Will a T5240 support Oracle VM Srver for Sparc latest release?

Please let me know because I am about to buy one and don't want to get shortchanged....

Interesting link, I have not seen that page before - I usually use:
Firmware Releases
I did patch the firmware using 147307-09 (7.4.6.c) during my last maintenance window - so I am good there.
have a good day,
GlenG

Similar Messages

  • Oracle VM Server for SPARC support san

    hello all
    Oracle VM Server for SPARC SANdoes not support it?  a server pool does not support the use of san quorum，or storage Repository does not support of ocfs2 file system format？

    Thanks Marcel.  Sorry for the delayed reply as I was away.  Yes, I did mean the control domain, but I also worried that NFS mount on NetApp may not work for LDOMs, as I read somewhere that Solaris does not support containers on NFS.  I am a bit puzzled over here, as this means we may have to go for iSCSI route for all the VMs.  iSCSI is untested in our Solaris environment, although heavily used on other things on NetApps.  We also don't have any options but to use NetApps, as NetApps are being used in our two datacentres and it would be ideal for DR scenario. 
    Regards
    Sujit

  • What all Operating System are Supported on Oracle VM Server for Sparc ?

    hi,
    Does Oracle VM Server for Sparc Support's Solaris OS of different version
    or it also supports linux & windows OS also...
    thnaks in advance....

    The modern SPARC platform ( sun4v ) is locked in Solaris. No chances for open-source OS'es like Linux or *BSD.
    This is because the important hardware documentation is closed ( known only to Sun / Oracle engineers ). For example:
      *  virtualization features of CPU are documented only at hypervisor-call level (part of Sun servers' firmware), and only partially.
      *  CPU errata are closed ( Some errata for old UltraSPARC III were opened during OpenSolaris project, but that's all).
      *  crypto features ( SPU and MAU ) are closed.
    -- Konstantin

  • Oracle VM Server for SPARC MIB for Solaris 11 Not available

    Hi,
    From the 2.1/2.2 Release Notes - The Oracle VM Server for SPARC MIB software is only available on Oracle Solaris 10 systems.
    Anyone know when MIB software will be available on Solaris 11 ?
    Thanks
    Andy

    We're on it (7082776 RFE: Need LDoms MIB support on S11), coming in next release.

  • Oracle VM Server for SPARC - network multipathing architecture question

    This is a general architecture question about how to best setup network multipathing
    I am reading the "Oracle VM Server for SPARC 2.2 Administration Guide" but I can't find what I am looking for.
    From reading the document is appears it is possible to:
    (a) Configure IPMP in the Service Domain (pg. 155)
    - This protects against link level failure but won't protect against the failure of an entire Service LDOM?
    (b) Configure IPMP in the Guest Domain (pg. 154)
    - This will protect against Service LDOM failure but moves the complexity to the Guest Domain
    - This means the there are two (2) VNICs in the guest though?
    In AIX, "Shared Ethernet Adapter (SEA) Failover" it presents a single NIC to the guest but can tolerate failure of a single VIOS (~Service LDOM) as well as link level failure in each VIO Server.
    https://www.ibm.com/developerworks/mydeveloperworks/blogs/aixpert/entry/shared_ethernet_adapter_sea_failover_with_load_balancing198?lang=en
    Is there not a way to do something similar in Oracle VM Server for SPARC that provides the following:
    (1) Two (2) Service Domains
    (2) Network Redundancy within the Service Domain
    (3) Service Domain Redundancy
    (4) Simplify the Guest Domain (ie single virtual NIC) with no IPMP in the Guest
    Virtual Disk Multipathing appears to work as one would expect (at least according the the documentation, pg. 120). I don't need to setup mpxio in the guest. So I'm not sure why I would need to setup IPMP in the guest.
    Edited by: 905243 on Aug 23, 2012 1:27 PM

    Hi,
    there's link-based and probe-based IPMP. We use link-based IPMP (in the primary domain and in the guest LDOMs).
    For the guest LDOMs you have to set the phys-state linkprop on the vnets if you want to use link-based IPMP:
    ldm set-vnet linkprop=phys-state vnetX ldom-name
    If you want to use IPMP with vsw interfaces in the primary domain, you have to set the phys-state linkprop in the vswitch:
    ldm set-vswitch linkprop=phys-state net-dev=<phys_iface_e.g._igb0> <vswitch-name>
    Bye,
    Alexander.

