Will a Mountain Lion install USB work with putting Mac OS on a brand new hard drive?
My MacBook Pro's hard drive has crapped out and I'm planning on purchasing a new hard drive for it. However, this new hard drive will be completely clean and no remnants of Mac OS will be on it when I receive it. But before my hard drains crapped out, I made a Mountain Lion install USB like the one made here: http://osxdaily.com/2012/02/17/make-bootable-os-x-10-8-mountain-lion-usb-install -drive/ . If I install this new hard drive into my MacBook Pro, turn the computer on, and hold down the Option key, will I then be able to install Mac OS with this USB drive? If not, please explain the steps that I need to take in order to successfully install Mac OS onto a brand new hard drive.
P.S. I do not have the install disc from when I bought my computer.
You can use the USB drive you created previously to install OS X in your new hard disk. Also, you can use Internet Recovery, if you want to > http://support.apple.com/kb/HT4718
After installing the hard disk and starting from the USB drive, follow the steps to reinstall OS X. If there isn't any partition on the hard disk, close the installer and open Disk Utility.
Then, choose the hard disk at the top of the sidebar, go to Erase tab and erase the disk. After erasing the disk, close Disk Utility and reinstall OS X
Similar Messages
-
Does anyone know how to reboot this or re-download? It doesn't seem obvious ...
What do you mean by "2010" version? Which version of PSE is this? And did you try to move it back to the new drive via Migration Assistant or something like that?
-
I have a 2008 macbook pro with brand new 500GB hard drive and 6GB new RAM. My old hard drive is backed up on external drive, via time machine. When the shop put in the new hard drive (there was nothing wrong with old one, it was just stuffed to the brim), they loaded snow leopard from a disk, but I haven't put anything from the old drive back on yet....I haven't even configured my mail and am just reading mail from ipad and phone these days.
Question: Should I install Lion before I restore all the old backed-up stuff, or is it important to have anything, ( like maybe preferences) already on the computer when I download Lion. I want to be selective when restoring from time machine, because my old hard drive had a lot of ancient software and junk on it that had migrated from every computer we've ever owned, and that is many, many.
So, I'm just stuck on the best way to proceed. Also, should I install the latest update for 10.6.8 before I download Lion? I see today that some new updates have become available; java, security, safari, and apple software installer.
Thanks
G.T.Gaye Thomas wrote:
But I just read your next post, and it sounds like you think I should do the back-up first, or am I missing something. I think you are now recommending that:
1. First I should install Snow Leopard,
2. do the combo update of 10.6.8
3. THEN USE BACKUP to restore what I want to carry over to new drive.
4. Then upgrade to Lion.
I would restore SL and do the Combo 10.6.8 update. Then use your backup to load back in what you want. Then do the upgrade to Lion.
So what made you change your mind?
And, just to say again, the hard drive is completely new. The shop installed 10.6.8 from the installation CD, and I haven't even configured email. I'm only using safari. I just now downloaded 4 updates that software updater recommended. It now tells me it is up to date. Is there any reason to do a 10.6.8 combo updater?
Are you recommending to do the back up BEFORE I install Lion, so that there are some preferences and information about old passwords and certain information that Lion will want to know about? Will it make my life easier to back up BEFORE I install Lion?
What changed my mind was your second post. You don't want to carry over everything to the new drive and the install of Lion. You only want selective things and of course your personal files.
For that I "feel" it best to install SL, Update SL to the most current version, Then selectively restore the parts you want and then install Lion on top of that newest install of SL with the selectively restored parts on the new Hard drive.
That should give you as clean an upgrade as you can get.
Of course you could go a completely different route. Make the Lion install USB, Save all your program Install files you want to be installed in Lion along with your personal files. Then Wipe the drive and install Lion clean. Then RE-Install your programs and copy over your personal files.
That is what I would do as I do not like upgrading to a new OS over the top of an older one. I have never found that to be as clean and it always seems to carry over stuff from the older OS to the new one. But that is me. -
On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder
Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.) -
Will an iPhones 4s wall charger work with a 5s if I buy the new cord?
Will an iPhones 4s wall charger work with a 5s if I buy the new cord?
