Will a video play after being converted to a Powerpoint?

I want to add some videos made in Final Cut Pro to a Keynote presentation. The presentation might ultimately be played on a PC through Powerpoint. Will an embedded QT video play in a Powerpoint made originally in a Keynote?
Thanks.

Turned on after holding all three buttons for half a minute.  But I'm not convinced this is the end of its troubles.  Definitely getting a Samsung after this- I've never had a problem with any of THEIR electronics, and they're not going anywhere.  The big worry for me is I'll need to send my Z10 in and they'll no longer exist to fix it.

Similar Messages

  • HT1351 Why won't movie files from flip camera won't play on ipod even after being converted?

    Why won't movie files from flip camera won't play on ipod even after being converted?

    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object?

    When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.

    Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
    John Wang
    801-3618742
    [email protected] 
    http://johnwanggallery.shutterfly.com  

  • How do I make one video plays after the other

    Let's say I have an idvd project with 5 different movies, how do I make one plays after the other? When I click next, it goes back to the menu. Thanks Alex

    There are two ways to do this.
    1. If you have it, use iMovie HD6. You can put all of your movies into one project, and add chapter markers at the beginning of each movie. This will allow you to play your movies straight through or select the individual movies, like a scene selection.
    2. You can use iDVD instead. Check out this post by Old Toad on how to use this method.
    http://discussions.apple.com/thread.jspa?messageID=8656075&#8656075
    I hope this helps.

  • Lots of my music will no longer play after latest update

    Hello,
    I have a lot of music that will no longer play in my iTunes after the last update.  it doesnt happen with all my music, but a lot of it, and as far as i can tell, movies and tv shows are still good.  when i click on the song, it just skips forward over a lot of songs that it cant play until it gets to the next one that it can play.  to make things stranger, i synced my iPad to my iTunes, and the ones that cant play in my iTunes will play on my iPad.  when i try to open the song using QuickTime player, i get the following error: error -2002 a bad public movie atom was found in the movie
    what is a bad movie atom and why am i getting the error when trying to play an audio file, and why wont they play in my iTunes but will on my iPad.
    System: Win7 Ultimate 64bit AMD A10 8GB RAM
    iTunes : 11.4.0.18
    QuickTime : 7.7.5
    any ideas?
    thanks

    The contacts is saved on Google or Backup Assistance (Whichever you are using) and you can use ES File Explorer like I posted at http://community.vzw.com/t5/Android-Apps/Simple-way-to-Backup-apps-for-Hard-Reset/td-p/658707 , so you really wont loose anything but apps data...
    BUT, I am not saying that you do this if that is your only issue...  I was just pointing out that this is a good ideal to do with any Major Updates..
    If the contacts isnt linked again you should get the option to link them again once the OS boots, normally it checks and then prompt to link again..

  • Will Avchd video play on a non avchd dvd player?

    I was thinking of buying an avchd camera (canon hfs one records to sdhc flash memory cards), but I am hesitant because of all of the questions surrounding it. If I record avchd, edit in Final Cut Express, and then put in iDVD and then burn on a regular dvd, can the video play in any dvd player? Is there any way to do this?

    There may be some issues during the editing process, but if you can get the video burned to a standard video DVD (ie, not a data DVD), it doesn't matter what the original file format was. Regular DVDs must all meet the DVD standard, which means your video has to be converted to mpeg-2 format during the encoding/burning process.
    John

  • Swf files are not playing after being published

    i am trying to run the 'connector' example that comes bundled with smartfoxserver2x downloads..there it connects to the server and loads the correct configuration file. when i run it in adobe flash professional 5,it runs correctly and connects to the server but after being published as SWF movie,it doesnt work.it loads the configuration file but cant connect and gives error connection failure..ERROR 2048
    this is the example i am talking about. http://docs2x.smartfoxserver.com/ExamplesFlash/connector
    flash

    that's probably a local security restriction you have.  reset it to allow your swf to communicate across your local sandbox to the internet:  http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
    or test online.
    in the future, please copy and paste complete error messages.

