Will a 820-1189-a board fit in my a1181 that i had a 820-2213-a board bac?

will a 820-1189-a logic board fit in my a1181 that i had a 820-2213-a board that went bad?

The answer is no for any one who looks at this.

Similar Messages

  • Will an X230t system board fit in the standard X230?

    Related to my other post about my 2306CTO X230 no longer powering up:  if I happen to find a replacement system board for the X230t tablet version, will it fit in my standard X230?
    The FRU for my system board is 04Y1670.  Might have located a reasonably-priced replacement for an X230t, FRU 04W6804.
    Thanks!

    rgiles schrieb:
    will it fit in my standard X230?
    If you use a dremel, maybe, but I recommend you to buy a X230 (non-Tablet) system board.

  • Will a late 2007 logic board fit in a early 2006 chassis?

    I have a 2006 MBP and the GPU went out in it. Common problem, so I've been told. I am just going to replace the logic board and was wondering if the late 2007 logic boards fit in the early 2006 body. If not, what will fit? Just trying to get a little more bang for my buck. It's a 17 inch, by the way.

    The answer is no for any one who looks at this.

  • How do I know if my Edge Animate compositions will scale up or down to fit each mobile phone platform's resolution? iPhone 3s, 4, 4s, 5, and 5s all have different resolutions. Do I use .png or svg?

    I want to use Edge Animate to create native app in PhoneGap Build. How do I know if my Edge Animate compositions will scale up or down to fit each mobile phone platform's resolution? iPhone 3s, 4, 4s, 5, and 5s all have different resolutions. And do I use .png or svg?

    If you use responsive scaling it will definitely scale .
    For best practises regarding graphics refer
    Edge Animate Help | Best practices for graphics in Adobe Edge Animate

  • Will an iPad mini 2 case fit the new iPad mini 3?

    will an iPad mini 2 case fit an iPad mini 3?

    Yes, the dimensions of the iPad Mini 2 and iPad Mini 3 are identical.

  • Will this Solid State Hard Drive Fit in a Desktop Computer?

    Will this Solid State Hard Drive Fit in a Desktop Computer?
    http://www.newegg.com/Product/Product.a … 6820208315
    Any info is greatly appreciated; thanks!

    I think you'll need two adapters as well. One to mount a 2.5" drive in a 3.5" bay, and one to convert the smaller 2.5" IDE connector to the bigger type found in desktop PCs and a separate power plug.
    Here's two examples. I'm not recommending either of these products, they're just the first ones I found!
    http://www.newegg.com/Product/Product.a … 6812116211
    http://www.newegg.com/Product/Product.a … 6817984006

  • Will old Iphone 5 cases still fit the Iphone 5s?

    Will old Iphone 5 cases still fit the Iphone 5s?

    the cases will fit, but now that there appears to be 2 flashes on the 5S, this may be impacted.

  • Will an iPod Classic 80gb case fit the 160gb Ipod

    will an iPod Classic 80gb case fit the 160gb Ipod

    The 5th Gen 80GB case would be too loose for the slim 160GB iPod Classic, but maybe you can put in ugly styrofoam fillers. But the 6th Gen 80GB is the same thickness as all 160GB model. So depends on which 80GB model casing you are refering to.
    Dimensions
    5th Gen 80GB = 4.1 x 2.4 x 0.43*
    6th Gen 80GB/160GB  = 4.1 x 2.4 x 0.41*
    Have a nice day!

  • Will my ipod mini power cord fit my new nano

    will my ipod mini power cord fit my new nano

    There is no direct to power plug included in the nano pkg., only a usb connector. My mini power is firewire to a wall plug and a regular pinned adapter to the iPod. The connector that came with my iPod mini looks like the same pinning, but it is deeper(?) that the nano plug. I have tried to use it but no go. I thought someone else may have a fix, or an idea as to why it is not working.

  • New logic board fitted & posible os failure

    Sorry if this is long winded. My son (just finished Uni but lives 200mls away) has a 33 month old iMac G5, recently it would not always power (eg no electricity) up before finally failing.
    It was taken to the local Apple Centre who said the logic (motherboard) had failed (due to a FireWire prob), a new one was flitted this week under 3yr warranty, however the shop said it will not boot up with the existing Hard Drive (but will with another) due to an OS failure (not covered under warranty, they said the Disk Utility is greyed out, (guessing they put it in a caddy). They said they will do several formats of the drive before reinstalling the OS on existing drive at a cost of £100!!!!!!! Now I have some questions as they need to know ASAP.
    1. Could the logicboard failing, affect the OS or via versa.
    2. Is the shop trying some rip off on cost of multiple reformatting saying it will take 2hrs to do?
    3. Would we be better off getting a new hard drive and installing OS ourselves, or get shop to put in new HD rather than multireformat old HD to save on time? And then get some data recovery specialist to get all his photo’s off (although shop says it can’t be done).
    4.Is there a known issue with the board failing so early board?
    Thanks in advance.

