Will 20" ACD work in OS9?

I know system requirements list 10.2.8 as minimum, but will it run in OS9 with an nVidia GeForce4 MX video card? Or would I need to get a new video card to run the wide aspect ratio resolution?
thanks in advance for the help.
michael
PowerMac G4 Quicksilver   Mac OS 9.2.x  

most likely not. You'll probably get half the screen or something similair. System requirements are just that.

Similar Messages

  • Will the old 23" ACD work with the Mini DisplayPort to Dual-Link DVI Adapte

    Will the old 23" ACD work with the Mini DisplayPort to Dual-Link DVI Adapter and the new MacBook Pro?
    Apple Store says it is for the 30" only.
    Thanks ... Ken

    I'm not so sure about that. I'd say the jury's still out until someone gets one and tries to use it single-link.

  • Is there any printers (preferably new) that will work with OS9?

    Is there any printers (preferably new) that will work with OS9?

    Sorry about above 'pre' font - for some reason it would not let me do a normal post. It should have been as follows:
    I agree.
    I use a LaserWriter 16/600 PS plugged into my router via an adaptor.
    There are probably many old Color StyleWriters out there: http://en.wikipedia.org/wiki/StyleWriter
    Some of these had Canon engines and Canon produced their own almost identical versions.

  • Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

    Hi Team,
    Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
    and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
    Regards
    Sahil bhateja

    Hi,
    So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
    Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
    Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers. 
    if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
    Yolanda Zhu
    TechNet Community Support

  • HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video.

    my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video. 
    Any Suggestions?

    Restart the computer.

  • Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

    macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

    If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
    It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
    Good luck - take the issue as high up the food chain as you can and see what happens.
    Clinton

  • Using the mini hdmi cord to connect the macbook air and my tv I cannot seem to have anything appear or be heard on my tv.. the MacBook air will flash blue like it is connecting but nothing will seem to work Any advice?

    Using the mini hdmi cord to connect the macbook air and my tv I cannot seem to have anything appear or be heard on my tv.. the MacBook air will flash blue like it is connecting but nothing will seem to work Any advice?

    Hi kxh3011,
    Thank you for using Apple Support Communities.
    This feature is called closed clamshell mode.  To learn more about using closed clamshell mode with an external display and how to set it up, please take a look at the article below.
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    Cheers,
    Alex H.

  • Clicking on iTunes ikon and I get the message the item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.  What can I do, I can't open Itunes.  I have over 4000 songs in iTunes that I had

    When I click on the iTunes ikon I get a box pop up which reads  Problem with shortcut.  The item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.
    My computer which is a packard bell vista operating system, recently stopped working as the power supply overheated and blew up and it has recently been sent back to the Know How team at PC world and it seems to be since it came back I now cannot open iTunes.  I have also tried to search for iTunes in the search bar, I can see several files, but can't seem to open any of these either.  I think that quicktime isn't working, either.
    I have over 4000 songs in iTunes that I had recorded from my collectiong of CD's am  going to loose all these now?  Can anyone help, with very easy instructions as I really don't know what I am doing??
    Thanks

    I would copy over the entire thing if you have room.  With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account.  While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases".  If you have an iPhone, iPod and/or iPad...you can do the same thing from each device.  Nice new feature...just remember that those ripped CDs need a back-up!!!  Enjoy...

  • I have a ibook G4 which has become redundant as my phone will no longer work with the version of itunes installed (latest it can use), how can I back up my phone to transfer to a new computer (a PC now)?

    My iphone 4s (7.1.1) will no longer work with my ibook G4 which is running 10.5.8. I have a PC which i'm now going to have to use, I've manually transferred my music and photos, but how do I go about transferring my contacts and calenders. What does itunes on PC sync to in terms of contacts and calenders?
    Thanks!

    Hi there BDempster,
    You may find the information in the articles below helpful.
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12317
    You can use iTunes to sync the contacts, calendars, notes, Safari bookmarks, and email account information on your computer with your iPod, iPhone, or iPad. iTunes also syncs this information from your device to your computer—for example, if you add contacts on your iPad, syncing adds those contacts to Windows address book or Outlook Express on your computer.
    -Griff W. 

  • I seem to have 2 Apple IDs, one on my MacBook Pro and another on my devices.  If I switch from MobileMe to iCloud on my Mac (under the apple logo) will my devices work and sync in iCloud.  I have no idea how I go 2 IDs

    Can I get rid of one  ID?  How do I do that?

    one on my MacBook Pro
    That's not an Apple ID. That is your admin account which you can view in System Preferencs > Accounts or Users & Groups.
    If I switch from MobileMe to iCloud on my Mac (under the apple logo) will my devices work and sync in iCloud.  I have no idea how I go 2 IDs
    Just use your current Apple ID when you setup your iCloud account that you use for your devices.
    Apple - iCloud - Learn how to set up iCloud on all your devices.

  • Will itunes 11 work with windows xp, I have ended up with this neqw version and it doesn't work , I can look at my library ,but not play and since synching my ipod it is now empty. Apple support is useless, they treat me like I'm on a Mac not a PC .

    will itunes 11 work with windows xp , I have ended up with this new version after accepting an update and now although I can view my library I can't play anything and since synching my ipod it is empty. Apple support can't seem to get it's head around the fact I'm on a PC keeps asking for an apple serial number, Help!!!