  • Mov files will no longer play -how to convert them to a playable format?

    Okay, I read Steve Job's "Thoughts on Flash". Fine I get it.
    So how do I convert an older Quicktime, flashbased mov file to something playable?
    I have a mov file I need for an assignment for school and I been trying for a month to convert it to something that I can listen to. (It's a quicktime mov file but it only has audio.)
    I've been trying to convert it on a PC since most of the programs I read about for file conversions were PC only programs. Six tries no solutions. (See my posts and requests for help in the PC Quicktime area of Apple discussions.) All give error messages and say they cannot convert the file.
    So... are there any format conversion programs (free) for Mac that will convert this file to something playable? I have the ibook G4 with 10.3.9 I can try on. (The G4 tower just died - power supply is toast)
    I am so frustrated and running out of time. Thanks for any ideas or help.

    So let me see if I understand this.
    I would attach an external hard drive to the computer via usb.
    I would put a copy of the OS 10.3.9 on the external hard drive with an install of Quicktime 7.2 (still flash capable)
    Then use a sound recording program to record to a different format.
    I didn't know you could successfully have a second OS on an external drive without problems. Anything in particular to be careful of, or to do or not to do? Do I have to start up the laptop with the external drive disconnected and then connect it after start up?
    These won't fight with the current OS on the laptop? or the current Quicktime install on the laptop?
    Question: can I remove the hard drive from the just expired G4PowerPC and put it in a case and attach it by usb to the laptop? I'm pretty sure it's Quicktime version is 7.2 and I have a paid for copy of sound studio on that hard drive. The G4 hard drive is used to being the master drive vs the slave. Do I have to move the jumpers or is there something else I have to do? It's got OS10.3.9 and OS9 on it.
    I don't know if my mov file has any enabled clicks or not. How would I know or find this out? What would this look like or how would it behave?
    Thanks for the idea.
    Message was edited by: Christine Bell

  • IPod loses "Last Played" after being connected to another computer

    I've done a lot of searching on this, but it's a hard thing to search for since it's difficult to explain. Hopefully someone has heard of this before. If it's already been posted somewhere, I apologize.
    Basically, I sync my iPod classic 80gb with my work computer. I use a lot of smart playlists to manage what I listen to. "Last Played" is an integral part of my smart playlist system.
    If I connect my iPod to any computer other than my work computer, the iPod will forget any of the songs I listened to since the last time I synced. I would like to be able to use the iPod as a portable hard drive, but when I do I lose this information. I just tested this to be sure, but when this happens, I don't lose any ratings that I've given to songs since my last sync. So far I've only noticed "Last Played" being dropped.
    Any information would be a huge help. Thanks!

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • 1st generation ipod touch will not turn on after being charged

    1st generation ipod touch got a white screen and then after that when charged it will not turn on. Does anybody know what happened or how I can fix it.

    That symptom is one of those covered here:
    iPod touch: Hardware troubleshooting

  • ITUNES MUSIC NOT PLAYING AFTER BEING MOVED TO EXTERNAL HARD DRIVE

    I moved my itunes library to an external hard drive a long time ago no problem. Now i bought a 1TB to transfer it because i was running out of space on the other one so i transfer the folder itunes music everything went okay.But now when i turn off the other hard drive to make sure my music came to this new hard drive and play it doesn't. Unless i go one by one and find the file in the new hard drive it won't play. So what can i do? I just move the itunes music folder everything else is where it was. I followed all directions i found on the internet they all say just moved the music folder which i did. So where did i go wrong? Any help is greatly appreciated!!

