Will a minimum mbp 15'' be sufficient to run autodesk inventor smoothly in boot camp?

which setup / combination for the 15'' will be best for the job (autodesk inventor in boot camp)?
I have a limited budget of $2000 (with educational pricing).
will a basic map 15'' be good enough or what upgrades do i need?
or should i just get the 2.2 Ghz w/ better graphics card?
Thanks.

Get the 2.2 Ghz with better graphics card. The Radeon 6750M is awesome!
Everything is so smooth and responsive, even with a 3D animated screensaver as a desktop.
Heck, you might be able to render in Windows in a virual machine software like VMFusion
VMFusion will even copy your Bootcamped Windows for a virtual machine in OS X.
I can play some 3D games in Windows in VM if they are lightweight.

Similar Messages

Looking to run autodesk inventor on a new mac pro* will it work?

Looking to run autodesk inventor on a new mac pro* using boot camp and windows.
Will it work or am I waiting my time?

As an alternative, though not an ideal FCS box, the Intel iMacs should be fine, and should fit into the same budget range as the MacBooks.
For serious FCP work, I wouldn't recommend an iMac, but for the purposes you've outlined, it should be acceptable, for the most part.
EDIT: My comment above is in reply to your comment about school purchases, not your original post about carrying around two laptops.

Late 2013 MBP/Fusion/Boot Camp partition w/Windows XP (!), can I get Bluetooth working or should I give up?

Hello and please bear with the length of this post. I had an old MacBook Pro (2007 Santa Rosa) that ran Windows XP in a Boot Camp partition just fine. One thing Windows has that the Mac doesn't is a free OBD2 app that lets me communicate with a Bluetooth OBD2 scanner to reset my check engine light and read the codes. This scanner uses Bluetooth.
A few months ago by a stroke of good luck I got a new Retina MacBook Pro. Windows XP will not install on it, only Win 7 & 8 (I don't have the install disks anymore anyway). I did not want to buy a new Windows just to run this one program (the only Windows app I really need). I thought I could possibly run my old Win XP Boot Camp partition (now in an external USB3 case) under Fusion, and it turns out that I can indeed do this. However I can not get Bluetooth to work – Win XP, under Fusion, does not see any Bluetooth hardware. I got some help on the Fusion forum – I was told to uncheck the Share Bluetooth devices with the virtual machine box and check the Apple Bluetooth USB Host Controller box to connect Bluetooth to the virtual machine. WIn XP, under Fusion, does not seem to see any Bluetooth hardware.
My question is, do the Boot Camp drivers originally installed when I first used Win XP on my old Santa Rosa MBP have any role here? I was thinking I might have to update those drivers since I'm on a new Retina MBP, but the update notes specifically say the newer drivers are for Windows 7 and 8. I haven't tried to install them yet – maybe they'll even refuse to install, I don't know.
If I'm truly wasting my time trying to get this to work I'll fork over the $40 for the Mac OBD2 software, although I really only need it for a "single use" (trying to pass a state inspection, lol!). TIA for any help!

Please ignore the last message - I was hoping I could delete the thread but it looks like I can't.
After a little more investigation I've decided to give up this quest and pay the $40 for the Mac software.

Boot camp will not install windows 7?

I have a 2009 MacBook Pro with Intel Core 2 Duo; OS X 10.9.1, 750 Gb HD, Optical Drive: MatshitaDVD-R
Boot Camp support version 5.1.5640
I can not get Boot Camp to install Windows 7. It will create a partition, but gives me a
“1...2...Select CD-ROM Boot Type“ error and freezes up when attempting to install from Windows install disk in optical drive..
I created a windows7 iso file and installed that on a usb stick, but Boot Camp will not recognize that either.
Is there any way to actually use Boot Camp and Windows on this computer?

Is your Windows 7 cd a full retail version?
You are using the wrong Windows Support software. Look for your computer here: Look for your computer here: http://support.apple.com/kb/HT5634
If your computer came with an optical drive you can not use a usb stick to install Windows.

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and somehow it crashes the mac side peridoically. I am told I need to "clean" it and reinstall lion using the recovery drive. will that delete the windows partition too??

