Wiley Enterprise manager offline issue
Hello All,
The Wiley Enterprise Manager which was running smoothly went offline.
It is not getting started when i try to start. Am pasting the contents from log file 'IntroscopeEnterpriseManager.log' below,
Introscope Enterprise Manager failed to start because:
An error occurred while trying to start Isengard.
Press 'Enter' to acknowledge....
nager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
12/07/11 05:42:15 PM GMT+05:30 [INFO] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
12/07/11 05:42:16 PM GMT+05:30 [INFO] [Manager] Started hot config polling. Polling interval set to 60 seconds
12/07/11 05:42:16 PM GMT+05:30 [INFO] [Manager.ServerSocketFactory] Created Server Socket Factory: com.wily.jip.server.ext.DefaultServerSocketFactory
12/07/11 05:42:16 PM GMT+05:30 [INFO] [Manager] Using data directory: /usr/sap/ccms/wilyintroscope_sd2/data
12/07/11 05:42:16 PM GMT+05:30 [INFO] [Manager] The system will store non-counter zero values.
12/07/11 05:42:16 PM GMT+05:30 [INFO] [Manager] The system will shut down if there are Disk I/O errors in 5 continuous timeslices.
12/07/11 05:42:16 PM GMT+05:30 [INFO] [Manager] Using archive directory /usr/sap/ccms/wilyintroscope_sd2/data/archive
12/07/11 05:42:16 PM GMT+05:30 [INFO] [Manager] Reading Smartstor Metadata
12/07/11 05:42:16 PM GMT+05:30 [INFO] [Manager] Loading metadata file: data/metrics.metadata
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] Finished reading Smartstor Metadata
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] Thread priority set at 1
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] Data tier 1 configured at collection frequency 15 seconds for 1 day
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] Data tier 2 configured at collection frequency 60 seconds for 7 days
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] Data tier 3 configured at collection frequency 300 seconds for 23 days
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] SmartStor Tiering time offset configured to 0:00
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] SmartStor conversion of Spool to Data time offset configured to 0 minute
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager.Agent] Configured EM Global Live Metric count limit at 500000
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager.Agent] Configured per-agent metric count limit at 50000
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager.Agent] Configured EM Global Historical Metric count limit at 1200000
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] Available processors is 8
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager.ConnectionTicket] Agent connection tickets = 8
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager.Agent] Agent automatic unmount delay configured to 60 minute(s).
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager.TransactionTracer] Storage directory configured to /usr/sap/ccms/wilyintroscope_sd2/traces
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager.TransactionTracer] Configured introscope.enterprisemanager.transactionevents.storage.queue.limit to 1000
12/07/11 05:42:17 PM GMT+05:30 [ERROR] [Manager] The EM failed to start. Unable to open the Perst backing store: /usr/sap/ccms/wilyintroscope_sd2/traces/traces_20111119.db
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] Shutting down data persistence subsystem
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] Shutting down the Isengard server
12/07/11 05:42:17 PM GMT+05:30 [INFO] [Manager] Orderly shutdown complete.
Kindly advice,
Thank You,
Regards,
Hasan
Hello,
The new problem is that sometimes this historical trace and data might got corrupted due to abnormal termination of EM.
In this case please take following steps:
1. check if there is enough space in the directories /traces and /data.
2. use the script IndexRebuilder.sh in EM installation folder to try to rebuild the data corrupted.
3. If there is any error appearing during executing the script, that means the historical data got corrupted and cannot be rebuilt. Proceed to next item (4).
4. As mentioned in the section 2.17 "Enterprise Manager Corrupted Data Files" in the IntroscopeFAQ.pdf attached in the NOTE 797147, the solution is to delete the directories /traces and /data and restart your EM to re-generate these directories. The side effect is that you will lose all historical data that is stored in the Enterprise Manager.
