Will a imac g5 run mac os x snow leopard

i think it might not because i havent seen nobody on youtube run it

Well, some system requirements are artificial and you can get around them easily or with some effort. The requirement for Intel hardware with Snow Leopard is very real. No amount of hacking is going to get Snow Leopard to work on PowerPC hardware.

Similar Messages

HT1444 How can I upgrade the OS on my 5 year old MacBook Pro 17. It is currently running 10.4 (Tiger). I have an IMac 27 running Lion but have Snow leopard discs which came with the purchase. Can these be used to upgrade?

How can I upgrade the OS on my 5 year old MacBook Pro 17. It is currently running 10.4 (Tiger). I have an IMac 27 running Lion but have Snow leopard discs which came with the purchase. Can these be used to upgrade?

Buswab wrote:
How can I upgrade the OS on my 5 year old MacBook Pro 17. It is currently running 10.4 (Tiger). I have an IMac 27 running Lion but have Snow leopard discs which came with the purchase. Can these be used to upgrade?
If they are the grey discs which came with the iMac, then they will be machine specific and will not work on the MBP anyway. You will need to purchase a retail copy of Snow Leopard from the Apple Store for about $29 and upgrade from that. I presume your MBP is Intel and not G4.
Good Luck
Pete

Graphics card crash - MacBook Pro running Mac OS X Snow Leopard

Hi,
Yesterday I was playing Age of Empires III for Mac, and at the start of a Skirmish mission, where there wasn't much going on yet, the game seized, and then after a while the screen started flickering to black in these big horizontal chunks... I was unable to quit, restart, force quit, nothing.
Pretty much the whole bottom of the screen went black, while a middle part was flashing on and off.
I'm afraid there might be something wrong with my graphics card.
Here's the crash report after I force-shutdown my MBP, and started it again:
Also, the MacBook Pro is only a few months old and there seems to be other problems:
1. There's dust under the glass of my screen!
2. When I try to put a CD in, it gets caught on some stuff, and I have to jimmy it around to get it inside
3. The bottom of the laptop creeks really loud when it's on my lap (which isn't often, but still, worrying and not very Apple-ish noise every time I handle it), the case moves, etc.
What should I do? I've had laptops repaired in the Apple Store a few times before, and they always ended up coming up worse than they went in. New problems, etc.

Hi
The dust & cd & creaking won't get better, regrettably - so back it would go, for me anyway - unless you really feel it'll be made worse.
Later mbp's have an auto graphic switching setting in System Prefs-Energy Saver - try switching that off -
assuming the crashes are repeatable.

22" iMac desktop OSX 10.6.6 Snow Leopard and it won't boot. I've tried shift start, option command+P+R. It's stuck at the restart, all I see is the spinning wheel below the apple logo.

I have a 22" iMac desktop running OSX 10.6 Snow Leopard and it won't boot. I've tried shift start, option command P R. It's stuck at the restart, all I see is the spinning wheel below the apple logo. And I lost my OSX DVD is there any way to fix this? I just did a software update yesterday and have about 20GB left on my Hard drive. The last thing I did was try to install some plugin's for Pro Tools 8, but it wouldnt let me install so I restarted and now I'm screwed. Please Help!
other specs for my computer: 3.06GHz Intel core 2 duo processor 500 GB Serial ATA hard drive, iSight, magic mouse, wireless mac keyboard
iPod classic 160GB (Late 2009), Mac OS X (10.6.6)

You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them.

Installing Windows XP Pro alongside Windows 7 & Mac OS/X Snow Leopard

I am running mac os/x snow leopard. I have partitioned my hard disk three ways:
Mac OS (journaled), Windows 7 and a third partition on which I intend to install Windows XP Pro. The 3rd partition is formatted NTFS.
My understanding is that if I were to insert a Windows XP Pro CD and hold down the C key the Mac would prompt me on which partition I wanted to install my Windows XP Pro.
However, that does not appear to happen.
I hold down the C key as soon as the Mac starts booting up and the CD sounds like its spinning up, but instead of being prompted to select a partition on which to install the Windows XP Pro the system defaults to the Windows 7 partition and it boots up into Windows 7.
Anyone got any ideas as to what is going?
Thanks in advance.
Eddie

Hi Eddie,
have a look here at how-to TripleBoot a Mac http://guides.macrumors.com/Triple_Boot
(substitute Vista with Windows 7).
Something may have awry when you did the partitioning.
regards
Stefan

I have an apple iMac G5 running Mac OS 10.4.11 can i upgrade it to 10.5? if so will i also loose all the software currently installed on my Mac? eg. Adobe software.

I have an apple iMac G5 running Mac OS 10.4.11 can i upgrade it to 10.5?
If so will i also loose all the software currently installed on my Mac? eg. Adobe software.
I have moved countries (opposite side of world) so i do not have my install disks, or the disks that came with my Mac.
Where can i get the 10.5 upgrade from?
Do i need my original disks that came with my Mac?
- Thanks if anyone can help
Note:
I have never had any problems with my G5, it's been my awesome helper these past 7 years, I can't say the same thing for my new Mac, but it seems now my poor G5 is slowly being made redundent because they no longer write software for it.
I don't see why i should pay for a new Mac because my old one does not always function on the web, or having a new printer because it does not support the new software.
My New Mac Laptop has had no end of troubles since i bought it less than a year ago.
What happened to Mac being a sign of Quality??

