Wii not Export to DV , iMovie502. quites all the sudden

I had no problem using i Move export back to DV as
I use to use iMovie to export edited video to DV with any problem.
with I Movie 5.01 and OS X 10.39 with whatever Quicktime
version that time were about 2-3 months ago.
However, after I upgraded to Tiger in one month ago and updated the Quicktime to 7.03. on iMac G4 17 inch , Now all of the sudden, i Movie will not export edited video to DV, it will quit suddenly.
I also used Emac G4 1GB for this export but the same result
as it quit !!!
However, This is very strange that
when I use friends's iMAC G5 with the same situation with the
same iMove and DV condition, it did export the image from iMovie
5.02 to DV, with no problem.
So, I am very confused.
Please anyone teach me what you know about this problem.
I would need to fix my iMac G4 17 flat for this iMove to DV export.
as I would like to figure out how to solve this...
I used IMovie 4.01, bit the result was the same for Imac G4 17 flat.
SO what can I do to solve this as I use to use it no problem.
DO I need to re-install old Quicktime ? or what ?
Please give me an advice what to do with this problem.

Hello Yuki:
Perhaps a downgrade for quicktime is in order
http://www.apple.com/support/downloads/quicktime701reinstallerforquicktime703.ht ml
Also, read all of the threads here;
http://discussions.info.apple.com/webx?128@@.68be6bac
Sue

Similar Messages

  • I am not able to download PDF files all the sudden.

    Recently I tried to download a manual for a PowerMac G4. I used my Intel iMac running Snow Leapard. I just got a message that ot could not downlaod the file. (I can't remember the exact language.) I researched it on the Web and it seems that the solution was to trash adobe reader, reboot. After that fix the permissions. Well, evey time I fixed the permissions so they were all fixed, Then I checked them again and once again they were wrong. I don't have a clue.
    One more thing, the 160GB drive ot so full that I could not install Snow Leadard. So I cloned the drive ans bought a 1TB drive. Then I had the Apple Techs at Micro Center swap out the drives. Everthing worked great and ten I intalled Snow Leapard. I now kick my self for cleaning the permissions before I swapped te drives.

    what I should do if I use the iPad . I can't fill forms from same website. And when I open the form online the adobe message come on the forme that tells me that I need version 11 of Adobe . What should I do . I am new on Appel gadgets   thanks folks

  • Safari quits all the time, can't find server, garbled texts

    Safari can't find server, will not browse, quits all the time, garbled texts, don't know if I am using  safari and snow leopard or safari with ox lion which i have upgraded recently.

    SOMETHING ABOUT THE HARD DRIVE  SYMBOL START UP?
    I don't understand this.
    I also disabled third party addons, is that wrong?
    If you mean Safari extensions, that's OK. Extensions are not necessary in order to use Safari.

  • When I am listening to the radio (streaming through itunes) my macbook pro will log me out, quitting all the applications I have running (often firefox, word processing, itunes, etc). Why?

    When I am listening to the radio (streaming through itunes) my macbook pro will log me out, quitting all the applications I have running (often firefox, word processing, itunes, etc). Why?
    It's very frustrating and I don't understand why it happens. It might happen other times, but I notice it the most when I'm streaming the radio through itunes, though I think it's also happened when I'm streaming music or shows from NPR, so I don't actually know if it's an itunes thing, or an internet thing? Or just my computer being stupid?  But how can I fix it?
    Thanks!

    My best guess at this point is a problem wwith 10.5.8
    It seems clear to me that sometimes, seemingly randomly, software will access the video card (flash player, quicktime, Safari's HTML5 video player, etc) and it will cause a freeze and then log out.
    However - it could just be video card + processor under load.
    This didnt happen before 10.5.8 and I'm thinking it's not the new 27" display causing the issue.
    I'm going to attempt to find time to revert back to 10.5.0 and then combo update back up to 10.5.7 which may be difficult as our IT is remote and we don't have access to Snow Leopard discs.
    I may just have to bring my own in.