Best regards,
Guilherme
Similar Messages
-
Oracle Enterprise Manager Configuration Issue in 11gR2 RAC Environment
Trying to configure OEM in 11gR2 (2-node) RAC Environemnt with following command:
emca -config dbcontrol db -repos create -cluster
and getting error:
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)
Kindly help me out how to get out of this error. When see the log generated against this command it shows that database connective successfully established so there is no issue in listener configuration and connection.
Regards,
UmairIt is not even creating the directory hostname.domainname under $ORACLE_HOME.
Regards,
Umair -
Fusion Middleware Enterprise Manager Startup Issue!!
Hi,
I am facing issue with em startup..I have installed the fusion Middleware(UCM11g) in Windows Server 2003..I have tried to login into EM using
http://IP-Address:7001/em...But it is throwing the follwoing error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
Please find the log trace below..
<AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1322655505312> <BEA-101371> <There was a failure when processing annotations for application D:\Oracle\Middleware\user_projects\domains\ucm_domain\servers\AdminServer\tmp\_WL_user\em\hsz5x1\em\em.war. Please make sure that the annotations are valid. The error is oracle.adf.share.security.authentication.AuthenticationServlet>
<BEA-149205> <Failed to initialize the application 'em' due to error weblogic.application.ModuleException: Failed to load webapp: 'em/em'.
weblogic.application.ModuleException: Failed to load webapp: 'em/em'..
<Module em/em of application em is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
There was a failure when processing annotations for application D:\Oracle\Middleware\user_projects\domains\ucm_domain\servers\AdminServer\tmp\_WL_user\em\hsz5x1\em\em.war. Please make sure that the annotations are valid. The error is oracle.adf.share.security.authentication.AuthenticationServlet>
Caused By: java.lang.ClassNotFoundException: oracle.adf.share.security.authentication.AuthenticationServlet
Can you please tell me how to fix this issue?I have cleared the tmp Folder under the Admin Server Directory and restarted the server..but still facing the same error..How to resolve the error *"oracle.adf.share.security.authentication.AuthenticationServlet"*
-
Hello ,
When i am try to open my EM - https://<!!!>:1158/em/console/
It accepts user name and password but then after on next screen it shows "404 Not Found"
Can any body help me out to resolve this issue :)
Thanks - PListener Status
[oracle@<!!!!!> ~]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 06-JUL-2010 06:50:31
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=<Port>))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.4.0 - Production
Start Date 02-JUL-2010 12:49:16
Uptime 3 days 18 hr. 1 min. 15 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<Host Name>)(PORT=<Port>)))
Services Summary...
Service "<Instance Name>" has 1 instance(s).
Instance "<Instance Name>", status READY, has 1 handler(s) for this service...
Service "<Instance Name>XDB" has 1 instance(s).
Instance "<Instance Name>", status READY, has 1 handler(s) for this service...
Service "<Instance Name>_XPT" has 1 instance(s).
Instance "<Instance Name>", status READY, has 1 handler(s) for this service...
The command completed successfully
EM Sontrol Status
[oracle@<Instance Name> ~]$ emctl status
TZ set to GB-Eire
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Invalid arguments
Unknown command option status
Usage::
Oracle Enterprise Manager 10g Database Control commands:
emctl start| stop| status| setpasswd dbconsole
emctl status dbconsole [-secure]
emctl secure <options>
emctl set ssl test|off|on em
emctl set ldap <host> <port> <user dn> <user pwd> <context dn>
emctl blackout options can be listed by typing "emctl blackout"
emctl config options can be listed by typing "emctl config"
emctl secure options can be listed by typing "emctl secure"
emctl ilint options can be listed by typing "emctl ilint"
emctl deploy options can be listed by typing "emctl deploy"
Version
SQL> select * from v$version;
BANNER
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
OS:
RHEL 5 64bit.
Thanks :)
Edited by: Oracle DBA P on Jul 5, 2010 10:58 PM -
Issue with Enterprise Manager 11g
When I start the db console I am given the message
Enterprise Manager is not able to connect to the database instance, The state of the components are listed below.