First off, all upgrades can potentially break a system. First and foremost, backup your data before installing anything. Next read this tip as 10.5 loses Classic compatibility, and has these other issues outlined on the tip: https://discussions.apple.com/docs/DOC-2275

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all. Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.
Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac, so I hope somebody can give me some advice.
Cheers

if it's ntfs microsofts filesystem then you need a windows machine to recover them

Will Mac OS X Snow Leopard INSTALL on a IMAc g3 slot lOADER?

will Mac OS X Snow Leopard INSTALL on a IMAc g3 slot lOADER?
Message was edited by: Youngzink13

That's what we needed.
Officially your iMac--known as a "tray-loader" for its optical drive type--can go to Panther (10.3.X). Panther is quite better than Jaguar (10.2.8) that you now have. You probably need more RAM than 160MB for even Jaguar. I feel that 384MB is about min for that OS.
The big problem is that the early iMacs came with painfully small hard drives --4 to 6 G--and OSX need a lot of free space on the disk for efficient performance. It's hard to keep a Jaguar system under 2G with a few useful apps installed.
Bottom line: you'll spent money for a hard-to-find retail OS install disk, more RAM, and a bigger hard drive, and you'll still have a slow computer that will always struggle with modern web pages. If you want to upgrade and experiment as a hobby or learnign experience and you can afford the parts and time, by all means--go for it. However, if cost is an issue, throwing money at this unit is not cost-effective in terms of how much more yo ucan get from it.

Why cant i install Mac os x snow leopard on my Imac early 2011

I have mac OS x mountain lion and I'm trying to downgrade to snow leopard by making a partition and trying to boot the install dvd that I just got but when I try to boot the install dvd by holding down (c) or doing it in the system preferences > start up disk the apple logo just appears can someone help

There is no Early 2011 iMac. There are Mids and Late. That's it. Mids came with 10.6.6 or 10.6.7. The Late requires 10.7. It's a convoluted process for the Mids, but you can install Snow Leopard on them.
How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
1. Create a new partition on the hard drive.
2. Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard
        system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1. Restart the computer and after the chime press and hold down the
               COMMAND and R keys until the menu screen appears. Alternatively, restart
               the computer and after the chime press and hold down the OPTION key until
               the boot manager screen appears. Select the Recovery HD and click on the
               downward pointing arrow button.
          After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.           In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.           Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the USB
flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external drive. Source means the Snow Leopard Mac's
internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the external drive.
You will need a retail copy of Snow Leopard. If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.

ORIGINAL Mac OS X Snow Leopard into 2 imacs?

Can I install the same original dvd mac os x snow leopard in 2 imacs? Both of them has a mac os x 10.5.8.

There are two answers to that question:
1. Can both Macs run Snow Leopard?
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
2. Unless you have the family set, your install DVD is only licensed for ONE Mac.

All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!

All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
Error report as follows
Process:         Pages [208]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.1 (923)
Build Info:      Pages-9230000~1
Code Type:       X86 (Native)
Parent Process: launchd [93]
Date/Time:       2012-08-22 12:33:15.909 +0100
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          102101 sec
Crashes Since Last Report:           11
Per-App Interval Since Last Report: 2217715 sec
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      1FA704D3-D5EF-4CE3-9813-42E4559157DC
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: _SFAAutosaveUserActivityException
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchiving

I'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
Process:         Pages [13521]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.3 (1048)
Build Info:      Pages-10480000~1
Code Type:       X86 (Native)
Parent Process: launchd [153]
User ID:         501
Date/Time:       2013-03-11 14:57:02.175 -0400
OS Version:      Mac OS X 10.8.2 (12C3103)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Reason: image not found
Binary Images:
    0x1000 -   0x354fe3 com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
0x3ec000 -   0x46bff7 com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x8fe3e000 - 0x8fe70e57 dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld

I have OS X 10.5.8 on my iMac, I'm trying to install Snow Leopard. When I insert the disk and click install it will start to install, then once it gets about 1/4 of the way done my computer restarts and it spits the disk back out.

I have OS X 10.5.8 on my iMac, I'm trying to install Snow Leopard. When I insert the disk and click install it starts, but when its about 1/4 of the way done the computer restarts and my disk spits back out. When I look to see if it installed it still says 10.5.8. Is there something I'm doing wrong?

Model Name: iMac
Model Identifier: iMac6.1
Processor Name: Intel Core 2 Duo
I bought the Mac OS X Snow Leopard Install DVD from the Apple Store.

Can I run Adobe CS, CS3, CS4, and CS5 software on Apple Mac upgrade forom Snow Leopard to Maveric OS X ?

I would like to know if I can run my older Abobe CS, CS3, 4, 5 on an upgrade from Mac OS X Snow Leopard to OS X Mavericks ?

Might work; might not. Legacy apps (CS2, 3, 4) that weren't built to run on modern operating systems may have trouble with Mavericks. I think you'll be OK with CS5, 6 and CC.
Nancy O.

PLEASE HELP ME - I am not very tech savy and I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me ;-(

I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me

krystiefrommorayfield wrote:
I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I
installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me
You connect your iPhone to iTunes through the Sync Process...
See Here
Syncing with iTunes
From Here
http://www.apple.com/support/iphone/syncing/
http://www.apple.com/support/iphone/

Will a imac g5 run mac os x snow leopard

Similar Messages

Maybe you are looking for