Will a DM 2000 be able to fulfil the tasks of a Mackie Control?

Hi guys,
I have the opportunity to get a used DM 2000 and I'm very willing to buy it, especially because it facilitates monitoring and routing tasks in my studio.
Does anybody know about the quality of preamps and converters?
I'm wondering if the DM 2000 could replace my Mackie Controls (I also have a C4)?
BTW, how far should I go with the price?
Thanks for your opinions,
Eddie

The DM2000 is a great board.
Quality of the pres and converters are far above average for a digital board. They're no Neves or SSL's, but they're clean and very high quality.
The DM2K gives you full control over all major DAW systems (Pro Tools, Logic, etc.) It will more than replace your Mackie Controls. Sell them on Ebay.
The on board compression and EQ aren't half bad either.
If the board is in great shape, whoever is selling it could easily get 15 grand for it. Wouldn't go higher than that. You could probably do lower though.

Similar Messages

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

How can i able to see the Task in CWB Administrator page

Hi Everyone,
Hope everybody is doing fine !
Here i'm requesting for help in CWB administrator setup, i have done the CWB setup as required like;
1. Defined Plan Years
2. Defined Life Event Reasons.
3. Defined Plan Type.
4. Defined Plan. (4.1. Defined Task within Compensation Workbench Tab)
5. Defined Plan Enrollment Requirements.
6. Defined Standard Rates.
7. Run Program "Participation Process: Compensation Workbench"
8. Found require employees processed sucessfully from log.
9. Loged in as Manager/Administrator > Open Compensation Workbench Administrator page
10. Found message "There is no Task for Employee"
So could anybody please help me, how can i able to see the task work sheet in CWB administrator page.
Regards
AshokP

Hi Avinash,
Thanks For Your Response,
I have created task in Plan window (Navigate to Details > Compensation Workbench (Select Task Type) with Full Access.
So could you please advise me, whether i'm skipping any step as you have been stated like Task needs to be define under 'Plan Enrollment Requirement Window'
Thanks
AshokP

Will licensed Aperture 3 be able to import the trial library?

I assume this is the case, but since the trial can't upgrade Aperture 2 libraries.
Can I start using the trial and fill the Aperture 3 trial library and then import this once I get the license?
Or is the trial library only a trial library?

On the reverse note, Any idea of whether the limitation on the trial not being able to upgrade v.2 libraries is a safety feature that can be overridden? I will be upgrading as soon as my local university bookstore gets it in, but thought I would get a jump on using Aperture 3 with the trial. I don't want to just import since I would have to reprocess all my photos with the new imaging system.
So, I duplicated my old Aperture library (in case I wanted to go back) and then tried upgrading, but it wouldn't let me. I then tried changing the Aperture.plist to be the original v. 2 library, still didn't work. It kind of feels like this might just be a safety feature since if you upgrade a library, you can't go back to the previous version if you decide not to buy v. 3, but I can't figure out how to work around it. Any ideas?

Suddenly, Firefox will not launch. When I try with the Task Manager up, it never appears on the list of applications.

On a desktop PC running Windows XE, FF will not launch. Has been working very well since we installed FF two weeks ago and made it our default browser. IE launches normally allowing me to post this question. On my laptop, on the same wireless connection, FF works fine. I have rebooted several times. Everything seems normal except for FF. I have run PC Doctor and have fixed all problems that came up. McAfee finds no problems.

Update: After a very long time, perhaps 15 minutes or more, the FF screen comes up blank with the "loading..." message on the first tab. Also, because I tried several times to launch FF, more such screens came up with the same result. My home page never loads. If I stop page loading and try another web site I get the same result.

Firefox will not open, it is not running in the task manager, but when I click on the icon, it will not open a firefox screen.

I have tried uninstalling the program, so that i could re-install it, but during the uninstall it says i have to close the currently open firefox page, But there is no page opne. There is no page in the lower left corer of my screen, and when i opne task manger, it does not say that firefox is running. I have tried updateing firefox on the website, but during the update it says the same thing, that firefox is running, and i need to close it. I can not get firefox to opne, and i hate using internet explorer, PLEASE HELP!!

In the Task Manager, make sure to check both the Applications tab and the Processes tab. On the Processes tab, Firefox may have two different components running: firefox.exe and plugin-container.exe. Well, in 3.5.11, it would be only the first one.

Anyone been able to get the sap.ca.ui.FileUpload control working with a Gateway OData service?

