Will a NAS Plugged into a Non-Airport Wireless Router work with TM?

Will a NAS Plugged into a Non-Airport Wireless-N Router work with TM?
I'm looking for a backup solution for my new MacBook Air and I don't want to spend $200 extra for a Time Capsule when an NAS would do the job.
Any guidance would be appreciated.

No. TM will not backup to any NAS other than Time Capsule

Similar Messages

Will I lose all of my documents saved on my Time Capsule if I reset it in order to get the Airport wireless router working again?

Hello I am having problems with my Time Capsule (2nd Gen) and being able to get the wireless signal working throughout my house. I have concluded the only step I need to try to fix this is to reset the Time Capsule.
My concern is that if I reset the capsule I will lose all of the documents off of the external hard drive of the Time Capsule. Will this happen?
Is there anyway to avoid losing these files, or is there some way to attach a USB cord to the Time Capsule and be able to retrieve my files?
Thanks for any help out there.

Correct.. no files are lost in resets..
Plug the TC straight into the computer by ethernet.. use a LAN port of the TC. <-->
Factory reset.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Factory reset Gen 5
Hold in reset for about 5sec until the status light flashes quickly.
If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.
When it comes backup the TC will have an IP of 10.0.1.1 and the computer will be 10.0.1.2
You can access all your files on the TC.. with very minimal setup.. but Mavericks can be a right royal pain.
If the disk doesn't show up in Finder.. manually mount it.
Go, Connect to Server..
AFP://10.0.1.1 and when the computer finds the resource it will ask for a password.. type in public unless you changed it.
You should now be able to access the files.
I recommend if you have important stuff on the TC you do not want to lose.. get a USB (or faster) drive today.. plug it into the computer and make a backup.. the TC is not adequate as a NAS or file server as it has no ability to either backup itself or even have TM back it up.

Which non apple modem/router work with airport extreme

Hi
My old modem needs replacing. It currently feeds into my airport extreme and an airport express extends the network to my office in the garage. Ideally I want an 'n' speed modem/router and use the airport extreme to extend the network in the garage, doing away with the airport express's slower speeds.
Are there any non apple modem/routers that will work with the airport extreme to extend the network.
Many thanks

+Are there any non apple modem/routers that will work with the airport extreme to extend the network.+
Not if you are planning to "extend" using wireless only.
If you are planning to extend the network by connecting to your new modem/router using an ethernet connection, you have some configuration options to choose from in that case. Post back if you need more details about this.

Can't make Airport Extreme router work with non-Apple device

I am trying to help a friend who has a PC (Windows 7) that has a wired Ethernet connection to his girlfriend's Airport Extreme router. He wants his Internet-capable Blu-Ray player and her IPad to wirelessly access the Internet via the Aiport Extreme router, with both the Blu-Ray player and the IPad's Internet access protected by WPA-2 encryption (both devices are capable of WPA-2). How do I do this?
Here are the problems we've run into:
1) The Airport Utility for Windows (5.6.1) has been installed on the P.C., and we've used it to update the firmware on the Airport Extreme router. However, after we followed the Aiport Utility instructions to set up the network, all the router wanted to do was look for an Apple device. His girlfriend and her IPad are out-of-town right now, so the only device within range was the Blu-Ray player, and the router did not see it. Not only that, but almost all the menu options on the Airport Utility were "greyed out" (unusable), except for "Configuration." I am very troubled by the fact that the Airport Extreme router seems to want to look only for Apple devices.
2) In order to get Internet access for his Blu-Ray player for the time being, my friend pushed the "reset" button on the Airport Extreme router, and he can now use his Blu-Ray player for Netflix and other Internet streaming options. However, the Blu-Ray's wireless Internet access is an unencrypted connection, and the Airport Extreme router is displaying a flashing amber light -- not a good situation.
3) Although I know his girlfriend could access the router via her IPad when she returns, she is French-Canadian, and her IPad operates in French. I happen to know some French, but I have enough trouble trying to understand wireless networking terminology in English without having to try to figure out the equivalent terms in French. Thankfully, the Airport Utility for Windows on his P.C. is in English, so that's what we've got to use to solve this problem.
I have profound respect for Apple products, but I'm a Windows/Linkysis router guy, so that's why I'm stumped. Can anybody out there help me?

