Will a new 320gb hard drive work on a mac book pro 3,1

purchased new 320GB hard drive for a mac book pro 3,1.  Old HD has link speed of 1.5GB, new HD transfers at 3GB.  New HD will not boot up.  Can link speed be changed on mac book pro 3,1.

Have you already initialized/partitioned the new drive? If yes, you've installed the operating system on it, and it doesn't boot? You've tried a safe-mode boot (hold the shift key when booting)?

Similar Messages

  • Will a new 320gb hard Drive work in a T60p?

    I have a T60P, Vista Business, latest bios.
    Specifically, I would like to install a Western Digital Scorpio, 320gb, 7200rpmm sata drive. It is the same dimensions and has the same connections as the origional drive.
    Any suggestions would really be apprecieated.
    Thank you
    Message Edited by Jadecarver on 06-13-2008 11:59 PM
    Message Edited by Jadecarver on 06-18-2008 08:12 AM

    No problem Jade.  I haven't really been able to compare with a 7200, but it's my understanding that there's not a whole lot of noticeable difference.  Also a 5400 runs cooler, which can only be a good thing.
    This system is running extremely fast.  Just make sure that with Vista, you're loading only the startup programs that you need.  Also, turn off "search indexing" on the drive.  It really slows things down and I've found it's useless.  Vista can be a real dog if you don't set it up properly.

  • My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday.  After restoring my data, Safari will not open.  The error message I continue to receive is "Safari quit unexpectedly"  Should I just delete the application and download a new?

    My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday.  After restoring my data, Safari will not open.  The error message I continue to receive is "Safari quit unexpectedly"  Should I just delete the application and download a new one?

    http://swcdn.apple.com/content/downloads/37/23/041-5058/lr5tynbldi18zcrqo8a8uq88 rnjushqliu/Safari6Lion.pkg 
    Here you go.....

  • External Hard Drives and iTunes, on Mac Book Pro and PC?

    If you transfer your iTunes library from PC to an external hard drive, can you use itunes, from the external hard drive when you plug it into Mac Book Pro?
    I'm very confused about this!
    All my music is on PC and I want to save it to my external hard drive. But I will no longer be using that PC afterwards.
    I would like to use itunes on my Mac but it only has 128 Gb, not enough storage for my iTunes library.
    So, can you use your transfered itunes library from the PC to external drive on your Mac?
    Another question I have is, when your itunes is on your external hardrive can you still sync, make playlists and add new songs?
    I don't know very much about external hard drives, but I need the space.

    No.  Likely the drive is presently formatted NTFS which is no good on a Mac unless you want to buy spcial software to enable it (given your scenario it is not worth it).  The best format for Mac use is MacExtended, but your PC cannot write files to that.  The intermediate solution is to reformat the drive to DOS FAT, but as I already said this isn't ideal.
    If it were me I would:
    1) With the PC copy the entire iTunes folder to the current external, presumably formatted as NTFS.
    2) Buy the new second drive I know I will need for backing up both my computer and my old external drive.  Format it as Mac extended.  In the long run you want to configure this for use with Time Machine but I can't help you with that because I can't run TM.  For the time being you are using it to temporarily store files.
    3) Using the Mac make sure the new drive is formatted to Mac extended.
    4) On the Mac copy the entire iTunes folder from the old drive to the new.
    5) With the Mac reformat the old drive to Mac extended.
    6) With the Mac copy the entire iTunes folder from the new drive to the old one which is now in the Mac friendly format.  Start iTunes with the option key held down as described earlier.
    Others may be able to help with some details on formatting drives because I use an older system.  I know with my system version when you reformat or partition you lose all files on a drive which is why you have to have somewhere to temporarily store your library. I think they did some changes but I am not sure of the details.

  • I transferred data from my external hard drive to my restored Mac Book Pro via migration assistant and now my external hard drive in time capsule has red minus signs. How do I get rid of that without getting rid of any of my data?

    I used Migration Assistant to transfer my data from my external hard drive via Time Capsule to my restored Mac Book Pro. When I now go into Time Capsule I there are red minus signs in the corner of all the folders that are contained in my back up. How do I get rid of this and access my previous back-ups?

    Select the drive and Finder > Get info and at the bottom "ignore permissions on this volume"
    You can copy the files, but the ownership on the files still belongs to the other user account, once your done copying, then perform a #6 Reset Users Permissions and that will set all the ownership to that account.
    ..Step by Step to fix your Mac
    Another method is to copy the entire folder, then change it's permissions.

  • How do i move my photos from external hard drive to my local mac book pro hard drive?

    I have my iphoto files on an external hard drive.  I need to move them to my local Mac Book Pro Hard drive and I want to do it accurately.  Anyone have any advice?

    THanks Niel.
       In typical "me" fashion I asked the question and then did the leg work and researched the answer (instead of doing the research first!).  I learned exactly what you have posted here.  It sounds REALLY simple.  Thanks!