    Hi ramasay-
    Greetings and welcome to the Apple Discussion boards
    I will answer to the best of my ability.
    1. The logic board failing could have caused something on or with the drive to fail. Simply ask for the old drive back, get an external FireWire case, and access the drive that way. It is possible that a utility like DiskWarrior might be able to recover most of your files.
    2. Actually it might take longer to format depending on the size of the drive.
    3. Depending on the model iMac and your technical abilities replacing the hard drive yourself might be the cheapest option. Make sure doing so will not void any warranty that you might have on the logic board replacement. It may be wise to have the shop install a new and larger hard drive and install the original system on that.
    4. Many things can cause a logic board to fail. To have it repaired under warranty or AppleCare is a beautiful thing. You may check here to see if you are covered by any of the repair extension programs for known covered issues with iMacs: iMac Programs
    Luck-
    -DaddyPaycheck

  • Which mother board fit in hptx1003au

    which mother board fit in hptx1003au 12.1"screen

    Hi,
    You can find part # on page 66 of the first manual on the following link:
       http://support.hp.com/us-en/product/HP-Pavilion-tx1000-Notebook-PC-series/3185026/model/3348236/manu...
    You may want to bookmark the above link for future references.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My safari will not open after downloading librooksbas.dylib plug in. message that is displayed when i try and open is "safari quit unexpectedly while using the  librooksbas.dylib plug in" i can either re-open or ok the error to which neither work :(

    i have tried the terminal code thing where you enter certain words then press enter and it worked but as soon as i restarted it and opened safri the error message apperarewd again my software is OS X 10.9.1

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/\(.*: \)\(.*\)/ \(\2\)/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed 's:/Users/[^/]*/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • When I go into any app that requires me to use the key board I instantly go back to the home page and can't access anything (not even settings)

    When ever I go into an application that requires me to use the key board the app just closes down and takes me back to the home page.  I can't even get into settings.  Also if I bring up the key pad it just sticks after I press a couple of keys?  Help?  I can't get into fb/pages anything!

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • My macbook pro goes to sleep by it does not wake up. I have to restart it. I had recently to change the board in the attached Thunderbolt display.

    my macbook pro goes to sleep by it does not wake up afterwards. I have to restart it. I had recently to change the board in the attached Thunderbolt display, because I noticed that the same problem arose when the display was attached.
    Now with the new board, it can't be the display's fault. I hope it is not macbook pro's main board fault. Maybe hasthe notebook board been damaged by the faulty display?
    To bring my MacBook Pro to service will slow down my work. This is why I am posting this message, in the hope to be able to run a diagnostic test myself.
    Thanks a lot, in advance.

    Hello Aminetti,
    It sounds like your computer goes to sleep, and will not wake up, so you must manually restart your computer. I recommend the troubleshooting in the following article:
    OS X: When your Mac doesn't sleep or wake
    http://support.apple.com/kb/TS5357
    Reset SMC
    Reset NVRAM/PRAM
    Test with external devices disconnected
    Try Safe Mode
    Try another user account
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Is it normal that 2 years old macbook pro logic board died

    is it normal that 2 years old macbook pro logic board died.i Went to apple repair plase and they said that logic board is ded.is it really OK that in 2 years it dies.

    Hi,
    No it is not normal nor it is a gamble. It will be a shame if anyone within Apple thinks that you were gambling on the quality of their products by not buying an extended warranty.
    When someone buys a machine like a MacBook Pro from Apple you are not gambling with quality. But investing by forking out a higher amount of money than people do find less expensive solutions. This is, of course, a personal choose.
    When a computer dies within two years anyone can see that the machine was not build for such a period and therefore it is not more than reasonable to have it repaired or replaced on the costs of the manufacturer.
    In growing amount of (European) countries customers are protected against the approach of limited warranty. Apart from the one year warranty, people are entitled to have a device (in your case a computer) on which they can rely on for many years, unless stated differently (except for wear and tear for which a manufacturer is not responsible for).
    Buying an extended warranty (as a warranty against a failure of the product) is no more than a commercial exploitation against which consumers should be protected. Which only can be achieved through proper legislation in the country you live in.

Maybe you are looking for