All components are listed with green arrows indicating they are up
After reading a few posts here I have attempted to use EMCA to drop and re create the repository and settings
I have run the command 'emca -deconfig dbcontrol db -repos drop' to try and do this but it just hangs
Looking in the logs I can see the follow (only the last few lines added to keep it short)
emca_2011_08_05_14_17_29 -
CONFIG: Setting param: REP_DB_RUNNING_HOST value: RangePlanTest.gooutdoors.local
Aug 5, 2011 2:17:56 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Aug 5, 2011 2:17:56 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Aug 5, 2011 2:17:56 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Aug 5, 2011 2:17:56 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: godw, oracleHome: C:\app\server\product\11.2.0\dbhome_2, and user: SYSMAN
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: Passed listener validation check.Listener is up and running.
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Dropping the EM repository (this may take a while) ...
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.util.PlatformInterface isInView
CONFIG: IN_VIEW marker not instantiated in C:\app\server\product\11.2.0\dbhome_2\sysman\config\emca.properties
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Returning env array from cache
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
+CONFIG: New Env List: [ALLUSERSPROFILE=C:\ProgramData, APPDATA=C:\Users\server\AppData\Roaming, CLASSPATH=C:\app\server\product\11.2.0\dbhome_2\jlib\emca.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\srvm.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\srvmasm.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\cvu.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\emConfigInstall.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\ldapjclnt11.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\ldap.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\share.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\srvmhas.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\netcfg.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\http_client.jar;C:\app\server\product\11.2.0\dbhome_2\lib\http_client.jar;C:\app\server\product\11.2.0\dbhome_2\lib\xmlparserv2.jar;C:\app\server\product\11.2.0\dbhome_2\assistants\jlib\assistantsCommon.jar;C:\app\server\product\11.2.0\dbhome_2\sysman\jlib\emCORE.jar;C:\app\server\product\11.2.0\dbhome_2\sysman\jlib\emagentSDK.jar;C:\app\server\product\11.2.0\dbhome_2\oui\jlib\OraInstaller.jar;C:\app\server\product\11.2.0\dbhome_2\oui\jlib\OraPrereq.jar;C:\app\server\product\11.2.0\dbhome_2\inventory\prereqs\oui\OraPrereqChecks.jar;C:\app\server\product\11.2.0\dbhome_2\oui\jlib\OraPrereqChecks.jar;, COMMONPROGRAMFILES=C:\Program Files\Common Files, COMMONPROGRAMFILES(X86)=C:\Program Files (x86)\Common Files, COMMONPROGRAMW6432=C:\Program Files\Common