  • How can I increase hard drive space on my mac book pro

    I have only about 30 gb left on my hard drive. I have a mac book pro I bought in 2013. I've deleted or transferred to an external hard drive
    as much material as possible. How can I find out what is taking up all the room?? My dropbox always says it can't sync because I don't have
    enough room on my hard drive. Why isn't 30gb enough? Please tell me how I can find out which files are taking up so much room and how I can
    find out what I can get rid of (are there programs I don't know about?) thanks
    Isabella

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Get an external hard drive on which to store some of your files after which you can
          erase the data from your internal drive to free up space.
      5. Also see Freeing space on your Mac OS X startup disk.
      6. See Where did my Disk Space go?.
      7. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • Hard Drive / software issues on Mac Book Pro

    I am a new MAC owner! I have splashed out on a 17" Mac Book Pro with standard configuration of 2Gb Ram and 160GB HD. iLife 2006 is on as standard and I have loaded Parallels with MS XP service pack 2, Office 2004 iWorks 2006 and Reunion Family tree software and iTunes with all my music transfered from my old PC which fills about 8GB on my 80GB iPod. Last night I tried to load my back up documents from a portable HD it all started ok then an error message said not enough memory. When I checked the HD there was only 8.14Gb of space left on the HD with the rest being taken up. iTunes seems to have 79GB of space and iPhoto abot 60GB with about 100 photos in.
    Does anyone know where all my HD resources are? Have I inadvertantly given everything over to windows in some strange way? What has happened? HEEELLLP! Please.

    it might be worth reposting over in one of the Mac Book Pro forums. (you're currently posting in iTunes for Windows, and the Mac specialists may not see you here.)
    Mac Book Pro
    a note about your itunes problem on the old PC:
    http://discussions.apple.com/message.jspa?messageID=4446770#4446770
    ... what you're getting there is consistent with itunes being run in an odd "Display Settings" compatibility mode.
    use the following document to find where the compatibility mode controls are kept:
    iTunes for Windows: How to turn off Compatibility Mode
    now below the checkbox discussed in that document, you should see three different checkboxes in a "Display Settings" area. make sure that none of those boxes are checked.
    does that help with the display problem on that PC? (if you've still got it about?)

  • Will a SATA III Hard Drive work on a Mac Pro 2,1 (2008)

    Will a SATA III work on a Mac Pro 2,1 (I think 2008)?
    http://www.amazon.com/gp/product/B004CSIG1G/ref=wms_ohs_product?ie=UTF8&psc=1
    If not the above, then what?

    Apple Pro RAID card is not compatible with 3TB drives and never will be it now seems. It also lacks any real performance and is destined where RAID 5 is a must.
    SSDs are a more interesting matter in choice and support... but not traditional platter type drives.
    I use SSD for system now 100% on multiple systems, 10K WD VR ($200 for 1TB / 180MB/sec and variety of WD blacks and Green.
    2008 has some interesting stuff, PCIe mix and support and booting, but more choices in GPU. Runs best with all 8 DIMM slots filled. Was the first to have UEFI to support 64-bit kernel but does not support industry standard enough to support Windows 8 UEFI.
    Storage market would be a total mess like it was back in 2004 when SATA 1.0 moved to 2.0 and lots of problems. SATA 1.0 in early G5 was just PATA with an SATA interface chip slapped on and not "native" SATA. THAT is where the "will the IBM Hitachi or Seagate or Maxtor" really did require research. Not with Mac Pro line 2006 and on.

  • Hi I was doing a back up on time machine to my samsung 1tb exgernal hard drive and now my mac book pro is not recognising my hard drive???? I am devastated as all my photos are on it. Can anyone please help?

    I have tried wating 15min for it to be pick up.....I have shut down my computer and re booted with no luck.  I am devasted as all my photos are on it.  Any suggestions anyone????

