Wiki does not respond after a few days

Hi,
I have set up the wiki server on a newly bought mac mini (winter 2011) running latest version of Snow Leopard. Authentication is performed through remote Open Directory and Active Directory servers. No third party software installed.
Everything works just fine for a few days (1-2 weeks), but then the server starts to respond VERY slowly. This looked like a memory problem to me (busy processor, low ram, etc), but a quick look at the Activity Monitor shows me nothing's wrong there.
I can reboot and it will go on for another few days, but I wonder if this does not hide another problem.
I'm pretty sure this is a wiki related issue, because we have identical machines, but the ones without web services run smoothly without need for an occasional reboot. Also, I did many fresh install, and the problem always came back.
Anyone has experienced something similar?

This is quite a common problem. The usual cause is inadvertent use of the "mute speech" command via the Trackpad Commander.
To toggle VO speech on and off using the Trackpad, tap twice with three fingers simultaneously.
Otherwise, you can summon up the VoiceOver command menu using VO-H-H, type "PAR" (French for "SPEech" and press Return.
For the Zoom problem, open System Preferences —> Universal Access and make sure you tick the "Zoom follows the keyboard focus" checkbox.
You might also want to experiment with the Screen Image radio buttons lower down the window:
• Continuously with pointer (some people find this makes them seasick);
• Only when the pointer reaches an edge (usually preferred); and
• So the pointer is at or near the center of the image (some people like this).
Have you thought of looking at the French language website http://cecimac.org/ ? It's full of articles and tips for beginners, all in French. There is also a very lively e-mail Forum for Francophone VoiceOver users.
Good luck,
Archie

Similar Messages

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Satellite A65 freezes and does not respond after adding of RAM

Gents,
My laptop Satellite A-65 has been upgrade from 512 MB RAM to 1024 RAM. It recognized additional memory without any problem (as it should be according to manual).
But unfortunately after 1 day it begun suddenly stops, pictures on screen freezes, laptop does not respond at all - only reset (pushing and holding power button) can help. some times laptop is able to work 2 or 3 hours, but then again stops.
Memory place cover is rather hot, fan very often work uninterruptibly. so i can't decide whether problem is in new memory card or not enough cooling or might be in changing of BIOS version (or BIOS setttings) and might be memory becomes full and does not clear itself properly (last remark was found on some forumes).
Experts, help to find exact reason especcially if u had similar problem.

Hi
Im not expert but I would recommend removing the new memory module and let run the notebook only with the standard memory module.
If the notebook will not hang and will not freeze then its a very clear case for me.
Either the second module is not compatible or faulty.
In my opinion you should use branded modules like Kingston for example. The quality is much better as a no-name module.
Additional use the modules recommend by Toshiba

Finder DOES NOT Respond after Restart, Or Shut Down

I am running an iMac G5 on OS X 10.5.4, After a shut down or restart, Finder does not respond, The only thing on my desktop is My HD and Chosen wallpaper. I can launch Apps from the Dock, but not folders from the dock, Not Downloads folder, Documents Folder, Just Applications, which is weird because they are in finder too! Mail starts up when I log in so I can access Mail, I use Firefox, When I click on it in the dock it starts up no problem, after a while Finder does respond, I get all my icons back on my desktop and can access folders. I have Cleared System Cache, Browsers Cache, I ran Disk Utility and REPAIRED Disk permissions. No help. Short of RE-Installing Mac OS X, What Should I do? Is this happening to anyone else??

I am having the same problem!
I have tried the following: deleting the com.apple.finder.plist, deleting the com.apple.sidebar.plist, I have reinstalled the 10.5.5combo update, I have deleted all of my photoshop preferences (possible solution from another thread), and it is still doing it!

Why are my notes disappearing after a few days?

I have an I-Phone 5, purchased last March. I have upgraded to IOS 7 when it first came out, no problem. I have been making lists of my packing boxes and they keep disappearing after a few days. I am wondering if sync is wiping them out. Anyone else having a problem with the notes feature?

Yahoo is holding Notes as hostage. Check your Yahoo account settings.

