Will a moderator please talk to the quality control department? If Creative even has one...

Shipping out a defective product that doesn't work out of the box is bad business. I see that my previous posts were ignored which is also bad business. If nothing is done to do something about the quality issues of the Gigaworks systems I will continue to post in this forum and every other forum that deals with multimedia speakers about many of your systems not even working out of the box. This is a $350 system, is it that difficult to check to see if it even works before packaging it up and sending it off to some unlucky sap like myself or someone else?
Again, I am out over $50 because of this and am quite upset and even more upset to see that nothing is even being done about it as there were other posts I've read of people having the same problem. I've read discussions about many other multimedia speakers and I haven't found ONE except creative systems that don't work out of the box. Sure they might fail down the road but at least they work when you first hook it up. Thank you for your time in this matter, I hope Creative does something about it as the Gigaworks otherwise seem like a nice set of speakers.

Well so much for that idea. No one contaced me so I ended up having to send the speakers back to newegg. I was wrong, it was a little less than $100.00 to try out these POS speakers instead of the $50.00 I originally thought it would cost. If you're rich and have money to burn then I suppose I would give them a try as they supposedly do sound good if you can manage to get a working set. It's no wonder local retailers like best buy don't carry them, they would be up to their neck in exchanges and wouldn't make any profit from them. I know the klipsches have their problems too that arise years down the road but at least they'll work when you take them out of the box. Talk about crap, I'd be extremely surprised if Creative ever releases another set of speakers down the road as I can't imagine anyone would even give them a try given the track record of these gigaworks. Oh well, Creative has lost my business in the soundcard market as well and I will be buying cards by other manufacturers in the future regardless of their gaming support. If Creative wouldn't take their monopoly of computer audio for granted and actually care then things might be different.

Similar Messages

  • Some users are experiencing difficulty opening certain docx files sent as email attachments. These files contain content controls to protect data in the document. Could someone please confirm that the content controls are the reason the files won't open.

    Some users are experiencing difficulty opening certain docx files sent as email attachments. These files contain content controls to protect data in the document. Could someone please confirm that the content controls are the reason the files won't open.
    These files open correctly when sent as doc files.
    Thanks

    Congrats to Saeid, Ronen, and Ricardo! Big thank you to all our contributors!
     Transact-SQL Technical Guru - February 2015  
    Saeid Hasani
    T-SQL: How the Order of Elements in the ORDER BY Clause Implemented in the Output Result
    Durval Ramos: "Very well structured and with examples that clarify how a T-SQL statement can change the data output order."
    Richard Mueller: "Good use of Wiki guidelines and great examples."
    Ronen Ariely
    Free E-Books about SQL and Transact-SQL languages
    Richard Mueller: "An excellent collection and a great idea."
    Durval Ramos: "A good initiative. Very useful !!!"
    Ricardo Lacerda
    Declare Cursor (Transact-SQL) versus Window with Over - Running Totals
    - Accumulated Earnings
    Durval Ramos: "The "Window function" sample was well presented, but it was unclear how the chart was generated."
    Richard Mueller: "A new idea that can be very useful. Grammar needs work"
    Also worth a mention were the other entries this month:
    [T-SQL] Retrieve Table List with Number of Rows by
    Emiliano Musso
    Richard Mueller: "Short but sweet solution to basic question."
    Durval Ramos: "A simple T-SQL script, but useful."
    [T-SQL] Search for Missing Values within a Numerical Sequence by
    Emiliano Musso
    Richard Mueller: "Clever solution with good code examples."
    Durval Ramos: "You need add more details about development of the idea and create a "Conclusion" section to easy understanding."
    [T-SQL] Converting Multiple Rows into HTML Format single ROW by
    Maheen Khizar (Bint-e-Adam)
    Durval Ramos: "In some situations, It's need to consume and format HTML tags for a UI, but It's important to remember that Best Practices recommend this formatting process preferably in Presentation Layer"
    Richard Mueller: "A great new idea. Some features need more explanation. Avoid first person."
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Moderator please – I want the money back that BT o...