Which model of the AirPort Extreme Base Station (AEBS) do they have? What is the version of firmware that you updated it to?
By default, the AEBS will broadcast an unsecured Wi-Fi network with a network name (or SSID) of something like Apple Network NNNNNN. This would be similar to a Linksys when first powered-up.

Non Airport wireless router & shared usb printer w/ AX

I think this is possible, I hope so. This Sunday I hope to set up 3 photo viewing stations at a soccer tournament I will be covering with many other photographers. We upload our images to Exposure Manager nightly. The center has wireless internet we can access to bring up the website on laptops running a kiosk browser. The viewers can order prints online via credit card. I would like the multiple viewing stations to be able to print out receipts to a shared laser printer (Brother 2040). The printer works fine connected to an Airport Extreme or Express. The dilemma is the laptops must be connected to the sport centers wireless network for internet access and I don't see a way to connect to both Airport and the sports centers router at the same time. If the airport was able to pick up the wireless internet connection (wirelessly) the system would work perfectly. Any ideas?? Thanks!

In Airport Admin (for the Extreme or Espress with the printer), turn off "Distribute IP Addresses." This makes the Extreme/Express a wireless access point with the Other router remaining as the master - all computers (even if they try connecting through the AEX) are then in the same network (and can see the printer). (You can also change the broadcast channel of the AEX.)

Best non-Airport Wireless Router

Hi folks.
Have a need for a brand new wireless router for an iPod 3, MacBook Air, and a potential iPhone 6 or maybe a 5C. Airport is $99, and she's cheap, so I'm looking for some great alternatives. Over the years I've had good and bad versions, and I'm soliciting experience from others for recommendations on other makes/models.
Thanks in advance.
Cheers

After the death of my AirPort about 18 months ago I decided on a NetGear dual band router which was about $70 less expensive than the Airport Exteme and since I'm a tech there was no reason not to. This is the router recommended as second best at the shop where I work part time. The first thing I was reminded of after my purchase is how 'fun' it is to configure third party routers. It took me three attempts to get it all configured the way I wanted and each reboot of the router took nearly 5 minutes. I'll not regale you with the hardware/firmware issues I dealt with over the next year, it was most un-Apple like. When the router died just outside of the warranty period I paid for the AEBS and frankly I wish I hadn't tried to save the $70. The fact that Apple updates the AEBS firmware and lets the user know in and of itself makes the extra $$$ worth it.

Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive?

Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive? Apple support tech tried to tell me it wasn't possible and that the only NAS Time Machine could back up to is the Time Capsule, but I'm not buying it. I know it's doable, but I'm having a hard time figuring out which External HDDs will work and which ones won't. If not My Book for Mac, is there an External HDD that will work? (Running OS X 10.9.1 - Mavericks, btw...)

Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
The exhaustive list of devices supported by Time Machine amounts to the following:
AirPort Time Capsule's built-in hard disk (any model)
External USB hard disk drive connected to a Time Capsule (any model)
External USB hard disk drive connected to an AirPort Extreme (current model only)
A hard disk drive directly connected to your Mac
That is all.
Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents.

I am currently using the Airport Express to work with a Bose Wave radio. 3.5 MM jack out and phono connectors into Bose. Is there a way to hook to a new Bose Wave which does not have phono input plugs?

I am currently using the Airport Express to work with a Bose Wave radio. 3.5 MM jack out of the Express and phono connectors into Bose. Is there a way to hook to a new Bose Wave which does not have phono input plugs?