  • Oracle VM Server for SPARC 2.2 Released

    We are pleased to announce the availability of Oracle VM Server for SPARC 2.2 release. See the announcement at Oracle's Virtualization Blog - https://blogs.oracle.com/virtualization/entry/announcing_oracle_vm_server_for1 .
    Please review the Oracle VM Server for SPARC 2.2 Documentation http://docs.oracle.com/cd/E35434_01/index.html for specific details of required and minimum software and supported platforms. Visit the download page http://www.oracle.com/technetwork/server-storage/vm/downloads/index.html for instructions to download the required software.
    Edited by: Honglin Su on May 24, 2012 10:22 AM

    S11 networking has "vanity naming" enabled by default (so things are named net0, net1, etc) - if you run 'dladm show-phys' you should be able to work out which one is from the vsw device.
    Note: unlike on S10, with S11 you don't need to plumb the vsw in order to get connectivity between the guests and the control domain.
    This might also help: https://blogs.oracle.com/raghuram/entry/ldoms_networking_in_solaris_11

  • Oracle VM Server for Sparc

    I am going ahead with the Oracle VM server for Sparc in the next 6 weeks.  Just one question I want to be sure of - do I put the OS of the base machine in the NetApp and NFS mount it or the base machine OS on local disk  and all the LDOMs OS on NFS mounted on NetApp.  I want to create a pool of two machines one with  2 T5-2  servers in it and another 4 T5-220 servers in it.  My intention is to move LDOMS from one machine to the other within a pool, depending on the load.

    Thanks Marcel.  Sorry for the delayed reply as I was away.  Yes, I did mean the control domain, but I also worried that NFS mount on NetApp may not work for LDOMs, as I read somewhere that Solaris does not support containers on NFS.  I am a bit puzzled over here, as this means we may have to go for iSCSI route for all the VMs.  iSCSI is untested in our Solaris environment, although heavily used on other things on NetApps.  We also don't have any options but to use NetApps, as NetApps are being used in our two datacentres and it would be ideal for DR scenario. 
    Regards
    Sujit

  • Oracle VM software for SPARC T4-4 server

    Hi All,
    I am looking for oracle vm software download for SPARC t4-4 sever.
    I searced and found below reply....
    Download Oracle VM Server for SPARC 2.2 software from My Oracle Support, search patch ID 14054041 (for Solaris 10);
    Is this the right or latest software ( oracle VM) ??
    if not can you please let me know where I can download oracle vm software for SPARC t4-4 server.
    I am on solaris 10.
    Thanks.

    Yes, that is the latest version available.

  • Where is the Oracle VM Server for SPARC 3.2 SW download?

    Where is the Oracle VM Server for SPARC 3.2 SW download?
    Tips leading to a successful download of the correct SW may be rewarded with German beer.

    Many thanks for your answer.
    Can you point me toward something, which I can show our customer indicating when 3.2 will be GA for Solaris 10?

  • Oracle VM Server for SPARC 2.1 - cannot config vsw0 in Solaris 11

    Any tips for getting it to work with Solaris 11? I tried following the steps outlined in Administering Oracle VM Server for SPARC 2.1, but it fails on the "ifconfig vsw0 plumb" command with:
    ifconfig: cannot plumb vsw0: Object not found

    S11 networking has "vanity naming" enabled by default (so things are named net0, net1, etc) - if you run 'dladm show-phys' you should be able to work out which one is from the vsw device.
    Note: unlike on S10, with S11 you don't need to plumb the vsw in order to get connectivity between the guests and the control domain.
    This might also help: https://blogs.oracle.com/raghuram/entry/ldoms_networking_in_solaris_11

  • Oracle VM Server for SPARC Management Platforms

    Upon doing some nominal research, I see that the Oracle VM for x86 platform is significantly more robust (at least at first glance) with regards to migrations/interface/etc. Where is the equivalent of Oracle VM Manager for SPARC? Is the Oracle Enterprise Manager with Virtualization Managment pack the tool that most people are using? Our virtualization offering, centers around the market share leader with regards to x86, at least at current. We would like to boost our product line with a similar service built on SPARC but it seems as if the product is too young to do that? I'm hoping that I'm wrong and just haven't found the right documentation. I'm also trying to get an appointment set up with the sales team to discuss.