    Could a BT Forum Moderator please look into my account, contact the department currently handling my case, and arrange a refund for the money that BT owe me back, after overcharging my account for the last 3 months.
    After my original phonecall 7 WEEKS ago, I have made a further 6 CALLS about this over the last 3 weeks. I don't want to have to phone BT about this EVER AGAIN.
    The problem started when I recontracted my Broadband/Calls/TV on the 12th March, after previously being on a high-priced old package. The order “corrupted my account”, meaning the order never got closed – which has left me being charged more than my old package was costing, on my next 2 bills. Plus, I am owed money back from my February bill, as it charges for the whole month ahead but I switched to my cheaper package mid-March.
    My 1st phonecall about this turned out to be a waste of time, as the problem wasn't even logged. I was told that “it would sort itself out” on my next bill... it didn't.
    On my 2nd, 3rd, and 4th calls, they said they would escalate the case... they didn't, I got passed around call-centre staff and had to explain the same thing over and over and over again. They finally got the order closed and my account sorted out, so that I would be charged correctly on any new bills – bearing in mind that I had received another overcharged bill in the meantime. They told me the matter would get passed on to the billing department for a refund... It didn't.
    On one of these calls I was told by a member of staff that I “wouldn't need to keep calling anymore, because it would all be sorted out”... it wasn't.
    On my 5th call I was told that a refund would be processed in 5 working days... it wasn't.
    On my 6th call I was told that a refund would be processed in 5 working days... this tipped me over the edge.
    I was put on to a Manager, Ravi, who said he would look into it, and call me back after 10 minutes... he didn't.
    I rang him back an hour later, he said he would call back within 24 hours... he didn't.
    So like most people before me, I have lost ALL FAITH in your phone support. How can I trust a manager at a communications company who can't even communicate on the simplest level by making a phonecall.
    This brings me to now. I still don't know when I am going to receive my refund. There is no dispute, everyone seems to agree that I am owed around £105.
    So I am asking for a Moderator to please...
    Be my point of contact until I receive my refund.
    Tell me when I will see my refund on MyBT, and on what date it will be in my bank account.
    Explain to me how having to make 7 CALLS over 7 WEEKS, and still not knowing if my problem is resolved, is acceptable for any issue which should always just take 1 call.
    … and please don't tell me that it will take another 5 working days. I don't believe that there isn't someone at BT that can process this same-day.
    I look forward to a reply today, so that I can pass you my account details.
    Solved!
    Go to Solution.

    Hi richiejames,
    Thanks for posting!
    I'm sorry for the problems the order created and for the length of time you've been chasing this to get your refund.  I agree, an issue ongoing over 7 weeks isn't acceptable.
    No need to worry as we'll help get you sorted from here.  Click on my username and under the "about me" section you'll see the link to get in touch with us.  If you could also include the link to this thread when you complete the form that would be great!
    All the best,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Dear Moderator, Please  unlock & close the thread 1880307

    Dear Moderator
    Please unlock the thread locked by moderator in SDN , so that I can close the thread.
    SDN Thread: =1880307
    BDC for MB21
    Please unlock, I need to closed this thread
    BR, Subbu

    Hi Subbu,
    You can directly drop a mail to SDN support([email protected]) to unlock thread. You need not raise a new thread for such questions.
    Regards,
    Durgesh.

  • How to change the background of the StackPanel control when any child element has focus?

