Wiifii connected but no access
My iPad indicates full connection with my home wifi but I cannot access internet pages. My husband is having no problems on his iPad. Everything is up to date in terms of software. HELP
can't answer those questions at the moment as i am at work. thanks for the respond anyway, will find the answers when i get home a bit later,
Similar Messages
-
I am using Cisco vpn 5.0.07.0440-k9 and Cisco vpn 5.0.07.0290-k9 both version on our windows 8.1 pro laptop.
VPN successfully connected but not access remote network and not getting ping.
But when i am try through wifi then vpn good work.
Please help me as soon as possible.
Thanks
SanjibHello Karthik,
I am using "MTS usb wifi" device and connect vpn through wifi Its working good the same win8.1 pro. But when i am try to connect VPN through LAN/Wired or USB modem (Like: Vodafone,MTS and others) its not working.
I am using Easy vpn on Cisco RV325 router in our office. Same VPN client is very good working in Windows 7 SP1 and Windows XP SP3.
Thanks
Sanjib -
Full bars, 3g connected, but cant access internet
please help me, i'm using TELKOMSEL (indonesian) i have data plans, and it's 4gb, the thing is, as i said Full bars, 3g connected, but cant access internet, i tried to access google using safari, chrome, but still the same message, network not available, those things.... PLEASE HELP ME..
It sounds like a poor data connection. I get the same thing when I try to use AT&T here in my house. It shows 4G and 3 bars but I get little to no data at all. If that is what is happening to you, you can try another carrier if there is one.
Here, I can get LTE at my house and about 10-15Mbps on T-Mobile. Switching carriers can make the difference. -
Equium P200-1IR - Wireless is connected but cannot access the internet
Hi ya,
Need a little help!!
I have just bought an Equium P200-1IR.
I have turned the wi fi on.
I can see my router which is Talk Talk.
I can get the laptop to connect to the router and it says that I am connected,
however I cannot access the internet.
I tried the same process by inserting a wi fi dongle into the USB port
on the laptop and exactly the same happens.
We have other computers in the house that connect to the router and internet
ok using the wireless dongle.
I have plugged a hard wire connection from the laptop to the router and I can
access the internet immediately with no problems, however would love
to use the wireless feature.
Any help really appreciated....Thanks
WaynecDo you use the right channel and right encryption settings?
This should be checked!
It should be able to change the WLan channels in device manager -> WLan card -> Properties -> Advanced tab
But I would also recommend disabling the encryption and password in router settings and to connect to Open Wlan of course this should be done only for testing purposes if the notebook would be able to connect to the open router, then this would mean that you used a wrong password.
How about WLan driver update? Did you update the WLan driver? If not do that! -
Lion 10.7.3: WiFi is connected, but internet access is delayed
This issue may be discussed somewhere else here, and if so I'm sorry for reposting this problem. I have a Macbook Pro bought around June 2011. I just updated the firmware to 10.7.3 Everytime I wake the macbook from sleep, the wifi connects immediatley, dropbox syncs immediatley, but chrome or safari won't load pages until a couple minutes after connecting. I thought it may be a firewall problem, and I allowed connections to Chrome, but that didn't fix the problem. Has anyone else been having issues with internet after the patch?
I suggest you talk to your local college support person. It seems that internet access might be disabled and you need to get them to help you get it enabled.
-
I got an ipad 2 today. Already have an ipad 1 and gateway laptop. Have wireless internet with windstream. I have internet connection on ipad 1 and laptop, but can't connect to internet on ipad2. It says i'm connected, but when accessing Safari, it says not connected to internet. Tried unplugging router and resetting already, still not working. Thanks for the help.
Thank you for your response.
I did try turning off the firewall, and reducing all the security levels to a minimum (under Control Panel>Internet Options). Also, I'm using a direct cable from my m/c to the Airport Extreme. But nothing helps. Due to the usage pattern in my family, using the MacBook for configuring the network is not optimal, hence my struggle to do it on my Windows desktop. But if that is the only way to go I suppose I'll have to.
Subsequent to posting my query, I discovered that Apple had not singled me out, and many others with a Win OS face this problem, too. I would have thought Apple would do a proper job of testing before putting up the Windows version of Airport Utlity on their site.