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto. I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system. My question is will this also delete the "windows" partition drive and all that data too. If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

Boot Camp Update 2.1 will not run

I'm trying to install Windows XP on my Intel Macbook. It's a legal copy purchased from Microsoft so no trouble there.
The Bootcamp Assistant worked fine and the Windows install worked fine. I'm now at the point of trying to install the Boot Camp drivers but I don't have my Leopard disc available. (I bought a an OS X Family Pack and my son currently has the discs 20 miles away.)
Accordingly, I downloaded the Boot Camp 2.1 update from Apple but it simply will not run under Windows in the Boot Camp partition. It briefly looks (1-2 seconds) as though it's starting, but then never does.
I tested the .exe file on a pure Windows machine and it runs fine so there's no file corruption problems.
I've searched online but can't seem to find any solution to this particular problem.

djrichards wrote:
Thanks for the response, Stefan.
But that's not what the Apple download page says. Specifically it says the following.
"Note: This download contains complete copies of Boot Camp Windows XP Drivers (version 2.1). If you have Boot Camp drivers already installed, it will update them. If you do not have any Boot Camp drivers installed, it will install version 2.1 drivers onto your already installed Windows OS."
Hi,
I admit I haven't ever taken a closer look at that and as said to my knowledge, the 2.1 update only works with the 2.0 drivers already installed.
Just did a quick googling and couldn't find any success story of using the 2.1 Update as a standalone driver install without having the 2.0 driver installed before.
Do you have the needed Admin rights when running the update.exe ?
Stefan

Will I be able to play games OK under boot camp with the 2.66GHz 24" iMac?

I am considering moving to mac but I have a couple of PC games that I would like to continue using. These games are red alert 3, tomb raider anniversary and i would like to get sims 3.
How well will games play on the new 2.66GHz 24" iMac? or would I need a better computer?
Also will the mac version of sims 3 work well on it, or will this work better if i got the windows version and played it using boot camp.
Finally would it be advised I used XP instead of vista or would it still be possible to play these games using vista with boot camp.
Thanks a lot in advance!
Ben

If you grabbed one of the current iMacs you'd have very little trouble playing almost any of the games currently on the market and a good many of the ones scheduled to arrive this year.
Boot Camp is really simple and easy to use so if you don't feel like buying the Mac versions of your games you can quite easily run them on Windows via Boot Camp. However, the Mac versions tend to be just as good as the PC versions (I would say at times they're even more stable).
As for XP or Vista, that's really your choice. The last specs I saw put XP as a better gaming OS than Vista, and for the longest time I forsook Vista for a performance build of XP Pro, but now I've actually started using Windows 7 to do some gaming and have found it to be a good competitor for XP.
That being said, if you're getting one of the newer Macs you're better off with Vista if only for the DDR3 RAM support which, I'm told, isn't found in XP. The RAM works just fine in XP but, again from what I've been told, Vista can use it to it's fullest.

My iPhone5 is my wifi hot spot for my mac mini computer and iPad. I live in a rural area. Will this be sufficient to run apple tv and air play?

My iPhone5 is my wifi hot spot for my mac minim computer and iPad. I live in a rural area with no other options. Will this be sufficient to run Apple TV and air play?

If you are intending using your hot spot to download movies for the Apple TV, you'll very quickly eat through your data allowance.

Will the new MBP's run Leopard (10.5)?

I was trying to boot my i5 MacBook Pro with an external HD that has Leopard. I was able to select that HD for start-up. However, after the chime, it gets stuck at the apple logo and the computer gets very hot.
I'm thinking that the new MBP's don't like Leopard.

Will the new MBP's run Leopard (10.5)?
No.
(51395)

Will my 4GB MBP work with Mavericks and Windows 7 smoothly?

I own a 13", Mid-2010 MacBook Pro with 4GB of RAM and a 2.4 GHz Intel Core 2 Duo processor. Will this system, given enough hard drive space, be able to run both Windows 7 and the newest OS X Mavericks via Boot Camp without any significant "lag", or effect on performance? I realise it will hurt the performance, but will it effect my ability to use the Mac?
Also, any advice on using Windows 7 with MOUNTAIN LION instead would be great!
If my specs do not meet the necessary requirements, any advice on upgrades i should need is also much appreciated
Thanks!