    Hello folks!
    I need to change the background of the StackPanel control when any element within the StackPanel has focus. I am executing the code snippet below. The code works fine with elements within the Grid control named "main". It doesn't work when I focus
    an element within the Grid control named "header".
    <StackPanel x:Name="techReportStackPanel" Width="250" Background="{Binding ColorBrush}" >
    <StackPanel.Style>
    <Style TargetType="{x:Type StackPanel}">
    <Style.Triggers>
    <DataTrigger Binding="{Binding ElementName=techReportStackPanel, Path=IsKeyboardFocusWithin}" Value="True">
    <Setter Property="Background" Value="Gray" />
    <Setter Property="Opacity" Value=".5" />
    </DataTrigger>
    </Style.Triggers>
    </Style>
    </StackPanel.Style>
    <Grid x:Name="header">
    <TextBlock x:Name="headerColumn" Text="{Binding Name}" Style="{StaticResource ColumHeader}"/>
    <Button Visibility="{Binding ElementName=headerColumn, Path=Text, Converter={StaticResource delButtonVisibilityConverter}}" Command="{Binding DelCommand}" Content="x" ToolTip="{l:Translate TechReportDeleteToolTip}"/>
    </Grid>
    <Grid x:Name="main">
    <Grid.ColumnDefinitions>
    <ColumnDefinition Width="*" />
    <ColumnDefinition Width="*" />
    </Grid.ColumnDefinitions>
    <wpftoolkit:WatermarkTextBox Grid.Column="0" Style="{StaticResource OrdinaryTextbox}" Watermark="{l:Translate LengthLabel}" ToolTip="{l:Translate BoreholeSpacingInRow}" Text="{Binding BoreholeSpacingInRow, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged, StringFormat=F2, Converter={StaticResource zeroToEmptyDoubleConverter}}" />
    <wpftoolkit:WatermarkTextBox Grid.Column="1" Style="{StaticResource OrdinaryTextbox}" Watermark="{l:Translate WidthLabel}" ToolTip="{l:Translate BoreholeSpacingBetweenRow}" Text="{Binding BoreholeSpacingBetweenRow, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged, StringFormat=F2, Converter={StaticResource zeroToEmptyDoubleConverter}}" />
    </Grid>
    </StackPanel>
    Any advice and suggestions will be greatly appreciated!

    >>It doesn't work when I focus an element within the Grid control named "header".
    You mean when the Button in the "header" Grid is focused? A TextBlock is not focusable so when the Button is not visible no element in the "header" Grid will be focused since you only have two elements in the "header" Grid.
    But when the Button is visible it should work. Please refer to the following code:
    <StackPanel x:Name="techReportStackPanel" Width="250" Background="{Binding ColorBrush}" >
    <StackPanel.Style>
    <Style TargetType="{x:Type StackPanel}">
    <Style.Triggers>
    <DataTrigger Binding="{Binding ElementName=techReportStackPanel, Path=IsKeyboardFocusWithin}" Value="True">
    <Setter Property="Background" Value="Gray" />
    <Setter Property="Opacity" Value=".5" />
    </DataTrigger>
    </Style.Triggers>
    </Style>
    </StackPanel.Style>
    <Grid x:Name="header">
    <TextBlock Text="text..."/>
    <Button Visibility="Visible" Content="Button" />
    </Grid>
    <Grid x:Name="main">
    <Grid.ColumnDefinitions>
    <ColumnDefinition Width="*" />
    <ColumnDefinition Width="*" />
    </Grid.ColumnDefinitions>
    <TextBox Grid.Column="0">main grid...</TextBox>
    <TextBox Grid.Column="1">main grid...</TextBox>
    </Grid>
    </StackPanel>
    When the Button is focused the Background colour of the StackPanel is set to Gray as expected.
    If you want to be able to focus the TextBlock you should set its Focusable property to true:
    <Grid x:Name="header">
    <TextBlock Focusable="True" x:Name="headerColumn" Text="{Binding Name}" Style="{StaticResource ColumHeader}"/>
    <Button Visibility="{Binding ElementName=headerColumn, Path=Text, Converter={StaticResource delButtonVisibilityConverter}}" Command="{Binding DelCommand}" Content="x" ToolTip="{l:Translate TechReportDeleteToolTip}"/>
    </Grid>
    Hpoe that helps.
    Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't ask several questions in the same thread.

  • HT1386 my Ipad will not up date and sync the newer version software( 5.1) even after i click up date.

    I have tried over and over again add the new version of software to my ipad. it will not load it. My phone loaded IOs 5.1 and has Cloud. but the Ipad will not. I need help.? could it be something in my settings?

    Without anything more than your blanket statement that the software will not load, it is difficult to suggest anything more than the standard boilerplate stuff. Does the update start at all? Is the iPad being recognized in iTunes?
    Try temporarily disabling your firewall and anti virus software and then try to download and install the update.

