Will a mini dp work in my thunderbolt output slot on my MBPro?

Will a mini dp work in my thunderbolt output slot on my MBPro?

The Thunderbolt port is also the mini-DisplayPort, so yes.

Similar Messages

  • [GeForce 6] will this 8x card work on my 4x agp slot

    I j upgraded from a fx 5900xt and  I just purchased a msi nx6600gt-vid128 card( agp) .  I have a p4 2.2 , 1gig rd ram and a 400 front side bus (p4 lexington motherboard). I have 2 questions
    1) will this 8x card work okay on my 4x agp slot.  The packaging says that the card requires a 8x  compliant  mainboard, but tech support say they are backward compitable to 4x agp slot.  tOon newegg.com  where i bought it is says it is a 4x/8x card. I am confused .  my fx5900xt was a 8x card and worked on my 4x slot.
    2)Is driver 71.89 okay to use with this card.  I heard 77.72 has problems. what about 77.50 or 77.77 drivers

    any agp x 4 board should be fine
    just it will run a percent or so slower than in a x8 board
    all you need to do with 77.72 is go in drivers
    colour correction
    3 boxes alter to
    all
    all channels
    advanced mode
    and hit apply

  • Will old mini dock work for Z60m work with new T55

    I currently have a IBM Z60m which I purchased with a Advance Mini Dock a few years back. I'm considering purchasing a T500 does anyone know if the old mini dock I have will work with a new T500, The picture looks like the same Mini Dock?

    yes it does. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Will the A1347 MacMini work with a Thunderbolt display 27 inch?

    I have a Thunderbolt diplay 27 inch. I would like to know if a Mac Mini 2010( MC270LL/A) Model A1347 display port be use to turn on diplay?

    No the 2010 does not, only the 2011 and 2012 Mac Mini models support Thunderbolt.

  • Can Adobe Premiere run on 2013 Mac Book Pro (thunderbolt port) and display on 2010 iMac (Mini DisplayPort) using TDM. TB cable   Opt. F2 didn't work. Will a Mini Display cable work?

    I need to work on Adobe Premiere on my 2013 Mac Book Pro (with thunderbolt port) and display it on my 2010 iMac (with Mini DisplayPort) using Target Display Mode (TDM). I tried using a thunderbolt cable plus Option F2, but it didn't work. Will a Mini Display cable work? Any other suggestions?
    iMac specs - 21.5 inch 2010 iMac 3.06 GHz Intel Core i3 4 GB 1333 MHz DDR3
    Mac Book Pro specs - 13 in. retina 2.6 GHz Intel Core i5 16GB 1600 Mhz DDR3

    2010 iMacs do not have Thunderbolt, they have mini-display ports. You are using the wrong connection, you need a mini display port to mini display port. Please read up on what Apple says in Target Display Mode: Frequently Asked Questions (FAQ)

  • Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

    I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

    I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

  • Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

    Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
    This is a brand new MacBook Pro (15-inch, mid-2012) just received.  I suspect that this is a hardware problem as:
    The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
    The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
    The new MacBook Pro powers an Apple Thunderbolt display without issue.
    Both MacBook Pro's are running OSX Lion 10.7.4.
    The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
    All adapters and components (mini-displayport adapters) are Apple retail adapter.
    I have tried several external monitors, including my Dell U2412m.
    When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode.  Using the "Detect displays" button has no effect, even when used multiple times.  Rebooting does not help, nor does resetting the SMC or PRAM.
    Any other suggestions before I take it to the Genius Bar?

    I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
    I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure.  Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous).  However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
    Hope that htis helps.

  • Will the mini display port to vga adapter work with a 2007 mac book?

    will the mini display port to vga adapter work with a 2007 mac book?

    I think your Macbook came with a Mini DVI port instead of a Mini Display port.

  • Will OS 10.6 work on my mac mini core solo?

    Will OS 10.6 work on my mac mini core solo?

    Yes, if it has at least 1GB of RAM.
    (81677)

  • Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter?

    Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter? I like to have two monitors and currently using an Cinema Display from 2005. Thanks

    If your computer does not have Thunderbolt you cannot use a Thunderbolt display.  There are no adapters that will help.

  • Have a canon dc310 camcorder that uses mini dvd's. How can I get my new Imac to read these dvd's?Camcorder unable to connect to computer. Will a mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with a mac?

    I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer.  How can I get my new Imac to read these dvd's?  Will the mini dvd adapter work or do I need to purchase an external dvd rom device?  Which device works well with the Mac?  Do I need anything else to get the dvd material onto my mac?  Thanks!!

    No DV port in camcorder.  Just a yellow AV port/hole.  I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's.  Can I use this with a Mac?  Could I connect a dvd player to the Canopus and transfer the disks onto my Mac?  Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way?  Thanks again!

