Will 845 Ultra AR support 2.8 Celeron?

Will the 845 Ultra AR running the latest Bios support an Intel Celeron 2.8 CPU?
I see on the support page that it will support P4 to 2.6 & Celeron to 2.4, but I am sure that is out of date.
Thanks in advance.
Anthony
OT: If you had a choice of running a game like Counter-Strike on a 2.26 P4 or a 2.8 Celeron, which would you choose?

Quote
Originally posted by REILLY875
If you read his WHOLE Post, he was saying that he only has 100 Pounds (UK) to spend, and he evidently is NOT going to be able to buy a P-4 of any substance with a little over $120 US.......And I can say from first hand experience, that a 2.8 GHZ Celeron is NOT Dreadfully Slower then an "A" 400 MHZ 2.0 GHZ Northwood that has only 256 KB of L2, Like I said in My Original Reply ...And I dont have to Read any Reviews as I have Seen Both Chips in Action side by side at work...........Sean REILLY875
Missed the part about the cost; Sorry about that. The review was for evidence... As I've worked with both too. I still doubt that a 2.8Ghz Celeron with have better performance than a Pentium 4 2.0Ghz with 256KB or 512KB L2 Cache. Especially in Unreal Tournament 2003. So with that, I wouldnt pay for it but thats on you. Thank goodness the 2.8Ghz Celeron is cheap$ though...

Similar Messages

  • Advice badly needed on 845 ultra DDRs

    hi ppl ... greetings !
    I have a pair of PC2100 (266mhz) DDR 128mb memory in my PC now.
    I have been given a pair of PC3100 (333mhz) 256mb DDR ... but not sure if I can put it in my PC (because the manual said it only support PC2100 & PC1600).
    Will putting the 333mhz DDRs work ?  (or worse, kill my PC ??)  I was told that it will still work but at 266mhz if I mix it with the (266mhz) 128mb DDRs ?  Is this true ?
    Please advice ... thank you !!!
    susanna

    Dear Joshpsu,
    Sorry, you are right ... it is a PC2700 DDR 256mb taht I just got.
    Ok ... I found the spec here :
    MSI 845 Ultra-ARU
    Supported CPUs Socket478 Intel Pentium 4 (Willamette/Northwood core)
    Chipset Intel 845D
    FSB Frequencies 100-200MHz
    Overclocking Friendly Features Supports CPU Clock Multiplier Setting and Vcore, Vmem and Vagp Adjustment
    Memory 3 184-pin DIMM slots for PC1600/PC2100 DDR SDRAM
    Supports up to 2GB memory
    No ECC support
    Expansion Slots (AGP/PCI/ISA/CNR) 1/5/0/1
    USB Ports 4 USB 1.1 ports and 4 USB 2.0 ports
    Integrated Graphics No
    Integrated Sound 6-channel controller from C-media - CMI8738
    Additional Features Integrated USB 2.0 controller from NEC
    Integrated ATA/133 IDE RAID controller from Promise
    BIOS AMI BIOS v1.50
    Form-Factor ATX, 305x230mm
    Thanks to all of you ... I just want to be sure that I won't have a dead PC after putting in the 333mhz DDRs.
    Cheers,
    Susanna

  • P4 Northwood 533FSB on an MSI 845 Ultra ARU

    Just got a simple question here.  Have not been able to find an answer anywhere, so thought I would ask.  Does the MSI 845 Ultra-ARU support the P4 Socket 478 533 FSB proc?  I was running a 478 1.6 @ 2.1 on it, and wanted to get the pops a 2.4 to run on it, so he would not have to overclock.  Game him the board, and Alpha, vid., and memory, and wanted to polish it off with this proc to get him off of the old 700 Athlon (just isn't right  to keep yo dad @ 700 when you have 2 @ 2.1  :D ).
    TIA for the input.
    Darrell

    Doesn't support 533mhz FSB cpus. Only 400 but up to 2.6ghz. You can get your Pops a 2.4ghz 400mhz fsb cpu.
    http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=34%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6398

  • Will the 845 Ultra (6398) take a Celeron 2.6GHz?

