Will a HP Pavillion 500-569 support a gtx 750ti or gtx 970 mini

Hello. Will this computer(HP Pavilion 500-569) support a geforce gtx 750ti or a geforce gtx 970 mini if they fit into the case? If so will I need to do anything additional(other then put a new power supply with reccommened wattage etc) before/after I install it? I have read about some issues with UEFI and other factors on other graphics cards on HP and other computers not supporting certain cards and I want to be 100% sure. Thank you so much
http://www.futureshop.ca/en-ca/product/hewlett-packard-hp-pavilion-500-intel-core-i5-4590-1tb-hdd-8g...

Hi,
The HP Pavilion 500-569 only has a 300 watt power supply. The NVIDIA 750ti should work if it's not a model that requires an auxiliary six (6) PCI-E power connector.
The NVIDIA GTX 970 will require that a bigger power supply be installed in your PC. The Corsair CX600 would be a very good choice for a power supply.
Open up your PC and do some measuring in parallel with the PCI-E x16 slot to see how long of a video card will fit. The slot adjacent to the PCI-E x16 slot needs to be vacant. Look carefully at the motherboard and makes sure that components on the motherboard don't interfere with the installation of the video card. Review this posted article.
HP Secure Boot Windows 8 Topics Computer Does not Start After Installing a Video Card (Windows 8)
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

HDMI & Pavillion 500-242ea

I have just bought a pavillion 500-242ea with an amd radeon hd7560d graphics . There is an hdmi port which I have connected to my tv but the tv says there is no signal. I have no trouble connecting a differnt desktop and my laptop to the tv. Could anyone say why this desktop will not connect to the tv please?

rb241 wrote:
Hi Erico,
I apologise - I did read your email but have obviously misunderstood. I have just bought this computer. I made it clear at the store that I wanted to plug it into the TV so that I can stream video to the tv. They assured me that I could using the hdmi connector. That part is true. They did not include the fact that you could not use integrated video and the video card at the same time. Perhaps you did not ask the right question.
It is not clear to me what you mean by saying that the graphics on the motherboard is disabled if there is a graphics card. You said: An installed video card disables the motherboard's onboard video ports. The ports do not seem to be disabled as my monitor, which is plugged into one of those ports, is working. What I stated is a direct quote from the specifications.
Are you saying that the mere fact of having the video card in the computer should mean that the vga output that is coming from the motherboard is disabled - that does not appear to be happening. The are to portson the graphics card, hdmi and dvi. Neither og them output at all. The only port which works is the vga one on the motherboard. That would indicate either a bad PCIe-x16 slot, a failed video card or a bad motherboard. You need to contact HP or the store where you purchased it so you can resolve this issue under warranty. I suggest removing the connection to the integrated video and testing the connections at the video card again.
Robin
The following information on the image is from HP's Products specification on the support portal for your desktop PC. Your desktop PC has a different video card if I read what you said correctly. BTW..no apology required. It happens to everyone.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP Pavillion 500-164 playing through my television

My HP Pavillion 500-164 doesn't have a HDMI jack on the back of the desktop. But it has a VGA jack. I've plugged in a VGA cable to my desktop and to my television. But only get the computer desktop screen on my television. Nothing else. I own a HDMI cable. Should I get a VGA to HDMI converter?
This question was solved.
View Solution.

As you computer has the following connections;
3 - VGA 4 - DVI-D 12 - Audio: Line Out port (lime)
I would suggest using an HDMI-to-DVI cable and a 1/8" mini-stereo cable to connect your computer to the HDTV. Alternatively, you can use a VGA cable but theoretically the image will be of poorer quality.
Please see these examples from Amazon.com (RadioShack.com wouldn't work);
HDMI-to-DVI = http://www.amazon.com/Cable-Matters-Rated-Speed-DVI-D/dp/B004CBDY42/ref=sr_1_2?ie=UTF8&qid=139416240...
1/8" mini-stereo = http://www.amazon.com/Gilmour-3-5mm-8-Inch-6-Feet-Stereo/dp/B000NO7CIG/ref=sr_1_13?s=audio-video-acc...
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP Pavillion 500-310t

I just received a HP Pavillion 500-310t desktop. I am trying to use my HDTV as a monitor. I purchased a DVI/VGA adapter cord to use, but my tv is still not recognizing that it is connected to the desktop. I have it on the RGB/comp input. I understand the audio will not work like this, but I just want the tv to work as the monitor.

Hello @MollyBedsole,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your desktop computer is having trouble displaying an image on your HDTV, and I would be happy to assist you in this matter!
To ensure that your PC and TV are communicating properly, I recommend following this document on Connecting a Monitor, Projector or TV (Windows 7). This should help establish your computer's display on the TV.
For further assistance, I will need to know:
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I have a HP Pavillion 500-017c and I Have Bose speakers and I have no sound ?

I have a HP Pavillion 500-017c and I Have Bose speakers and I have no sound ?

