Will a Saittek Eclipse usb keyboard work with an Intel Mac Mini?

The Saittek Eclipse is my favorite keyboard.
Anybody know if it will work with an Intel Mac Mini.
Box only says Windows, but I'm just wondering if everything except volume controls will work fine? (it is also illuminated, with a light level control, but I'm guessing this shouldn't matter with Windows vs OS X?)

I am a writer though  and a photographer (strictly point and shoot) for a couple of orgs.  I just don't want o run out of space.  And I hate!! slow response time.  
Is the i5 adequate as well?
Glad to have found an Apple guru so quickly.  May very well buc you more in the future.

Similar Messages

  • Will any of my old displays work with the new Mac Mini

    I am thinking of getting a new Mac Mini.     What I need to know is if any of the monitor/displays I have here can bem used.
    I have two old video monitors I used to used with my old  mac mini (Samsung Symc Master 770 and old little Princeton  - VL158) , a
    n early 2006 iMac 20" (which I don't think I could use as a monitor from what I read) and an little Samsung TV with USB and HDMI connectors.,
    Can I use any of these? 
    Need new connector cords?   Mini-DVI to VGA adapter?
    Thanks

    I am a writer though  and a photographer (strictly point and shoot) for a couple of orgs.  I just don't want o run out of space.  And I hate!! slow response time.  
    Is the i5 adequate as well?
    Glad to have found an Apple guru so quickly.  May very well buc you more in the future.

  • Will my hp Laserjet 1012 printer work with my new Mac Mini (OS 10.7, Lion)?

    I finally have to upgrade from my Mac Mini OS 10.4.11 to a Mac Mini OX 10.7, and wonder if I have to buy all new peripherals, too.
    Here's what I have:
    HP Laserjet 1012 black and white printer
    Proview 17-inch display, PL913s
    Epson Perfection 4490 flatbed scanner. (I scan a lot of manuscript pages and must have a scanner with an adjustable top)
    Wired keyboard with numeric keypad
    Wired mouse
    Yes, I know they're old, but they work fine!
    Thank you!

    Hello Fiona6,
    I use iMac (Snow Lep) and 2011 Mini (Lion) and from both systems my results are:
    Wired keyboard & mouse - work ok, I don't like or use wireless types.
    My LaserJet 1010 - works ok (Your 1012 should also work, same series of printer).
    If your display works ok now, cannot see why it would not work. My mini works with various vga and DVI displays I have at various times attached to it.
    Don't know about your scanner though, with my all in one printer/scanner I have had to use OS X Image Capture program to scan. Might be worth a look at Epson's site to check on any software updates.
    Roy.
    Edit: Regarding display if you are getting a new mini you will need a new display adapter, minidisplayport to vga or dvi, assuming your display is one of these. This can be plugged into the Thunderbolt port on the new Macs.
    Message was edited by: royfromchatteris

  • Which USB external MODEM will work with the latest MAC MINI?

    Can anyone recommend an external USB modem (other than Apple's) that will work with the latest MAC MINI?
    Thanks!
    Captain

    Hello!
    I am very happy with the APPLE USB MODEM "MA034"
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=ap ple%20usb%20modem#overview
    You cannot find smaller and it never crashed or anything whatsoever.
    Oh yes, and it is white!

  • Will my LED 27 Cinema Display work with the new Mac Pro?

    Will my LED 27 Cinema Display work with the new Mac Pro?

    Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

  • Will my 5 year old lg flatron monitor 1730S work with a new mac mini ? thank you.

    Will my 5 year old ( hardly used ) LG flatron monitor 1730S work with a new Mac Mini ? Thank You. Robert.

    You don't say what sort of Inputs it has available, but if VGA, DVI or HDMI then yes, you might need to buy an adapter of some type though ...

  • Will a external Apple iSight work with the latest Mac Mini?

    with a firewire 400-800 if it will what software do i need to take pictures and videos.
    Many Thanks