    Will the 845 Ultra (6398) take a Celeron 2.6GHz?
    Thanks!

    Thanks,
    I saw that. I'm just wondering whether the page was updated after the release of the 2.6 GHz Celeron.
    Anyway, what is the difference between a Celeron 4 Northwood 2.6G and Pentium 4 Northwood 2.6G?
    One more question, will I get better performance upgrading my stock P4 2.0GHz to that Celeron 2.6GHz when playing 1080p HD-WMV9 files?

  • MSI 845 Ultra support for PATA/133 HD

    I have an MIS 845 Ultra-AR (S478) mainboard with 1X80GB HD attached and the 2 ATA/133 Raid slots that I don't use. I also have a Maxtor SATA/150 PCI Card installed with a SATA/133 drive (100 GB) attached and running. I'm wondering what is the best approach, if any, to attach a Maxtor PATA/133 (300GB) drive (6L300R0). Can it attach to the onboard IDE or is it possible to attach to the SATA card. Attaching to the IDE so far, on AUTO, the BIOS recognizes the drive as 33.8 GB. Maxblast 4 will also only partition 33.8 GB. Attached to the SATA card on the Ultra ATA port ir recognizes the drive but again Maxstor 4 will only partition 33.8 GB.
    AMIBIOS was released 11/26/2001  A6398MS  V3.0. CPU is Pentium P4 1.6GHZ.
    I've been in computing for many years ... this is just getting a bit deeper that I've had to go before. I hope to learn from it as well.
    Any help would be greately appreciated.

    Make sure you are not using a NCQ based drive as ICH4 doesn't support.
    Next, you'll have to install the RAID Controllers for the IDE Controller to work.
    You can also get a SATA to PATA convertor if you want to use the SATA PCI Card.

  • Can I get NetWare drivers for 845 ULTRA ARU?

    845 ULTRA ARU is a good mainboard and it's integrated RAID controller PROMISE ULTRA 133 is a fast solution for WIN 2000 server and Linux server applications. But unfortunatelly I can't get drivers for Novell NetWare 5.x. No driver avalilable on PROMISE WEB works...

    Thanks Cristian,
    Unfortunately what I am using is a Moxa V2101 - it is essentialy a ruggedized netbook computer about the size of a desktop CD-ROM drive, about half of it is heatsink and ports. It's OS is on a compact flash card and data recorded on an SD card.
    About the only option would be a usb-Ethernet adapter, I don't know what my chances of finding an intel version of this are, or if LV R/T can see it.
    It sounds like I am stuck with Win XPe and LV runtime.
    Looks like Microsoft will pick up yet another licence fee for the OS, Not NI.
    I will continue to seek a solution with an intel ethernet chipset.
    It would be good if NI would support a few more NIC manufactures.
    I suspect that this product may have been a convenient spinoff from their PXI embedded PC development.
    Tim L.
    iTm - Senior Systems Engineer
    uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT

  • Help needed pls!!! GF4 Ti4800 SE 8X on MSI 845 Ultra?

    Hi folks,
    I just purchased a GF4 Ti4800 SE 128mb 8X.
    I own a MSI 845 Ultra ARU (6398), I understand this board only supports up to 4X AGP, but the GF4 card should be able to "downgrade" to work with a 4x motherboard, I hope.
    Booting up is ok, but graphics start to tear on the window start-up screen. At the desktop, once i click the mouse, the desktop will hang like for 1 sec, then the monitor switch to Black screen, and then back desktop, this repeats when i click the mouse. There are also some weird colors here and there.
    Can anyone pls advise?

    Quote
    Originally posted by wonkanoby
    serious vga card,is your psu in the same bracket
    Hi there, thanks for ur prompt reply :D
    hmm, sorry i don't realli what you mean by "psu in the same bracket"?
    My PSU is a HEC 475W.

