Will a black and white logo show up good on a black T-shirt?

I'm creating a black and white logo and I wanted to know if it would show up good on a black shirt. Thanks in advance.

That's not really enough information, Chris. Are you printing black ink on the black shirt? That has the potential to either come off as a cool, "stealthy" look, or an essentially indiscernible waste of ink. It depends on how different the ink and fabric are in terms of darkness and reflectivity.
If you post an example of the artwork, it would be easier to advise you.

Similar Messages

I get a black and white logo and a progress bar after upgrade ipad2 5.01

i get a black and white logo and a progress bar after upgrade ipad2 5.01

See this page : http://support.apple.com/kb/HT4097 - it covers :
iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.

My black and white pictures show up colored

My photos aren't the same as the filter I used in the camera when I was taking the picture, for example my black and white photos show up colored.

Have you checked your ink levels and the inkjet jets for plugging?
OT

Black and white photo shows up as a colour photo in iPhoto

Hi all,
Can someone please solve this mystery for me?
I took a black and white photo with my Nikon D40. It appears as black and white when I play it back in the camera.
When I transferred this black and white photo, along with other colour photos, to iPhoto, it showed up as a colour photo on my computer.
Why is this?
Thanks for any insight...

Lutetia
You didn't take a black and white photograph. Your D40 can't take a black and white photo, it can only take full colour. To make the photo look black and white the D40 set a flag on the file. This flag is an instruction: display me a certain way. iPhoto is not aware of the flag and so shows you the full colour pic.
Regards
TD

Why is my black and white video showing purple/green color cast from ProRes 422 h264?

When transcoding from ProRes 422 to h264 in Adobe Media Encoder, I'm seeing both green and purple color cast on my black and white video. ProRes on top, h264 on bottom.
https://www.dropbox.com/s/dqzkkje3ccgravb/Screenshot%202013-10-28%2013.33.27.png
Another example:
https://www.dropbox.com/s/5e1qyhmycgwbpkt/Screenshot%202013-10-28%2014.14.36.png

What do you make of the fact that the same video, encoded in MPEG Streamclip does not have the issue on the same hardware, played in Quicktime Player?
A valid data point for consideration, but the only way to know with certainty is to get the image onto a calibrated TV.
Observation will always trump deduction. So...observe! (Just be sure to do it accurately with a calibrated TV.)
The Vimeo preset is creating H.264 MP4 files. AVCHD is a very specific subset of the H.264 codec, and cannot be generated by PP.

Black and white disaster!!!!!!

everytime i put a picture into black and white then i try to remove the black and white to make a little color show IT DOESNT WORK!!! please help me!!!!

Hi Abigail and welcome to the forum.
I don't know how you are tutning the image to B&W, but if you want to have parts of the image in colour, you need to use a B&W Adjustment layer.
Layer > New Adjusment layer > Black and White
Then use the paint brush with black as the forground colour, and paint over the areas you want to have full colour. You need to make sure that the layer mask is selected in the B&W adjusment layer. You can tell because a) it will have a double outline, and b) if you have it wrong, you'll be paint onto your image.
The technique you are trying to use is called 'Colour Pop'. So you can use that term to search for help if you need a tutorial.

Vectorizing a black and white graphic

Hi,
I have a black and white logo with text included in it which I just scanned. All I want to do is convert the image to scalable vector format and be able to individually edit each font as well as the outline of the logo itself. What would be the best way to do this in Illustrator - the version which came with CS2?
Thanks.

Since you sate the scanned artwork is a logo, I suggest redrawing / typesetting the logo instead of sing Live Trace. Unless it's by design, logos should non look rough and hand dawn, which is what Live Trace will look like.
If the logo is for a moderately well known company you could try to download a PDF from their website, which might have the logo in vector format already. Also try
brandsoftheworld.com.

