Wiki service - client only sees wiki is starting up

My wiki service used to work without problems. This morning clients are seeing only a web page that says "wiki is starting up". That page refreshes every few seconds in Safari.
On the server, the service is tyrned to on and everyting seems OK. I restarted the service a few times, as well as the computer itself, but I am getting the same results.
Not sure what to do to restore the service.
Thanks for any tips.

Not resolved, as I keep gerring errors.
I had 2 clones from this drive, one from last night, and one from about 10 days ago.
I tried to moved the Wiki folder from each clone to the current server drive. I essentially get the same results after restarting server. Client see the message wiki is starting up.
I quit server and trashed the contents of the folder Wiki. After restarting the computer and server, I have a clean wiki service runnning.
Is there any way to get the wiki pages back from the wiki folder on my clones. Looking inside those folders, it did not seem obvious I could identify my pages.
Thanks for your help.

Similar Messages

Wiki service option only shows "none"

Hi i have wiki service turned on for our web service but in WG manager the only option is "none" in groups basic. thanks

greenvespa wrote:
I've got the same problem, but I don't want to reinstall Server App because i don't want to lose users (open directory) and mails. I've got "Error reading settings" on Profile Manager and Wiki (Calendar and Messages are OK).
Any others ideas to solve this problem without reinstalling?
The saving of users may not be a problem. All my settings came back using the procedure described by basilmir for me (don't know what will happen for you, but assume the same). Don't know specific procedure to save your settings but assume that a full backup would be the 100% sure way to insure this.
My point though is that the procedure given doesn't fix the problem. I am contacting Apple Support on this. It is possible that I had this problem in a previous install and upgrading did not cure, though did not notice Wiki errors. As stated, I do not use Wiki Server functionality and it is turned off, yet the errors recur. Several other threads exist on this type of issue and it affects several other Server settings as you describe (with Profile Manager) whether enabled or not and it occurs in previous versions too. You would think that Apple would have weighed in on this by now. To date, have seen no KB or official support threads, have you?

Starting wiki service breaks domain forwarding

I have two domains hosted at GoDaddy that are forwarded to my server with masking (one is http://www.internationalworkshops.org). One of my other users requested wiki service, so I turned that on, and now the forwarded domains come up as blank pages. When I view the page source, all appears well (it's an HTML 4.01 document using frames to show the content on my server), but only a blank page comes up in my browser. If I turn off wiki service, then the domain forwarding works properly again.
Any ideas on how I can get both services to work at the same time?

Aiiiii.
took all my forwarders off and then decided to check my Spam filter and viola the email is in my Spam box.
got to simplify things over here and getting a new domain host would be a nice start.
sorry for the long post.

Confused about wiki pages and groups (i'm new to wiki services).

we set up wiki services on our newly upgraded 10.5 server, but there is something that i can't seem to understand.
it seems that the only way to create a new wiki is to create a new group. i don't quite get how you can have some members of one group and some members of another, access the same wiki page.
this will get very messy for our company because we want to set up wikis for the multiple projects we have going. this means that the amount of groups will escalate rapidly and surely will cause problems and confusion.
we currently have 7 groups created on the WGM and my company is about 50 employees.
each group currently has their own wiki which leads me to my original problem/question.
if we create a new wiki, that creates a new group, and we don't want that.
i could totally be missing something here as i mentioned i am new to the wiki services and 10.5 server in general.
if you need more information from me, let me know.
thanks in advance.

anyone?? bueller...? bueller...?
i can't seem to find any information about this. i even looked here http://www.apple.com/server/macosx/resources/ in the wiki documentation and didn't find anything.
perhaps i wasn't entirely clear in my initial post.
say i want people in the accounting and marketing group to share a wiki page. the only way i know how to do this, is to create a new group (let's call it wiki_group) and to have members of both accounting and marketing be members of wiki_group.
as i mentioned in my initial post, this is going to be a huge problem.
the only work-around that i can think of is to have the accounting group and marketing group be members of both. this is not acceptable due to security and resource sharing.
how can i create wikis without having to create a new group, and to have members of other groups view and edit other wikis?