  • Have Thundbolt on my mac will not work with my thunderbolt drive

    I have a port on my Imac, but it will not work with my ThunderBolt Drive

    Agree on cables, you don't want something generic when it comes to thunderbolt in my experience. It's thos accessories that add up and they are profitable for a reason. Cheap isn't always good with accessories.

  • Hi my iPad mini was working fine but now is just a blank screen will not respond to any buttons or connect to I tunes

    My iPad mini was working fine then screen black and will not. Respond to any buttons or connect to iTunes

    Plug it into the wall charger an wait for at least 30 minutes.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Will this hard drive work in my iMac G5?

    Will this hard drive work in my G5? 
    http://www.amazon.com/dp/B005CT56XU/?tag=extension-kb-20
    Below are the stats for my iMac.
    Thanks for any help!
    Processor
    Memory
    Processor speed:
    - 2.0 GHz.
    Processor Type:
    - PowerPC, G5
    Number of Cores:
    - 1
    Bus Speed:
    - 667 Mhz
    Cache:
    64-bit Support:
    - No
    Turbo Boost:
    - No
    Installed RAM:
    - CTO
    Max. Amount:
    - 2.0 GB
    Amount of Slots:
    - 2
    RAM Speed:
    - 400 MHz
    RAM Type:
    - PC-3200, DDR, SDRAM
    Storage and Media
    Graphics
    Hard Drive:
    - CTO, 7200rpm.
    Hard Drive Brand:
    - Unknown.
    Drive Bus:
    - Serial-ATA
    Optical Drive:
    - CTO.
    Optical Bus:
    - Ultra ATA/133
    Other Media:
    Display Size:
    - 17-inch.
    Graphics Card:
    - ATI Radeon 9600
    Card Memory:
    - 128 MB
    Max. Resolution:
    - 1440 x 900
    BLU / Coating:
    - TFT LCD
    Networking
    Ports and Expansion
    AirPort:
    - Built-in AirPort Extreme (802.11 b/g)
    Ethernet:
    - 10/100/1000BASE-T (RJ-45)
    Bluetooth:
    - Built-in Bluetooth 2.0 + EDR
    Infrared:
    - None.
    Modem:
    - 56k v92
    USB:
    - 3 ports (USB 2.0)
    FireWire:
    - 2 ports (FW400).
    Display port:
    - Mini-VGA
    Card Slot:
    Thunderbolt:
    - No Thunderbolt port.
    Operating System and Software
    Temperature and Cooling
    Original OS:
    - Mac OS 10.4 Tiger
    Maximum OS:
    - Mac OS 10.5.8
    Recommended OS:
    - Mac OS 10.4.11
    iLife Supported:
    - Coming Soon

    Well, there are different versions of Sata.  See:
    http://en.wikipedia.org/wiki/Serial_ATA#Revisions
    I think this is the info someone would need:
    You may want to post machine info.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the word hardware.
    Leave out the serial number.
    Example:
    Machine Name: iMac
    Machine Model: PowerMac4,1
    CPU Type: PowerPC 750 (33.11)
    Number Of CPUs: 1
    CPU Speed: 600 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 768 MB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.1.9f1
    Look around & see if you can find the bus speed for the SATA.
    Robert

  • Will the Cinema Display work with an older MacBook Air?

    My wife has an older MacBook Air (circa late 2009) with one USB 2.0 port and one Mini Display port. Will the Cinema display work with this model Air?

    It looks to me like the cinema display is a DVI connection.  If  you have a MiniDisplay port to DVI adapter that connected the MBpro to the display then you have everything you need.  (plus a DVI cable).   The MDP adapter plugs into the Thunderbolt port of the MBair.

Maybe you are looking for

  • How to get songs back on iTunes once uploaded to iCloud & deleted off hard drive?

    I have my 10,000 song library saved on an external hard drive.  I got the subscription to help limit used space on my laptop hard drive.  I started iTunes Match with my entire library (external drive) and uploaded my entire 10,000 songs.  Once comple

  • Need to find the assets associated to a BCC project using SQL query

    Hi, Given a BCC project (project_id), I need to find the assets (type of asset, version, status etc) in that project using SQL queries. I need this for reporting purpose and cannot do this programatically using any code. Surprisingly ATG does not sto

  • Balance confirmation from GL code

    Hi experts, I can get Balance confirmation certificate for Customer/ Vendor is F.17 and F.18.In our compnay,we used to give loan to our sister concern and it is reflecting in GL code.All transaction happen in this GL code.At the end of year,the balan

  • $0.00 invoices coming up as owing?

    Hi there, We use the Unpaid invoices section to chase owing accounts but every $0.00 invoice (for replacements / samples) is showing which is getting annoying as we have been using BC for over a year. We can't delete the invoice as we need the stock

  • My itouch will not finish downloading this iBook

    A couple days ago I was able to download iBooks, but when I started this one it wont get off the downloading screen and the bar wont even budge. I can't figure out why after google searching and trying different answers, and no, rebooting doesnt work