Will a HP-OW120F13 Power supply work with a DV7T-7000? It is from a DV8T-1100

I just purchased a DV7T-7000 to replace my old DV8T-1100. I had purchased an extra power supply for when I travel. The power supply is a HP-OW120F13 Replacement spare part # 463953-001. The output on it is 18.5V 120W. The power supply that came with the DV7T-7000 has a output of 19.5V 6.15A.
Can I use this power supply with the DV7T-7000? The plug to the laptop is the same.

Hi @dfuerstenau ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Similar Messages

  • Will this power supply work with my PC?

    Will this power supply work with my PC?  I have a Compaq Presario SR5816F
    http://www.newegg.com/Product/Product.aspx?Item=9SIA4CP1GF8726&cm_re=power_supplies_500w-_-9SIA4CP1G...   
    http://www.amazon.com/Solid-Gear-Series-ATX12V-SDGR-500BX/dp/B00FF7VEJE
    This question was solved.
    View Solution.

    JCGood1984, welcome to the forum.
    The computer should take a standard ATX power supply unit (PSU).  I suggest measuring the existing PSU and compare the measurements to the one in the links.  If the measurements are the same, it should fit.  I don't know anything about the brand, however.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Will This Creative Power Supply Work With The Apple iPod Ser

    I am going on a trip and i am incharge of mp3 players and charging unfortunately i am the only one who has a Zen and every one else has an iPod so.... will this Creative Power Adaptor Work with all/some iPods Thx wbnghiMessage Edited by wbnghi on 06--200709:36 AM

    I've never used an iPod, but don't they charge through their docks?
    I doubt if it would work- very few Mac products are designed to be compatible with PC devices.

  • Will a 65w power supply work with the HP Envy 15t (which comes with a 90w)?

    I have multiple extra 65w power supplies from previous machines.  The pin that plugs in to the machine is different, but there are converters to get the right size pin.  If I get that right pin, is it safe to use a 65w power supply with the HP Envy 15t, which came with a 90w supply?
    One supply (65w) says the output is 19.5v, 3.34a.  Found another extra (90w) says the output is 19.5v, 4.62a.
    The one supplied with the Envy says (90w) 19.5v, 4.62a.  I'm assuming with a pin converter, I can use the second one above?

    Hi,
    For the 65W, It will work, BUT check the tip/connector. The only problems: battery charging could take longer time and for high graphics task it may display an error message. For the 90W, again pin/connector is the main concern.
    Regards. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Netra 120 - Will a SunFire 120 Power Supply Work?

    Thanks in advance for any help with this question.
    Will a SunFire v120 AC power supply fit/work in a Netra 120?
    I dont have a DC power source for my Netra, and would like to replace the DC power supply with an AC one. Will one from a SunFire v120 work?
    Alternately, anyone know a cheap DC Power source that would work to power the server?
    -allan

    In answer to my own question, yes. I put the AC power supply from a SunFire v120 into the Netra 120 and it works just fine. This is probably the only difference between the two servers.

  • Mini power supply works with Video iPod?

    Will the power supply that came with my iPod Mini work with the new 80GB Video iPod, which didn't come with a power supply? The adapters are the same but I don't want to fry the video iPod.
    Thanks,
    Brett

    Yes, it will work just fine.

  • Will this power supply work with a k9n6pgm2-v2

    KINGWIN Lazer LZ-750 750W Modular 80 PLUS Certified

    Quote from: Henry on 06-May-10, 12:36:25
    You would be better off getting the Corsair TX650W single rail +12V~52A at newegg. Fresh price today, buy it now as it's the lowest cost it will ever be and where you live you'll get it in 2 or 3 days. It will take about 9-10 weeks to get the rebate, at least that's how long it took for mine.
     $70, compare that to the price (almost 1/2) of the Kingwin and you'll be getting a much better PSU with the same 52A +12V total output.
        $89.99
        ($69.99 after $20.00 Mail-In Rebate Card)
        Free Shipping*
    Edit:
    Just ordered the "Corsair" through eghead, thanx!
        $119.99
        $10.18 Shipping*    That Kingwin at newegg

  • Will PFC power supplies work with SIMULATED sine wave inputs

    Will PFC power supplies work with a SIMULATED sine wave input from a UPS unit?

