Wiki is not avaible this the last update for os x server

Hello,
yesterday I installed the last 5 updates for our os x server.
After the reboot, the wiki and blogs where not longer aviable.
Has anybody an idea what could't be happend?
On the wiki page i get the Error 503.
Here is an part of the errorlog:
[Fri Apr 04 19:00:34 2008] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:8087 (127.0.0.1) failed
[Fri Apr 04 19:00:34 2008] [error] approxy_connectbackend disabling worker for (127.0.0.1)
[Fri Apr 04 19:00:35 2008] [error] proxy: HTTP: disabled connection for (127.0.0.1)
[Fri Apr 04 19:00:35 2008] [error] proxy: HTTP: disabled connection for (127.0.0.1)
[Fri Apr 04 19:00:36 2008] [error] proxy: HTTP: disabled connection for (127.0.0.1)
[Fri Apr 04 19:00:36 2008] [error] proxy: HTTP: disabled connection for (127.0.0.1)
[Fri Apr 04 19:00:38 2008] [error] proxy: HTTP: disabled connection for (127.0.0.1)
[Fri Apr 04 19:03:10 2008] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:8087 (127.0.0.1) failed
[Fri Apr 04 19:03:10 2008] [error] approxy_connectbackend disabling worker for (127.0.0.1)
[Fri Apr 04 19:03:11 2008] [error] proxy: HTTP: disabled connection for (127.0.0.1)
Message was edited by: kai23

I have a similar but different problem.I have not been able to get the wiki going at all. I also get the 503 error with the same error messages but the whitelist has never been created in the WikiServer App Support folder.
Maybe because I have configured virtual servers manually, the Admin Server will not let me save changes to the sites details - throwing exceptions. But config for wiki Proxypass rules seems to be in /etc/apache2/httpd_groups.conf which contains:
<IfModule mod_proxy.c>
<Location /groups>
ProxyPassReverse http://127.0.0.1:8087/groups
ProxyPass http://127.0.0.1:8087/groups retry=5
# Turn off Keep-Alive for Safari (workaround for ##4876179)
BrowserMatch WebKit SafariUploadWorkaround
BrowserMatch WebKit proxy-nokeepalive=1
RequestHeader set Connection close env=SafariUploadWorkaround
</Location>
</IfModule>
and I have included this manually in the virtual server config file (see below). Websites are working fine by the way.
And, the only change I have made to httpd.conf is to set the user that apache runs as to httpd.
Virtual Server config is (Ip number xx'ed out and domain name changed):
<VirtualHost xx.xxx.xxx.xx:80>
ServerName www.example.com
ServerAlias example.com
ServerAdmin [email protected]
DocumentRoot "/Users/httpd/Sites/example.com/html"
DirectoryIndex index.html index.php index.cgi
CustomLog "/var/log/apache2/access_log" "%h %l %u %t \"%r\" %>s %b"
ErrorLog "/var/log/apache2/error_log"
ErrorDocument 404 errordocument.html
<Directory "/Users/httpd/Sites/example.com">
Options ExecCGI FollowSymLinks
AllowOverride AuthConfig
</Directory>
Include /etc/apache2/httpd_users.conf
Include /etc/apache2/httpd_groups.conf
</VirtualHost>
Can anyone help?

Similar Messages

  • I am running OS X version 10.7.5 on a Macbook Air.  I read in one thread where someone had an update that was higher than 10.7.5 but when I ask for updates, none are available. Is this the last update for OS X?

    I am running OS X version 10.7.5 on a Macbook Air.  I read in one thread where someone had an update that was higher than 10.7.5 but when I ask for updates, none are available. Is this the last update for OS X?

    Niel, thanks for your response.  I have been very wary of downloading Mavericks on this machine.  I don't feel it has the power to run it and I'm afraid it was slow it down terribly.  It was bought in late 2008.  It's fine for my purposes at this time…just holding on until I buy a new one.  I have the same problem others have with autofill not working, so I was trying to see if an update would help that situation.  Grace

  • Why MLB.TV is not appearing after the last update?

    why MLB.TV is not appearing after the last update?

    Make sure the store is set to the US.. Also restart the ATV.

  • 7.8 - The last update for current windows phones?

    As WP8 has been announced, will 7.8 be the last update for the current generation of windows phone?
    It is upsetting because it hasn't even been a year since I bought my Sabre and now it won't be developed anymore?
    **bleep** the WP8 start screen! 