Files, COMPUTERNAME=RANGEPLANTEST, COMSPEC=C:\Windows\system32\cmd.exe, EMCA_JAR=C:\app\server\product\11.2.0\dbhome_2\jlib\emca.jar, FP_NO_HOST_CHECK=NO, HOMEDRIVE=Z:, HOMEPATH=\, HOMESHARE=\\kryten\gooutdoors\users\server, JRE_JAVA=C:\app\server\product\11.2.0\dbhome_2\jdk\jre\bin\java, LIB_DIR=C:\app\server\product\11.2.0\dbhome_2\jlib, LOCALAPPDATA=C:\Users\server\AppData\Local, LOGONSERVER=\\RIMMER, NUMBER_OF_PROCESSORS=4, OH=C:\app\server\product\11.2.0\dbhome_2, ORACLE_HOME=C:\app\server\product\11.2.0\dbhome_2, ORACLE_SID=godw, OS=Windows_NT, PATH=C:\app\server\product\11.2.0\dbhome_2\bin;C:\app\server\product\11.2.0\dbhome_2\bin;C:\Program Files\HP\NCU;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\, PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC, PROCESSOR_ARCHITECTURE=AMD64, PROCESSOR_IDENTIFIER=Intel64 Family 15 Model 4 Stepping 1, GenuineIntel, PROCESSOR_LEVEL=15, PROCESSOR_REVISION=0401, PROGRAMDATA=C:\ProgramData, PROGRAMFILES=C:\Program Files, PROGRAMFILES(X86)=C:\Program Files (x86), PROGRAMW6432=C:\Program Files, PROMPT=$P$G, PSMODULEPATH=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\, PUBLIC=C:\Users\Public, SESSIONNAME=Console, SYSTEMDRIVE=C:, SYSTEMROOT=C:\Windows, TEMP=C:\Users\server\AppData\Local\Temp\1, TMP=C:\Users\server\AppData\Local\Temp\1, USERDNSDOMAIN=GOOUTDOORS.LOCAL, USERDOMAIN=GOOUTDOORS, USERNAME=server, USERPROFILE=C:\Users\server, WINDIR=C:\Windows, WINDOWS_TRACING_FLAGS=3, WINDOWS_TRACING_LOGFILE=C:\BVTBin\Tests\installpackage\csilogfile.log]+
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: CMD /C C:\app\server\product\11.2.0\dbhome_2\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=RangePlanTest.gooutdoors.local)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=GODW))) -repos_user SYSMAN -action drop -verbose -output_file C:\app\server\cfgtoollogs\emca\GODW\emca_repos_drop_2011_08_05_14_17_57.log
emca_repos_drop_2011_08_05_14_17_57 -
SQL> declare
2 l_username varchar2(30);
3 l_sid number;
4 l_serial number;
5 err number;
6 c number;
7 l_job_process_count NUMBER ;
8 TYPE TBSP_ARRAY IS TABLE OF VARCHAR2(64) INDEX BY BINARY_INTEGER ;
9 l_tablespaces TBSP_ARRAY;
10
11
12 PROCEDURE set_job_process_count(p_count IN NUMBER)
13 IS
14 BEGIN
15 --scope=memory so it will be reset on instance startup
16 -- SID=* to take care of RAC
17 IF p_count >=0
18 THEN
19 EXECUTE IMMEDIATE 'ALTER SYSTEM SET job_queue_processes='
20 ||p_count||' SID=''*''' ;
21 END IF ;
22 EXCEPTION WHEN OTHERS THEN NULL ;
23 END set_job_process_count ;
24
25 FUNCTION get_job_process_count
26 RETURN NUMBER
27 IS
28 l_value NUMBER ;
29 BEGIN
30 SELECT value
31 INTO l_value
32 FROM v$parameter
33 WHERE name = 'job_queue_processes' ;
34 RETURN(l_value) ;
35 EXCEPTION
36 WHEN OTHERS THEN
37 RETURN(10) ;
38 END get_job_process_count ;
39 begin
40 -- Now, drop the SYSMAN user
41 c := 0;
42 -- validate user exists
43 BEGIN
44 SELECT username
45 INTO l_username
46 FROM dba_users
47 WHERE username = upper('&EM_REPOS_USER') ;
48 EXECUTE IMMEDIATE 'ALTER USER '||l_username||' ACCOUNT LOCK' ;
49 EXCEPTION
50 WHEN NO_DATA_FOUND THEN RETURN ;
51 END ;
52 -- reduce job_queue_processes to zero
53 l_job_process_count := get_job_process_count ;
54 set_job_process_count(0) ;
55 begin