Canon LiDE 100 does not respond after wake from sleep

I have a Canon LiDE 100 flatbed scanner. I constantly put my iMac to sleep and only ever shut it down once every few weeks.
When the computer wakes from sleep the scanner does not respond. Image Capture lists the scanner in the device list but reports the following error;
"An error occurred whilst communicating with the scanner"
I have to unplug the USB cable and plug it back in for it to work (or restart the computer, both always work).
Since I only moved to the Macintosh in July I have no idea how to uninstall drivers to give myself a fresh start and the scanner does not come with an uninstall utility.
Any suggestions on how to fix this little problem?
Thanks.

I am going to respond to my self and say I am nuts.
Canon does not seem to have any uninstaller for this scanner on their site:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=17104
Which is rather odd since they have installers. this is different from most of their other older scanners. But if you just plugged in our scanner and things worked in OSX, which it should have, then you should be OK.
However I can confirm that others see this issue (like my dad) and here is the official Canon response to the issue:
+Dear XXXX:+
+In some cases, coming out of sleep mode may not properly reinitialize+
+the USB bus on Macintosh Operating Systems. Unfortunately, the only+
+work around when this happens is to restart the computer.+
Of course this in not exactly true as logging out and back in fixes it.

User does not respond-after reading countless post i still don't understand

hi. i have been reading post on the 'user does not respond' and i still do not understand. i don't know how to check my ports and how to change them. all of them have been pretty technical. please, is there anyone that can explain it in layman's term?
2006-09-17 07:57:14 -0400: sentosa225 did not respond.
Tried to send UDP SIP "invite" to the following IP addresses and ports:
218.111.157.122:5060, 169.254.186.77:5060, 192.168.1.8:5060
that is what i get. i read and saw that 5060 is the correct port, is it?
can anyone please help me. there seem to be no end to this.

Hi Mark,I think I'll have to brush up my english first of all.Or think about how to put it,so that you can understand my abstract question.I tried to find a site of Adobe support in Dutch because that may be easier for me and for others to understand,because everything computer related is so new to me,that my questions are not very clear most of the time.But I can't find support in my language,so I will try and think a bit more how to answer your questions to my question.Bye.Marion

Premiere cs4 Not Responding after a few mins use

Hello,
I have been using premiere cs4 to make stop motion videos for awhile on this computer and have started having problems with the software.
Everytime I try to use it after a few mins sometimes 5 sometime less it goes white and says not responding resulting in having to close the program. Im starting to get late on deadlines and this is becoming a problem. Ive resorted to doing one step saving then having to close the program and repeat the process.
My system...
i5 750 OCed to 3.5ghz
8gb 1600mhz ram
I know its not the best but untill now its done this work for me fine. I am using stills at a res of 1920x1080 at 150 dpi and there are thousands of stills but again This is a new problem and I have been doing this for awhile with no issues.
Any ideas would be greatly appreciated.

Hello,
Thanks for the quick reply.
I did attempt a small batch sized as you stated but it did not help. It doesnt seem to matter what I'm working on within the program I could have no content and just click different menus and within mins the system will stop responding. That being said the final video must be in 1080p.
Here are the the items requested in the FAQ given.
i5 750 OCed to 3.5ghz also tried stock clock settings.
8gbs 1600mhz ram
2 hhd set up as follows
500gb 7400rpm hdd, program Pagefile, Media cache
1tb 7400rpm hdd, media, project file, previews
4gb virtual page file
win 7 fully updated
premiere pro fully updated
No Audio used
Ive tried various file sizes and settings to match those files all with same result.
As I state above the actual conent size, type and quantity doesnt seem to matter 3-5 mins in and it just stops responding.
Things ive tried so far.
I did extensive mem tests on my ram with no issues
reverted my over clock to stock settings
reinstall the software several times.
Also of note my ram never goes over 50% usage so Im not using all my ram.
I hope this helps i tried to include everything mentioned on the listed FAQ

Lenovo T-400 series thinkpad. Mouse on the laptop does not respond after coming out of hibernation.