The latest Bose Wave SoundTouch music system still uses a single 3.5 mm analog Aux port. You would connect the two using an analog audio cable with 3.5 mm stereo jacks on either end.
An example cable would be located here.

Will a wireless printer work with airport extreme?

Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.

Yes, it will as long as it is within wifi signal range of the Extreme. Of course, you'll need to go through the printer setup sequence. NOTE: The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods. However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.

With brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

Having same issue here:
https://discussions.apple.com/message/19043181#19043181

I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?

I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?

Charge it up fully. Toggle the hold switch. Try getting into diagnostics mode again. See Corrupt iPod classic.
tt2

Can't Get Airport Express To Work With ATT's Uverse

For years, AE worked just fine with my 2Wire portal streaming music to my stereo. Went to Uverse 2 months ago, and AE quit working. I am not using an Airport base station, just the Uverse modem and I need help getting it to work.
There is nothing in this forum when I search for uverse, so I post this in hope someone can help me.
I reset AE it and it finally appeared in Airport utility with a yellow light. I click configure and when I choose to join my current network, it sets up it's own Apple network, removing it from Airport utility and changing Airport status in Network to yellow.
No matter what I do or how I try, I just can't get AE to work with the stock 2Wire modem.
Has anyone been able to get AE to work with just the 2wire router & not have to buy an airport base station.
Any help is REALLY appreciated, as I wanna hear my Christmas music, and it's turning me into a Grinch!
Thanks!
Message was edited by: Chris Winkler1

+However, it asks for the security and all I see is WEP in the Home Network set up, I don't know if it's 40 or 128+
AT&T set this up, so only they can tell you for sure. My guess would be WEP 128 since this type of security is stronger than WEP 40.
+And it asks for a wireless password. I entered the one from the router & it did not work. Tried the Key and it did not work.+
This is the same wireless password that you would use if you were logging on to your wireless network with your computer. But, unless you first have the exact, correct security setting for your 2wire router, the password will not work.
+Has anyone out there successfully got their Airport Express to work with Uverse????+
I don't provide instructions to anyone on the forum unless I've first done it myself. I'm providing you with the same instructions that I used to help a neighbor with his 2wire Uverse setup last week. It works fine.
But, he called AT&T to ask them what security setting they used on his 2wire router. Otherwise, we would have had to try each possible setting to see if we could make it work.
AT&T also told him that his password should be 13 characters, all lower case letters with no spaces. That is what the neighbor said he used. I cannot confirm this as he did not share his password with me.
AT&T may have set up the password criteria differently on your router. You need to confirm with them on this.
+What password goes in the Base station tab, Key or Password?+
Any password you want. This is a separate password simply to be able to access the settings on the device in the future when you are using AirPort Utility. You could use your wireless network password if you want.
Please post back on your progress.

Airport express not working with apple products

We have been trying to get airport express to work with a macbook pro, ipad2, iphone, laptop, htc wildfire - havent even tried the air music or printer yet!
We have a green light on the airport express which is connected to an ntl cable modem(virgin media network).
Currently the only thing that will connecy is the laptop and my htc phone. All the apple products will not connect?
We went to the apple store today and it worked grand when it was plugged in - the apple products all worked.
The network comes up on ipad2 but when you press connect it says 'unable to connect'
can anyone help us please?
thank you

I have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.

Can I use a non apple wireless hard drive with time machine?

Can I use a non apple wireless hard drive with time Machine?

Some NAS (network storage) systems do claim to support Time Machine, with varying levels of success. For example, the Synology units have this feature. They're not officially supported by Apple, though.
Matt

HT1331 I just bought a airport wireless router I have a time warner cable modem. I have hook up the modem correctly to my new apple airport router and my modem is not working with the apple airport router. what do i need to do?

I just bought a airport wireless route and I have a time warner modem. My problem is my modem is not connecting to my apple airport router. What do I need to do?

Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE>

Will a NAS Plugged into a Non-Airport Wireless Router work with TM?

Similar Messages

Maybe you are looking for