Will a Compaq Presario CQ70 motherboard work in a CQ70-120US

I am trying to replace the motherboard in this laptop b/c it is dead... although I can not find ANY motherboards associated with a cq70-120US but many that are simple cq70. WOuld the basic CQ70 motherboard work for my laptop or am I just screwed?

Hi,
Your machine requires mother board on the following list:
     http://partsurfer.hp.com/Search.aspx?SearchText=FS110UA
There are 111 models/products use  part #494282-001. You need to source from them:
    http://partsurfer.hp.com/Search.aspx?SearchText=494282-001
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Need Compaq Presario F700 Motherboard

    I  am using Need Compaq Presario F700 since 2 yrs. but suddenly my laptop stop working. It does not even start. I showed it to some people but they are not assuring me about the repairement. As per them it is now scrap and will cost 8000 rs for repairment with just 2 months warranty.
    I need a new motherboard pl help me in this direction.

    We need your exact model number or better yet the motherboard model. Remove the memory cover and the memory chips and the motherboard model is engraved on the motherboard right where the memory chips are.

  • Compaq Presario mouse isnt working properly

    Im having certain issues with my touchpad. i jsut brought this computer about a week ago and sometimes areas of the touchpad doesnt bothering working. At some points and times the whole pad works but after a few minutes of not touching it it just stop working and only part of teh touchpad works. its very weird. the only area i can move the mouse after it freezes up is under the touchpad light where u can turn it off. only that area under it. ive tried windows update for synaptics touchpad/mosue drivers; ive tried device manage and select update, and also tried from teh site witht he highest selectable firmware.usually if i restart ,close the lid, or reset device it works fully again, but i dont wanna waste my time with a touchpad that wont wrok properly. i have to say compaq presario is a very nice laptop and i wouldnt want to take it back which the store i got it from ran out of stock. I just want to find a solution first incase i have to return it back.
    -compaq Presario CQ56(219wm)
    -windows 7 home premium x64bit
    -yea i think its 219wm if not mistaken

    Hi,
    Please try this first:
       http://support.microsoft.com/mats/cd_dvd_drive_pro​blems/en-us
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How much RAM will my compaq presario c770 support? Or what will the motherboard hp 30d9 support?

    My operating system is 32 bit windows vista home premium. I am aware that a 32 bit system will only support up to 4gb of RAM.  I really just need to know what the motherboard "Hewlett-Packard 30D9" will support at best.  I already have 2gb of RAM and I just want to know if it would be useful to attempt to add more. I am also aware what products are available so don't give me links to stores.  The RAM type currently installed is DDR2, if that's significant in determining the maximum effective RAM.  The old girl has some age on her so my warranty is out, which apparently means no email support from hp, the dicks.  I recently did a factory restore and upgraded my battery, I'm just sort of seeing how well I can make my 2008 laptop run so any suggestions regarding my particular computer are welcome. Thanks in advance.
    This question was solved.
    View Solution.

    Hi,
    Its specs is in the following list:
       http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=125&prodS...
    I believe your machine already has max RAM installed.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Compaq presario cq56 fan stop working

    compaq presario cq56 stop working though the system is still working fine to some extentd

    does that mean i have 2 replace the fan

  • HP compaq Presario C700 LAPTOP NO Power

    Hi I have a compaq presario c717nr that works with a charged battery, my ac adapter works as I have an hp pavillion d6000 and it works, also tested the ac adapter from my pavillion on the presario and it does not power up with out the battery, when plugged in to ac adapter with the battery on it says charging but it does not charge or power the laptop on ac power only. need help

    I have exactly the same C717NR and same exact symptoms. It will work with a charged battery. With AC adapter in, the power jack blue led comes on only if the battery is on. And as u said, it doesnt really charge as I see that the battery charge is dwindling. Also, as soon as you remove the battery, the ac power jack led goes off. The laptop cannot be run directly via AC. I checked an exact same c717NR and his works fine on AC even when you remove battery while windows is on.
    So my question is whether if its the dc power jack that bad or some thing else is messed up? I can say I even swapped mother board and had the same problem. 
    Thanks.

  • Hp Compaq Presario 2100 screen stays black, please help!