But thanks again. Much appreciate it. -
I. Am unable to update Apps from iTunes via the apps button messages says unable to connect but can access iTunes directly via iTunes button on iPad
Cheers -
I can't access my itunes store, it says I don't have an internet connection but I do. I tried updating to the newest version of itunes, turned off my firewall, checked to make sure itunes was allowed in my internet options. what else can i do?
Hello bigblue8
Check out the following articles for troubleshooting access to the iTunes Store. The first one will probably get you started enough to get it taken care of. If it does not the follow up article should definitely solve it for you.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
JetPack 4G LTE connects but "no internet access" message
Would appreciate any help.
My JetPack 4G LTE mi-fi connects to the internet (3G or 4G) and shows that my devices are connected to it. However, I cannot get on the internet.
1) I have three different devices - two laptops and a smartphone. All three have the same problem.
2) I have a Sprint Mi-Fi that I use for a different business. All three devices can and do connect to that device and work properly on the internet during the same sessions in which they cannot connect on the Verizon JetPack. So it is not the devices I am trying to connect with.
3) The exact same thing has happened several times over the course of about 4 days and in two cities and two states - all three devices unable to connect via JetPack but connect fine through Sprint Mi-Fi. So it is not location or local network issue.
4) LED display on JetPack, in all instances, show a strong 3G or 4G (depending on where I am) signal and also that all three devices are connected.
5) Message on laptop wireless area shows connection but says "no internet access".
6) Under the wireless status or details, it says (on the list of info): "IPv4 no internet access" and "IPv6 no internet access".
7) I have done a battery pull with no effect.
8) I have done a factory reset (power up, remove cover, press reset button until long green light and short green light) with no effect.
9) After both battery pull and factory reset, I still show connected to 3G, all three devices connected, no internet access, and all three devices then work on the Sprint mi-fi.
10) Symptoms started about 4 days ago and have not changed since - it is not a come-and-go problem. It is not working at any time.
I am hoping to gosh to avoid a long ordeal with tech-support at Verizon. This is a company-issued device, so I could ask my company to take it up with Verizon, but I work remotely and access to the IT department is not that simple either. thought I would see if I am missing something simple. I hope I've given enough info for someone brighter than myself here can spot something I could do.
Thanks in advance for any help.Thank you for your response. I am having trouble logging back into this site to respond (I never created a User ID and don't know my cell phone number as it is a mi-fi and not a cell). I reregisterd for the forums only under a slight ID variation and will continue to do so for this dialog. Thanks very much.
The back of the Jetpack says SSID: "MiFI4620L Jetpack 89B4". I am currently using the device (since the problems began last week) in zip codes 49504 and 49503 - same symptom both places.
Thanks again. -
i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!
Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off. -
my ipod touch is connected to wi-fi but not access safari, youtube, itunes, app store, safari even tells me that is not connected to internet, also had trouble at first because I could not connect to wi-fi, afternoon much as told me that the password was incorrect when it was correct, please tell me as I do to let me access youtube, safari, app store, i tunes...
thanks- Reset the iPOd. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
I used to able to access and listen to my itunes library on my ipad using the remote app but this no longer works. I am connected but sound thru ipad- just controls my library on iMac. Is this because of they want us to use itunes match
That has nothing to do with iTunes match. The Remote app on iPad can control the computer's iTunes but not play content from iTunes on your iPad.
To play for example iTunes imusic on iPad
You need to have Home Sharing On.
Check Settings > Music > Home Sharing (key in your Apple ID & password here, must be the same on computer's iTunes)
Start iPad's Music app, tap the ... More (bottom right), tap Shared.
Choose your iTunes' library and have fun. -
Access Point - AIR-AP1231G-A-K9 - PCs can connect but Apple Macs Cannot ...
Hello,
This is a sort of follow up to a post I made a few days ago. I made changes to my access points and on Windows computers everything works but on Apple products (Macs, iPads, iPhones) the strangest things happen.
(1). About 90% of the time nothing works in that we get NO connection to the Access Point. In the client association logs we see the Mac Address show up but there is a 0.0.0 address where it seems like the device is trying to get an DHCP lease. After a while, the device gets the IPPA address of 169.X.X.X.