    Not sure whether you really meant "PPC" and have never heard of a PFC power supply, but if your question is whether a Mac PPC computer will run on a UPS, then the answer is definitely "yes" as my machine has shown twice in the past 12 months and several times in the past on the G5 tower and with a G3 B&W.
    I haven't dragged the old analog scope off the shelf to see what the UPS output really looks like, but I suspect it is no dirtier than the mains power in my neighborhood.

  • Will this video card and power supply work on my computer? HP Pavilion p6213w Desktop PC

    I have a HP Pavilion p6213w Desktop PC, will this video card and power supply work on my computer?
    Video Card: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=8379339&sku=A455-0760
    Power Supply: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4668507&sku=C13-2511
    Any help is greatly appreciated, thanks.

    It is unlikely that the power supply will fit/work in your HP Pavilion p6213w Desktop Computer. Please consider the Corsiar CX500, CX500M, CX600, and CX600M for your power supply needs. These power supplies are the same physical size as the factory unit and are known to fit and work in most HP full-sized consumer desktop computers.
    There is a chance that the GTX 760 and other current generation video cards may not work in your computer. These newer cards typically require the computer to support the most current UEFI standards and many motherboards don't meet this criteria. Please know the return policy on any video card you purchase, in case it doesn't work. If the GTX 760 doesn't work, consider the GTX 650/660 Ti or equivalent AMD graphics card for your graphics card needs.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Will my airport extreme 2nd generation work with docsis 3.0 cable modems?

    Will my airport extreme 2nd Gen work with docsis 3.0 cable modems?

    RRoger, everything is working fine.
    So, what is the actual problem here?  You are now wondering if the Vonage can handle the speed from the modem? Is that the "problem" after all this discussion?
    now I am wondering if my current setup will allow me to get docsis 3.0 speeds.
    What speed is your Internet provider delivering to you?
    The AirPort Express uses 100 Mbps Ethernet ports, so it will handle up to 100 Mbps. We have already told you that.
    Vonage likely does the same. The answer is almost certainly "yes" .......both the Vonage and AirPort will handle the speed from the modem.
    If you want to double check this, please provide the model number of the Vonage,  and we will try to look up the specifications for the device. If you have documentation there with specifications for the Vonage device, check to see if the Ethernet ports are listed as 10/100. This is standard with almost all devices, with some of them handling even higher speeds 10/100/1000.
    Chances are, your network will handle a lot more speed than your service provider is supplying to you. So, the "choke" point on your network may very well be your service provider and modem......not the Vonage and AirPort.

  • Do both of Apple Store's iPod power adaptors work with the new Touch 2G?

    Hi,
    Many thanks in advance for your attention.
    Looking to to get an Apple USB power adaptor for the iPod Touch 2G.
    In the Apple Store, two are listed, one smaller (and newer) than the other. In the newer one, the prongs are not retractable; in the larger (older) one, they are.
    1. Does anyone know if the larger (and older) power adaptor works with the iPod Touch 2G USB-only interface?
    2. I know that many power adaptors and speakers and car adaptor sets, etc. in the past had a combo Firewire/ USB power interface. That is why the new iPod Touch 2G (or iPhone 3G) does not charge up or power up with these speakers and chargers, etc. (Speakers such as the original Bose Sound Dock).
    3. Is it true that the older (larger) power adaptor works better in all kinds of power situations (different outlets, etc. in different countries); that the older (larger) power adaptor is more travel-versatile? The Apple store perhaps notes a difference, noting that the newer power adaptor works only with USA-style outlets. I see no such note with the older adaptor.
    4. Finally, does anyone know of a USB-only interface that would work with the iPod Touch 2G that is not Apple's (and perhaps not as insanely priced)?