    My laptop, which is a HP Compaq Presario 2100, stopped working. I'll try to explain the best I can what's going on:
    When the laptop is plugged in and then turned on, all of the lights on it will turn on, all of them except for the power indicating light. The screen remains completely off, and it doesn't sound like the hard drive is running, just the fans. The CD drive and floppy drive both work. The weird part is that the things that do turn on only stay on for about 10-20 seconds and then everything shuts down. And no matter how long the laptop is plugged in the charge light never turns on and the battery in the laptop never gains any power. I can tell this because this particular battery comes out and has a manual indicator of power on its side.

    Try this support document http://support.apple.com/kb/TS3281 and if that doesn't work, then make an appointment with the Genius Bar at the Apple store to have the hardware checked.

  • Compaq presario v6210US blank screen

    I have a "compaq presario v6210US" which worked great for a while then it just shut itself off and restarted and the screen stayed black. Now it keeps restarting itself but the screen stays blakc. I can hear the fan and hard drive and everything else running the way it's supposed to. I heard that this has happened to a bunch of other people so it sounds like a defect to me. How do I get it fixed or do I just pull the hard drive, toss the Presario and get a competitors laptop?
    This question was solved.
    View Solution.

    Hello @Sachmo499 ,
    Welcome to the HP Forums!
    I understand your notebook keeps restarting and displays a black screen.
    Here's a great place to start troubleshooting startup issues on a notebook: 
    Computer Does Not Start and the LEDs Blink or the Computer Beeps.
    Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    Testing for Hardware Failures (Windows 7, Vista) or Testing for Hardware Failures (Windows 8).
    If you search for any notebook boot issues or black screen, regardless of the brand you will find this issue everywhere. There are currently no recalls for this product.
    If you wish to have the notebook repaired I would suggest calling HP Phone Support for service/repair options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
    If you wish to remove the HDD and connect it to another computer to backup your info, you can follow this guide: Compaq Presario V6000 Notebook PC.
    Hopefully this helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Ethernet Controller - Driver not installed - Compaq Presario

    Hello, I am new here so be gentle
    I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
    In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
    Details in properties show the following: drivers for this device are not installed (Code 28)
    PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
    I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
    Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
    Thank you in anticipation.
    This question was solved.
    View Solution.

    Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

  • All Ports/Plug​ins Do not work. Compaq Presario SR5233WM Desktop PC

    Hello,I am here today With a problem of Mine that I can't seem to fix on my own.I have the Compaq Presario SR5233WM Desktop PC And I have Not used it In about 10-12 months And I have finnaly turned it on to Try and use it for some stuff and I plugged it in the wall And It starts up normally no beeping sounds or nothing.So After I did that I plugged the Blue video cord into my PC and my monitor And Before this I rememberd My USB ports wouldnt work And I could not test them out again because my video did not seem to work,I had asked around and They said something about my Drivers Need Resseting? I kept on Getting different answers when I ask so I came here. So to sum everything Up. How do I reset my drivers Without Video And/or What is the problem and how to fix it with the ports not working..Thanks for your time.

    Hello again ZhayneW,
    Thank you for the updated information on your issue. I would like you to try the steps I am providing you below in order until your graphics return:
    Step 1. As you have tried different monitors I would like you to try different cables. The cables that go from your monitor to your computer could be the issue as well. According to the Compaq Presario SR5233WM Desktop PC Product Specifications page your computer has the IPILP-LC (Lancaster8) IPILP-LC (Lancaster8) and has following I/O ports with number 2 being a VGA connection and number 7 being the USB ports you state do not work. If you are using a VGA cord to connect your monitor to the computer that is the cord I would like to see replaced or swapped out with if possible. If you have already done this move on to the next step and ensure you let me know in your next post.
    Step 2. Turn off the computer and unplug the power cord and open it up and place your had on the power supply for about 30 seconds to drain any electrical charge you may be holding. Now on the motherboard on the front (opposite the I/O connection indicated above) left hand side you will see the following jumpers:
    These are the jumpers you need to use to clear the CMOS on your computer. Now on the off chance that your USB and Intergrated graphics have been disabled in the BIOS I am going to get you to clear the CMOS settings by moving the jumpers to look like the image below:
    Leave the jumpers in this position for about 10 seconds and then return them to their original position. Reassemble the computer and do not plug it in until it is totally back together. If this was successful your computer should boot up and your display should be back.
    Step 3. At this point the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options. You could also go to a local computer repair and look to get it repaired as well.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Compaq Presario CQ56-110US will not load up.