    Was this your first TIme Machine backup or were you running an update to Time Machine?  If the latter then most of your data is probably recoverable from that disk.  If not proceed with this emergency recovery.  I would not erase the Time Machine backup you already have in case there is data on it you can recover, even if it did not complete.  (I don’t know if Time Machine will wok on a partial backup.)
    Before proceeding further you should try to secure your data.  You are close to losing it (or have lost it) and the instructions below will try to make a copy of it without having to boot the operating system.  You will need an external drive which you will erase as part of this procedure.
    Boot the recovery partition:
              • Press the power button and as you hear the bong,
              hold down the Command and R keys.
              Once booted, click on Disk Utility.
    Format (and erase) the destination recovery disk:
              Plug in the drive you are about to erase.
              Select the volume that is NOT your system disk.
              Click on Partition.
              Pull down under Partition Layout to 1 Partition.
              Click on Options…
              Select GUID Partition Table.
              Name: Emergency Backup
              Format: Select Mac OS Extended (journaled)
              Click Apply.
              Click Partition.
    Make a copy of your system disk on the recovery disk:
              Drag and drop the named system disk to Source (often called Macintosh HD):
              Drag an drop Emergency Backup to Destination:
              (Do not reverse these.)
              Click Restore (the lower Restore button).
              Be patient for it to do a full backup of your system disk.
    Save the ailing disk/SSD.  You might be able to recover data on it buy placing it in an external enclosure.  Once the disk is in an external enclosure, if the disk will not spin give it a gentle tap.  I have revived several disks that way.  If it still won’t spin then bother with the recovery software below.
    If it will spin try using DiskWarrior or uFlysoft data recovery.
              http://www.alsoft.com/diskwarrior/
              http://www.uflysoft.com/
    Once your system is healthy again be sure to maintain two reasonably current backups.
    More about backups:
    Time Machine Basics: http://support.apple.com/kb/ht1427
    Most commonly used backup methods:  https://discussions.apple.com/docs/DOC-3045
    Methodology to protect your data.  Backups vs. Archives.  Long-term data protection: https://discussions.apple.com/docs/DOC-6031

  • What's the multi colored pinwheel I get when I work on my mac book pro?

    What's the multi colored pinwheel I get when I work on my mac book pro?

    Zyriab wrote:
    it means the system is busy and you have to wait before it will respond to mouse clicks or key presses by you.
    Sligh correction here. Sometimes it is the system; but sometimes it is just a specific app, while the system will continue to accept user input, and you may switch to a different app.
    The 'official' name is the spinning wait cursor. Go to
    <http://www.thexlab.com/faqs/sbbod.html>
    for a few more details and troubleshooting techniques (if necessary).

  • TS3494 my iTunes has stopped working on my mac book pro 13" when i try oping it it saysThe iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder.

    my iTunes has stopped working on my mac book pro 13" when i try oping it it saysThe iTunes Library file cannot be found or created. The default location for this file is in the “iTunes” folder in the “Music” folder. i dont know what to do i need my itunes back

    Hi pgarard1,
    If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Regards,
    - Brenden

  • HT4543 How do you know if the fan is working on the mac book pro

    How can you tell if your fan is working on your mac book pro?  I cannot hear mine running and can't feel any air coming out. A couple of weeks ago, my battery literally exploded out of the case,  Is this an item that can be self serviced or does it require a trip to the Apple repair store?

    Macbook pro fan usually has really LOW noise, and it is not really strong, so you might not feel the air.
    Fans are used to cool the CPU and GPU, not batteries.
    But if you need to replace fans or batteries, take it to the store. Make reservations to save time.
    Rain

  • Color don't work well in Mac book pro 13"  and monitor flash sometimes? Please help me!

    Color don't work well in Mac book pro 13"  and monitor flash sometimes? Please help me!

    Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
    The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
    The better your description of the problem, the better the chance of a solution.
    For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

  • Will a Firewire 800 hard drive work on my MacBook with Firewire 400?

    Hi, I have a MacBook I bought in 2008. The FireWire specs say " Maximum Speed: Up to 400 Mb/sec"
    I am considering a new external hard drive (the Iomega MiniMax) and want to use Firewire for this one. The specs for the hard drive say: "The MiniMax includes 2 fast FireWire 800 interfaces, a USB 2.0 hub, plus a FireWire 400 to 800 cable."
    Will this FireWire 400 to 800 cable allow me to plug my FireWire 400 laptop port to this FireWire 800 harddrive port? It sounds like it will but I wanted a sanity check before I order it.
    Thanks.

    Yes, that should work just fine.
    Matt

Maybe you are looking for

  • TS1394 Installed iLife11. Now iPhoto wont open. Says to update software. Software update says no new software available.

    Seems to be a catch22 situation. After installing iLife 11 from Install DVD I tried to open iPhoto. Received message that I needed to update to the latest version. Selected Software Update from Apple Menu and received reply that no new software is av

  • Some problems with Contacts app and Apple iCloud CardDAV sync

    Hi all, I've managed to get my iCloud Contacts to sync with Playbook 2.0 Contacts app using the CardDAV account. So far, so good, but I'd like to report many small annoyances which make me feel sad. 1. No clear separation between the accounts. I have

  • Restore mail from af Timemachine backup

    Hello. My server crashed some days ago due to a harddisk failure. I had a Timemachine backup from the server, but you can't restore a server that way, so I installed from fresh. Now I'm missing a lot of mails Is it possible, to restore the mails from

  • SAP WAS SS13 Message driven bean start up problem

    Hello, After we have upgraded our environment from SS9 to SS13 our app doesn't start anymore with the following exception (worked fine before): com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception in operation startApp with

  • AP crashed on exit

    I turned the preference for Photo share on but was not connected tomy referenced images so I exited AP.  Imight of looked at a couple of other projects but Ap wasnt opnen for more than ten minutes.  My parcial crash reportis as follows   Thanks for a