundblaster cards for Win7 isn't done yet. If you've installed Win 7, updated the product identification module and run the new driver that you can find easily on Creative's support site and you still have no sound, try going to the Control Panel in windows. Switch the display to the "small icons" option and select "sounds".
Choose the "playback" tab. You should find a list of possible sound output devices that exist on your machine. You need to highlight the Xfi on that list and then click the "Set as default" button at the bottom of the screen. That should do it for you.
It did it for me.

C The 'solution' you provided only touches a very small fraction of the problems with Creative sound cards. Only very unexperienced users may not control which sound card is choosen by their operating system. Many of us work with PCs for decades, being used to modify the registry and so on. The drivers of Creative are of an unexcusable low quality.

My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,

My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,

Last login: Sun Apr 22 19:11:11 on ttys000
Marlons-MacBook-Pro:~ ryanmnhs$ ls -la ~/Library/LaunchAgents
total 40
drwx------   7 ryanmnhs staff   238 5 Nov 23:09 .
drwx------@ 48 ryanmnhs staff 1632 13 Jan 09:53 ..
-rw-r--r--   1 ryanmnhs staff   574 24 Oct 22:29 com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
-rw-r--r--   1 ryanmnhs staff   618 22 Oct 2011 com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.BAF380D0-E780-4E82-86BF-77 2440AB4936.plist
-rw-r--r--   1 ryanmnhs staff   895 4 Sep 2011 [email protected].plist
-rw-r--r--   1 ryanmnhs staff   802 21 Mar 12:56 com.facebook.videochat.ryanmnhs.plist
-rw-r--r--@ 1 ryanmnhs staff   805 6 Sep 2011 com.google.keystone.agent.plist
Marlons-MacBook-Pro:~ ryanmnhs$
,,,,,,,,THIS IS THE RESULT,, WHAT DOES THIS MEAN? HOW CAN I FIX MY PROBLEM? UP TO THIS DATE MY WORD, EXCEL AND POWERPOINT STILL DONT WORK!!!!PLEASE HELP ME, ANYONE? THANK YOU...

Mac Pro Fan Problem

Hi, I have been having some problems with a Mac Pro I have been working with. At the Start-up the Fan goes to top speed and once it logs-in the fan is still pretty loud. I've checking the Temperature of all the computer parts via a Temperature Diode, and its normal and not high. After searching the internet for hours looking for posts that were for the Mac Pro and not for the MacBook Pro (which comes up in about all the searches using the words Mac Pro Fan Problem) and I found some software all of which is not for Mac Pro's. Is there any application I can run do reduce the RPM of the Fans, Reset the Fan Speeds to only turn on when it get hot, or something along those lines.

Thats odd, seeing as Apple have it listed in the Support article:
To reset the SMC on a Mac Pro:
1) From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
2) Unplug all cables from the computer, including the power cord and any display cables.
3) Wait at least fifteen seconds.
4) Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
5) Press the power button to start up your computer.
It does exactly the same thing as the SMC_RST button, simply by removing all power from the system. I would assume the reason for this would be that the SMC settings are stored in RAM, which is erased once the power is removed from the board, hence the minimum 15 secs wait which gives time for the capacitors in the power supply and system to discharge.
So yeah, it does do the trick, or has done for me in the past a few times.

Windows 8.1 Pro SMB Sharing problem

Hi,
Would love some help.
I have a file server that I recently upgraded from Windows 8 to Windows 8.1. Problem is, it broke my smb share to 2 Dune Media players and another PC running XBMC on the Openelec platform. I have spent days scouring forums for information and tried
every reg hack and security/sharing fix I found but to no avail. I have since refreshed windows 8.1. I did however just have a breakthrough.
The problem is that the 3 devices above all worked great before the update, now I'm getting errors when ever I try to access a file on the smb share. On my Windows 8.1 file server I have am running storage spaces with about 8 discs amounting to about
16TB of storage, plus an SSD with the operating system. What I just discovered is that if I share a folder on the C drive, it can be scanned and accessed from any of the media players. Therefore it's only the 'storage space' drive that won't authenticate
an smb client.
Thanks
Allan Phillips

Thanks Alex, I had tried that a few times. Finally after 3 weeks I found the solution on the WD forum. Solution is as below.
Re: WD TV Live does not see shared windows USB drives that are connected via hub
Options
‎01-24-2014 12:46 PM
Well, nobody offered any opinion so far, but I was able to solve the mystery.
It is all about the old IPRStackSize of the LanmanServer (Windows NT is greeting us again).
I was taken off, because access seemed basically to work (at least with Windows machines).
But the Windows 8.1 event log then told me very clearly : event 2011, irpstacksize not large enough, please increase.
This event occurred whenever I tried to access the shared drives from my Android devices or especially from the WD TV Live. The only difference netween these 2 systems was that on the Android devices I could at
least see the drives (but could not really open them), while the WD TV Live did not even boither to show me the drives.
Now, I have no clue about the actual limits for the IRPStackSize in Windows 8.1 (the values changed from Windows version to Windows version). So I finally used the limit I found for older Windows systems :
32 (x20).
And it works now like a chram as it seems.
By the way - I found stories about older Windows systems, where people increased the value to 20 (x14). So I tried that value first. With the result that I could not access any drive from other network units at
all. So, the default value for this in Windows 8.1 must be even higher than that. I don;t know what it is, but 32 (x20) is obviously higher.
Long story short : it is a Windows 8.1 (possibly already Windows 8) problem. And it can be solved by creating manually an entry in the Registry to add the IRPStackSize parameter with the higher value (as you know,
when this parameter is missing, Windows uses a default value, which is obviously too small for drives connected to a hub and accessed by any kind of Linux systems.
I still don't have a clue, why the access request by a Linux based system requires obviously more stack size than a request by a Windows machine. That is still something that makes me shake my head.
Here a little procedure copied from Windows NT solutions :
1. Run regedit.
2. Navigate to the following key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters
3. In the right pane, double-click the IRPStackSize value.
4. In the Value Data box, type a value that is larger than the value that is listed.
If you created the IRPStackSize value using the procedure described in step 4, the default value is 15. It is recommended that you increase the value by 3. Therefore, if the previous value was 11, type 14, and
then click OK.
5. Close the Registry Editor and restart the computer.
If the problem persists after you complete the preceding procedure, try to increase the value of IRPStackSize even more. The maximum value for Windows 2000 is 50 (0x32 hex).
NOTE: If the IRPStackSize value does not already exist, use the following procedure to create it:
a.
In the Parameters folder of the registry, right-click the right pane.
b.
Point to New, and then click DWord Value.
c.
Type IRPStackSize.
IMPORTANT: Type "IRPStackSize" exactly as it is displayed because the value name is case-sensitive.

Wifile pro - smb problem

Similar Messages

Maybe you are looking for