  • BT Sport Picture Quality has the quality been set ...

    Hi
    I'm enjoying watching the Norwich v Aston Villa match by mirroring it from my Apple TV to my 42 inch screen . I have no blocking issues with picture now which means that the capacity issue has been relsoved thanks. Looking at the players close up the picture quality is "good" but when the picture zooms out and when you have small people on the screen the quailty of the picture moves to "low" (Large areas of constant green).
    Looks like some form of picture quality algorithm is being used to reduce the image quality.
    Can BT please comment on this please?
    If the quality can be improved a little more I would appreciate that. 
    Thanks
    Brian 

    john8123 wrote:
    - do have HD channels 101 to 104 but thought they were delivered via Freeview; there is no problem with the picture on these channels.
    No, on a BT Vision+ box channels 101-104 are HD channels delivered over the Infinity broadband connection. You can see the 'bTV' symbol displayed after the channel name for them when you change to them. On the BT Youview box then come over the aerial as Freeview HD channels.
    If you are getting a good picture for channels 101-104 over Infinity then surely that proves that there is absolutely nothing wrong with the HomeHub, the BT Vision+ box or the cabling.
    I have no idea why you would get problems with the picture for channels 507-509 (and possibly 510-512 if you get them in HD) if 101-104 are working fine. That sounds like a problem at BT's end?

  • I downloaded the new version and it has reverted to the old and will not let me re-install the new because it thinks it is installed

    I downloaded the new version of Pages and it has reverted to the old version.  It will not let me re-install the new version because it thinks it has it installed

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed over 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store.
    Peter

  • I keep getting 'Please connect to the internet and retry' error message.

    I've signed out of creative cloud on my Macbook Pro in order to use my log in details on another Mac (rented for an onsite edit abroad), I now want to return to using creative cloud on my Macbook but I'm having issues signing back in. I keep getting the 'Please connect to the internet and retry' error message even though my network is working fine, I have tried connecting on my home wifi and the network at my office. Does anyone know how I can sign in and use my Adobe apps?

    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Urget Help --- Please give me the core java code that connects to UNIX ser

    Can anyone provide the core java code that connects UNIX server after verifying credentials and allow to implements UNIX commands through java program?

    no, you don't want to do that.
    You want to connect yourself, which Java is quite capable of doing, rather than go through some 3rd party client program that's not only specific to a particular operating system but not guaranteed to be installed at any particular machine or if it is to be installed in such a way that you can start it from your Java program.
    And then there's the little matter of figuring out the external API to use that program in the way you intent to (if it has one).

  • Can't figure out how to turn the Sharing control back on in iTunes

    Recently, I have begun using Limewire to download music. A few days ago a message came up on my computer that said something like "The Sharing Control on your iTunes playlist has been turned off".I can't figure out how to turn it back on, and I have done everything.Please, someone help!
    eMachines   Windows XP  

    Well, there could be one of two problems, your Itunes sharing could be turned off, or your limewire sharing could be turned off.
    To fix it in iTunes:
    Click Edit
    Choose preferences
    Click on the parental controls tab
    Uncheck the box that says "Disable Shared Libraries"
    To fix it in Limewire:
    Find the options window
    On the left side there should be an options for iTunes
    Click on the arrow and one should allow you to automatically share with iTunes

  • Hide the custom control while changing the tab

    Hello Experts,
    I am using many screens & subscreens in my application. In a tabstrip control, I am calling one subscreen which has Custom Control to display the text editor.
    When I change the tab say for ex from TAB1 to TAB2, the custom control with text editor remains at the same place. In TAB2 I dont want custom control of TAB1.
    Thank you to go through my query.
    Regards,
    Bhavina
    Edited by: Rob Burbank on Aug 23, 2010 5:12 PM