    Morning gedeye,
    Thanks for using Apple Support Communities.
    System Requirements
    Windows XP Service Pack 2 or later
    32-bit editions of Windows Vista or
    32-bit editions of Windows 7, and Windows 8
    For more information on this, take a look at this article:
    http://support.apple.com/kb/DL1614
    Best of luck,
    Mario

  • Is there any way to insert a pop up calender and tick boxes into pages on the ipad? And if not if I do it on a mac will the document work on pages on the ipad?

    Is there any way to insert a pop up calender and tick boxes into pages on the ipad? And if not if I do it on a mac will the document work on pages on the ipad? I'm trying to set up a document with quick check boxes to tick and a date to choose rather than type? I know it possible to do it on pages on a mac but i haven't been able to find anything on the ipad to create such a thing, and I don't know if it will work on the ipad if I create it on the mac

    RGA,
    Unfortunately, I do not believe that it is possible for a DAQ board to generate an AI Start Trigger from an analog trigger, but not be triggered itself until it receives a digital trigger.
    Spencer S.

  • If I buy a used iPhone 4 without a data plan will the GPS work?

    I live in Canada and am a complete newbie when it comes to cell phones and data plans. I am not interested in having or paying for cellular telephone capability.
    I've been using the 64 Gb iPod Touch 4 but detest its 0.7 Mb still camera and bemoan its lack of GPS.
    Now that the iPhone 4S has been released, there are many folks selling their older iPhone 4s. I'd love to use one of these older iPhone units with their better camera and GPS capability, but don't want to pay for a data plan, nor am I willing to pay $850 for an unlocked iPhone 4S. I'm happy to continue using wireless internet and don't need a cell phone.
    Being a newbie when it comes to data plans and cell phones, if I purchase a used iPhone 4 from someone:
    1. Does it need a SIM card (activated or not) to use the GPS on it? If yes, must a deactivated SIM card be provided by the seller or where can I obtain one?
    2. Does the iPhone 4 need to be on a cellular plan to use the GPS?
    3. I can use a deactivated iPhone 4 on WiFi only as I've been doing with the iPod Touch 4, correct?
    4. If I can use a deactivated, non-contract iPhone 4 on WiFi only, will the GPS work and allow me to use GPS-enabled apps? If yes, does it somehow still "tie"into available local cell networks to achieve a position without me paying for (or being registered for) cellular access?
    5. Can future iOS upgrades (say to iOS5) still be performed on a deactivated iPhone 4 without a cell plan?
    6. Do I need to purchase the iPhone 4 from a Canadian seller given my above questions? What other questions do I need to ask of the seller when looking for a used iPhone 4?
    Thanks in advance for any help with my newbie questions!

    Thanks for that, Paulfromwallasey. I live in a rural area without many cell towers and with WiFi only in my home. I do use offline maps (topographical and street maps) on my iPod Touch 4 outdoors (not needing a signal, WiFi or cellular). I also have a hand-held Garmin GPS receiver but would rather use the GPS in the iPhone (its positional accuracy, while likely being lower than that obtained from my Garmin, is likely sufficient for my needs).
    I guess that one of the questions that I was asking is if I were to purchase a used iPhone 4 from someone, and the SIM card have been removed, would the device's GPS still work with GPS-enabled apps (albiet without the cellular-assist)?
    Can any pay-as-you-go SIM card be purchased for and used in a deactivated iPhone4? Would this even be necessary for the GPS?
    Thanks again.

  • Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.

    Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.  I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi.  How do I get iTunes to work again?

    Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message:  A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Getting error message : the item Itunes.exe that this shortcut refers to has been changed or moved so this shortcut will no longer work properly. I get this either using the start menu or the desktop shortcut. I tried going to programs /itunes and repair.

    Getting the error message:
    the item Itunes.exe that this shortcut referes to has been moved or changed so this shortcut will no longer work properly.
    I tried going into the control panel/programs /itunes and selected repair which didn't fix it. Any suggestions on restoring the broken shortcut without removing and re-installing the program?
    Running windows 7 home premium SP1
    Thank you

    I think it is some sort of permissions issue preventing the installer from updating the shortcuts. Is your account an administrator of the machine? If it is and you still have the problem then you may need to explicitly use the "Administrator" account for the install.
    tt2

Maybe you are looking for

  • How to resolve the error in bdc call transaction in ALV report

    Dear Experts, i am executing the alv report program and in alv report program one bdc is there.. after executing output is showing in alv format but one button is there (update master)..when i am clicking update button the bdc is run but is not updat

  • Business Objects Financial Consolidation - Excel Link and VBA Macros

    Hi We use the excel links of Business Objects Financial Consolidation V10.5 to import and export data to/from BOF and excel We used VBA macros for the imports but do not know what VBA code is required to export - this code would include the package i

  • IDT PC has stopped working

    upon updating IDT audio and reset my laptop came along this error message, saying that my IDT PC has stopped working due to a problem....after that my HP Compaq Presario CQ45 cannot play sound via speaker but headset can....any help on this????

  • Can't install PS CS6 trial on Mac 10.8

    Continue getting this error message: Exit Code: 7 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ...  -------------------------------------- Summary --------------------------------------  - 0 fatal erro

  • How to use web service consumer as a source to connect to Salesforce?

    I see a lot of articles and mapping xmls on how to use web service consumer but as a newbie I am not able to view the object schema from my salesforce enterprise WSDL after importing it in Informatica designer as a source. My enterprise wsdl has oper