Lexmark C54x - True Black and White Printing

As shipped this 1200dpi color laser printer - C543dn works with Leopard over a network (yes!).
There is only one thing I wanted to do that was not obvious - how to force black and white even when printing originally color images, and make sure only the black toner is used. A lot of websites use color, of course, and you may not want to pay for that either in time or toner!! As you probably all know the quartz filter option has been removed in Leopard, so unlike "another OS" you don't have a simple printer-independent "print mode" setting to set to black and white.
After a lot of looking around for a manual which details the printer driver options (there isn't one - confirmed by Lexmark support) this is what I have puzzled out. BTW - There is an alternative approach that involves saving to pdf, and then using preview to resave the pdf with the quartz filter applied - but this is simpler if all you want to do is print.
Basic stuff - Printer Independent
You have to do the set up within "Print..." within in an application (like Firefox or Safari). When you select a Printer in the print dialog you can also use a Preset - it appears in the field under the printer name in the print dialog. To set up the profile the way we want it, first use the "downarrow" to the right of the printer name to access the extra print dialog options.
Now you need to get the Mac to turn everything color in the output to gray - you do this by finding the "Color Matching" option -- its in a pull-down list (half-way down the expanded dialog, in some applications that list starts with the app name (like "Mail"), sometimes its in a list that starts with "Copies and Pages" - each application chooses how this page looks, adding to the confusion). Inside that option, you select "ColorSync" radio button and find the "Generic Gray Profile" in the pulldown. This is the replacement for the quartz filter. But that doesn't mean the printer will only use Black toner... that would be too easy!
Printer Dependent bit - in this case Lexmark C543.
Now move to the "Printer Features" options (also in the list that has "Color Matching") and a new sub-list pulldown will appear - for the Lexmark it has "Quality 1" as the first option.
- In this sublist select "Quality 1" - set the Resolution field to 1200 dpi.
- Then select "Color" (still in the sublist) and set the Color Correction field to "Manual".
- Finally go to the "Manual Color" in the sublist and set all 3 of the RGB fields (Image, Text and Graphics) to "Display - True Black".
After doing all those settings, go to the Preset field pulldown (the one under the printer name at the top) and select Save As... Give it a nice name (Black and White, perhaps?). This way you can recall this preset and all the settings easily. For color you can just go back to the Standard preset.
Now you can print your monochrome masterpiece.
This way I definitely got black and white (grayscale output). Verifying that only black toner was used is not a slam-dunk but it looks like it was. Anyone who has better info on the printer driver and the correct settings (maybe this was overkill even?) please feel free to correct/enhance.
Hope this helps someone else.

I really like the printer. It is fast, and it was a breeze setting it up as a network printer. Built in duplex is also very cool.
The only drawback is that it uses a lot of toner, which gets expensive. So far I have gone through two black cartridges printing a little over 3000 pages. According to Lexmark, one cartridge is supposed to last 2500 pages, so that doesnt seem right. The pages I have been printing haven´t been THAT full.
But maybe this applies to other brands as well? This is the only color laser printer I have owned.
Anyone else with experience on this? I have been looking for toner refills, but so far no luck..

Black and White Preview for all images Quick and Easy can it be done?

Before I switched to Mac, I used a google program to do my iphoto/aperture like editing called Picasa. Picasa allowed me to change my view to black and white so that all my images looked black and white until I changed my view back. This was GREAT for letting me look at a wedding or a group of images and quickly scan for the ones that looked spectacular in black and white as apposed to color.
I have been desperately trying to find a setting in Aperture that will allow me to do that so that I can get a super quick preview of everything and mark the ones that I want to really spend time converting to black and white.
Does anyone know how to do this? I would almost be willing to change my monitor settings to greyscale temporarily if that is even possible.

What I do is this:
In the View Menu set Proofing Profile to Gray Tone.
Then anytime you want to see things in B&W, hit ShiftOptP
(Pictures are only B&W in Viewer only mode--large or full screen. But you can use the arrow keys to move through a whole album)

My black and white printing has a color tint to it. How do I change this?