  • Ichat unexpectedly quitting ALL THE TIME

    so it used to work fine, but now it quits ALL THE TIME. my friend has the same computer as me, and i'm pretty sure he has the same updates as me, and he has no problem. i don't really know what to do... i've tried deleting some plists like some people have suggested, but nothing seems to work. any suggestions? thanks
    -chip

    Hello -chip,
    Welcome to Apple Discussions.
    any suggestions?Of course!
    ... nothing seems to work.Have you tried repairing permissions and other routine Mac OS X 10.3/10.4: System maintenance?
    so it used to work fine, but now it quits ALL THE TIME.so..... If you mean it used to work fine in Panther, reinstall the 10.4.2 Combo Update, then, if still not working, try the other suggestions in Help for iChat AV 3 Problems.
    or so..... If you mean it used to work fine in Tiger, try the trouble shooting suggestions in the How Can I get iChat working again? FAQ
    my friend has the same computer as me ...You do not post which Mac and webcam you have. Nor do you post whether you use the same software and 3<small>rd</small> party hardware as your friend. If any of those are different, you might check for Possible hardware or software conflicts with iSight. (This may be a problem even if you do not use a camera. It is possible that you have a conflict with iChat AV itself.)
       <small>EZ Jim</small>

  • Photoshop quits all the time

    Photoshop quits all the time! and downloading images off firefox - quits all the time! Anything using images - Quits all the time! Snow Leopard - I'd like to quit and go backwards!

    David AC Holmes wrote:
    I'd like to quit and go backwards!
    Here is how I would proceed to go back to Leo. I would start by bootably cloning your Sno install on an external drive. The clone will be your backup, your migration medium, and your fail-safe device. You also could continue to experiment with this install and try to fix its problems.
    After doing so, install Leo on your internal drive via erase and install. You will need your original Leo install DVD to do so. After installing, you can restore all your data from the clone at the end of your Leo install. Under the circumstances, I would not restore your users, settings, and apps from the clone. Note that your choice will be to restore all apps or none. Be very careful about trying to just copy apps. You cannot copy many apps successfully from one install to another. Reinstalling almost all apps is my recommendation.
    You can use the same user name, password, and other such install-related data as currently is used on you Sno install if you want. If you connect to the internet via Ethernet, then leave your Ethernet cable attached during your install. But, disconnect all unnecessary peripherals during the install being prepared to plug in your cloned external at the end of the install--when your will asked if you want to restore from various sources. As mentioned, you would restore from your clone.
    Here are the basic erase and intall procedures.
    1. Erase and install using your install Leo DVD. To do so, start up from your install DVD; choose your language; use the menus at the top of the next screen to start Disk Utility; use Disk Utility to erase our drive Mac extended (journaled); quit Disk Utility; and continue your installation.
    2. At the end of your install restore your data files from the clone.
    3. Reinstall your apps by hand, including the iLife and iWork apps from your applications DVD.
    4. Repair permissions when you have completed all installations.

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

  • When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?

    When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?

    Hi there dworthen,
    It sounds like you are experiencing issues when trying to rotate your display. I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Screen does not rotate
    http://support.apple.com/kb/TS3805
    -Griff W.

  • My Facetime has always worked and now all the sudden when I try to log on from my Macbook it says the server has encountered an error with the server registration. This will not allow me to sign in. Anyone know how to fix this?

    My Facetime will not work on my Macbook Pro. This has always worked in the past and now all the sudden it says that I have encountered a problem with the server and registration. I tried to check the date and time zone which is correct and I have no restrictions set.

    I have the same issue. Does anybody know why this has happened

  • Question I have a dilemma . I added a lot of songs in my iTunes now when I synced my ipod this message appear "Elma's ipod cannot be synced because there is not enough free space to hold all the items in the iTunes library (additiona

    I addesd a lot of songs in my itunes, now when I synced my ipod this message appear "elma's ipod cannot be synced because there is not enough free space to hold all the items in the itunes library (additional 382m is required). Then I uncheck a lot of song and synced my ipod again same message appeared. Do I need to buy a new ipod with more memories? Somebody told me to check apply after I unchecked some of the songs but I cannot find the word APPLY. please help I'm not a very technical person.