Hi,
I have been trying to get the sap.ca.ui.FileUpload control working with an OData Gateway service, specifically /IWPGW/TASKPROCESSING which is the service used by both Fiori Approve Requests and the Unified Inbox.
I have looked at the sample application in the Explored at SAPUI5 Explored
I have managed to replicate that and get it to work, but as soon as I switch it from a JSONModel to an ODataModel I get javascript errors from within the setModel method of the control. I have redefined that method and corrected the errors, which enables me to get a bit further, but then I hit more errors, and other strange behaviour.
Either I am doing something completely wrong, or to me it appears as if this control is still extremely buggy and maybe either not designed to work with an ODataModel, or just hasn't been tested using an ODataModel. I'm hoping it is my mistake.
So has anybody out there successfully managed to use this control connecting it to a Gateway OData service? If so please share your experience.
Thanks,
Brad

Hi Pauline,
Same issue I had, I switched to using a sap.m.list and handling the press as follows:
attachmentsList.bindItems(workItemPath + "/Attachments", new sap.m.StandardListItem({
                           type: sap.m.ListType.Active,
                           title: "{FileName}",
                           description: "{CreatedByName}",
                           icon: "sap-icon://doc-attachment",
//                         counter: "{FileSize}",
                      info: {path : "CreatedAt", formatter: dateTimeFormatter},
                      tap: function(oEvent){
                            var oContext = oEvent.getSource().getBindingContext();
                            var media_src = oContext.getProperty().__metadata.media_src;
                            sap.m.URLHelper.redirect(media_src, true);
                    }), new sap.ui.model.Sorter("CreatedAt", true));
So sap.m.URLHelper.redirect(media_src, true); is what loads the attachment.
See the full function handler:
function(oEvent){
function(oEvent){
              var oContext = oEvent.getSource().getBindingContext();
              var media_src = oContext.getProperty().__metadata.media_src;
        sap.m.URLHelper.redirect(media_src, true);
This should be enough if you only want to list and display the attachments, then you don't really need the FileUploader control as that is more advanced and handles upload, display, change and deletion of files.
I only needed to upload and display files, so I used a list to display it and created a separate upload button using the sap.ui.unified.FileUploader control.
Hope that helps.
Cheers,
Brad

Itunes will not open (only a brief moment in the task manager) windows 7. I updated to 11.0.4.4.

hello,
two nights ago I updated itunes to 11.0.4.4 so I could sync my Iphone, but now it wont open at all... only a brief moment in the task manager. i tried to uninstall and reinstall and updated every driver that i have and update Quicktime, but no luck. Also it opened in safe mode but was unable to sync or play any music. please help me!!!

Hello Atlas_j78,
There are a few additional things that you may consider checking out in order to get iTunes back up and running again.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/TS3430
All the best,
Allen

I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
http://support.apple.com/kb/ht1766
Don't worry! Everything should be back to normal if you follow these steps.

When I download something on my iPad will be loaded into the same thing on my iPhone. yes i have the same Apple ID but you'll surely be able to have the same Apple ID or?

When I download something on my iPad it will be loaded into the same thing on my iPhone. yes i have the same Apple ID but you'll surely be able to have the same Apple ID or?

Automatic Downloads...
http://support.apple.com/kb/ht4539
Settings > Store > Automatic Downloads > Music/Apps > On

HT1296 Hiya, I am thinking of buying my first Apple Ipod the new 32gb Ipod Touch. Will I be able to import the music that I currently have in the form of CDs and other music not purchsed from Itunes and if I can how do I go about doing this? I have heard

Hiya, Im thinking of buying my first ipod the Ipod Touch 32gb model. Will I be able to transfer the music I currently have stored in the form of CDs and already on my laptop onto the Ipod and if yes, how would I do this? I have heard from some friends that Apple and Itunes is notoriously limited in the types of formats that are accetable? I dont want to pay £249 on an Ipod only to find that Im locked into buying all my music from Itunes and I cant use the music that Ive already paid good money to buy from other sources. Many thanks for any help and advice that you may give me?

Many thanks JEM24 for your help. Ive just spent the best part of six hundred pounds on a new Sony Rx100m2 compact camera, so I have no interest in the Ipods camera at all really. I doubt Ill be watching many videos on it as Im very lucky in that I have a good Android tablet. Its more as a stock music player that Ill be buying the Ipod for, if indeed I do end up buying one. I dont like the idea of paying the exorbitant amount added for more memory space that Apple along with most other companies charge. In fact I read an article on this very subject just yesterday in the tech section of Flipboard. It stated in the article that in the case of the Iphone the actual cost of each additional gigabyte of storage to Apple et al is something in the order of 60p.. This is certainly not reflected in the price us the customer has to pay at the till.. Its for this reason primarily that Apple in particular, because their products do not allow adding expandable memory of your own in the form of cheap to buy cards, that nobody in their right mind buys the 64gig etc Iphones..I am aware that we are discussing my potential purchase of an Ipod Touch here but you see my point. Many thanks again though for helping me.

Will USB-6008 DAQ be able to power and record voltage for UMS T5 tensiometer at the same time?