You're welcome
-
I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me
Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.
-
Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive
Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive.
Tried to reset pram, smc, nvram.
Tried installing new RAM.
Tried installing new hard drive.
You should know that my internal drive is installed in a cheap external case and plugged in a USB 2.0 port because i am waiting for a new hard drive cable.all
Yep all good things happened to me...i don't know if all these problems are linked, ahh and also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost. My computer is not under warranty anymore so i'd like to avoid a trip to the Apple store but i'm close to doing just that.
Any help appreciated...It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
That said, the two comments:
Le husky wrote:
Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
.....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
In any case, good luck. -
Install to brand new Hard Drive
13" MacBook Pro would no longer boot (2010 model). Took into the Apple store and they tell me the hard drive is fried.
I bought a new hard drive, replaced it and held 'c' down during boot to load from the install DVD that came with the system when I bought it.
I'm now forever stuck at the gray Apple logo with the gray swirly circle below it. Can hear the DVD spin up and down over and over - doesn't go anywhere.
Can anyone tell me what's going on here and why I can't boot off this DVD to install the OS to this brand new hard drive?I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer ) -
Hello, I just recently replaced my internal hard drive in my MacBook [from a 250gb to a blank/empty 750gb]. I managed to get OS X Snow Leopard installed with the DVD. Setup seems to run fine at first, I get the screen in space with the welcome message different languages while music plays. Then I'm asked to select my country, then here is my problem- the next screen asks me to "Select Your Keyboard", I select & click "Continue" button, then my Mac is just showing the spinning beachball & it stayed that way all night =( I don't know how to fix this. Anyone experience this or have any solutions for me? I'd appreciate any help! Thank you! [I've been googling since yesterday with no luck on finding an answer].
It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
That said, the two comments:
Le husky wrote:
Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
.....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
In any case, good luck. -
Installing MAC OS X on a brand new hard drive
i recently installed a brand new hard drive, and i was wondering how i install OSX on it
do i just put in the cd or is there something i have to do?
thanksit worked
thanks
but i actually have another problem
a year ago (whenever the newest Mac OS came out), i upgraded the OS.
in the middle of installing the OS, i got error messages, and i had to restart the installation a couple times before i finally got through.
when i tried to install OS X on my new hard drive, the same error message came up.
anyone know whats wrong with my computer?
thanks for all your help by the way. -
Will the Zen Micro removable disk work with a Mac Comput
I know that certain macs have a USB port, so is it compatible with the ZM removable disk? Can I plug my ZM into the Mac via USB port, and transfer files through the removable disk function?
Yes, the removable disk will work with the Mac.
-
Mavericks will not install on brand new Hard Drive
Trying to install Mavericks to a brand new internal 2TB Samsung SATA 3.0 HD on a 3-yr old 12 Core Mac Pro system that was running Mnt Lion just fine. After multiple failures upgrading the Mnt Lion disk to Mavericks. Decided to just use a brand spankin' new hard drive and do a clean install of Mavericks. Now during the install to the NEW DRIVE, getting error message "Mavericks cannot be installed." Then I reboot and try to force the continuation of the install, doing this repeatedly, and I sometimes get a error log instead of a just an error message. Error log says: Thread 34 Crashed:: Dispatch queue: com.apple.root.high-priority. Then the 1st line listed under that is: 0 libsystem_platform.dylib 0x000000010fa5a06a _platform_memmove$VARIANT$Nehalem + 138. If anybody knows what any of that means?
Thanks.Without the full listing of the trace I can't be sure, however it would look more like a bonafide logic board or memory error rather than the HD that's causing the problem. The low level drivers on Mavericks have obviously changed (otherwise it wouldn't be a different OS version) and possibly they're exposing a lack of performance in your memory. The actual Mavericks install may not be the problem, but rather being corrupted during installation. In the line you quoted, Nehalem is the Intel name for your CPU, the memmove operation failed (move blocks of memory contents from point A to point B) and they shared library containing this was in the system library....sort of critical stuff.
You could try the following:
Re-seat the RAM and try again.