    So.. the moment I press the power button, my Compaq Presario CQ56-110US notebook, will not load up. It only show the Compaq logo screen flashes black them shut down and restarts the process. It never makes it to the Windows login page.

    Hey @rajpodn ,
    Welcome to the HP Forums!
    I understand you're looking for info on swapping out the CPU in your notebook. 
    You will find everything you need here: Compaq Presario CQ56 Notebook PC - Maintenance and Service Guide. The instructions you need start on page 75. Keep in mind that the CPU itself may not be the issue, it could be the socket on the motherboard preventing the notebook from reading the CPU, so even replacing the CPU may not work, as you may need a replacement motherboard. I do not suggest replacing the motherboard as doing so requires HP Proprietary software to reinstall the Service-ID necessary for reinstalling Windows.
    *Caution - If you do install the new CPU be careful with the thermal paste. A small pea sized amount should be more than enough. Put the paste in the exact center and carefully spread so there is a fine layer almost to the edge of the CPU. Remember that the heatsink will press very firmly onto the CPU and spread the paste more and you don't want any squishing out as this can cause electrical shorts if the paste has a high metal content.
    The part you will want is: AMD V140 processor (2.3 GHz, 512-MB, L2 cache, 1066 MHz, 3.2 GT/s)—singlecore 25 W. The part number for this is: 616333-001.
    You can order the CPU directly from HP here: HP Part Surfer, but you may be able to find it cheaper on sites like eBay, Amazon, or Newegg.
    Hopefully this covers everything you're after!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Compaq presario cq56 115dx will not power on blinking lights, not a disk drive problem

    I own two identical Compaq Presario CQ56 115-DX, and the one I use every day stopped powering on.  Shows blinking caps lock light and orange WIFI light does not turn blue to turn on.  The fan powers on, but the screen doesn't come on at all.  I tried hard resetting several times and it didn't work.  I swapped the hard drive of the malfunctioning CQ56 to the other one that was working normally, and it works OK normally.  No hard disk corruption or problems.  
    Any idea how to fix this problem laptop?

    Hey @rajpodn ,
    Welcome to the HP Forums!
    I understand you're looking for info on swapping out the CPU in your notebook. 
    You will find everything you need here: Compaq Presario CQ56 Notebook PC - Maintenance and Service Guide. The instructions you need start on page 75. Keep in mind that the CPU itself may not be the issue, it could be the socket on the motherboard preventing the notebook from reading the CPU, so even replacing the CPU may not work, as you may need a replacement motherboard. I do not suggest replacing the motherboard as doing so requires HP Proprietary software to reinstall the Service-ID necessary for reinstalling Windows.
    *Caution - If you do install the new CPU be careful with the thermal paste. A small pea sized amount should be more than enough. Put the paste in the exact center and carefully spread so there is a fine layer almost to the edge of the CPU. Remember that the heatsink will press very firmly onto the CPU and spread the paste more and you don't want any squishing out as this can cause electrical shorts if the paste has a high metal content.
    The part you will want is: AMD V140 processor (2.3 GHz, 512-MB, L2 cache, 1066 MHz, 3.2 GT/s)—singlecore 25 W. The part number for this is: 616333-001.
    You can order the CPU directly from HP here: HP Part Surfer, but you may be able to find it cheaper on sites like eBay, Amazon, or Newegg.
    Hopefully this covers everything you're after!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Compaq Presario R3000 how to get the sound to work with Windows 7 RC

    1) Download     SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe
    2) Run it, Create a directory  c:\ swsetup 
    3) Once all the Files are extracted DO NOT INSTALL
    4) Now Goto the Start Menu  Click on Devices and Printers, the Click on the Name you have called your  machine this will be marked will a yellow triangle as the sound driver windows 7 has install already is a realtek ac 97 which is not working, 
    5) Once your Machinename  you will see a general tab and and hardware tab select the hardware tab.
    6) Look for the Realtek ac 97  under the Device functions, select that and click properties,
    7) Now tab to the Driver, now click update driver,
    8) Select the option let me pick from a list of devices drivers, now click have disk
    9) Click on Browse  select the following location Swsetup\SP29586\SMAXWDM\W2K_XP and click on  smwdmCH6.inf 
    10)Now the Soundmax Driver should come up select ok and  next. Now your Sound will work
    This question was solved.
    View Solution.

