Will a RAM with a 8000 speed work with one(the original)o​f 4700 speed?

Hey guys... I have a Compaq nx6310 that is running slow & I plan to upgrade my memory, but the "suppliers" only have units with higher speeds of 8000 as opposed to the original 4700 - will the addition of the memory of a higher speed work or will I have problems? I need to know this before I go in to purchase - thanks... =]

Hi:
I have attached the link to the quickspecs for your notebook below:
http://h18000.www1.hp.com/products/quickspecs/1243​2_na/12432_na.HTML
This is the memory you need:
Memory
Standard
256-MB, 512-MB, 1024-MB or 2048-MB 533-MHz or 667-MHz* DDR2 SDRAM; two SODIMM slots supporting dual channel memory
Maximum
Intel 945GM Express Chipset supports up to 4096-MB maximum (2048-MB 533- or 667-MHz SODIMM in slots 1 and 2)
Intel 940GML Express Chipset supports up to 2048-MB maximum (1024-MB 533- or 667-MHz SODIMM in slots 1 and 2)
Dual-channel
Maximized dual-channel performance requires SODIMMs of the same size and speed in both memory slots.
* 667-MHz memory is supported at a maximum speed of 533 MHz by the Mobile Intel 940GML Express Chipset.
NOTE: Due to the non-industry standard nature of some third-party memory modules, we recommend HP branded memory to ensure compatibility. If you mix memory speeds, the system will perform at the lower memory speed. Above 3-GB, all memory may not be available due to system resource requirements.
You could also install PC2-6400 (800 MHz) memory, but it will only run at the slower speed.
Paul

Similar Messages

  • HT1270 if i use a kingmax 4gb 1333 DDRIII with one of original rams , performance will be like apple rams ??

    i bought a kingmax 4gb 1333 DDRIII ram , wanna change with one of original rams , i want to know the performance will be like apple rams ????? or does rams have any difference ????

    Wow. Okay...
    I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
    My only comment would be re: your computer specs:
    BJReis wrote:
    .  This may be due to somewhat older equipment:
    GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
    To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
    4GB is right on the edge, IMHO. 16G is ideal.
    I wish you luck, hang in there, and standby for more help.

  • I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • Itunes will not syc with one of my ipods?

    iTunes will not syc with one of my ipods?

    A bit more info for those of you reading this.... the problem seemed to be in iTunes. For each connected device , if I clicked on the Photo option I could no longer select the second radio button for limiting the photos by Events, Albums, etc.  It was an all or nothing deal. But selecting all would cause the error.
    So I had read the other forum posts about the "&" symbol being the cause of the problem.  I went through iPhoto and made all of the changes. It did not work. I then looked at iTunes, using the AlbumData2.xml file listed in the other forums as a reference.  I found one album with the "&". I edited that one.  Still would not work.  So then I spent 3 hours on the phone with AppleCare last week. I talked with 4 different advisors. None of them had heard about the "&" error from the forums. We tried everything in iPhoto including repair and rebuild.  Finally we created a whole new library and reimported my master photos from my original one.  Using this option would allow me to now check off that radio button in iTunes.  BUT... I now lost all of my albums and events and would need to rebuid them.  I was not happy. They agreed and we set up time to talk this week.
    So today I talked with AppleCare again. They now have more info and said the problem has to do with iTunes and the new iPhoto 9.4. It does not like the "&" symbol anywhere in either iPhoto or iTunes. So they now have me going through everything in my iTunes library. Genre is OK but any other item cannot have " & ". I have several dozen to edit and will do it over the weekend and then restore my original iPhoto Library and see if I can finally get it all to sync. I will let you know how I make out, but apparently you need to eliminate " & " from every entry in iTunes and iPhoto.
    Quality control is not up to par with Apple these days. 

  • All my itunes tv shows work except one - the episodes in this series are all light grey so i can't click on them or the icloud icons with the arrow next to each episode. It says that i have purchased them on itunes - what do i do?