(2) After a extended period of time (an hour or more) the Apple device eventually gets an IP address from the network and then is able to successfully connect to the network. However, the connection is short lived and drops after about 30 minutes to an hour.
Is there a problem with the way Apple products encapsulates their network traffic versus Windows or other products?
Again, this not affect any Windows or Andriod based devices (laptops, phones, etc.) They can connect right away and never drop out.
Below is the configuration file for the AP in question, although this is affecting all of our APs:
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname AP-5
enable {Authentication Information}
enable {Authentication Information}
username {Authentication Information}
username {Authentication Information}
ip subnet-zero
ip domain name {Domain here}
no aaa new-model
dot11 ssid (Secure) Staff/Faculty
vlan 70
authentication open
dot11 ssid Public
vlan 60
authentication open
guest-mode
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid (Secure) Staff/Faculty
ssid Public
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
no cdp enable
interface Dot11Radio0.60
encapsulation dot1Q 60 native
no ip route-cache
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.70
encapsulation dot1Q 70
no ip route-cache
no cdp enable
bridge-group 70
bridge-group 70 subscriber-loop-control
no bridge-group 70 source-learning
bridge-group 70 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface FastEthernet0.60
encapsulation dot1Q 60 native
ip address 10.60.255.5 255.255.0.0
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface FastEthernet0.70
encapsulation dot1Q 70
ip address dhcp
no ip route-cache
bridge-group 70
no bridge-group 70 unicast-flooding
bridge-group 70 spanning-disabled
interface BVI1
ip address 10.60.255.5 255.255.0.0
no ip route-cache
ip default-gateway 10.60.0.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
logging snmp-trap emergencies
logging snmp-trap alerts
logging snmp-trap critical
logging snmp-trap errors
logging snmp-trap warnings
bridge 1 route ip
line con 0
transport preferred all
transport output all
line vty 0 4
login local
transport preferred all
transport input all
transport output all
line vty 5 15
login
transport preferred all
transport input all
transport output all
endFor initial configuration you can access AP from the Console port.
Following are the guides you need to look at for configuring you 1600 AP :
Cisco Aironet 1600/2600/3600 Series Access Point Deployment Guide
Getting Started Guide: Cisco Aironet 1600 Series Access Points
Moreover you can check the configuration guide from cisco.com/google, based on the Actual software image your AP is running. Some of the newer IOS for AP you can check here.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
VPN connects but unable to access resources on remote network
HI,
I'm able to ping the ASA interface once the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network.
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http outside
http outside
http inside
http outside
http inside
http outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
no dns-guard
no protocol-enforcement
no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
set connection random-sequence-number disable
set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: endYou need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App -
i rented a movie from itunes. i was on a plane when i tried to access it...but got an error message saying "cannot access itunes store". i had a wifi connection but had to purchase internet to watch the movie on the plane. never had this problem with my ipad and never have it when i download tv shows. what's the deal with movies?
It's not normal, presuming that the movie downloaded completely, but it has come up from time to time. I've not been able to figure out from the various posts why rentals work for most but in some cases insist on a connection to the iTunes store. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to report the issue to the iTunes Store. Perhaps they can provide an explanation, though you may just get canned and rather inapplicable replies about how to rent or download.
Regards.
Maybe you are looking for
-
Ipod not recognised in ITunes. My solution (try this - worked for me!)
Hello. i had IPOD 30GB vid for Xmas and have spent 3 days surfing through info trying to find out why itunes did not recognise it! I could see it in my computer but not itunes. I tried everything - and I mean EVERYTHING. I reinstalled, rebooted, rest
-
NO GR required for non stock PR/PO
My client has a concern with their business users selecting item category and account category during creation of a non-stock PR. The solution that the client prefers is to configure one item category and one account assignment category combination p
-
Why do videos stop before reaching the end
Videos on You Tube have suddenly started to freeze after playing for 10-12 seconds. Is there a particular setting I should alter to correct this? Peter
-
Can you run continuous queries via Java Extend
I currently am access a Coherence cluster via a Java Extend proxy. All seems fine but I do not see any events coming back from a CQ. I do when using a simple cache listener though. Does Extend support CQ's or am I doing something stupid? The code is
-
i need to restore my daughter's iPhone because she forgot her password, but it says I can't manually restore backup until I turn off find my iphone on her phone