That Mac will work without any problem in Mavericks and Windows 7, as it meets the requirements of both of them. OS X Mavericks improves Mac OS X performance in most Macs, but make a backup of your files before upgrading Mac OS X. The same if you use Mountain Lion, but it's a bit older OS X version.
If you haven't installed Windows 7 yet, follow these steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

How do I install Lion on an MBP with Snow Leopard 10.6.8, Boot Camp'd XP and a Master Boot Record?

I think this is called "a pickle."
The machine is a 13" MacBook Pro, 2.66 GHz Core 2 Duo w/ 4 GB RAM and a 500 GB HDD.
The HDD has a Snow Leopard 10.6.8 partition, and a Windows XP partition, via Boot Camp. Its Partition Map Scheme, sadly, is a Master Boot Record. I need to reformat it to a GUID Partition Table scheme to install Lion, but when I attempt to boot it from the Snow Leopard 10.6.0 DVD to wipe the drive, it grey-screens. Dead end.
From what I can gather on the forums, I can't boot a 10.6.8 machine using a Snow Leopard 10.6.0 DVD. I can't find my grey DVDs for this machine – still looking for those – but I expect those won't work either, being Leopard-generation?
The machine works fine, for the most part, including the optical drive. Has occassional display and wake glitches. Its HDD is backed up on a Drobo via Time Machine. I also have a 15" MBP Core i7 (with the exact same problem: 10.6.8, XP, MBR) which I can use for Target Disk Mode via FireWire. If I try to wipe the HDD on the 13", using Disk Utility on the 15" via Target Disk Mode, will the 13" then boot successfully from the Snow Leopard 10.6.0 DVD?
I just want to wipe the 13" machine, reinstall a fresh copy of Snow Leopard, then update it to Lion and restore from Time Machine, and never touch anything Windows-related ever again. (And then do the same for my 15", for which I've found my 10.6.3 grey disc. Not sure if that's any more promising.)
Any help appreciated!

Sounds like something is wrong with your disk. Have you tried cleaning it?
The Snow Leopard 10.6.0 DVD is fine – it mounts on both my 13" and 15", and I successfully created an image of it on my 15". I also tried my wife's Snow Leopard 10.6.0 DVD, also clean, which produced the same grey screen result.
Have you tried to use boot camp to erase the Windows partition?
Yep, this is supposed to be the proper way to remove a Windows XP partition from Boot Camp, so this was the first thing I tried. I get the same error as everyone with a Master Boot Record scheme appears to get:
The startup disk cannot be partitioned or restored to a single partition.
Back up the disk and use Disk Utility to format it as a single Mac OS X Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
So, if I can't launch the Disk Utility from the Snow Leopard DVD, my next best guess is wiping it from my 15" over Target Disk Mode. However, if I try that, and still can't get it to boot from the Snow Leopard 10.6.0 DVD, then I'm stuck with an MBP without an OS.
My conclusion – that 10.6.0 DVDs can't boot to 10.6.8 machines – was based on forum posts about downgrading from Lion. I was wondering if there's a way to create a "10.6.8 restore DVD," and try booting from that. Shot in the dark perhaps.

New Retina MBP + Windows 7 boot camp = no nVidia GPU

I'm hoping someone will correct me wrong on this...
I have a brand new 15" Retina MBP 2.6GHz 16GB RAM 500 SSD.
After finally getting Windows 7 SP1 installed (along with countless updates ) and boot camp 4.0, I have noticed some display problems. My only reslution options are: 1600x1200 (which looks stretched), 1280x1024 (reallly stretched), and lesser resolutions with which I didn't bother. This didn't seem to make sense given the nVidia 650M.
Also, NONE of the external video ports are working (Thunderbolt to DisplayPort, HDMI to HDMI, HDMI to DVI) -- they're simply not getting a signal at all.
So I went into device manager, and the 650M is not even showing up as being installed! All I see is "Standard VGA Graphics Adapter", which tells me Windows is only acknowledging the integrated Intel graphics.
I can't simply install an nVidia driver, as it can't see the device onto which that driver would be applicable.
I assumed this was an issue of the "automatic graphics switching." Apple confirmed this, telling me that Windows doesn't have an option to choose between displays. I couldn't find a way to trigger it with any third party app, either (including Adobe After Effects).
Further, Apple claims 64-bit drivers aren't yet available for this GPU, so even if I could switch it over, I'd have to step down to a 32-bit install.
So, basically, my boot camp side looks like a netbook.
I cannot be the only one experiencing this!
Thanks in advance,
Andrew