I would like to use my NI USB-6008 to provide power to my UMS T5 tensiometer (http://www.ums-muc.de/en/products/tensiometer/t5.html) as well as take readings from it, but I don't know if this is possible to do properly. The supply voltage for the instrument can be as low as 5V, which I can easily get from the dedicated +5V channel. I am able to power the instrument and connect it to an analog input on the 6008 and measure a voltage in differential mode. However, while reading the support literature for the instrument, I find the following:
"Potential data acquisition pitfalls: Because the pressure transducer is configured in a Wheatstone full bridge, the input voltage and signal mV output cannot be connected to the same reference (ground). Hence, the signal mV output can only be measured using a differential voltage measurement. Therefore, do not attempt to make a single-ended measurement of the pressure transducer mV output." (http://www.decagon.com/assets/Uploads/MeasuringUMSTensiometerswithnon-UMSControlandDataAcquisitionSystems.pdf)
My understanding is that the 6008 can take a differential measurement if I attach the signal "+" and signal "-" to the positive and negative analog input terminals. However, it seems that all of the Ground ports on the 6008 are grounded to the same reference, which would make my voltage measurement invalid according to the paragraph above. So my real questions is: if I attempt to record the voltage using one of the analog inputs on the 6008 in this way, is the measurement valid? Or do I need to find a separate power supply with a different reference ground to ensure that the measurement is accurate?

The specification sheet for that device is very poor. The manual is not much better. Companies which want to sell scientific equipment should publish decent data sheets or get out of business.
In section 3.4.3 General requirements the device is described as a "non-amplified bridge circuit." This information along with the bridge impedance should be in the specifications because it is essential to applying the device under any circumstances other than the nominal behavior at 10.6 V.
The answer to your question is this:
You can use it with the USB-6008. The 5 V power supply will result in output voltages slightly less than half (5/10.6) the voltages specified under nominal conditions. You can use the differential input mode on the USB-6008. The absolute input voltages will be about 2.5 V with the 5 V supply. That voltage is within the working range of the device. The differences will probably be less than 100 mV. The resolution of the USB-6008 on the +/-1 V range is about 0.5 mV so your pressure resolution will be around 1 % of full scale. The input impedance and termination voltage of the USB-6008 will introduce some errors. These may be on the order of 5-10%. I cannot predict much better without the missing bridge impedance specification. Those errors should be systematic and relatively constant. A calibration of the whole system - sensor and DAQ device together should allow you to compensate for much of that error.
Lynn

I tried to purchase music at iTunes with the iTunes card I was given. I was able to redeem the amount and it shows on my apple Id I have $25 but it does not pay my purchase it will still go to my credit card and bill it. It did not give an option.

I tried to purchase music at iTunes with the iTunes card I was given. I was able to redeem the amount and it shows on my apple Id I have $25 but it does not pay my purchase it will still go to my credit card and bill it. It did not give an option.

If you were instructed to call them, then that's what you should do. They will probably need to verify your identity before helping you with the security question.

HT3406 If I choose "restore from iTunes backup" to move everything from old phone. Will I still be able to use the old phone for music and apps? Can the old phone be docked up to the computer? Or will the new and old phone overwrite each other in some

If I choose "restore from iTunes backup" to move everything from old iphone to a new one, will I still be able to use the old phone for music and apps? Can the old phone be docked up to that same computer every now and then? Or will the new and old phone overwrite each other in some way? In other words, are the two phones treated as different devices when the "restore" option is used to set up the new phone? Thanks in advance.

Yes, you can use the old iPhone as an iPod touch.
Read this:
http://support.apple.com/kb/HT3406

If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?

System has begun crashing (dropping-windowshade, message to shut down computer) during attempted capture or render. Hardware has been checked out and is OK. Other OS functions seem to be working. I have a bootable clone from the most recent period of good function, and also my original install disc for FCE.
If I need to try reinstalling FCE, are the updates still available from Apple?
If I can't restore FCE 3.5, is there anything I can use with my OS 4.11 MBP that will be able to access my FCE 3.5 project files? My 3+TB of underwater clips, stored on external drives as QT movies?
Any guidance appreciated. This forum helped me out a lot when I first started - didn't expect the end to come so soon & hope there's a feasible workaround!
Thanks,
Sharron S.

If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?
Yes, via Software Update
Here is an article on how to Uninstall FCE HD You could also use FCS Remover (note there are different versions depending on what version of OS X you have - be sure to select the correct version)
If I can't restore FCE 3.5, is there anything I can use with my OS 4.11 MBP that will be able to access my FCE 3.5 project files?
- FCE project files - only usable with FCE or FCP. Not iMovie or FCP-X
- All your clips, however, can be used with almost anything including iMovie, FCP, FCP-X, QuickTime, etc.

Will a DM 2000 be able to fulfil the tasks of a Mackie Control?

Similar Messages

Maybe you are looking for