    All my itunes tv shows work except one - the episodes in this series are all light grey so i can't click on them or the icloud icons with the arrow next to each episode. It says that i have purchased them on itunes - what do i do?

    Welcome to the Apple Community.
    You can't play music from the computer if there is none there. If you are using iTunes Match you should now be able to download and play all your music on the Apple TV from the music feature on the main page.

  • My iPhone is skipping back to the start of a song every time I unlock it, especially when I am replying to a text message, this is very frustrating and just want to know if it is a simple bug that will be dealt with in the next update?

    My iPhone is skipping back to the start of a song every time I unlock it, especially when I am replying to a text message, this is very frustrating and just want to know if it is a simple bug that will be dealt with in the next update?

    Assuming the phone isn't jailbroken, the basic steps (as needed) are:
    Restart phone (you already did this)
    Reset phone
    Restore phone in iTunes using a backup
    Restore in iTunes as new, without using a backup
    See appendix B of the User Guide for details
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
    If your phone is jailbroken, this is the most frequent cause of the problems you described.  Restoring could permanently brick the phone.
    Note that your iOS is old and the current version is 4.2.8.  It's odd that it wasn't updated when your activated your phone in iTunes, being that you got it last Friday.

  • I just loaded the new version of iTunes on the PC and now iTunes will not sync with either the iPod or iPhone.  Any suggestions

    I just loaded the new version of iTunes on my PC and now iTunes will not sync with either the iPod or iPhone.  Any suggestions

    Hello there, Duane Harris.
    The following Knowledge Base article provides in-depth troubleshooting steps for resolving your issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Help with installing the original Photoshop on a new computer from the disc

    I have a new computer. I want to install Adobe Photoshop Elements 1.0.1. I have the disc and serial number (1057-45428-2285-0248-2785-2727) but when I start installing, I get an error - Internet Explorer 4.0 required. I don't have that program and I want to use Mozilla or Chrome as my internet server. How do I avoid this problem? I am happy with what the original program does and don't want an upgrade. Please reply to [email protected]

    wow that's an old program windows98 days
    so it will be oober slow, GIMP and a few others are free compared to that one
    that said, there are a few things you can try with old software. not sure about yours but goes in general for older stuff
    run it in compatability mode.. This is where you right click on the exe file go to properties and choose the older os to so it can pretend to be it
    another option, as I am not familiar with that older version, it is a little weird why it want ie, maybe it used it to log onto the net, to say hi, not even sure they did it back then, or maybe it used the browser as a webpage to show help, depending on where that code is, perhaps you are running it from the beginning setup of the cd. If you went into the disc itself into the program only part and bypass it. again just a guess
    and the last suggestion, install VMware. this will allow you to install windows98 as a virtual os then you may be able to install it into that.
    after saying all this bear in mind all the hardware you have now, that software has no idea even existed.

  • TS1702 I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?

    I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?

    Well, to paraphrase the old line, "What're you gonna believe, that email or your own lying eyes?"
    The first thing I'd recommend trying is to power down your iPad (press & hold Sleep/Wake until the red OFF slider appears, then slide it to shut down), and then boot it back up and try again. You're resetting a bunch of state signals by doing that and this simple action (the first of a series recommended by Apple in your Users Guide) will quite often clear up these sorts of problems.

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • HT1386 iphone will not sync with itunes the apple sign just keeps popping up

    iphone will not sync with itunes or ture on only with it on a charger but will only keep popping up the apple sign or on acation show iso6 on screen and say sync with conputer but as soon as i take it off yhe charger it wont do anything

    I followed the instructions in those 2 articles. Still not able to see the device in ITunes. I reinstalled the latest iTunes and all updates to my iMac (Mac OSX ver 10.6.8). I tried 3 different USB Cables in different USB ports. Rebooting both the Iphone and IMac. Still nothing seems to be working. I searched the discussion boards and I see other people with the same problem but they seem to run into the same problems finding a solution. I dont understand what happened because this was working properly up until 2 days ago. Do you have any more suggestions?