    I am basicaly having the same problem with my labtop. I tried the following above and yet I still have not been able to get my sound to work. I have had some problems with my power and sound cards before but after I reinstalled windows my graphics card and sound card have not been working to their full potential. I thaught that it was a 64 bit graphics card, but now I am not so sure. I had to jostle the power cord in the back till I mannaged to find a perfect spot to keep the computer running. Before the reinstallation I had to put pressure on the left side of the computer to get the sound to work.. but even then it still came in and out.. "The sound that is." I can see the same driver in the codex menue and it is yellow but, what you stated above did not work.
    It says (Cannot continue the hardware update) The wizard cannot find a better match for your hardware than the software that you curently have installed. and then tells me to keep the current software. My sound Icon does not show up when I go to the settings.... I can't play diablo 2 on this no idea why... But my screen is choppy when I scroll through internet sites and it did not do that before. I have a 400mbs connection .... here is my computer information. :Compaq Presario R3000 Intel pent4  2.80ghz    2.80ghz       1.12GB ram and im running on windows xp2 professional.

  • Compaq Presario CQ70 Screen Problems Advice Please

    hi guys I have a Compaq Presario CQ70 and the screen keeps flickering on and off when I move the top of the laptop backwards and forwards (see photo below) has anyone seen this before as its happened on my dads laptop as well (same laptop) so got 2 of them to try and fix lol must be a fault with this model I think.
    any help would be great thanks
    This question was solved.
    View Solution.

    This should work. http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=da&cc=dk&dlc=da&sw_lang=&product=3816... . Hent it and opdater your Computer in windudws opdate

  • Audio driver doesn't work for my compaq presario r4000 notebook XP system

    Hello,
    I just reinstall Window XP on my compaq presario r4000 notebook, and I download
    all the drivers from HpCompaq offical website. But the audio driver
    does't work for my "Conexant AC-Link Audio
    (PCI\VEN_1002&DEV_4370&SUBSYS_3085103C&REV_01\3&13C0B0C5&0&A5)".
    Please help me to figure it out.
    Thanks!!
    This question was solved.
    View Solution.

    OK...
    Now we have to get creative! 
    Download and install the free 7-Zip utility.
    http://7-zip.en.softonic.com/
    Download this driver:
    http://h20000.www2.hp.com/bizsupport/TechSupport/S​oftwareDescription.jsp?lang=en&cc=US&swItem=ob-317​...
    Decompress driver audio Conexant CX20468-31 AC97 and Equalizer with the 7-Zip software.
    Once installed, do a right click on the file sp30578.exe, select 7-Zip/extract the files and then click OK.
    Force the installation of the driver manually:
    In the device manager, right click on the audio controller, and select Update driver.
    Select install from a list or specific location Do not search. I will choose the driver to install.
    Click on next, Have Disk, and browse.
    Select the cpl3085a.inf file in the uncompressed folder sp30578, and then click Open.
    Click on OK, next and finish.
    Restart the computer.
    Paul

Maybe you are looking for

  • Animated gif don't see

    Hello: I have imported an animated GIF in Director MX and when I drag to the stage I don't see the image in the stage (only an empty square) In the cast I see the first image of the animated GIF. I imported with the Menu Insert/Media Element/Animated

  • Itunes 9.0.1.8 Error -3259

    Since Itunes 9.0 I can't download the music I bought ! Same problem with the new release 9.0.1.8 ! Everytime same error 3259 ! Nothing has been changed on my computer ! Also Can't see video preview ! Give my money back !

  • Changed email... Cant log in now?

    I changed it an hour and a 1/2 ago... still cant log in.  I recieved the email about the change on my old and new email accounts.. it says this when I try with my new email The email address and password entered are not in our records. Please check f

  • Item-level targeting failing intermittantly

    We have an OU with a GPP that pushes autologon keys for our KIOSKS.  The gpp works by initially logging in with a kiosk user account that matches the name of the computer account and then the GPP sets the autologon keys and after a reboot or logoff t

  • IDOC segment attributes confusion....

    Hi ABAP Gurus, I have doubt realted to IDOCS. I was looking at the attributes of one of the IDOC segment. There are three things: 1) Mandatory Flag, 2) Minimum Number,3) Maximum Number Now in this particular segment I found: Mandatory Flag: Not set M