It seems like whenever I print anything that is supposed to be just black and white, such as a word document, the black is not a true black--it has a colored tint. I originally thought this was a printer issue and contacted tech support for the printer, but they identified it as a computer issue once we hooked up multiple printers to the iMac and the same thing kept happening. There is no setting I can find in the computer to change this because I don't know what its called. Any help would be appreciated!

angryantaloupe82 wrote:
the first printer it did it on was a canon mp460, the second it did it on was an HP 4400 series, the third it is currently doing it on is an HP officejet 4500. I have tried changing the settings in the print dialog box to the b&w or grayscale, it still does the tinted black.
I had the canon mp180. I have the HP psc 1209 now. I haven't seen this problem with 10.4.11.
Curiously, I heard of this problem with some Ubuntu drivers. Turned you their conversion program GhostPrint could only convert to either black or color. The color convert resulted in grey black. It was with an HP printer. Ubuntu & Mac OS X share some of the same print technology.
I see you have iMac, Mac OS X (10.4.9). I suggest you upgrade to 10.4.11. Pick one of the combo updates referenced on this page:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Regardless of the print problem, you should upgrade. Do you have wireless, if so you will need to reconfigure.
Robert

How to set default to convert a document to a black and white pdf file?

I have dozens of color Word files that I need to convert to black and white pdf files on a weekly cycle. I figured out that I can do this for individual files by clicking "print", "properties", then choose the "paper/quality" tab, and then click on "black and white". However, I cannot make the "black and white" selection permanent. That is, the next file requires me to go through the same four-step process to convert a Word file to a black and white pdf file. Any suggestions on how to make the "black and white" selection permenant?

Sorry. I forgot to mention that I am using Acrobat Adobe Pro 9.4.2.

Black and white PDFs printing in changing colours from preview

I am often printing black and white PDFs from preview with my HP PSC 1510 All in one printer and scanner. After updating to OS 10.6, my PDFs have been coming out in colour. They usually start in black, then change in the middle of a line of music or text to purple, red, blue and green. The longer the document, the more different colours I get. This is not occuring when printing black and white documents from NeoOffice, only when printing black and white PDFs from Preview. As this is what most of my printing consists of, this is extremely annoying.
I am high on black ink, as I recently changed catridge and I have also made certain that the printer driver knows this by using the printers and faxes preferance panel and selcting the" levels of material" button to update this, and it seems to understand that I am high on black and low on colour, but still the problem occurs with every PDF i print. (If this button is called something else, but similar, that is because I am using a norwegian system and don't actully know what it is called in the english OSX.)
There is no "print in black and white" button in the printer dialog either, so I can't fool the printer to print in black and white what it perceives as colour in my black and white PDFs either.

Be sure you have applied both the 10.6.2 update and the absolute latest drivers for HP from Apple:
http://support.apple.com/kb/DL907

When i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour .

when i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour . pls say me how to fix this plssss . my email = **********
<E-mail Edited by Host>

Wrong Forum

WII and VCR will only show in black and white.

While in WII or VCR mode, the video only appears as black and white. Any suggestions?

You might want to try this as well.
1 From the Preferences menu, highlight AV Input.
2 Press left or right to select your desired setting.
so if your using a composite cable, then you have to switch AV Input to VIDEO then if you are using component then you have to switch back to COLOR STREAM

Films only showing in black and white

hi,
I've just got the Iphone and when I try and watch a film from Itunes through my tv using the AV composite cable it will only show in black and white. The cable is new and when I've tried it with my 5th gen Ipod it works fine. I've checked the connections and everything seems to be hooked up OK. Anyone have any ideas on how to fix this?

When installing the new cartridges, did you get the message "Original HP cartridges have been installed"?
Can you check the ink levels and actually see the been color displayed?
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Will a black and white logo show up good on a black T-shirt?

Similar Messages

Maybe you are looking for