I have just received the new T-400 series Laptop. In few days I have observed twice that when the laptop comes out of hibernation the mouse stops responding. On both occasions I was forced to restart it.
Has anyone else experienced the same and most importantly can anyone let me know how to fix it?
Thanks

why did you mark this as an answer? you didn't provide any solution to this. the link you posted clearly states that the keyboard is compatible here:
http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/32427/session/L2F2LzEvdGltZS8xMzU1MjY2Nzk0L3NpZC82VXlYWHZkbA%3D%3D
futhermore logitech themselves state the following:
NOTE: Logitech mice and keyboards are Human Interface Devices (HID). HID drivers are native to modern Windows operating systems, enabling basic functionality without the need for other software. To use enhanced features,
such as programming keys and buttons, additional software may be required. See the product's Support page > Downloads tab for software availability.
the keyboard should work regardless of any additional drivers from logitech. that being said, i have installed all the latest drivers and the keyboard is still unresponsive when it comes back from standby. this is obviously some sort of an OS
problem.

My ipad 2 does not respond after upgrade to ios 8

I tried to upgrade my Ipad 2 to ios 8, which has been said to be copatible. During the upgrade process the Apple logo apeared on the black screen and has stayed there everysince. The ipad does not react on a hard reset and is not identified on connecting to a computer, Apple or PC. Screen stays on untill the battery has been emptied. Apple Store in Munich could not help me and told me guarantee has run out, there is nothing they can do, than to offer me a new Ipad 2 for 200 €. I can not understand, that an upgrade can "destroy" my property.

I had a problem connecting to my exchange server. It turns out that Exchange will only allow ten devices to be partnered to your account at a time. Apparently I have a problem with new phone.(Attending the 12 step program now for treatment.) I had this message in my inbox when I logged in to check the server. "You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships." I followed the instructions and delted all the old accounts...problem solved.

Settings not retained after a few days of non-use

If I don't use the iPod for a few days, when I turn it on I see the menu for selecting my language. Then I also have to reset my contrast and main menu options, etc. Essentially, my settings are not being retained.
I can understand the appearance of the Apple logo as the iPod restarts, but I shouldn't have to keep recreating my settings. It didn't used to do this.

Hi Michael
Have you had any answers to this as i'm expierencing the same problem.
If my g3 ipod has not been used for a few days,when i switch it on the contrast as at factory setting & the language option screen is displayed.
Again like yourself i did not used to have this problem
i'll keep checking this site for updates however if you have managed to resolve this i would be greatful if you could advise
Regards
Ed

Report Server does not respond after certain idle time

We have an oracle 10g application server on solaris 10.
The report server has the defaul settings for time out , callback etc..
After the report server stays idle for 2 or 3 hours and the first report that comes after that takes around 8 to 10 minutes to generate. The report server engine does not seem to be getting active immediately.
Is there any parameter I can change so that the reports do not get effected.
Thanks

I have put the idle time out at 300 minutes and the max idle time as 350 minutes. But that does not seem to have helped.And also I have min engine as 1 , max as 10.
Even with the above settings , When the report engine is idle after 30 minutes the 1st report to generate after 30 minutes takes 9 minutes.
please let me know if there are any other parameters I need to change.
thanks

Any fixes for system pref not responding after a few seconds in 10.7.4?

I'm openning System Preferences both from the dock and by clicking the black apple, it opens and stops responding after about 5 second and the beach ball of death appears. Tried restarting the unit, safe boot, verify and repair disk and permissions. Always the same issue. HELP!

Running out of "moving parts"...
Two (last?) things to try.
1. Instead of launching system preferences through the menu launch it explicitly by double clicking the app in /Applications.
2. Temporarily rename ~/Library/Preferences/ByHost. For example, stick a 'x' on the end of it ("ByHostx"). I don't want you to delete ByHost. Only temporarily rename it. This is the last possible directly-related system preference data that could have a problem.
If it still hangs after this I am not exactly sure what to pursue next. It can't be a login item or launch agent since these are suppressed when booting in safe mode. You deleted the system preference cache and plist. ByHost is the only thing explicitly related in you home directory.
One other thing would be to open Console for all messages and see if anything gets displayed when launching system preferences.

8.1SP2 Webserver does not respond after a while

Hello,
I've had this happen several times. Nothing in the logs shows anything
strange. It logs the HTTP requests coming in, but does not return a
response.
The process is still running, and the applications can connect to the
port, but they hang on waiting for a response.
My setup:
Redhat Linux 9 w/ Weblogic Server 8.1 SP2
I'm trying to connect to the /console app, but have also tried to access
the / directory to make sure it wasn't just the console that was hung.
Thanks

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Wiki does not respond after a few days

Similar Messages

Maybe you are looking for