Will a G3 work with new lcd displays?

I have a blue and white power mac g3 that is running an avid media composer system. Currently it is running two tube monitors. Can I run two lcd screens off this system. Ideally two 30" or two 23".

You could replace the graphics card with the ATI Radeon® 9200 MAC Edition RoHS 128MB PCI
<http://shop.ati.com/product.asp?sku=3170811>
That can run two displays, but one would have to use VGA, so could not be an Apple LCD. You could use two cards to get two DVI ports, but the performance would be lower. There are no cards for your Mac that will run the 30" display.
A G3 is going to be very slow anyway for graphics, since it does not have array instructions.

Similar Messages

Will iwork '08 work with new lion operating software?

I have snow leopard, but wondering if I will be able to use iwork '08 with it?
Is there an update for iwork '08 with lion to give me some of the new features, such as versions?

You have to purchase iWork '09 in order to upgrade. You can purchase each application or the entire package through the Mac App Store.
The version you have should still work with Lion.

Will 30g iPod work with New Nike product?

I recently purchased a 30 iPod video. I would like to know if the new Nike system works with it as well as just the Nano. The Nike site only lists the Nano as a requirement.
Mac Mini Mac OS X (10.4.7)

Hello, I don't have a direct answer for you, but I can give you some advice. I'd highly recommend you NOT go jogging with your 30GB iPod (or any iPod with a hard drive). The jarring motion of the legs hitting the pavement (or what have you) can cause the hard drive to crash (the read/write head slams into the platter of the hard drive and will damage it, causing the hard drive to fail).
However, if you can catch it when the disk is not spinning,(running only when the disk stops spining, there's cache that puts 25 minutes into memory so the disk doesn't have to spin) you may be ok, but to be on the safe side, I'd go against that as well.

Question;Will Toast Titanium work with new'SnowLeopard?

So I do have Toast 7.....will it work? do I need some kind of 'upgrade on my Toast Titanium for it to work with Snow L??? thx in advance! Larry

I've burned a couple of CDs with Toast Titanium 8 with success since installing SL. Haven't tried DVDs yet. However, I had no luck with Tivo Transfer portion of Toast 8. Sounds like that is what other users are experiencing as well. I might have to bite the bullet and upgrade to Version 10.

Will FCP 7 Work with New Mac Pros?

Any indication of I will still be able to work in FCP7 on the new Mac Pro 2013? I'm not too keen on FCPX at the moment. Thanks for any info.

All true, however, FCS 2009 (aka FCS 3) does run with the current OSX (10.8.4) which is two full versions beyond the last supported one (10.6.8).
So, the real answer is, we'll have to wait and see how things play out.
x

Will PS apps work with new MS sideloading program

I came across this page ( xxx.aidanfinn.com/?p=16266) outlining the changing sideloading policies MS will be enacting on May 1st. Firstly, may I say "thank you!" to MS for remembering that small developers are important ;) . so for those who haven't
seen it, here's a brief summary from the page:
" The ability to distribute custom apps via Enterprise Sideloading is added to Windows 8.1 Pro via the Windows 8.1 Update.
The license for Enterprise Sideloading is free to those larger customers that are enrolled to an applicable large customer volume license agreement.
Anyone else can get the Enterprise Sideloading license for an unlimited number of devices for $100 through an Open volume license program."
There are a few caveats and requirements, but all in all this is great news as it looks like $100 will allow smaller developers like me to be able to sideload custom apps. Again, thank you MS! So the question is will I be able to install Project Sienna apps
via this method? Are the sienna executables hard wired to look for developers licences or other 'gotchas' that will prevent me from using this tool to create exe's that I can sideload under these new policies? Thanks
slowly getting my mind around .NET...

Well, the day has come and there is no readily available information on the MS Open Licensing site as of this writing. Could someone please share a link to the program info or a link to a purchasing site? thanks
slowly getting my mind around .NET...

Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter?

Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter? I like to have two monitors and currently using an Cinema Display from 2005. Thanks

If your computer does not have Thunderbolt you cannot use a Thunderbolt display. There are no adapters that will help.

Office 2011 will not open in OS 10.9 with main user -- works with new user. Suggestions??