    It has been mentioned that it will have the start screen of WP8. It seems like a consolation for not giving the WP8 update. I understand that the hardware won't support WP8 but it is also natural that their focus will shift to WP8 and which means that there won't be further updates for the current gen.
    I'm not upset over something a petty thing like mobile phone but it is sad that the continuous exciting development of WP7 will now stop. It hasn't even been a year since I bought this phone and when I bought this phone, I expected it to be one of nokia's leading handsets competing with androids and iOS. That is why I spent my money while compromising many basic features which I expected to get in further updates.
    Nokia is simply asking to BUY new WP8 phones and those who have bought WP7 will obviously feel cheated.

  • Is IOs 6.1.3 going to be the last updated for ipone 4 or there is more comming?

    Is IOs 6.1.3 going to be the last updated for ipone 4 or there is more comming?

    iPhone 4 or later. iPhone 4 will have limited features.
    (No AirDrop, no paralax, etc...)

  • HT200189 Why the VPN update for OS X server won't install?

    Hello
    Why the VPN update for OS X server won't install. It says "VPN update for OS X server can't be installed on the disk. This volume does not meet the requirements for this update" Any help would be appreciated. Thanks

    Is OS X Server setup on your MBP as an actual Server running the Services or are you just using it so you can remotely manage another Mac running OS X Server services?
    VPN Update for Mavericks Server
    Note: the update will only install if you have already launched Server app and used it to set up services.

  • Airplay does not work after the last update on iMac

    Today I have instaled the last updates on my iMac and the AirPlay mirroring on my AppleTV does not work anymore. I can hear the sound but the video doesn't work. Somebody knows how to fix this? Really dissapponted with Apple products.

    Try resettng the SMC and PRAM each 2-3 times, then post back.
    Instructions are in Intel iMac SMC and PRAM resets

  • Why the video calls under the Skype are still not fixed in the last update?

    I am deeply dissapointed with the last update to the operating system of my new (2013) MacBook Air. The video calls didn't work, but I have followed one of the remedy on the net and made it working. After the update the problem returned. This problem is known for couple of months and the Apple doesn't care. Why ??? Can you please inform me and everybody else when you fix it, untill then I would not update OS. Thank you.

    Download and install this latest Combo Update.
    http://support.apple.com/kb/DL1676
    Best.

  • HT204306 My Ipad does not reboot after the last update, I tried the reset mode and that didnot work . All I get when turned on is the apple icon. Help Please?

    I have and Ipad  Model A1458 and serial number DMPJVX72F183  I did the last update 8.1 and since then I can not get it to work. The apple icon comes on then fades and then comes back then fades , this continues until I turn it off or the battery run died. I tried the reset but that did not work. Any suggestion?

    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Bluetooth (handsfree) not connecting since the last update

    Hi everyone, the last update has totally ruined my connection to the car. I have a Mazda CX9 , my phone and music connect and music is fine to play but to make and answer calls nothing comes through the car. This is so annoying because now I don't have handsfree!!    
    Is anyone experiencing the same problem. I have reset all network settings, turned phone on and off still nothing.
    HELP!

    Yes, contact Apple Support about that. Since your phone is out of warranty, you'll have to pay the Out-Of-Warranty-Service fee, if you want to get your phone replaced by a working device.
    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
    copied from Service Answer Center - iPhone

  • Since the last update for my Iphone 4s i dont get text messages when connected to wifi. my wife is getting them. Imessage is switched off on both phones.

    since the 6. version update. of my Iphone 4s My wife was getting my text messages. I found the problem was caused by Imessage when connected to Wifi. I deactivated Imessage on both phones to solve the problem. I now have updated my Iphone to 6.1.1 and i dont get text messages anymore. I have Imessage deactivated on my phone but my wife is getting my text messages again. my wifes phone was not updated to 6.1.1 because the last update lost all her contacts from her phone and we had to but them back in one by one from the outlook list. Her contact are listed in outlook on a seperate list to mine but we can only get my contacts download to her phone. We use the same laptop to sysc phones.
    My Iphone does not download photos to My Pictures anymore. I have to copy them across to a folder. I cant find where it backs them up to.
    I have lost all confidence in Apple now as i was forced to update to 6.1.1 because of 3G reception issues and not reciving calls and now back to spending several hours trying to fix my phone to recieve a basic text message.

    Are you and your wife sharing apple id?
    If you are that is the reason why she is seeing your imessage.
    On both phone go to settings - message - send&receive - make sure the cell is the default.
    You will have to uncheck or remove the apple id.