    The Sync button becomes the Apply button, if you change the iPod's settings in iTunes.  If you are only unchecking songs in the iTunes music library, you click on the Sync button.
    When you select the iPod in iTunes, you see the iPod's Summary screen on the main part of the iTunes window.  There is a checkbox there for Sync only checked songs.  Did you check that checkbox?  If you want iTunes to ignore the songs you unchecked when syncing your iPod, that setting needs to be enabled.  If you change that setting, you'll see the the Sync botton has changed to Apply.  Click Apply.
    That method of unchecking songs works, but it may become annoying over time, as you need to uncheck more and more songs.  If you want advice on some other more convenient ways to make it work, you can post back.

  • My ipod cannot be synced because there is not enough free space to hold all the items in the itunes library(additional 2.35GB required) but it shows 5.85GB free space,  there was no problem until i got a new laptop.

    "The ipod **** cannot be synced becaue there is not enough free space to hold all the items in the itunes library (additional 2.35 GB required)"  but it shows 5.89 GB free. I recently bought a new laptop, and gave away my old one after deleting everything off it, including itunes, the problem started then,

    Hi Terri 4514,
    If you are having a "free space" alert when you try to sync, you may find the following article helpful:
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
    Regards,
    - Brenden

  • How to get my images always order by file name, and not by time of captur, in all the folders in the library?

    How to get my images always order by arquive name, and not by time of captur, in all the folders in the library?
    Sorry for the poor english, but im portugues.
    In the library we can change the order of classification of image by, time of capture, name of file etc... I'm wondering if its possible define to be always by the name of file.
    It ´s possible?
    And i have other question, in print label we have an option to auto rotate to feet in page to have the image using the maximum area in the page (auto rotate, zoom etc), its possible to change the orientation of the rotation to be always in  the other direction?

    The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
    The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
    If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

  • Firefox, all the sudden, will now load the site but will not let me go to a chat area in the website, what has happened?

    I have a site that i am on all the time and have never had a problem at all using it, but the other day all the sudden i could log into the site but when i go to use the chat room feature in the site i get kicked back out to the sign in area. I have used on other comp to make sure not site and have been able use w Internet Explorer... So i am at a loss as to what has happened all the sudden. Please help me...very frustrated w this... Jared

    Original problem I noticed was that regular websites I go to (such as msn) were only partially downloading.  I could see the text on the site but no pictures or videos.  All web surfing was extremely slow.  When I would go to a site such as man I would see another address in the lower left corner for "ads1.msads.net" or "cdn.optimizely.com" that is was trying to connect to. I tried using all three of my browsers (firefox, safari, chrome) and got the same response on all browsers.  After I spent some time researching the issue I decided I probably had a adware/malware problem so I decided to try adwaremedic.com.  I could also not access that site along with thesafemac.com or apple.com.  I was also getting the same response on my other devices (iPhone, iPad, and a mac air).  I could not access any of these sites on any of my devices although I could get to almost any other site although it was very slow.  At that point I decided to unplug the router.  I also did a number of other things before then to try and manually get rid of any adware.  Eventually I got msn back working, apple.com, and the speed was much faster.  But, I still can not access adwaremedic and thesafemac.com.  I could access these on my phone with 3G but not on my wifi.  This is where the problem still stands.  I am sure I still have some adware on my computer and need to find a way to remove it.  I am no techie so the complicated manual fixes are difficult for me to do.

  • Hello After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

    Hello
    After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

    I found this other thread discussing this topic, no fix, I will revert to 9.1.1 from Time Machine and wait for a new update.
    https://discussions.apple.com/thread/3023160?

  • What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75  from an SD card containing 1000  images. Its painful indvidually selecting the images

    What has happened to the iPad 2 finger select and drag technique?
    Since upgrading to iOS7 it does not work?
    I used this all the time to select multple images, approx 75  from an SD card containing 1000  images. Its painful indvidually selecting the images

    What would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
    Please submit your feature request to Apple at this link: http://www.apple.com/feedback

Maybe you are looking for