Unable to upload files to wiki service

Hi, I tried today to enable the wiki service for the first time. Everything seemed ok—it turns on, I can log in, I can create wikis and files. However, when i attempt to upload a file the spinner continues forever and the file does not upload. Looking at /Library/Server/Wiki/Logs/coreclient.log shows an error (sorry I have to key this in, not copy/paste):
InvalidAuthenticityToken exception for request - CSRF token may be missing
This is followed by a bunch of debug output from Ruby, and then this:
ActionController::InvalidAuthenticityToken (ActionController::InvalidAuthenticityToken):
app/controllers/application_controller.rb:685: in `handle_unverified_request'
I didn't find any other references to these errors in some searches I did. Does anyone have an idea what is going wrong?
My server is 10.8.3, latest Server.app
Thanks,
Brian

Hi,
Firstly, please check Event Viewer and it should identify what's the reason cause IE crash.
Secondly, have you tried other browser for test to upload file?
Roger Lu
TechNet Community Support

How to keep Lion Server wiki service running in bootcamp windows?

I know this is a stupid question, but ...
I used to run mac mini server as the wiki & file sharing server within my team, and use vmware to load the win7 on the bootcamp partition to do some jobs which need M$ visual studio.
Now I have some new things to do with windows phone7, but unlike other simulators, windows phone7 is extremely slow if I run it in the vmware. I have to boot bootcamp and run the emulator natively, meanwhile I don't want to stop the Lion server especially the wiki services.
So the question comes:
Is there a way to migrate the existing Lion server contents to a Windows? Perhaps I need to setup windows+apache+mysql+php? It seems not a easy way.
Or anyway to boot the existing Lion partition in a windows virtual machine? Some tips? Many thanks!

Snow Leopard did the same if you used the GUI. I responded to you in your other thread. You can also simply use a different Apache. Use Macports to install your own apache, which can be managed via command line or webmin. Thus, the apple one deals with Apple stuff, and, yours deals with everything else.

Getting started with a web service client

I am trying to figure out how to create a web service client using NetBeans 6. I started with a class library for testing in Fitnesse. I've been using tutorials and Googling around but now I am stuck. I have added the JAX-RPC library; I am able to add a web service client to the project using the IDE; and I can view all of the objects and methods under "Web Service References" and compile the code; however, at runtime I get the error:
java.lang.NoClassDefFoundError: javax/xml/rpc/Service
at java.lang.ClassLoader.defineClass1(Native Method) ... etc.
What am I missing?
P.S., when I try to test any web service in the IDE I get an error like this:
InvocationTargetException org.netbeans.modules.websvc.registry.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:540) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.invokeMethod(TestWebServiceMethodDlg.java:466) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.access$500(TestWebServiceMethodDlg.java:92) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg$3.run(TestWebServiceMethodDlg.java:409) org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:561) org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:986) Next Exception Layer null sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:597) org.netbeans.modules.websvc.registry.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:534) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.invokeMethod(TestWebServiceMethodDlg.java:466) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.access$500(TestWebServiceMethodDlg.java:92) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg$3.run(TestWebServiceMethodDlg.java:409) org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:561) org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:986) Next Exception Layer Could not initialize class com.sun.xml.internal.messaging.saaj.soap.SAAJMetaFactoryImpl sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) java.lang.reflect.Constructor.newInstance(Constructor.java:513) java.lang.Class.newInstance0(Class.java:355) java.lang.Class.newInstance(Class.java:308) javax.xml.soap.FactoryFinder.newInstance(FactoryFinder.java:38) javax.xml.soap.FactoryFinder.find(FactoryFinder.java:165) javax.xml.soap.SAAJMetaFactory.getInstance(SAAJMetaFactory.java:61) javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:127) javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:93) com.sun.xml.rpc.soap.message.SOAPMessageContext.getMessageFactory(SOAPMessageContext.java:200) com.sun.xml.rpc.soap.message.SOAPMessageContext.createMessage(SOAPMessageContext.java:131) com.sun.xml.rpc.client.StreamingSenderState. (StreamingSenderState.java:30) com.sun.xml.rpc.client.StubBase._start(StubBase.java:92) webservice.CountCheatServiceSoap_Stub.letterSolutionsMin(CountCheatServiceSoap_Stub.java:54) webservice.CountCheatServiceClient.countcheatservicesoapLetterSolutionsMin(CountCheatServiceClient.java:26) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:597) org.netbeans.modules.websvc.registry.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:534) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.invokeMethod(TestWebServiceMethodDlg.java:466) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.access$500(TestWebServiceMethodDlg.java:92) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg$3.run(TestWebServiceMethodDlg.java:409) org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:561) org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:986)
Edited by: pjpark on Dec 26, 2007 1:33 PM

I was able to get the web service client to work in Windows XP by following the same steps I was using in Windows 2003 x64. I did not need to add anything to the Class Path in XP to run the test application and execute a web service method; however, NetBeans would not give me the option to test the web method from the IDE.
I will try re-installing java and netbeans on the 64 bit server and see if that helps.