56 loop
57 BEGIN
58 LOOP
59 BEGIN
60 FOR crec in (SELECT sid, serial#
61 FROM gv$session
62 WHERE (upper(username)=l_username OR
63 upper(schemaname)=l_username)
64 AND status != 'KILLED')
65 LOOP
66 BEGIN
67 EXECUTE IMMEDIATE 'ALTER SYSTEM KILL SESSION IMMEDIATE ''' ||
68 crec.sid || ',' || crec.serial# || '''';
69 EXCEPTION
70 WHEN OTHERS THEN
71 err := SQLCODE;
72 IF err != -30 THEN
73 EXIT;
74 END IF;
75 END;
76 commit;
77 END LOOP;
78 EXCEPTION
79 WHEN OTHERS THEN
80 err := SQLCODE;
81 IF err != -30 THEN
82 EXIT;
83 END IF;
84 END;
85 IF SQL%NOTFOUND THEN
86 EXIT;
87 END IF;
88 commit;
89 END LOOP;
90
91 -- >> START - Capturing the Tablespaces to be dropped
92
93 for crec in (SELECT DISTINCT TABLESPACE_NAME FROM all_tables
94 WHERE owner = '&EM_REPOS_USER' AND table_name IN ('MGMT_TARGETS','MGMT_JOB_PARAMETER','MGMT_AUDIT_DATA')
95 MINUS
96 SELECT DISTINCT TABLESPACE_NAME FROM all_tables
97 WHERE owner != '&EM_REPOS_USER')
98 LOOP
99 l_tablespaces(l_tablespaces.count) := crec.tablespace_name;
100 END LOOP;
101
102 -- >> END - Capturing the Tablespaces to be dropped
103
104 execute immediate 'drop user ' || l_username || ' cascade';
105 set_job_process_count(l_job_process_count) ;
106
107 -- >> START - Dropping the Tablespaces
108 BEGIN
109 IF (l_tablespaces.count > 0) THEN
110 FOR i IN l_tablespaces.FIRST .. l_tablespaces.LAST
111 LOOP
112 BEGIN
113 execute immediate 'drop tablespace ' || l_tablespaces(i) || ' including contents';
114 exception
115 when NO_DATA_FOUND then
116 DBMS_OUTPUT.PUT_LINE('DropRep: Tablespaces for REPOS USER do not exist');
117 WHEN OTHERS THEN
118 err := SQLCODE;
119 DBMS_OUTPUT.PUT_LINE('DropRep: Error ' || SQLCODE || ' received dropping tablespace ' || l_tablespaces(i));
120 END;
121 END LOOP;
122 ELSE
123 DBMS_OUTPUT.PUT_LINE('NO TABLESPACES Exist');
124 END IF;
125 END;
126 -- >> END - Dropping the Tablespaces
127
128 exit;
129
130 EXCEPTION
131 WHEN NO_DATA_FOUND THEN
132 exit;
133 WHEN OTHERS THEN
134 err := SQLCODE;
135 IF err = -1918 THEN
136 EXIT;
137 ELSE
138 IF err = -1940 THEN
139 NULL;
140 ELSE
141 DBMS_OUTPUT.PUT_LINE('not 1940 err' || err);
142 c := c+1;
143 IF c > 50 THEN
144 RAISE;
145 END IF;
146 END IF;
147 END IF;
148 END;
149 end loop;
150 end;
151 commit;
152 EXCEPTION
153 WHEN OTHERS THEN
154 set_job_process_count(l_job_process_count) ;
155 RAISE ;
156 end;
157 /
old 47: WHERE username = upper('&EM_REPOS_USER') ;
new 47: WHERE username = upper('SYSMAN') ;
old 94: WHERE owner = '&EM_REPOS_USER' AND table_name IN ('MGMT_TARGETS','MGMT_JOB_PARAMETER','MGMT_AUDIT_DATA')
new 94: WHERE owner = 'SYSMAN' AND table_name IN ('MGMT_TARGETS','MGMT_JOB_PARAMETER','MGMT_AUDIT_DATA')
old 97: WHERE owner != '&EM_REPOS_USER')
new 97: WHERE owner != 'SYSMAN')
Sorry for the long post but any help would be greatAs a bit of further info I noticed these warnings when running the command - emca -deconfig dbconrtol db -repos drop
Do you wish to continue? [yes(Y)/no(N)]: Y
Aug 5, 2011 4:26:26 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at C:\app\server\cfgtoollogs\emca\GODW\emca_2011_08_05_16_25_58.log.