    Many thanks for further clarifying.
    I don't know 100% for sure that the Apple USB cable for the iPod Touch is different than the Apple USB cable for the iPod Touch 2G.
    But:
    I have read (somewhere) that the tiny pin connectors are different. That is why an iPod Touch 1G could be charged by (for example) a Logitech mm50 Speaker set and an iPod Touch 2G cannot.
    An iPod Touch 2G can still connect to the Logitech mm50 Speaker set. It will still play and you will hear music. But it is no longer charging. And I have read of iPod Touch 2Gs getting very hot in these cradles. That can't be good for the poor iPod in the long run.
    So for the Apple USB power adaptors to work, (which both came out before the iPod Touch 2G), they must have some override or blocked pin if they can work with both generations of iPod Touches.

  • Will all of the CS4 programs work with Terminal Services?

    I think the title sums up my question...
    Will all of the CS4 programs work with Terminal Services?

    You should be able to solve that problem.
    MiFis have a default power setting on them that turns off the device after XX minutes of no use (As determined by the MiFi).  You can find and modify this setting in the MiFi Admin webpage.  It should be under the advanced area and can be configured to leave the MiFi on all the time.
    That being said, no MiFi model will behave very well as an always on home internet replacement device.  Dedicated home cable routers and modems will always perform better, they are designed for that scenario.  By comparison MiFis are designed to be light weight travel devices, they simply do not have the hardware necessary to be left online all day long with acceptable results.  MiFis are more appropriate as a backup, mobile or temporary internet solution.
    If you are looking for a home internet always on internet connection device you would be safer going with stronger hardware like a USB Modem+CradlePoint router, the VZW 4G LTE router or VZW HomeFusion.  Any of those devices are going to provide you with a better experience for your home than the MiFis without additional equiptment like boosters and antennas.  Some CradlePoint routers can be expensive but perform very well, the 4G LTE router has mixed review and the nice thing about HomeFusion is the special data plan and high powered equiptment.

  • HT3290 Will my Sony Handycam DCR-SR68 work with I-Movie

    Will My Sony Handycam DCR-SR68 work with I-movie for downloading video? I was able to get the photos I had on it to download onto I-Photo, But I want the video to download also, so I can edit them and burn to a DVD. Please Help, this is driving me nuts!!!

    According to the iMovie Supported Cameras List, your camera should work with iMovie 11.
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    You would need to connect the camera via USB, and the camera would need to be plugged in to AC power (not batteries only). Then use FILE/IMPORT FROM CAMERA. The camera probably needs to be put in Playback mode, but some cameras need to be in PC Attach mode. Check your manual.

  • Will Office Web Apps Server 2013 work with SharePoint 2013 sites hosted in SP2010 compatibility mode?

    We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
    So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
    I found a similar query from March 2014 found here 
    http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281 
    Has there been an update released to resolve this
    Cheers D

    Hi  ,
    According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
    For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

Maybe you are looking for

  • Follow-Up from Oppt to Agreement -  CL_BT107M_O_MAINWINDOW_IMPL= IP_CREATE

    Hi, While creating a follow up document from Opportunity to Service Agreement the system is not copying the data. I have already maintained the Copy Control Settings. but i still get error message the source type is not compatible. An exception has o

  • Calendar no longer syncing with iphone after IOS5.

    The appointments in Outlook are no longer syncing with my phone after installing IOS5.  I've uninstalled/reinstalled iTunes.  The itunes add-in in Outlook is disabled and no matter how many times I enable it, it disables.  I've reset my phone.  I've

  • Acrobat X pro do not convert docx to pdf

    I use a Windows 7 computer and installed Acrobat X pro. Recently I tried to convert a docx to pdf, but the list of compatible extension does not have Microsoft word. I wonder why it went missing. I was able to do this conversation before in this comp

  • [SOLVED] Conky lua problem (transparency)

    Hi, I'm trying to transfer my conky from Ubuntu to Arch: below is a screenshot of the Ubuntu version (what it should look like).  On Arch I have a solid black background.   If it's relevant, I'm running Archbang rather than pure Arch, so with Openbox

  • Change default setting for search highlight?

    Is it possible to keep the highlight feature in the search (RH 7) enabled, but change the default for the Highlight search results box to be unchecked?