4.1 stalled at wiki services

updated from 10.10.2 and server 4.0.3 to 10.10.3 and server 4.1
When launching server app, it updates profile manager, software updates,etc but then hangs at calendar service before finally stopping at "Updating Wiki Service"
Any suggestions?

H,
I checked the "view source" of the web page and there is source. In the view source there were several .css files listed:
<link rel="stylesheet" href="/i/css/apex_4_1.min.css" type="text/css" />

<link rel="stylesheet" href="/i/libraries/jquery-ui/1.8.14/themes/base/jquery-ui.min.css" type="text/css" />
<link rel="stylesheet" href="/i/css/apex_builder_4_1.min.css" type="text/css" />



I then checked on the server for these files and found them:
[oracle@gusosb001 images]$ find . -name apex*.css -print
./css/apex_ie_4_1.min.css
./css/apex_builder_4_1.min.css
./css/apex_builder_ie6_4_1.min.css
./css/apex_builder_hc_4_1.min.css
./css/apex_builder_hc_4_1.css
./css/apex_builder_ie7_4_1.min.css
./css/apex_builder_4_1.css
./css/apex_4_1.min.css
./css/apex_builder_ie6_4_1.css
./css/apex_jqm_4_1.css
./css/apex_builder_ie_4_1.css
./css/apex_builder_ie_4_1.min.css
./css/apex_4_1.css
./css/apex_ie_4_1.css
./css/apex_builder_ie7_4_1.css
[oracle@gusosb001 images]$ pwd
/u01/app/oracle/product/11.2.0/dbhome_1/apex/images
Any other thoughts.
thanks,
steve

Replacing/Restoring Wiki data - seems to break Wiki

I ran 10.5 Server for a few days with users making posts on wiki and blogs. Then, I had to rebuild the Server (erase disk, reload Leopard Server, build new Directory). I had backed up the Collaboration folder to an external disk, that contained all of the users wiki/blog entries.
Now, when I replace the new Collaboration folder with the backed up one, the wiki no longer works.
Any ideas what I am doing wrong?
Thanks!

Groups have the feature that if a deleted group's name is reused, the old group's data is not. What happens is that the wiki server checks the GUID of the group against the value of "GUID" stored in /Library/Collaboration/Groups/<groupname>/metadata.plist, if those don't match, it obsoletes the group by moving the data to an ArchivedGroups folder. To figure out the old GUID, look in the group's folder for the metadata.plist, find the GUID key and get the value from that. Then, you can either change the value in the plist, or change the value in OD.
Either way, the way I "unobsolete" groups is to first, stop the wiki service (sudo serveradmin stop teams), copy the group's folder from ArchivedGroups back into the Groups folder, change the GUID so the metadata.plist and the GUID in OD match, and finally restart the wiki server (sudo serveradmin start teams).

How do I get my Mini (mid-2013 version) to play 5.1 surround sound thru my AVR utilizing an HDMI cable? I have tried the set-up utility and It only sees my TV not my AVR?

I tried using the MIDI set-up but it only sees the TV not my AVR. I even tried using a TOSLINK earphone plug converter into an optical cable to my AVR and that didn't work. Any suggestions?

Hello JaeRoc48,
I understand that the sound is not working.
Go to start.
Type Sound.
Select sound.
Select speakers as default.
Click OK.
Let me know how everything goes.

Error 1920-Service 'Apple Mobile Device' failed to start.

Hi,
When ever I try to install the Apple Mobile Device Support this message shows up "Error 1920-Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services". I have uninstalled itunes multiple times. I have tried only installing the Apple Moblie Devuce Support by doing the extract file from WinRaff. Nothing has worked. Could you please help me? I'm getting relly frusturated with this whole thing. All I want to do is download songs on to my i-pod.
Thank You,
Aleida H.

I guess the short answer is don't try to pass MSI properties to the installer.
I don't think this is anything your fellow users can help with, but you might want to file a report at Bug Reporter.
tt2

Can't download iTunes "Service Apple Mobile Device failed to start.

I have a new computer and I am unable to download iTunes. I get the following message "Service 'Apple Mobile Device' failed to start. Verify that you have suffiecient privileges to start system services." Please note, iTunes is not installed at this point. Previous discussions have been unhelpful, as they direct me to iTunes files that are currently non-existent due to me not being able to complete installation.
Any help would be appreciated! Thanks!

Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.

Vista itunes not installed correctly. Error 7. Windows error 998. Itunes helper not installed correctly. Service Apple Mobile Device failed to start. Insufficient privileges.

OK, spent about 25 frustrating hours so far this weekend doing everything recommended on numerous threads here -- uninstalling and reinstalling itunes and all Apple items. Help?
I am using Windows Vista home premium. After the last iTunes update to 12, it suddenly would not work. I followed, to a T, all instructions to uninstall all Apples software, in the correct order, reboot, download the latest iTunes, run as administrator, plug in the iPhone 5S, let the driver install, and then finish.
Along the way, I received the error that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I am the administrator and have privileges. (I previously followed instructions from anther thread to change the read-only privileges for Apple folders, but to no avail. I also deleted every file with the word Apple in it after I uninstalled everything.) I did a retry and then an ignore during installation of the AMD error, which I have received 10 times.
The other error I keep getting is: "iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7." I have done that 20 times.
Other frequent error: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)."
I followed other threads suggestions to install Windows .NET versions 3.5 and 4.0. No help. I also looked for various specific Apple files in various folders for DLLs, etc. Not present. I have rebooted 50 times and tried different users on my home account as well. Nothing.
I also followed instructions to Manage my computer under "services." Under Apple Mobile Device, the setting is for "automatic." When I try to get it to "start," the error I receive is "Windows could not start the Apple Mobile Device on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion." (I followed previous thread instructions to use the CMD prompt to stop it. That caused problems because the status was then "stopped," but I was able to restart it later once I figured that out -- but with the 1053 error again.)
I think I've tried every suggestion in every thread for the four errors I keep getting (AMD failed to start; iTunesHelper Error 7; Windows error 998; and AMD Error 1053.) I am fresh out of ideas and very frustrated. I mostly want to make sure I don't lose my music and photos, which I was about to sync.
The only other thing I see that is strange on my computer (which I discovered along the way) is that I cannot receive automatic windows updates and have not had an update since 2012. My iTunes worked a month ago, so that was obviously not a show-stopper in the past, but perhaps there is a Vista update I need for iTunes 12? I have service pack 2 for Vista. I have followed all threads to try to set my windows to automatic update, but no joy there either. It checks for updates and then fails. I followed instructions and did run an installation to install windows automatic updates, but that doesn't work either. I tried 10 times. It runs and takes a while, but is never able to successfully update windows. It says "checking for updates" for a while. Then it dies. My last update was 6/19/12 (failed) and it says the most recent check was 6/22/12, but I have tried 20 times on 10/31/14 and 11/1/14.
When asked to "Install new Windows Update software" to check for updates, I have done so 10 times. It downloads and installs, but never works.
It's an old Dell desktop computer from 2006, and I'm using an iPhone 5S. I am fresh out of ideas. Anyone really smart here?
Thanks.
Tristan

Upon latest reboot, I also received this error message: "The application failed to initialize properly (0xc0000005). Click OK to terminate the application."
Then I got the iTunesHelper not installed correctly error again.
Then the "Windows can't check for updates" error message.
Then "Apple Push has stopped working." Then a quick DEP error message that disappeared but said something about Apple Push being closed.
I'm also getting denials of service logged by McAffee. Not sure if I'm getting a virus/attack or not.
Not sure if it's a problem with my old desktop machine, my Windows Vista updates, or iTunes, but I'm very frustrated and out of ideas to try.
Thank you for your help!
Tristan

TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backups

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

XML Parser Error while creating Web service Client using JAX RPC

hello evryone,
Im facing XML Parser Error while creating web service client using JAX RPC. Im using Net Beans IDE for development purpose. I have wrote configuration file for client. Now i want to create Client stub. However i dont know how to do this in Net Beans. So i tried to do it from Command promt using command :
wscompile -gen:client -d build -classpath build config-wsdl.xml
here im getting Error:
error parsing configuration file: XML parsing error: com.sun.xml.rpc.sp.ParseException:10: XML declaration may only begin entities
Please help me out.
Many thanks in advance,
Kacee

Can i use the client generated using jdeveloper 11g to import into the oracle forms 10g, i.e., form builder 10g. Currently this is the version we have in our office.

Wiki service - client only sees wiki is starting up

Similar Messages

Maybe you are looking for