    Hello Alej,
    I have created one subscreen which i need in a tabstrip control. Now this subscreen has one Editor Control (CL_GUI_TEXTEDIT->TEXT_EDITOR)  which I put on Custom Control. Custom Control is placed in the subscreen with SE51.
    to put the editor control  of CL_GUI_TEXTEDIT, I need Custom Control on screen. And I didnt find any property using which we can hide custom control.
    Is there any way using classes or methods, can we put Editor Control without using the custom control of screen.
    I think in your prob, you had ALV, that we can put on another subscreen, but in my prob how can we remove custom control Please Explain.
    Thanks & Regards,
    Bhavina

  • MB Quality Control

    My MB is just under 11 months old and I've now had two problems that I've had corrected under AppleCare. The first, about 2 months ago was a problem with the MagSafe input. That resulted in shipping the unit out of state for the fix which took about 3 days to fix.
    The second problem happened last week when the Super Drive stopped working and rejected all DVD's/CD's after a couple of minutes of whirling. This problem was corrected locally at my Apple Store and took 2 days to swap out the Super Drive. Since I've had the computer, I've used the optical drive only a few times without any problems. I have noted that I would occasionally hear a whirling sound while the computer was in the sleep mode and figured this was nothing to worry about although it did seem strange to hear the drive whirling up when there was no DVD/CD in the unit.
    While I can't say enough about how good the AppleCare service has been, I wonder about the quality control and durability of my MB which by the way, mostly stays in my living room. I think I've only had it out of the house less than 6 times so it's not getting "banged around".
    Based on my experience as stated above, about a week ago I signed up for another 2 years of AppleCare. While generally I don't subscribe to the idea of buying extended warranty plans, I think it's a wise idea to get it for Apple computers (if you're going to keep them more than a year). Even if you don't keep them a year, the extended warranty should be a big selling point when you do get ready to upgrade.

    Hi,
    Ref the link below
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/QMQCSPC/QMQCSPC.pdf
    Regards
    K.M.Arun

  • Error:I am the PlaceHolder control

    Hi,
        The IE displays the form correctly, but when we actually take the print out, I see error
    Error:I am the PlaceHolder control.
    This is happening to one particular user.
    Thanks

    Venkata,
    Check this thread and see if it helps.
    Adobe Form does not display "I am the placeholder control" displays instead
    Chintan

  • Can't get the applet control from a form page

    Hi,
    I need to get the applet control in a browser which has loaded an oracle form component.
    When i use jinitiator, i get the control as sun.plugin.ocx.ActiveXAppletViewer., but when i use jre for running the oracle forms, i am not able to get the applet class. I observed with the control hierarchy with Monkey, the java accessibility tool, but I coudn't find any applet class.
    Kindly help.
    Thanks & Regards
    Sunil