Hello JWP33,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are experiencing an issue where the audio is not working on your HP Pavilion 500-017c Desktop PC using Bose speakers. I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this I can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Additionally, if you could also provide the connection type you are using with the Bose speakers (and if wired where they are being plugged in) that would be helpful as well.
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Does HP 500-199 support Virtualization?

Does HP 500-199 support Virtualization? If so, what settings should be changed in Bios (or any other place)?

Hi, John:
Changing the operating system will have no effect on the hard coded BIOS settings and options which are stored on a chip on the motherboard, vice the hard drive.
Since I don't own your model, I don't know where else you can look in the BIOS to see if an enable VT setting exists.
Some PC's have it in the Power or Advanced BIOS options menus.
If you can't find a setting anywhere, then VT is not supported in your model..
A PC has to have both a VT capable processor and BIOS in order for Virtualization Technology to work.
It does not appear the BIOS in your model supports that feature.
Best Regards,
Paul

Is CE 500 Switch support 802.1q Trunk?

Dear All,
Is Cisco Express 500 switch support 802.1q trunk?
Also, all fastethernet port on CE500 will assign VLAN 10. I would like the switch to allow VLAN 20 and 30 to pass through the trunk? Is it possible?
Thanks.
C.K.

Yesh, set up the port role to switch to make it a trunk.
Unfortunately, the CE500 series switches cannot be managed through a CLI - you have to use CNA.
Hope that helps - pls rate the post if it does.
Paresh

The pavillion 500-319na only has a180 w power supply is this enough

I am thinking of buying a HP Pavillion 500-319na desktop PC, like the spec but my main worry is that its only has a 180 watt power supply, is this enough.

Dear wb2001 & banhien and anyone else willing to contribute,
Please disregard the PSU form factor list at:
HP 500-319na
In actual fact, the Psu is an internal unit. It seems there has been an error when listing the specs.
It is a 180W internal PSU.
The question remains for anyone willing to help us understand.
How is it possible to run this system with these components with just a 180w PSU at moderate to full load/system resource capacity.
Every single Wattage calculator I've used online (mainstream manufacturers and industry accepted benchmarks) show that this setup needs at least a 220w to 300w psu to run at full load. Have there been comprimises made in some shape or form?
I'd really appreciate any input that the community can provide.
Please help fill in the gaps!
i5-4460s
8GB Pc-1600 DDR3 (2x4GB)
NVIDIA GeForce GT 705 (~31W)
Wifi Card - atheros single band 802.11 b/g/n
2TB 7200 rpm HDD
Super multi DVD drive
7in1 multimedia Card reader
Pendragon Memphis-s Motherboard
Beats Audio 7.1
@ Full whack
on 180w PSU? - Don't understand how.
My genuine and sincere thanks,
Algren

Pavillion 500-467C Sound Problem

Two months ago I bought a Pavillion 500-467C from COSTCO. My family and I have had 20 -25 computers in the last 20yrs.This one, by far, has the words sound quality I have ever heard coming out of any computer. I would like to bypass the built-in sound and add a sound card. Is there an open slot for a new sound card and what's involved in disabling the existing sound. if the comuter will accept an add on sound card ... do you have any sound card suggestions? Thanks in advance.Lwgiering

Hi
You have a couple of options as I see it.
Go to device manager and uninstall the driver and restart and unit will install the driver automatically.
Try doing System restore to the date when the unit was working fine.
Try to update the driver from hp.com website for Sound & Bios.
Last step is to run a recovery on the unit before these please back up your data.
If still does not work speaker on the unit have gone bad needs to be replaced.
If your notebook is still under warranty, contact HP and arrange to have the speaker replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Enable both DVI ports on HP Pavillion 500-319na

I have just bought an HP Pavillion 500-319na which was described as having 1 x HDMI, 2 x DVI video interfaces.
The nvidia GeForce GT 705 Graphics card has 1 x HDMI, 1 x DVI sockets
The motherboard also has 1 x DVI socket which was blanked off with a small piece of plastic with "Do Not Remove" on it.
After advice from PC World I removed the plastic and tried the motherboard DVI socket which didnt work.
Is there a way to enable the motherboard DVI socket to work in parallel with Graphics card sockets.
Ultimately I would like to simultaneously run two monitors from the DVI sockets and have the HDMI socket enabled.
This is my first ever Post anywhere so apologies if there is insufficient information,
Cheers
RSPII
This question was solved.
View Solution.