Try an old OS installation and see if it succeeds (Snow Leopard, Lion, Mountain Lion, etc)
Try an install to an external enclosure
If re-seating the RAM does the trick, then you're set.
If it doesn't, then install an older OS to see if they work OK. If older OSes work OK using the internal drive and you have after market memory in the system, it would imply to me that the memory probably isn't quite up to snuff and Mavericks is exposing it. If it's original memory then it should be OK.
If the older OSes now don't install correctly and it's giving similar problems try doing the install in an external enclosure. The point here being to try to move your data path off the internal SATA cable. If these install OK, try it with Mavericks. If any of these work it could be the SATA cable or I/O controllers on the logic board (SATA cable most likely). A good reference for these sorts of problems is:
Bad Hard Drive Signs and Symptoms
Possibly a last option, which I would think (or hope) would be rare, would be that the binary for Mavericks install got corrupt during download. You could also try some of the resets they have in the linked document above. They might work and it doesn't take any effort.
Good Luck -
I Get a panic we are hanging error when trying to install the os on a new hard drive on a G5
Yes, the hard drive needs to be formatted and OS X must then be installed.
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit Disk Utility and return to the installer. Proceed with the OS X installation.
It's only a lost cause when nothing else works. -
I can't install Snow Leopard on a brand new hard drive with a brand new optical drive.
I need help please. I have a 2009 MacBook Pro. The hard drive crashed a while back so I bought a new one. The original Snow Leopard disc that came with it was scratched so I bought a new one of it as well. After trying/failing to install Snow Leopard on the new hard drive about a dozen times I bought a new optical drive as well. I installed the new optical drive today, tried to install Snow Leopard again and STILL got the same installation error messages. Any help that anyone might be able to provide would be greatly appreciated.
Last error message:
Install failed: The Installer could not copy the necessary support files.Did you partition and format the new drive first?
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Upon completion quit Disk Utility and return to the installer. Complete the Snow Leopard installation. -
Installing operational system (MAC OS X) on a new hard drive
Hey Guys,
My Mac Pro came with 250GB of hard drive so I bought a new hard drive, installed it (1TB) and it works just fine but; how can I transform this disk so It can become my main hard drive?
- Do I have to install Mac os X on it? (how do I do that?)
- Is this even possible?
I just want to have more space on my hard drive when working on big projects (graphic design) cuz I only have like 30 GBs of space on my main one so the 1TB one works for me just as an external drive but inside of my Mac Pro.
Can someone give me a hand on this?
Thanks!I would buy more drives.
Clone your current drive to the 1TB, yes.
SuperDuper $29 is your bet shot.
Keep the old drive as backup.
Use #3 as new backup/clone or for TimeMachine.
Migrate all your project files to drive #4, just change the application preferences to new location.
Shame you waited so long. New drives will also give you a bit better disk performance.
Maybe you are looking for
-
Renaming the Physical Filename for Datafiles in SQL Server 2008
Can anyone tell me how to change the physical filename of the datafiles? There doesn't seem to be any documentation on this, yet its quite easy to change the logical filename.
-
I switched from iphone 3GS to an iphone 4. Now itunes won't sync my apps, music, etc
I switched from iphone 3GS to an iphone4. Now itunes won't sync my apps, music etc? I'm using the current version of itunes for win7.
-
How do I find the URL of a movie I wish for your downloading schedule?
I have added on the download schedule to your "tools" drop down menu. It asksfor the URL of the movie clip film or whatever. How do I find ths URL. A friend said hover over the movie while it is playing and drag and drop. but this doe not seem to wor
-
MacBook Pro doesn't see my Ipad
Forgive if this has been posted elsewhere but i looked and could only find Ipod issues. All of a sudden my MacBook doesn't see my Ipad (1st generation). it just worked yesterday and I've done no updates and the cable is in working order. When i plug
-
Checksums don't match so I can't install JRE (Sparc)
Hi all: I download both files sparc.sh and sparcv9.sh twice with sun download manager and without it. Both version 1.6.X and 1.5.X; checksum of both .sh (without sdm) 44403 41851 jre-1_5_0_16-solaris-sparc.sh 11238 18003 jre-1_5_0_16-solaris-sparcv9.