    Hi,
    Sorry for the incompleteness in the post.
    1. What is the complete Forms version you are using? Do not reply with something like 6i, 9i, 10g, etc. These are product names and not versions.
    10g Release2
    2. What is the client platform (operating system) and version?
    Windows XP Professional Version 2002, Service Pack 3
    3. Which browser and version are you using?
    IE version 6.0.2900.5512.xpsp_sp3_gdr.090804-1435
    4. Which JInit and Sun JRE version are you using?
    JInit-JInitiator 1.3.1.22, Sun JRE- 1.6.0_17
    5. Are you seeing this problem with Developer Suite or Application Server or both?
    I am working on Developer suite.
    6. Provide the complete contents of the Java Console after the failure occurs.
    My issue is that I am not able to identify the applet class.I am not getting any crash as such.
    7. Does the person running the form have Windows Administrator or Power User permissions?
    Windows Administrator
    Let me elaborate the query again.
    I need to get the applet object of the page that loads the form. To get the applet class, I have written a listener class and print the name of the classes that get created. This way, I identified that the class sun.plugin.ocx.ActiveXAppletViewer, is the applet created in the IE when the form is loaded using JInit.
    Also, I can see the same applet class in the monkey tool once the page is loaded.
    HOWEVER, when I use SUN JRE to load the form, the action listener class doesn't identify any applet class. The monkey tool also fails to show any. The class I get in this scenario is sun.plugin2.main.client.PluginEmbeddedFrame.
    I assume that there should be some applet class present to load the form irrespective of whether it uses JInit or Sun JRE.
    Kindly correct me if I am wrong.
    The console log is as follows
    Java Plug-in 1.6.0_17
    Using JRE version 1.6.0_17-b04 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\sunil
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    q: hide console
    r: reload policy configuration
    s: dump system and deployment properties
    t: dump thread list
    v: dump thread stack
    x: clear classloader cache
    0-5: set trace level to <n>
    com.sun.deploy.util.ConsoleWindow
    javax.swing.JRootPane
    javax.swing.JPanel
    javax.swing.JLayeredPane
    javax.swing.JPanel
    javax.swing.JScrollPane
    javax.swing.JViewport
    javax.swing.JTextArea
    javax.swing.JScrollPane$ScrollBar
    com.sun.java.swing.plaf.windows.WindowsScrollBarUI$WindowsArrowButton
    com.sun.java.swing.plaf.windows.WindowsScrollBarUI$WindowsArrowButton
    javax.swing.JScrollPane$ScrollBar
    com.sun.java.swing.plaf.windows.WindowsScrollBarUI$WindowsArrowButton
    com.sun.java.swing.plaf.windows.WindowsScrollBarUI$WindowsArrowButton
    javax.swing.JPanel
    javax.swing.JButton
    javax.swing.JLabel
    javax.swing.JButton
    javax.swing.JLabel
    javax.swing.JButton
    sun.plugin2.main.client.PluginEmbeddedFrame
    Reading certificates from 137405 http://164.67.34.102:8889/forms/java/frmall.jar | C:\Documents and Settings\sunil\Application Data\Sun\Java\Deployment\cache\6.0\36\1a4500a4-49be8669.idx
    oracle.forms.engine.Main
    Loaded image: http://164.67.34.102:8889/forms/formsdemo/images/iorganizer.gif
    Reading certificates from 11 http://164.67.34.102:8889/forms/formsdemo/jars/iorganizer.jar | C:\Documents and Settings\sunil\Application Data\Sun\Java\Deployment\cache\6.0\23\b018557-49b3d76d.idx
    oracle.forms.engine.Splashscreen
    Loaded image: http://164.67.34.102:8889/forms/formsdemo/images/bannerlogo.gif
    Loaded image: http://164.67.34.102:8889/forms/formsdemo/images/white.gif
    oracle.ewt.event.tracking.GlassMouseGrabProvider$Proxy
    oracle.forms.ui.mdi.MDIContainer
    oracle.ewt.lwAWT.LWComponent
    oracle.ewt.lwAWT.LWComponent
    oracle.ewt.imageCanvas.ImageCanvas
    oracle.ewt.EwtComponent
    oracle.ewt.scrolling.scrollBox.ScrollBox
    oracle.ewt.scrolling.scrollBox.ScrollBox$1
    oracle.forms.ui.FormDesktopContainer
    oracle.ewt.scrolling.scrollBox.EwtLWScrollbar
    oracle.ewt.scrolling.scrollBox.EwtLWScrollbar
    oracle.ewt.lwAWT.LWComponent
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    Forms Applet version is : 10.1.2.0
    oracle.ewt.lwAWT.lwMenu.LWMenuBar
    oracle.ewt.lwAWT.LWComponent
    oracle.ewt.lwAWT.lwMenu.LWMenu
    Loaded image: jar:http://164.67.34.102:8889/forms/java/frmall.jar!/oracle/forms/icons/frame.gif
    oracle.ewt.event.tracking.GlassMouseGrabProvider$Proxy
    oracle.ewt.button.ContinuousButton
    oracle.ewt.button.ContinuousButton
    oracle.ewt.button.ContinuousButton
    oracle.ewt.button.ContinuousButton
    oracle.ewt.event.tracking.GlassMouseGrabProvider$Proxy
    Reading certificates from 137405 http://164.67.34.102:8889/forms/java/frmall.jar | C:\Documents and Settings\sunil\Application Data\Sun\Java\Deployment\cache\6.0\36\1a4500a4-49be8669.idx
    I hope my query is clear now.
    Thanks & Regards
    Sunil

Maybe you are looking for