  • 845 Ultra - Slow / Lags

    I always had a weird feeling about my computer , and i realized that there may be a problem since i bought a Visiontek GeF4 Ti 4200 128 mb DDR a week ago. (I bought it cuz i tought my GeForce 2 MX 400 was sorta  lagging) .
    Compared to my dad's computer , who has a:
    Celeron 1.7 Ghz 400 fsb.
    256 Mb DDR 266 Ram
    Geforce 4 MX 440, MSI 845PE
    Sound Blaster Live! 5.1
    a Maxtor 30 Gb 7200 RPM (SLIM)
    Realtek NIC
    WinXP SP1
    mine is significantly slower:
    P4 1.6Ghz
    512 Mb DDR 266 Ram
    GeForce 4 Ti 4200
    MSI 845 Ultra
    Sound Blaster Live! 5.1
    Maxtor 30 Gb 7200 RPM (SLIM)
    Actiontec 56k V.90 H/W Modem
    ATI TV Wonder PCI
    Realtek NIC
    WinXP SP1
    I tried removing the modem & the ATI since these are the only things thats different in our systems without success. Also i did install his system the same way i installed mine, Intel Chipset drivers firts. drivers, etc...
    Heres the symptoms:
    In WinXP, Windows moves slowly, not THAT slow, but they also mess with the other thing on the desktop, like if i move them too fast, all my icons disapear , then reapear one by one, all this is done without even searching on the hardisk. its just like it cant handle all the desktop at once. sort of LAG feeling. And Although we have the same harddisk & ATA 100 controllers, mine is so much slower, on my dad's computer it feels like i didnt even finished to click on an icon and the window appears.  On mine, it takes up to 1 to 5 seconds... With a fresh install of WinXP. it gets sometimes worse. or sometimes , i boot up and its faster (but rarely). i tried to defrag without succes :(   --- The weirdest thing is that games runs OK , loads less faster but in-game playing is aiight.
    Is there anything that would have to be done ? Or is it that strange thing i heard about manufacturer using a batch of faulty component and waiting 4 us to send in repair ?
    Thanks in advance, any help would be greatly appreciated !

       It's hard to believe it's the video card if your games run normally, which you asserted in your first post(unless we're talking about Solitaire). Action games and simulations, for instance, are drawing, redrawing the screen 10 to 100 times a second, each of which is roughly equivalent to moving the window in terms of the graphic resources required. Play a game where the screen is constantly being redrawn and get a frame rate reading. If these games run smoothly the problem is not your video hardware, it is the way the XP  is configured.
       But be sure that you have hardware acceleration enabled for your video card. It seems that the CPU is being called upon to do far too much work when you move a window and maybe the graphics are set to run in software mode not hardware. As I said, when I move a window, my CPU usage goes to only 2%, my video card is doing all the work.
       If your mainboard memory is faulty you'll get random  error messages and crashes. If it's insufficient or not being addressed properly, your OS will need to read/write to your hard drive as a substitute. This could account for the slowness as well as the high CPU utilization. Also games store as much graphics info in the video cards own memory for speedy frame drawing and maybe this is why the games run smoothly and the 2D Windows desktop does not.

  • Msi 845 Ultra C, Ddram Pc333

    My P4 2.4GHz on MSI 845 ULTRA C has DDRAM with 333 MGHz.  The FSB is set to 133 MGHz. However the multiplier is set to 18, and locked in BIOS setup. I want to set FSB from 133 to 166.5 without overclocking the CPU to enable the memmory overcklocking from 266 to 333. How to do it? Or is there another possibility to use 333MGhz with the memmory to utilise its speed?

    Presuming I understood your comment  I should rise FSB to maximum. This could mean the CPU overclock from 2.4GHz up to app. 2.8GHz. Isn't it too dangerous just for speeding up the memmory?
    PS: my mobo is 845-c ultra not i845d
    PS2: [QUOTE:you are actually overclocking your Memory-
       DOES this mean I oveclock the memmory not the CPU? Please explain
    Thanks
    Quote
    Originally posted by Vojtech
    If your CPU has locked Multiplier there is no other way to change DDRAM frequency as overclocking. However, if you are using 533MHz CPU on i845D without official support of 533MHz, you are actually overclocking your Memory. Default detting of i845D is 400MHz FSB/266MHz DDRAM clock. If FSB overclcoked to 533MHz, your memory will work on 33% more, so on 333 MHz

  • How do I change from 1.8ghz to 2.8ghz on a 845 Ultra C?

