Will a VGA silencer fit?

K8N
+
ATI Radeon 9800 Pro
+
Zalman CNPS7000A-AlCu
+
Vantec Iceberq CCB-A1C
+
Arctic Cooling VGA Silencer
=
Compatible?

I'm really sorry but the Vantec Iceberg and the Silencer DON'T go together.
There is about 1.5mm !!! gap between the MSI chipset cooler and the "head" of the Silencer where the fan is situated.
I couldn't even put the smallers of fans between these 2.And i mean the smallest..You might even say i was lucky the Silencer fits!!!
I have a 9800 Pro so i should know.
And to all those who say it fits, either you don't know and are guessing, or i challenge you to post a PIC with one installed.
And if that doesn't convince you, i will be forced to post a pic myself so you can show me your MAGIC.
And all that jus to keep poor folks from buyiing stuff they can't use, just from misinformation.

Similar Messages

Arctic Cooling VGA Silencer + Zalman CNPS7000 = Fit?

I'm thinking about getting an Arctic Cooling VGA Silencer for my Hercules 9800 Pro, but I was wondering if the back piece really fits between the AGP card and the Zalman CNPS7000. Right now my gfx has the special stock cooling on, a.k.a Hercules-style with copper RAM-sinks and a copper heatsink for both the front and the back (back of the card, that is) of the GPU. It's a pretty tight fit to get my SATA cable through them.
Will it fit?
I'm also wondering if the VGA Silencer fits on my card? It does have non-stock cooling, but it's the same layout if you remove the heatsink and RAMsinks.

How about the Zalman ZMHPOPH80blablabla thing. Does it fit? It'd be nice to have to zalman coolers

Vga silencer (ati) fit on msi neo2 939

I am concerned about the clearance between the northbridge fan and my vga silencer (ati ver.1) used currently on my ati 9800pro. I have ordered the msi neo2 and think that it will barely fit but wondered if anyone else have noticed this.
Thank you
Kim

I had a little problem installing mine. It took me a couple of minutes to figure out what was going on. The H/L switch on the VGA Silenser was hitting one of the capasitors on the mobo and I couldn't push the card all the way in. I had to unbolt and reposition the switch. And like the others said there's not much room between the NB fan and the card, but it does fit. I think it would be chalanging trying to get to the AGP slot clip with that tight fit. Good luck!

Thermaltake crystal orb on K8N Neo chipset w/ VGA Silencer

hi!
does anyone have a thermaltake crystal orb (http://www.thermaltake.com/coolers/chipset/a1178.htm) on the nforce 3 250gb chipset and a radeon with a Arctic VGA Silencer on it - does the orb fit ?
I have one of these in another system i am thinking of using it to cool the nf3 chipset- the only problem being the fan on the VGA silencer comes pretty close to my current southbridge nf2 board -and by the looks of things its not in a very different location on the K8N Neo board.
thanks!

Quote
Originally posted by ninjastyle
Am I right in thinking that the Vantec can't be installed without removing the K8N from the case? I'm guessing that it's just a matter of unscrewing the old NB heatsink and replacing it with the Vantec. This looks like a good unit though, I might grab one of these. How about using a little Arctic Silver 5 on it too?
Yes, you will need to get at the back of the MB to remove the MSI NB heatsink. AS5 is always good for what ails!

VGA Silencer AT 3

I'm dissapointed to say that the $40 VGA Silencer AT 3 does not fit on my MSI RX9800 Pro 128 MB. I had really high hopes of using it. The first thing I noticed when I received the package was the fact that it had a 3 pin connector instead of a two pin. I was overjoyed of the fact that I did not have to spend 30 minutes cutting off the plug. Then i removed my VGA Silencer Rev 3 to find out that the new one does not fit because there is an obejct in the way on the upper left corner.

Try this instead.
http://www.overclockers.co.uk/acatalog/Online_Catalogue_Other_Coolers_57.html
theres one specifically engineered for the X800, the rev 4 ati 4.
didnt realise they did so many models of it myself.

Will the Volcano 7+ fit?

Will the Volcano 7+ fit in the mobo in my sig??
I dont want to come home and find out that it wont fit in the socket
Thats how the volcano 6CU fits atm...
and it is: 80x60x65 mm
Im not sure of the dimensions of the 7+..
But since the fan is parralel with the heatsink and its ( the fans ) dimensions are 70*70
It *should* fit...
Does anyone know for sure?
Thanks for the help

Me too,
It is a little sketchy during installation, I would recommend a shim for sure. The fan housing is just a little too big and getting the clip to catch the front hooks can be a bit of a challenge...you'll see. Just be careful.
Oh that pic in your post is way too big....really 8)

Will my iPad 1 fit in an iPad 2 case?

I just purchased an iPad 1, but all of the leather, foldable cases that I am attracted to are made for iPad 2. Will my iPad 1 fit in these?

The first gen iPad is slightly larger in all three dimensions, so the chances are that it won't fit - or if it does it might be a tight fit. If possible I'd try it first before buying

Will an iPad case fit the new iPad Air 2

Will an iPad case fit the new iPad Air 2? I found a charging case for an iPad but it doesn't specifically say for iPad Air 2.

No, it will be too large.