    Will a external apple isight work with the latest mac mini.
    Yes (if the external iSight works.)
    External iSights are great webcams, but they are getting old (as consumer electronics go) and some have had pretty rough treatment. You can test yours using the suggestions from this page:
      http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
    I suggest you disconnect other Firewire devices until you get your external iSight working with your mini.
    If you do not already have an external iSight and are considering buying one now,
    a new webcam (with warranty) may be a better choice.
    Many available alternatives are listed here: http://www.mac-compatible-web-cam.com/
    THEMACMINIMAN wrote:
    with a firewire 400-800 ...
    Use one of the following ways to connect your FW400 external iSight to a FW800 Mac port:
    • To use the FW400 6pin-6pin cable that comes with iSight, you can use a 6pin-9pin adapter
      like one of these:
      http://tinyurl.com/ydsbb6m  (I use this one.)
      http://tinyurl.com/cgll7o
      http://www.sonnettech.com/product/fw_adapter.html
    • This Firewire 400-800 cable can work:
      http://store.apple.com/us/product/TP320LL/A (I use this one.)
    • Some report that this low-priced alternative cable works:
      http://www.newegg.com/Product/Product.aspx?Item=N82E16812189097
    I suggest you disconnect other Firewire devices until you get external iSight working with your mini. Once iSight works when it is the only FW connected device, you can try connecting other Firewire devices to determine whehter you can use any of them without conflict.
    ... if it will what software do i need to take pictures and videos.
    With your 10.6.3 mini, you can use QuickTime X, iChat, Photo Booth, iMovie, and some of the other apps that are installed with OS X. Your Mac's Help for each of these apps can tell you how to use them with iSight (or other connected cameras.)
    Some more apps you can use are shown in this list:
      http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
    The web links for each app gives details on what functions is offers with your webcam.
    Many Thanks
    You're welcome.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.3)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.3)
    LED Cinema Display  G4 PowerBook  1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Will the Panasonic Lumix DMC-TZ10 work with my Intel Core 2 MBP?

    Will the Panasonic Lumix DMC-TZ10 work with my Intel Core 2 MacBook Pro and/or will I have to upgrade OSX & iLife (£122GBP).  Have seen that AVCHDLite is not directly compatible with Mac, but the articles are mostly 2 yrs old the panasonic website proudly displays the iPhoto and iMovie compatible icons http://panasonic.net/avc/lumix/compact/zs7_tz10/.  Have chosen this as a quality compact camera with wide angle lens, powerful optical zoom & a marine housing.

    AVCHD is not compatible with iPhoto but is with iMovie - not sure about AVCHDLite
    LN

  • Garagekey USB keyboard works with MacBook Pro, but not with 27"  iMac

    Just got a brandnew 27" iMac. The Garagekey USB keyboard doesn't work. It's recognized in systemProfiler, Audio-Midi Setup, GarageBand and Logic. But no Midi is coming in. When I plug it into my MacBook Pro, it works immediately. I know the Garagekey doesn't work with some 3rd party USB hubs, maybe for lack of enough power, but it works always at the internal USB hubs with the MacBook Pro. Why doesn't it with the 27" iMac? I'm cueless...
    The IMac Systemprofiler says: Current Available (mA) 500, Current Required (mA) 300. So I guess, it can't be a power problem?

    Have the same problem with Logic Pro. Works on my old Mac Mini but not on the new iMac 27" i5. Apple told me that it is a difference between the boards they used on the two computers. They said that even if I got a new mac mini I would run into the same problem. they recommended that I upgrade my mini, or try another piece of hardware to connect the two. Looking for hardware now. Good luck to you.

  • Work with after effects, mac mini i5 or i7 ?

    Hi! I'm working with after effects and Cinema 4D, mac mini i5 is better than i7? I don't know if the video card has influence (HD Graphics 3000 de Intel vs adeon HD 6750M de AMD con 512 MB), but the CPU maybe is more important.
    Thanks!
    rompelomo

    As otehrs have said the i5 is probably all the speed you will need, but in the future the i7 may well deliver a bit if an edge. I see no reason not to go directly to 16GB, you could probably get by with 8GB but "get by" is the operative phrase. SSDs have been mentioned, but You should consider the 1.1TB Fusion drive. As a practical matter the overall performance will be VERY close to that of all SSD, but a lot more capacity at a much lower price than SSD.
    Since you are a web developer, I will share my "site development" secret with you. I had a rather ancient Mac mini I was not using. It was old and slow, but could run Mavericks and Server. I have it setup in a closet, running headless (no monitor or keyboard) and controlled from my Mac mini workstation. It is a great place to test new sites without having to go live. I do occasionally catch a problem running on my remote site server that I missed testing on my development Mac mini. Since I already had the old Mac mini my total outlay for my test site turned out to be $30 for the Server app.

  • Will final cut x 10.1 work on a new mac mini?

    Does anyone know if the newst verssion of final cut will work on the newest mac mini?