  • After the last update for OSX 10.9.5, I get messages stating that I need to re-install the update because it did not install properly - How do I do this

    On September 24, I got a message from the App Store saying there was an update of the Operating System on my MacBookPro laptop - OS X 10.9.5 - once I updated it, I got a message saying that there was an error in the update and that it did not install properly and that I should re-install the update.  I have no idea how to do this.  Can anyone help me?

    You can manually download the Combo update if in doubt of the integrity of the OS 10.9.5
    install on top of what you have, backups are always a good idea.
    OS X Mavericks 10.9.5 Update (Combo)

  • Airplay is not working after the last updates

    Hello,
    I've updated iphone, ipad air and ipad 4 to ios 8 and apple tv 3 (1469) to newest version (7?).
    After that it's absolutely a disaster.
    Mostly I using the apple tv for music streaming, sometimes for mirroring...
    But it can not be found, I can not select the apple tv on ios devices because it is not there!
    The airplay symbol comes after swiping the menu up after approx. 1 sec and theres only the Denon Cocoon to selcet but not the apple tv.
    The same on the iMac I can not choose the apple tv directly from the top bar for mirroring and not in itunes for music streaming (but the Cocoon is there), and this altough the imac is also via ethernet on the same router, no wlan connection is required for streaming in this case.
    The apple tv is connected by ethernet to the router and I see in the router menu that the apple tv is connected to the internet.
    I did a hard-reset but this did not help.
    I've tried also with blutooth on or off and rebootet the ios devices.
    From time to time one of the different devices shows the apple tv...this morning for example after I turn blutooth on at the iphone and waited 30 seconds, it was there and it worked - sometimes on device shows the apple tv without blutooth and if I connect, nothing happen and the music starts on the device itself.
    If I start the apple tv via remote, everything is fine, I find it at all devices including the imac!
    If I managed it to start the music streaming with an device (as written, from time to time it works) the apple tv is avaible on all other devices.
    For me theres no question that theres a bug in the new apple-tv software (because I can not find it on the imac as well, otherwise I would think the bug is in ios 8).
    It is not possible to wake up the apple tv via airplay from sleep mode, I think that is the problem - if I turn off the sleep mode everything is fine.

    the1sen wrote:
    There appear to be many others with the same issue on here.
    Nothing unusual in that after an update.
    Generally speaking it's fairly obvious from the volume of such posts if there's a problem with an update or not. On this occasion I'm not seeing the sort of numbers that indicate a widespread issue.

  • Isight camera not working after the last update

    After reboot of the last OS update
    Isight camera not working...
    i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
    just to give you a recap of what i've tried so far:
    * restarting (obviously)
    * resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
    * just shutting down my computer and taking the battery out for several hours
    any Help pls
    because i mast to use it as soon as possible in a conference

    *A few suggestions.........*
    Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
    my isight camera is not working-not recognized with photo booth or ichat
    To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

  • After instaling the last update for Beta 9, Firefox will not open

    I just installed the last secutry update for FF V.9. The update closaed FF as it should but now FF will not open! I tryed rebooting my computer but that didn't help.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    You can try to reset the preferences if that didn't work.
    See also:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.com/kb/Firefox+crashes
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Maybe you are looking for

  • Free game issue

    I am new to Apple and thought I would try a free game App but it is requesting me to change my Apple id (I do not want to change it) and it will not allow me to type or cancel the box or the game.  Can anyony assist me please.

  • Acrobat 9 crashes on OCR

    I've been trying to convert a batch of large PDF files to PDF searchable files by using the OCR of Acrobat. In the middle of a batch, a large (1000+ page) document crashes acrobat. I have narrowed it down to this image: http://img90.imageshack.us/img

  • Error in fax out

    Hi All, While processing purchase orders, the fax output is going into following error log. SX_OBJECT_CONVERT_OTF_PRT conversion from OTF to PS: termination in  C_RSPO_PROCESS DIALOG, return code  1 SX_FORMAT_CONVERT conversion from OTF to PS: termin

  • Pro menu not showing, but valid registration key shows

    I have been using QuickTime Pro on this computer for over a year, but I haven't used it in a couple of months. As of yesterday and today, only Player menu items show. No Pro tools show. My first thought was that my registration key must've been someh

  • Swf and remote sandbox

    Hi, I was trying to access remote javaScript through an AIR applications, I tried the way explained here It works fine. But when I use swf as content instead of html in app.xml, it does not work. Does anyone know how to get it work when you have .swf