Paul22 wrote:
You can't install the windows support software before you partition. 1. Start boot camp in OS X and create the windows support CD; 2. Install windows using boot camp; 3. Install windows support software from the CD that you made.
I followed the boot camp manual exactly and the Nvidia drivers were not installed. I had to go into the Nvidia drivers directory in the windows support CD and manually run the setup.exe file. After that, the drivers were installed.
Note: when you create your windows partition in boot camp, you will select custom, and then format. It is critical that you format your boot camp partition and not your OS X partition. It will not say boot camp, but you can tell it's the right one by its size. For example, if you selected a 40 GB size for boot camp, the size of the drive you select to format should be 40 GB.
Paul
That is exactly what I said, are you sure you wanted to reply to me?
FYI, In a normal Bootcamp installation the partition will be named Bootcamp

Hard Drive Full - After Reboot, Will Not Boot to Mac OS - Boot Camp OK Tho?

Hello all,
I having a severe issue with my 2007 Macbook Pro 2.33 w/10.6.xx (I believe I'm up to 10.6.2). Yesterday I was on the net in Firefox and got a message from the OS that my hard drive was full and that I had to kill some running apps to recover needed virtual memory. I killed everything but Firefox, finished my web-based game and shut down. The next time I attempted to start the computer, it would not go past the "gray screen with Apple logo and spinning wheel". In fact, if I hold the option key at startup, I can see my Windows Boot Camp partition, any bootable CD/DVD I might have in the drive and "EFI Boot" only. I cannot see Macintosh HD as option.
Here is a list of things I have done/tried:
1. The day before yesterday, Mac OS (10.6.xxx) informed me on my 2007 15" 2.33 MBP that it was out of HDD space and I needed to kill some apps to recover virtual memory.
2. I force killed everything but FF since I was in a game of Settlers on Asobrain at the time!
3. The computer ran fine for the rest of the session.
4. When I rebooted, all I could get was gray screen and spinning wheel.
5. I forced shut down, tried again, same thing.
6. I tried resetting PRAM with Ctrl-Cmd-P-R at startup, same thing.
7. I tried booting to safe mode. I got past login but it never loaded anything but the default background wallpaper. I shutdown.
8. I booted from the Snow Leopard DVD and ran disk verify, then disk repair but it could not be completed as the drive has been "corrupted".
9. At this point all I get upon startup now is Gray screen w/ Apple, then spinning wheel with progress bar that never goes anywhere then it shuts itself down.
10. When I start the computer in Target Disk Mode (TDM), only my Boot Camp partition will mount, not my Mac HD
11. *I do have boot camp installed, with XP Pro, and it will boot without a problem. In fact, I have HFSExplorer (a free utility f . or reading HFS volumes while in Windows) installed on the Windows side and I can see/browse folders on the Mac partition, so on the fact alone that I can boot to windows I know I don't have a HDD failure.
12. I have also tried booting to Single User mode which worked, I got the prompt. I tried using the "fsck -fy" command and it could not repair the volume.
13. I have tried creating an image of the Macintosh HD while in Disk Utility booted from the Mac Install DVD, but I get an "i/o error".
Please help! Any good suggestions, help, etc. is much appreciated! -Kyler

Hello and welcome to the discussions. All OS X drives need to keep 10-15% free space. If you were operating with less that that capacity, it is quite possible that some files were overwritten. Thus corrupted. The only thing that I could suggest is to try to copy your drive to an external HD or another Mac (Space permitting) Then reinstall using the install disc. You will then have to physically copy files from the external to your new install.
How large was your HD and how much free space does it have? You can use the install disc and Disk Utility to find out.
Cheers,
Glynn

Tried Everything - Boot Camp will NOT work!