    Hi!
    I have just bought a p4 2.8 Ghz 400 fsb processor that I want to install on my msi 845 Ultra C mainboard. The current is a 1.8Ghz.
    I installed it and when the computer started up it asked if I would like to enter setup or load standard setup. I choosed standard setup, but the computer stoped. So I turned it off and I did reset the bios, but It will not start again. So I tried to install the old one back again, but the fsb does not longer range from 100-200 but 133-233 instead and my old processor can not run on that High fsb. How do I change it back, and where can i find out how to install the new 2.8ghz corectly?
    Sioncearly Andreas Lindqvist

    I tried to disconnect everything from the motherboard including the backup battary, and then tried again after reconnecting everything to the motherboard with the old cpu, but the fsb is still locked to 133-233 instead of the 100-200. I guess something happened to the mainboard when I choosed load default values on startup when I tried with the new Pentium 4 2.8GHz Northood with 400 fsb and L2 cache of 512kb. I know that is supported as mentioned in this msi page http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=35&kind=1
    I guess I have to try to find a new mainboard then, that fits my cpu, graphic card and memories. The graphic card is by the way a Geforce 4 5700LE with 256MB RAM if anyone has any suggestions. 
    ...and no I can not flash the Bios since the system is not stable with the fsb at 133 instead of 100.

  • Constant reboot on 845 ultra-c with 3ware raid cntrlr

    All,
    I am having a problem with a unit I am building (actually two) where the unit is constantly rebooting when I insert all the PCI cards that I need.
    I am building a DVR system using a 3 card DVR array. I have one live video card, One master (120FPS) and one slave (addtl 120FPS) and all 3 are PCI boards.
    The system is running with a 3ware IDE RAID controller card - also a PCI slot card and 4 200Gig drives.
    If I install the last DVR card (this can be any of the 3 types in any slot) then the unit will not boot all the way to the OS. OS is XP Pro BTW.
    I get past the Bios and raid stuff and then black screen for about 30 secs and then a quick flash of a blue screen and then it reboots and hots the "Not properly shut down - please choose from the ....." Screen.
    I also have no idea how - or if - you can slow the boot process down to see what is written on the blue screen that pops up - too fast to catch on pause.
    Im getting desperate after working with the PC manufacturer and the DVR card/software company - Im getting nowhere.
    Ive tried changing slots a number of times and also changed the IRQ settings from AUTO to seperate levels and still no change.
    Pull one of those three cards out - and it boots fine.
    Any ideas will be appreciated - email or on list.
    Email is: [email protected]
    -Thanks

    The 845 Ultra has bios versions from 3.0 to 3.4 so you either wrote the wrong version or the wrong board.

  • Iaa conflicts in WinXP - ms6398 (845 Ultra AR)

    I am receiving stop messages and conflicts that I have isolated as coming from Intel Application Accelerator v2.2. The stop message will (usually) comment "IRQL_NOT_LESS_OR_EQUAL" and the dump analysis will say that a driver caused it. I can always manifest the problem my running Norton Speed Disk. The problem seems to go away if I uninstall iaa. I done that now based on the advice "don't do that if it hurts".
    Question: has anyone else seen this problem and should I be using iaa? I am using the latest nVidia and CMedia drivers.
    845 Ultra AR
    PIV 1.6a not overclocked
    1 MB Ram
    GeForce2 Ti Pro (MS8855)
    WD 60GB/7200 IDE (no raid)
    100MB Zip IDE
    Acer 1208A CDRW IDE

    I hade IAA crash on win98 and ME so I don't use it at all.

  • Bios updates for 845 Ultra?