  • Ipad will only charge with one charger, not recognize by pc or itunes

    I have an Ipad 1. I bought a third party car charger to charge the ipad. I charged it with this charger one time. The next time I tried to charge the ipad with the original 10W wall outlet charger, it would not charge. I bought another apple ipad charger, thinking my original charger had quit working, it still would not charge. I plugged it back into the car charger and discovered that it will only charge on that particular charger. Now itunes nor my windows pc will recognize the ipad. I uninstalled itunes and installed the newest version. I also hard reset the ipad and now I have a worthless ipad that will not connect to itunes. Any suggestions?

    It's possible that charger damaged some part of the connection on the iPad. There's little metal contacts on that small silicon chip sticking out of the port and if something happens to one of those little contacts it can effect how it works.
    You can try taking it into an apple store and have them look at it. If you'd only used 'official' stuff there'd probably be no question but once they know that the damage, potential damage, was caused by a third party device, then it may be up to the discretion of the manager what they do with it. Whether they replace it under warranty or decide that the warranty is void (I honestly don't know how strict they can be with the use of third party devices and how they may/may not work)

  • I have 2TB G-Drive it only will Write to operating system 10.8.3 and NOT the original 10.6 can I write with Both OS Systems....Please Advise

    I have 2TB G-Drive, it will only Write to operating system 10.8.3 (Mountain Lion) and NOT the original 10.6 (Snow Leopard) can I write with Both OS Systems....Please Advise how to

    I think I see where you're going with this: do you mean you're sharing an external drive which shows up on the Mac with Mountain Lion, but not Snow Leopard?
    Possible explanations:
    1) How is it connected? Does the external drive have two USB (or FireWire) connections, and you have a cable going from the drive to each Mac? If so, that's a big no-no. Never daisy chain the same drive to two different computers at the same time. You'd have to use one cable, dismount the drive from the Mac currently using it, then plug it into the other Mac and mount it there. It's a one-at-a-time thing.
    2) You're already doing the above correctly, but when using the Mac with Snow Leopard, when you turn on the drive, it refuses to appear on the desktop. I see this all the time when booting between one OS and the other on my Mac Pro. No idea why, but when Mountain Lion uses the drive, and I then try to use the same drive after booting into Snow Leopard, it won't appear (or only some partitions will appear) on the desktop.
    Simple, though odd solution. Launch Disk Utility. The drive partitions will then mount as they should. You don't even have to do anything in Disk Utility. Just launching it will cause the drives to mount as they should have in the first place.

  • 525G2 will not pair with one of my Bluetooth headsets

    My Voyager Pro+ died last week and now my 525G2 will not pair with a Voyager Pro UC that I had laying around.  It can see it, but when I enter the PIN code it says that it will not pair.  The same headset will pair with my cell phone, so i know it's not the headset that is the problem.

    What is an "expense bluetooth". Does it have a brand name and model number? is it compatible with the iPhone? Have you put it in pairing mode and paired it with the iPhone? Has it ever been paired with another device?

  • My album i purchased a few months ago is not playing all the songs anymore. It will start off with one song playing and then sometimes not even half way it jumps to another song. I havent been on Itunes in awhile to mess with anything on that.

    The album is Maroon 5 new cd. If anyone had problems with that. It is the only album that is not working right.

    Is the Wi-Fi button greyed out?  Try this article: http://support.apple.com/kb/TS1559
    Also, make a backup to iTunes of the device.  Then restore it as a new device.  If you still have wi-fi greyed out, then contact Apple again, and explain that you believe you have a hardware issue.  They may still ask for a $19 deposit, but if it is actually hardware related, then you won't be charged the $19.  Only if it is software related do you get charged that $19.

Maybe you are looking for