Office 2011 will not open in Mavericks with main user -- works with new user. Suggestions??
I've tried removing Office 2011 completely and re-installing to no avail.

Unfortunately, my experience with Office is that somethoping will get corrupted in your account that prevents it from running. I have never figured out what exactly needs to be removed to make it work again.

ATI display driver fails to work with new kernel

Hi,
I've just upgraded from
OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64
to most current
OEL kernel-2.6.18-194.11.4.0.1.el5.x86_64
and got the problem with ATI display driver. Whenever I perform kernel upgrade, I have to recompile vendor-provided ATI display driver downloadable from AMD/ATI site, because system ATI driver, provided by OEL/RHEL as kernel module, doesn't work properly (too slow). I did that hundred times and never had a problem. This time the problem is that after upgrading to new kernel and recompiling the existing ATI display driver (Revision 10.8), it doesn't work anymore, even though it worked perfectly with previous kernel. I cannot even start X11 (glibc problem reported with stack traces!!!). The newest ATI display driver (Revision 10.9) "works" with new kernel, but display is awfully slow making any serious work impossible. It is even slower than system-provided ATI driver.
I am pretty sure the problem is in new kernel. As I have no backup of old kernel files and couldn't download the previous OEL kernel files from ULN, neither binary nor source (the files do not exist on ULN anymore, only the recent kernel files), I downloaded the previous kernel source from ftp.redhat.com, compiled the kernel and downgraded to it, recompiled ATI display driver, and everything works properly and fast as before upgrading. I can remember that ULN site used to have all kernel versions prior to actual one and cannot understand why Oracle dropped this practice. As I have an ULN account, I certainly want to have OEL patched kernel.
My question is: does anybody know how and where I can download the previous OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64 binary rpm files or at least source rpm file?
Maybe Sergio or Tommy can help?
Thanks in advance.
NJ

I have experienced the same with Ubuntu some years ago - specific feature (hack?) that was implemented in the kernel was deprecated. This was used by the display driver for an onboard Intel graphics chipset. Beryl (which was subsequently merged with Compiz) turned into a horribly slow experience. As far as I recall, a subsequent kernel patch "fixed" things as a number of users were affected, of which many complained very loudly.
Anyway, I think the lesson here is that OEL is not really the correct distro to use for a desktop. A broken ATI driver for the OEL kernel? Does not really feature in the scheme of things for OEL support. Oracle Grid/RAC/Enterprise/Standard Edition do not care. Oracle's application servers (Apache, Weblogic, etc) do not care. Etc.
Sure, GUI desktop access to an OEL server is needed (like when running dbca or an installer) - but that can easily and effectively be done using vncserver for example and running twm.
You may be able to fix/work-around the problem with the current kernel update.. you may be able to roll back the update. But what about the next time when some other component does not work after a patch or an update? Surely it is a lot less stressful and frustrating to rather use a desktop distro, like Ubuntu, instead?

I am using InDesign CS 3.0.1 with Windows XP. I am getting a new computer with Windows 8.1. Will my version work with this? If not can I get an upgrade?

I am using InDesign CS 3.0.1 with Windows XP. I am getting a new computer with Windows 8.1. Will my version work with this? If not can I get an upgrade?

Probably won't work. You can buy a full license for CS6 which is already two versions and soon to be three out of date or you can subscribe to Creative Cloud.

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

Will Robo Form work with any of you new browsers? I am still running FF 3.6 and will only upgrade if RF works.

Will Robo Form work with any of you new browsers? I am still running FF 3.6 and will only upgrade if RF works. I tried the browse after 3.62 and it did not support Robo form so I uninstalled it

Hi there! Actually, Roboform works with modern versions of Firefox. Please update to Roboform 7.9.0, and update Firefox to version 22 immediately. Continuing to use Firefox 3.6 is leaving your computer at risk for MAJOR security holes, plus known stability and performance issues. Please update immediately.
Also, Firefox will work perfectly fine with XP SP2, but there is no reason why you shouldn't update XP to SP3

Will Apple Pay work with a new iPod Touch

Will Apple Pay work with a new iPod Touch?

No. Only the iPhone 6 and iPhone 6 Plus have the necessary hardware chip (called NFC) to use Pay.

Will a G3 work with new lcd displays?

Similar Messages

Maybe you are looking for