    Welcome to Apple Support Communities
    Of course. Final Cut Pro X is compatible with the Late 2012 Mac mini and you can download it from the Mac App Store. See > http://www.apple.com/finalcutpro/specs/

  • What 32inch plus tv to buy in the UK to use with new intel Mac mini

    As the title - What 32inch plus tv to buy in the UK to use with 1.83 intel Mac mini. It does not have to have freeview as I will be using tubestick. I do want to use the hdmi connection. Who's got a great setup, with no issues - model numbers appreciated £1200 ish budget

    So everything is working normal except for screen saver? Hmm. That's odd. Perhaps your settings are such that shortly after the screen saver kicks in the mini is also set to go to sleep. That would cause the screen to lose sync and give the "no signal" message. Check your Energy Saver against the Screen Saver settings and adjust the sleep interval if need be.
    FYI, running a screen saver on an LCD TV is not a good idea long term. An LCD uses a lamp as a backlight, and the lamp has a finite lifetime. Consuming it's limited hours of life by running a screen saver all the time (like overnight, everynight) will shorten considerably the service life of your TV.

  • Using External Boot Drive with New Intel Mac Mini

    I have a 1st Gen MacMini and use an external 7200 RPM Lacie drive as the system boot drive along with all the applications.
    If I were to purchase a new Intel Mac Mini, is it possible to use the current external drive as the system drive or is there some conversion steps that would be necessary ?
    Thank you.

    You can use the hardware, but will have to repartition and reinstall the OS from the disk shipped with the new Mac Mini.
    http://docs.info.apple.com/article.html?artnum=303220
    If you create a disk image of the Lacie on your Mini, you can later use setup assistant to restore users and applications from that image.

  • USB Audio output for a intel Mac Mini

    Is there a USB Audio output device I can get for the Intel Mac Mini, that works in both Mac OS X and Windows XP Home?
    I took my Mini apart to put in a hard drive, and now the sound sometimes doesn't work (Internal or External).
    -Locutus

    This?
    http://www.griffintechnology.com/products/imic

  • Will Any Usb DVD-RW drive work with the 2011 Mac mini?

    I am considering buying a USB DVD-RW drive, and i wanted to hear from people with first hand experience of USB dvd drive support for Mac's I'm looking for a DVD-RW DL drive, so It can burn DVD DL CD's normal DVD's RW's etc. Things a modern superdrive would do esentially.
    I have checked and i personaly think the Official apple one will hit my bank too hard, not to mention it doesn't bother me what It looks like
    Can anyone recommend any Drives that work?(It will also be used on My PC and Macbook with a broken superdrive)
    I was looking around the £15-£25 price range
    I was allso wondering if a USB to Sata with a Sata DVD drive will work? As from what i can see nobody has tried it!
    Any help will be appriciated.
    Thanks, Scott.

    This OS X compatible > LG GE24LU20 Reviews works great with my iMac and Mac Mini.
    Boots System Install and OS X Upgrade Disc's, plus burned and boots a Lion Recovery Disc.
    Plus other trick features, like opening and closing from the eject button icon on the menu bar.

Maybe you are looking for

  • ITunes has encountered an error and needs to close XP SP3

    Hello everyone, I know you might have discussed this before, but I could not get the right discussion about it. So yesterday, my windows decided to go from XP SP2 to SP3. Internet Explorer got installed and now everytime I try to open iTunes I get th

  • Can I create a global paragraph/character catalog?

    Is there a way to create a global style catalog in FrameMaker so that, when I modify a character or paragraph style in one document I can save those changes back to the catalog so they are available for my other documents? I know that I can create a

  • Display current and previous months records only

    Hello gang, My selection criteria looks like this: not ({HRDEPBEN.PLAN_CODE} startswith ["C", "EAP", "HMIL", "V", "W"]) and (month({hrdepben.Creation_date}) = month(currentdate)) and {HRDEPBEN.PLAN_TYPE} = "HL" I modified it to this in order to pull

  • Web Link as an underscore which is too long

    A web link in a PDF was updated with Adobe Acrobat 9 Pro.  The new URL is longer than the original.  As a result, the updated web link has an underscore that is too long.  I've tried shortening the underscore with the Link Tool as well as with the To

  • DataPackage1:arrived in BW, Processing 2nd processing step not yet finished

    Hi BI-experts! I would like to load e.g. transaction data from SAP ECC system into SAP BI system. The Loading process is hanging in processing step u201CSERVICE APIu201D. The process  in hanging in status "yellow" and then changed after a while to st