    It's true there does seem to be a wide gap in the UI aspect of Oracle VM for SPARC vs. Oracle VM x86. Personally I like the UI for the x86 platform better than the OEM 11g with Ops Center plugin for LDoms. However, I believe both UIs lack some robustness. In our case, we currently do not use a UI (for many reasons, mainly bugs and lack of certain CLI functionality). In the SPARC arena, it is extremely simple to script everything for the Oracle VM SPARC product (including HA scenarios). Once we build out the infrastructure, almost everything we do (provisioning, reporting, decommissioning) is done via simple perl scripting which is the power of not having a UI. However, a better UI for Oracle VM for SPARC is desirable for managing multiple environments/groupings, etc..

  • Will Apple ever support Adobe Flash Player for iPad ?

    How many iPad users have tried to access manuals for consumer products they have and are unable to obtain because of this issue ?

    It's unlikely that Flash will ever be supported on the iPad.
    Flash is a proprietary product and is being replaced by a standards-based solution, HTML5.
    By the way, I've never seen a user manual that needed Flash. These documents are almost always PDF files which are supported by the iPad.
    Note Flash questions are very frequent posts here and usually you can find Flash answers by using the Forum search feature rather than posting new, redundant, questions.

  • Looking to download Oracle Ent Mgr for SPARC 64 10g

    I am looking to download Oracle Enterprise Manager 10g for SPARC 64 bit. When on the OEM download page I only see it available for 32 bit SPARC. Where would I download this from OTN?

    Here is some inforation from Metalink of the cerification. So it is certified, plus it will outline exactly what I am looking to download.
    Certify - Additional Info Oracle Enterprise Manager 10g Grid Control Version
    10.1.0.3 On Solaris Operating System
    (SPARC)
    Operating System: Solaris Operating System (SPARC) Version 9
    Oracle Enterprise Manager 10g Grid Control Version 10.1.0.3
    Oracle Database - Enterprise Edition V9 Version 9.2 64-bit
    Status: Certified
    Product Version Note:
    None available for this product.
    Certification Note:
    9.2.0.4 required

  • Will aperture 3 support Fuji XF-1 for RAW

    Appple
    will Aperture 3 add support for Fuhi-XF-1 camera soon ???

    We don't know, sorry. This is a user to user forum, and the Apple Support Communities Terms of Use forbid speculation.
    Check the raw support page occasionally, (Apple - Aperture - Technical Specifications - RAW Support )and send fedback to Apple, that you are waiting for raw support  Apple - Aperture - Feedback
    Regards
    Léonie

  • When will AT&T support OS v4.5 for 8800 devices?

    Anyone have any news on this?  As far as I can figure out, AT&T only supports v4.2 for 8800 devices.  At least, Blackberry.com lists my 8820 as unsupported for v4.5, and at&t only offers the v4.2.
    I'm looking at A&T downloads here:
    https://www.blackberry.com/Downloads/entry.do?code=577BCC914F9E55D5E4E4F82F9F00E7D4
    and I checked to see if my device was supported here:
    https://www.blackberry.com/hhupgrade/
    thanks!
    Solved!
    Go to Solution.

    Yes it will work. OS 4.5 has been out for the 8800 model from other carriers for a few months. Read the thread I sent you to, the first post explains it all, the directions, etc. Removing ONE file from the PC after the OS installation to the PC is they key.
    ATT doesn't care. If you every need warranty support (until they don't release OS 4.5, all you need to do is downgrade the device back OS 4.2.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Time Machine to back up an external HD.

    My iTunes library is on an external hard drive. I would like Time Machine to include it in its backups. Can this be done? If not, is there other backup software I should consider? -Ron.

  • XPath result while evaluating with XPathConstants.BOOLEAN

    I am trying to get the value of a boolean attribute but I am getting the wrong result when I try using XPathConstants.BOOLEAN. When I use XPathConstants.STRING I do get the correct value. The following code: public static void main(String[] args) thr

  • Bypassing the replace prompt when replacing a file that already exits

    I want to bypass the "replace prompt" when replacing the file I know already exits.  In the program when I ask it to replace 1 file I know it needs to replace several other different files.  I just want one original promt to replace the file and all

  • Nokia 7020 MMS Configuration

    Does anyone know the MMS configuration for Nokia 7020 on the ATT system?  I cannot picture text at the moment. 

  • Q10 - New synchronizing Link Software does not synchronize

    Well, we finally have the "synchronizing update" to Link. This is greeted with a warme welcome and many happy faces, not doubt. However: - after following the instructions, the sync runs, claim to be completed, but the agendas have not swapped appoin