Hello everyone, for about the past 7 days, I have tried installing boot camp on my macbook pro late 2011. My MBP Has an hdd in the optical drive bay, and a hybrid drive in the hdd bay. Recently, after the failure to install boot camp the first few times, I bought an enclosure for my optical drive. I have a copy of windows online in iso format, so everything should be working, but, it has not. I have tried using a bootable usb flash drive, with SEVERAL different ones, to no avail. I have made boot camp look as if I had a MBA, to no avail. I have burned a bootable iso to a blank cd, to no avail. NOTHING HAS WORKED. I have waited around 32 hours of work in 7 days to post onto this website, thinking I can do it myself, but I simply cannot. When I did the bootable usb drive method, I got a please insert the bootable disk, and then press any key. And then when I did the bootable blank dvd with a bootable iso on it, all my mbp would do is blink that cursor thingy on the black screen. EVERY single usb drive was taken out for the computer. The only things plugged in were my charger, and the external optical drive bay. Please help me with any useful info, as it would help me so much.
P.s. I have also used Wine/Crossover. I am ONLY doing this so I can game windows games on Steam. It is the sole and only reason for this venture. Crossover did not have enough support for the games I wanted to play, and would crash often, and Wine will not work with some of the newer games, with very little support/incentive from developers. Please if I have done something wrong by trying to use these, or maybe I'm just not using them right, please tell me.
If anyone has any other solutions to windows games played on a mac through steam, please tell me, It would mean a lot.
This has been a very frustarating adventure, and I really would love to get this resolved. Whoever gives the advice that ends up working, will get best answer. Thanks!

If you had done any google searches for installing Windows on your model Mac computer you might of found out that Windows will ONLY INSTALL from the BUILT IN DVD drive when it is installed INSIDE the system. So since you have replaced that drive with a hard drive there is absolutely NO WAY to install Windows on your Mac. It will not install from a USB key, It will not install from an external DVD drive, it will not install from any other source other than the built in DVD drive when that drive is installed INSIDE the system.

MBP Late 2010, How can I install Win7 Boot Camp using External Optical Driv

Hello:
I have a new MBP purchased in February. It's not the 2011 model. I replaced the Optical drive with an SSD drive and put the optical drive in an external enclosure. The Optical drive works great, reads, writes, etc. My Windows 7, Pro 64bit DVD works also, tested on a PC.
I use the Boot Camp assistant to create a partition. It them reboots and never starts up from the optical drive. I get an Apple logo alternating with a stop sign.
I have got back to OS X by starting with the Option key and choosing my OS X volume.
I tried booting to the DVD by using the option key, that did not work. I then choose the EFI option which allowed me to hit any key and appeared to boot from the external optical drive. Windows setup screen came up and I hit enter to start the file loading process. It eventually stopped when the progress bar was all the way across the screen. Then nothing.
Questions {Please give definitive answers, not guesses, thanks :)}
1) Is it possible to setup a boot camp Windows installation without an internal optical drive? Yes/No.
2) If yes, how?
3) I see the rEFIt utility has helped some but I read mixed reports. Will this help me boot and run Windows setup from an external optical drive? I don't want to install it if it's not known to be a certain fix.
4) Is my only options to reinstall the optical drive?
I chatted to OWC the vendor that sells the bracket. They had no idea how to install a Windows BC partition without an internal drive.
I am seriously discouraged by what seems to be Apple wanting to control everything. I had a Mac Pro and Air book in my future but now, it's on hold.
Thanks in advance,
Kevin

I tried what you are doing with a 2007 MBP, and could not get any Windows CD s to boot from an external optical drive, firewire or USB.
I think this is fundamental to Windows which won't boot from an external USB drive either even on a Windows machine (although I believe there may be complex ways of achieving this). I don't think this is Apple trying to control the world.
I ended up taking the MCE Optibay out and putting the original optical drive back in.
Just possible that something has changed between a 2007 MBP and 2010 MBP, but I doubt it.
If you want the second internal HD, you have two options:-
1. Put the Apple optical back in, install Windows, then take out the optical and refit the SSD. The external optical will still be able to install windows apps and data etc, just not boot any windows install CDs or utilities (like Paragon rescue disks). You will not be able to do a Windows repair install without refitting the optical.
2. Parallels, which has come a long way in the last two years. I am 99% certain that Parallels will install from an external optical.
Message was edited by: Mike Boreham
Message was edited by: Mike Boreham
Message was edited by: Mike Boreham

Will a minimum mbp 15'' be sufficient to run autodesk inventor smoothly in boot camp?

Similar Messages

Maybe you are looking for