    Is anyone aware of any pending bios updates for this motherboard or has it been put out to pasture ?  I'd still like to see a fix for the warm restart problem when overclocking in addition to the 1.65 core voltage limitation.  Before anyone says that those won't be fixed - I can wish, can't I?  

    I have the 845 Ultra-ARU and I am running my 1.8A at 2.52 GHz with a voltage of 1.71 actual applied volts.  This system is rock stable with a fsb of 140.  I have done the VID-pin mod, however.  I too would also like to see a BIOS update for a couple of reasons.  
    1)  According to the temperatures being reported by PC Alert III, my BIOS, and MBM5, my CPU idles at 50 C and goes up to 67-68 C under a full Prime95 load.  The reason why I think this is faulty is because I have run my computer with the side panel off, and there is no difference in the CPU or system temperature.  Also, when running the Prime95 test, I've put my hand right on the heatsink and it is BARELY warm.  The heatsink is making solid contact with the CPU, so if the CPU was actually at 68 degrees C, the heatsink too would be incredibly warm.  My own hand tells me that it cannot be 152 degrees Fahrenheit.
    2)  THE MEMORY RATIOS ARE GARBAGE!!!!!  I've got a 2.52 GHz CPU that is suffering a bottleneck from the measly 2.0 GB/s that my RAM is able to feed it.  Every other motherboard I've ever seen gives you the options of a couple different memory ratios.  I would at least like the option to run my memory at a different speed than my fsb.  Perhaps a 3:4 ratio could be done?  Just something so that I can try and get a little more bandwidth out of my RAM.  I know that the board is only designed to support PC1600 and PC2100 DDR RAM, but how could it hurt to give the option to support PC2400 or PC2700, maybe even PC3200 DDR RAM?  Plenty of other 845 chipset based boards can do that.  (Not officially, but through a variety of memory ratios.)  I'm just tired of not being able to do anything with my memory.

  • MSI 845 Ultra C with sound card???

    I recently bought a P4 2 Ghz with MSI 845 Ultra C, Geforce 4 Ti4200 128.
    A few weeks later i bought a simple sound card with surround support. Now when i try to install this software (Xp compatible) i get the error that the sound card is not installed and that the data is incorrect. I use the latest drivers from the internet. I believe this problem had to do with the onboard sound card of the motherboard. Is there anyway i can disable that???

    it is an XP bug, you might try windows update to see if MS fixed it.
    Here is for example ATI's doumentation of the error.
    I assume the bug won't be fixed by the update, so in that case you need to reinstall XP with the card already insalled in the slot.

  • Does KT3 Ultra 2 support PC3200?

    I cannot locate the manual for this mobd, but was wondering if anyone knows if the KT3 Ultra 2 board supports the Kingston 512MB PC3200 DDR RAM? or am I stuck with PC2700 memory?
    My system is so unstable, locking up many times a day. The mobd. is a RMA replacement from MSI (due to secondary IDE problems). XP w/SP2 loaded fine, but PC hangs at bootup or usually within 30 minutes.
    Thanks.

    I don't have the PC locally now, so I cannot check the power supply manufacturer information.
    However, I can tell you that the power supply is brand new as is the case I just purchased. It may be an Austin 300W if my memory serves me right.
    I have gone through this website (http://www.msicomputer.com/support/sup_tshoot.asp) and forum and found the most likely causes of system hangs appears to be:
    1. old BIOS
    2. CPU problems
    3. memory mismatch/bad
    - The motherboard just came in from MSI as an RMA replacement, so the BIOS is probably the latest (5.7). I will verify this weekend.
    - The CPU is newer, so it is not likely. Although, I can swap it  and try it out this weekend.
    - I know for a fact that the memory is from different manufacturers. I have 256MB and a 128MB PC2700 from different companies. I tested them one at a time, and they ran clean. It is possible that there is a conflict, that is why I began looking for replacement memory. At this time, PC2700 is more expensive and less available than equivalent PC3200, too. So, these are the reasons I am checking into the KT3 Ultra 2 support of PC3200 DDR memory. Thanks.

Maybe you are looking for