Aug 5, 2011 4:26:27 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Aug 5, 2011 4:26:28 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C C:\app\server\product\11.2.0\dbhome_2\bin\nmesrvops.exe delete OracleDBConsoleGODW
Aug 5, 2011 4:26:32 PM oracle.sysman.emcp.EMReposConfig invoke
WARNING: Unable to remove DBMS jobs.
Aug 5, 2011 4:26:33 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Dropping the EM repository (this may take a while) ... -
SSO from Solution Manager to Wily Enterprise Manager issue
Hi,
We are facing problem in SSO from Solution Manager to Wily Enterprise Manager. We have done the configuration as per the Wily Enterprise Guide- "Introscope Version 8 Installation Guide For SAP" Page 38.
Our Solution Manager system is running on AIX platform and Wily Enterprise Manager is on Windows 2008.
This is what we are trying
SOLMAN Production Client --> SOLMAN_WORKCENTER --> INTROSCOPE WORKSTATION --> this opens a new browser page and from there we click on Start Introscope -->
Result --> SSO doesn't work, still we get login window.
Introscope Enterprise Manager logs says -->
9/12/11 10:47:17 PM BST [WARN] [Manager] Single sign on failed: No SAP single sign on ticket was found in the request header.
Note: Another Solution Manager system in our landscape (on windows 2008 platform) is connected to same Wily Enterprise Manager (windows 2008) and from this solution manager SSO to Wily Enterprise Manager is working.
Please help me with your expertise to solve this problem.
Best Regards
DavinderHello Singh,
Could you check if you have maintained these parameters in instacne profile ?
From SCN post -> http://scn.sap.com/thread/969538
Hi Hector,
To configure SSO as per initial setup guide, please check your profile parameters in your Solution Manager as below:
You have set up SSO, see also:
SAP Note 817529: Checking the SSO Configuration
Installation Guide and Security Guide for SAP Solution Manager
Create the following profile parameters in the instance profile:
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = fully qualified server name
This parameter must be attributed to the fully qualified server name (for example wdfd002568.wdf.sap). The name must contain at least two periods. See also SAP Note 434918.
Hope this helps,
Regards,
-Rohan
BR,
kamil -
Oracle Enterprise Manager Console Login issue
HI Guys,
I have installed Oracle 10g on my Windows 7 64 bit system and have trouble running Oracle Enterprise Manager Console.
When I open Oracle Enterprise Manager Console it prompts me for a Hostname and SID parameters. For which I have given my System name as the parameter and orcl as the SID.
Then I get an error saying that " Failed to parse tnsnames.ora file ServiceAliasException: 11 "
Please Help!!
Thank you!!
KarthikThe dbconsole needs to be configured, assuming your database instance is up and running ...
For startup info see http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/em_manage002.htm#sthref143 -
Enterprise Manager 12c cloud control console login issue
Hi All,
I have carried out the installation of Oracle EM12c using the SIMPLE install option. I am able to logon properly to the Admin console using the 'weblogic' user credentials. However, when the same credentials are used for the Oracle Enterprise manager Cloud Control 12c it fails with the below error.
Authentication failed. If the problem persists, contact your system administrator.
Please suggest which password and username am I supposed to use to logon to the Oracle EM 12c console.
ThanksOk working, I should use sysman password
-
Oracle Enterprise Manager Issue
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
dear experts i am useing abover version of oracle on RHEL4.
i have installed successfully database but i am unable to access enterprise manager.
i executed the command
oemapp console
it returns command not found.
please help me to find how can i access my OEM.
regards
saimacommand not found ...... is an OS,not an Oracle message. So make sure $ORACLE_HOME/bin is in the PATH. If it is make sure you installed OEM. I don't remember 9iR2 details, but OEM had to be selected as compoment.