Please provide the complete brand and model information for the two monitors you are attempting to connect to your computer.
Based on the specs of your HP Pavilion 500-319na Desktop Computer, this model has one integrated VGA (analog only) port and one integrated DVI-D (digital only) port as shown below (PLEASE NOTE: Integrated video is not available if a graphics card is installed);
#4 - VGA (analog only) #5 - DVI-D (digital only)
Please replace the plastic cover you previously removed. There is no way to enable the integrated video ports while a discrete video card is installed.
NVIDIA GeForce GT 705
DVI (dual-link) resolution: 2560 x 1600 x 32bpp at 60Hz
HDMI resolution: 1920 x 1080
Analog VGA resolution (via dongle): 2048 x 1536 x 32bpp at 60Hz
Supports up to two displays at the same time.
There are a few ways to connect the monitors to your computer, however you can only use the two ports on the NVIDIA GeForce GT 705. The discrete card supports DVI-D (and VGA via dongle) and HDMI. HDMI signaling is the same as DVI-D in this case.
BEST (Recommended)
Computer --> DVI-D cable --> Monitor #1
Computer --> HDMI to DVI-D cable --> Monitor #2
GOOD
Computer --> HDMI to DVI-D cable --> Monitor #1
Computer --> DVI-D to VGA dongle --> VGA cable --> Monitor #2
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP Pavillion 500 PC series (model no : 500-119ea) - no sound

My PC is running on Windows 8 and I have bought it recently. My PC is a HP Pavillion 500 PC series (model no : 500-119ea). I have no sound whatsoever coming from my computer. The speaker icon at the bottom of my desktop is not on mute. I seem to have an IDT high definition audio CODEC on my hardware and sound settings. In the device manager, this is enabled. However when I test this, no sound is coming. Do I need a HDMI cable connecting my CPU and monitor. Both are HP.
Please let me know how I can get this fixed?

Your HP Pavilion 500-119ea Desktop Computer doesn't have internal speaker and therefore must be connected to external speakers to produce sound. This model supports;
2 - Optical S/PDIF-out 12 - Audio: Line Out port (lime)
Additionally, ports 8, 9, an 10 can be used for multi-channel audio setups. Also provide the model number of your monitor, so we can determine if it has speakers and what connections are needed, if any.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Will my Airbook (11" late 2010) w/ NVIDIA GeFORCE 320M 256MB using the Mini Display Port to Dual-Link DVI Adapter support the Dell 3007WFHC (30") monitor at full resolution (2560X1600)

Will my Airbook (11" late 2010) w/ NVIDIA GeFORCE 320M 256MB using the Mini Display Port to Dual-Link DVI Adapter support the Dell 3007WFHC (30") monitor at full resolution (2560X1600).
Works fine at 1280X800 (with out without MDP DL DVI Adapter) - cannot get any higher resolution

Hi ddickson01,
The MacBook Air 11 inch late-2010 model does support 2560 x 1600 resolution on an external display. See this specifications article for reference -
MacBook Air (11-inch, Late 2010) - Technical Specifications
Thanks for using Apple Support Communities.
Sincerely,
Brett L

HT1923 iTunes on my Windows Vista has failed to update over several weeks. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting

iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??

Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

When will Adobe Reader for Mobile Devices support 3D PDF files?

When will Adobe Reader for Mobile Devices support 3D PDF files?

There are two basic varieties of LiveCycle XFA...Static XFA and Dynamic XFA, which are very different in terms of their future for potential support in Adobe Reader for iOS. Which variety of XFA are you using?
Static XFA uses the PDF markup language for content and form fields, so users can view the documents in Adobe Reader for iOS, but we currently do not properly handle filling, saving, and submitting those forms. I have improving our handling of Static XFA on my roadmap, but cannot offer any specific date yet (sorry, policy plus actual uncertainty). I know that there are some other apps that partially support Static XFA, though I do not know how complete their support is. If you can even open the XFA document in Adobe Reader for iOS, it is likely Static XFA.
Dynamic XFA is effectively a JavaScript application packaged inside a PDF wrapper, which generates layout and form fields via code and requires a significant engine to support this. Support for Dynamic XFA is unfortunately not currently on our roadmap for iOS due to the nature of the technology, and our concern that any implementation we try likely will not pass Apple's restriction against installing something that allows other "apps" to be downloaded and executed from within it. The LiveCycle team is exploring solutions for our enterprise customers wanting to use Dynamic XFA from mobile devices as part of their server offering, but I cannot offer any insight here. To my knowledge, there are no applications that handle Dynamic XFA other than Adobe Reader for the desktop platforms (Windows, Mac, Linux).
Dennis

Will the iPhone 4s still be supported until 2016?

Will the iPhone 4s still be supported by Apple until 2016? What I mean by supported is that if it is still going to be on Apple's website?
1. Until when will the iPhone 4s be supported by Apple? Because I remember before that the 3GS was still on Apple's website when it was already 2012.
2. Is the iPhone 4 still supported? Because I can still see in the App Store that in the requirements they still say iPhone 4 and above
3. Will iOs 8 support the 4s when it gets released in the future?
Thanks!

Since these are user to user forums, nobody here would know the answers to any of your questions, and discussion or speculation on unannnounce products and services are not allowe here per the terms of use you agreed to when signing up to use these forums.

Will a HP Pavillion 500-569 support a gtx 750ti or gtx 970 mini

Similar Messages

Maybe you are looking for