Will any sim card fit an iPhone 3 g

Will any sim card fit in an iPhone 3G?

when I swapped sims the numbers on theism wouldn't come up on the iPhone?
I have this strange gift of being able to read " odd postings "
When did the subject ever reflect the actual issue ............................

Will my GFX Card Fit???

Hello,
I have a quick and easy question. Will my graphics card fit on the K8N Neo Platinum?? The card is a Leadtek FX5900 LX its the big one!
Im worried about the chipset fan being in the way.
Any thoughts?
Alastair

Quote
Originally posted by syar2003
The Neo2 has another sink incl. fan and will not reach the hight of a passive sink + chipsetfan on top of it so i guess it will be okay .
Sorry i did mean the neo 2 nforce 3 plat, What do you mean by this?

Will Zalman CNPS7000A-Cu fit on 865 Platinum?

Hi, let me to the point: will Will Zalman CNPS7000A-Cu fit on my board?
Have anyone tried this?
Thanks.

UnderTheSun,
it's really fit? Poor performance? But many site praise it. They said this HSF have good performance and silent, that what make me interested.
=LKS= KA DRUMA,
Swiftech is hard to find in Indonesia. So even I found it, it'll be pricey I think.
Dcasole,
yeah, that SP-94 really nice, but I seek the easy way to install.
It needs me to took off mobo and removing fin (like you said).
So, it won't fit? Good/bad performance? Fiuhh, there's no so many HSF choices in my country.

Will a Zalman VF700-CU VGA cooler fit?

Hi there, my 2nd post now, I'm on fire!
Anyway, I've recently installed a GeForce 6600GT card in my 865, and it's working great! But I find the stock VGA-cooling a bit noisy, so I was thinking of changing it.
The Zalman VF700-CU is a great cooler, but a bit on the large side. It's 30 mm high according to Zalman, so it's gonna be a tight fit.
Anyway, do you think it will fit? Anyone who knows? Don't mind the PCI slot going to waste, wasn't going to use it anyways!
Here's a pic of the space...
edit. Here's more info on the card: INFO

Thanks for the replies.
Anyway, I switched card to an even larger (and more powerful) 6800GT, since the zalman cooler wouldn't fit the 6600GT so good.
So now I've got a nice 6800GT clocked @ Ultra 256 MB instead, for those nice new games!
It's pretty amazing what how much the PSU can handle. It sure is one hell of a quality-PSU!
Here's some pics of the layout, very cramped indeed! What do you think about the butt-ugly ventilation-holes I drilled? They sure aren't pretty, but they work excellent!

Will this VGA to DVI adapter work on Mac Mini 2006

This is a simple question which ssomeone should be able to answet
will this DVI to VGA adapter work on a Mac Mini 2006
http://www.amazon.com/gp/aw/d/B000067SOH/ref=mp_s_a_1_3?qid=1419898227&sr=8-3&dp Pl=1&dpID=41daTmtKEEL&ref=plSrch&pi=AC_SY200_QL40

Yes it will.

How much "power" will my VGA out give me?

I was just wondering, how much power the graphics card is on my iBook G3. I have used the TV out through the headphone jack, and it works ok, but very low quality. I see there is a mini-VGA out. For $20 - I can get an adapter that turns that port into a regular VGA plug that I can use with any other monitor.
This Black Friday, there is a place selling a 22" LCD monitor for only $139.99 which is super cheap - and I was wondering if it would work with my iBook. What I am concerned about is - this monitor had a native resolution of 1680 x 1050, and my iBook monitor is 1024 x 768. So, when I plug in this monitor, will that option become available, or will I be stuck with a 22" monitor with a stretched 1024 x 768 picture? If that is the case, then it's not worth it.
But I was just wondering what the max resolution was of the VGA out on these old iBooks.
Thanks!
Scott

I don't know about the Pro models. You may want to ask in their forums if you're considering buying one of them.
As a matter of fact, I'm not 100% certain about the MacBook since I've never actually tried connecting an external display and I don't often post or read topics in the MacBook forums. However, the question has come up many times here about the iBook G3 (Dual USB) (where I have been posting for over 5 years), and I'm sure that its resolution is fixed at the maximum of the built-in display. I based my comment about the MacBook on the assumption that since the MacBook is the iBook's replacement, there is a similar limitation. Pro models have several capabilities lacking on the consumer models, and I really don't know about the resolutions they may support.

Will iPad 2 covers fit the new i pad?

I have ordered my new iPad and already I am looking at accessories to keep it safe from the enviroment/elements. All I can find at the moment is iPad 2 accessories.
Will they suit the new iPad, or is there new covers etc out there?

If you're talking about the iPad 2 smart cover (made by Apple), yes, it most likely will.
If you're talking about iPad 2 covers, no.
That's because the New iPad is thicker and covers are tightly fitted to the device. You'll have no allowance space to fit your New iPad onto an iPad 2 cover.
Screen protectors on the other hand should work for both the iPad 2 and New iPad, in case you need to know.
A smart cover is simply just a screen cover made of polyurethane or leather with a built in magnetic strip and the cover latches to you iPad easily, it doesn't cover the aluminium back of the iPad though. It is not built to shield your iPad from shock.

Will a VGA silencer fit?

Similar Messages

Maybe you are looking for