Werner -
Enterprise manager cloud control 12c issue configuring Target Disconvery
I've performed a silent agent install of Oracle Enterprise Cloud Control Agent 12c on the first node of a RAC two node cluster (oracle 11gR2) on Red Hat Linux 5.6 64bit.
oemgrid>./emctl status agent
Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.1.0
OMS Version : (unknown)
Protocol Version : 12.1.0.1.0
Agent Home : /emcc/agent12c/agent_inst
Agent Binaries : /emcc/agent12c/core/12.1.0.1.0
Agent Process ID : 31354
Parent Process ID : 31302
Agent URL : http://rac1.respecti.com:3872/emd/main/
Repository URL : https://emcc.respecti.com:14511/empbs/upload/
Started at : 2011-10-25 16:36:47
Started by user : oemgrid
Last Reload : (none)
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0
Number of XML files pending upload : 1
Size of XML files pending upload(MB) : 0
Available disk space on upload filesystem : 91.95%
Collection Status : Collections enabled
Last attempted heartbeat to OMS : 2011-10-25 16:36:52
Last successful heartbeat to OMS : (none)
Agent is Running and Ready
However from OMS server (OECC 12c)
From Setup -> Add Target -> Configure Auto Discovery
Configure Auto Discovery -> Database - Listener -> Agent Based -> Configure
Add Host -> Target Type = Host
Target Name = rac1
Host Name = 192.168.1.12 -> Search -> AND NO TARGETS FOUND
Why
Recommendations Appreciated!If I am understanding correctly, you are looking to discovery a RAC DB on a host on which you deployed an agent. The auto discovery configuration you mention is used to configure the frequency of automatic discovery on a given host after the initial deployment. Normally, you do not need to do anything in this screen.
Immediately after initial installation and successful registration, the agent will search the host automatically for database installations and report its findings to the OMS. These results can be seen in Setup->Add Target->Auto Discovery Results on the Non-Host targets tab. Here you can search by host and you should see a Cluster Database target. To get the target under management, select it and click Promote and follow the wizard.
You can also initiate a discovery of databases on a host by going to Setup->Add Target->Add Targets Manually. Select Add Non-Host targets using Guided process. Select target type in drop down of "oracle database, Listener and Automatic Storeage management". The click Add Using Guided Discovery. Here the agent will immediately scan the host and show the results which you can then complete the target addition process.
If I am misunderstanding you please let me know.
Dave -
Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error
Hello,
I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
lf
WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
INFO: Framework waiting for Action to complete at 15:08:10.272
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
4.b_doDiscovery=false
5.AGENT_BASE_DIR=/users/ncgf/em_agent
6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
7.s_hostname=nsn175-89.us.oracle.com
8.OMS_HOST=nsn175-105.us.oracle.com
9.b_startAgent=false
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4904
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/users/ncgf/em_agent/agent_inst
2. agentBaseDir=/users/ncgf/em_agent
3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
1. Agent Registration Password was not passed.
2. b_secureAgent was passed as false
3. The flag -forceConfigure was assed from agentDeploy.sh
INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
INFO: oracle.sysman.top.agent:Plugin Homes found.
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
INFO: oracle.sysman.top.agent:Plugin command completed with status=0
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 15:08:10.272
Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
"Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output. Also if you can open an SR with oracle support to track this issue and its resolution. "
[ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
[ncgf@nsn175-105 bin]$ ./emcli verify_updates
Verifying updates. Starting validation...
Type : Plug-in
Description: Demo Hostsample Test Plugin
Attributes
Version: 1201000100
Revision: 0
OS Platform: Generic Platform
Plug-in Name: Demo Host Sample Plugin
Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this). -
To Forum Users,
Below is my issue description:
OPS Center 12C is successfully installed & configured on RHEL 5.9 but post installation while trying to configure controller (enterprise & proxy) using http url it redirect to secure port https but doent promts login screen page. Later i found RHEL 5.9 O.S doen't support Ops center 12c.
Did oracle have any bug / patches for this issue ? or any planned release for / against this vulnerabilities ?Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this). -
Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)
I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni -
Unable to open Enterprise Manager in web browser
Hi All,
I have configured EM in my single instance database in Windows server 2008 inside VMware . But i am unable to open em in web browser.
C:\Users\Administrator>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://WIN-4RW5HRZKIEB:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.
Logs are generated in directory C:\app\oracle\product\11.2.0\dbhome_1/WIN-4RW5HRZKIEB_dipu/sysman/log
and my listener status
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 11-APR-2013 23:06:27
Uptime 0 days 0 hr. 58 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File c:\app\oracle\diag\tnslsnr\WIN-4RW5HRZKIEB\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-4RW5HRZKIEB)(PORT=1521)))
Services Summary...
Service "arya1XDB" has 1 instance(s).
Instance "arya1", status READY, has 1 handler(s) for this service...
Service "dipu" has 1 instance(s).
Instance "arya1", status READY, has 1 handler(s) for this service...
The command completed successfully
But when i am entering the eterprise manager link(https://WIN-4RW5HRZKIEB:1158/em) on my web browser of windows 2008 nothing is comming. please tell me how to resolve it
Regards,
AryaI'm having a similar issue.
Did a fresh install of 11.2.0.1.0 under Windows 2003 - latest updates - IE 8.
I can access Enterprise Manager from other computers - but not from the local server.
I've tried both: https://oracle.xxxx.xxx:1158/em and https://localhost:1158/em
Both give me the generic "Internet Explorer cannot display the webpage" - but if I access from another computer it comes up - so I know everything is working... -
Cannot send email using PL/SQL through Enterprise Manager 10g
Hi
I need to schedule a job that sends email periodically. I am using the scheduler in Oracle Enterprise Manager 10g for this. For sending the email, I am creating a PL/SQL job. The code is as follows:
PROCEDURE send_test_message
IS
mailhost := 'iwblrcormsg001.sci.local';
sender := '[email protected]';
recipient := '[email protected]';
mail_conn utl_smtp.connection;
BEGIN
mail_conn := utl_smtp.open_connection(mailhost, 25);
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, sender);
utl_smtp.rcpt(mail_conn, recipient);
utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn, 'This is a test message.' || chr(13));
utl_smtp.write_data(mail_conn, 'This is line 2.' || chr(13));
utl_smtp.close_data(mail_conn);
utl_smtp.quit(mail_conn);
END;
I have setup the smtp server and received a test email from the EM notifying me of successful configuration. When the above job is run, the scheduler shows status as successful. If I go to the command step, it displays the following output:
Output Log
SQL*Plus: Release 10.1.0.2.0 - Production on Thu Feb 19 19:04:29 2009
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> SQL> SQL> SQL> Connected.
SQL> SQL> 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Disconnected from Personal Oracle Database 10g Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Now, the only issue is that I do not receive any email at the address specified! I would be very grateful if someone could point out the error here.I would use APEX4.0 for this.
Create an interactive report based on your data. Add a chart to that report and use the NOTIFY feature to send you the email.
Maybe you are looking for
-
How to delete historic data in a cube or ODS ?
Dear Gurus, My ODS & BasicCube are having few historic records which I wanted to selectively delete. The don't have the Request ID number. I tried going to Cube --> Manage --> Contents tab --> Selective Deletion --> .....then what ?? say, in the list
-
Hi , Please tell me how to find the db size. Thanks, Kumar.
-
Show scrollbar for whole PDF form
Hi, At the moment, on preview or when the form is embedded in a webpage, the scrollbar is not showing. I reckon this is because this PDF form only has 1 page. However, as user is allowed to zoom in/out for embedded PDFs on webpages, a scrollbar is ne
-
DAC - Custom Workflow Task - Parameter file does not exist
Hi expert, I have some issues running custom task in DAC with Siebel OLTP to DW. Please see log below. Anyone can help me in this regard? Note: Siebel Custom Table to Data Warehouse Custom table - Created new workflow in Informatica for custom table
-
Can i add custom thumbnail for sites that do not have them?
I frequent a boardhost discussion board. apparently it has no thumbnail, so pinning the tab is useless, as I only see an empty square. is there a way to choose a thumbnail for it? or upload one? thank you Mac Mountain Lion Firefox 19.0.2 site is publ