    It depends on what you want. If you want everything to be on the external drive, and all of your music is in the iTunes folder now, then you can just drag the entire iTunes folder (the entire folder, not just the iTunes Music folder) to your desired location. Then hold down the Option key while launching iTunes. You'll be given a dialog box where you can select the iTunes library you want to use. Navigate to and select the iTunes folder in it's new location. Everything - playlists, ratings, etc. - should remain intact and all future purchases and imports should go to the new location on the external drive. Once you're certain that everything is working as it should from the external drive, you can then delete the iTunes folder from your internal drive.
    Caution, though: once you do this, make sure the external drive is connected and mounted before launching iTunes. If the drive isn't mounted, iTunes will automatically switch back to using the default location on your internal hard drive and will of course show a blank library. This won't be a problem, though; just quit iTunes and relaunch using the Option key and select the folder on the external drive once again.

  • IPod suddenly starts playing after being inactive for some time

    After using my iPod I press the play/pause button and keep it pressed for some seconds to turn the iPod off.
    Some hours later -I don't know exactly how long since this usually occurs overnight- the iPod starts playing music!!!
    Am I missing something when turning the iPod off?
    Does someone have the same problem?
    If so, have you been able to fix it?

    Is this happening all the time? because i sort of had the same problem..for some unknown reason to me, my iPod kept turning on every morning, and i couldn't find out why. Then i realised i had set the alarm thing on my iPod to 9am every morning, months ago! it could be your alarm setting, otherwise i have no idea! hope i helped!

  • Sound from video plays after video player removed from stage

    I have a website http://www.droolpigs.com when I go there if I click the video archives button then play a video  then click on the home or photos button or one of the alternate  background buttons on the left the video goes away as it should but not  always the audio (especially when I click while the video is still  buffering).  Is there a command I can use to kill the sound from the  flvPlayback component and nothing else(I have a mp3 player there also I  so I don't want to use the SoundMatrix class.
    btw the videos are all played on an instance of the flvPlayback component.

    That didn't work.  I found this posting where someone claimed to access the netstream object in flvPlayback
    video1.addEventListener(VideoEvent.STATE_CHANGE, onVideoStateChange);
            private function onVideoStateChange(evt:VideoEvent)
                ns = evt.target.getVideoPlayer(evt.vp).netStream;
                video1.removeEventListener(VideoEvent.STATE_CHANGE, onVideoStateChange);
                setNetstreamObject();        
    I attempted to instantiate ns this way var ns:NetStream = new NetStream(); but the compiler was expecting a argument.
    I'm about ready to ditch flvPlayback and try my luck with the NetStream class.

  • HP Pavilion a1123c - will not power on after being unplugged while in use

    So bit of panic:
    I've been using the above computer since 2007 with the expected wear and tear, slowing down. Today it was put through its paces and while on a multimedia-hwavy web page it became unresponsive to the point I could not even bring up the task manager to restart. Being a computer noob, I unplugged the computer to force a reset. It now will not power on with or without the power source. While plugged in the LED flashes rapidly. When unplugged the LED flashes but more slowly. I have tried flipping the voltage switch on the back but still my computer won't turn on.
    I have all of my digital photos on this computer and am terrified of losing everything. What should I do? Is there hope of the data being salvageable? Thank you all so much.

    Assuming erico 's advice fixes the situation, please make backups of the important data -  such as photos or other important documents to a DVD or flash drive or external hard drive.
    If the power supply troubleshooting guide does not fix the problem, there are ways to still make the backups of that important data, on a working computer from the failed computer.  Just come back with the report on whether the advice from erico worked or not.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Why won't my embedded videos play after I reopen powerpoint after saving

    I have just bought a new MacbookAir(Tuesday)
    I do a lot of powerpoint presentations for work and have now compiled one on my Macbook.
    However when I embed the videos into the presentation they are fine while the presentation is ongoing.
    As soon as I shut it or save it, once I reopen it, it does not play the videos at all. The screenshot is there but no videos.
    The videos are MP4 format downloaded from YouTube.
    The same format and videos worked with my old PC
    So just wondered if anyone knows what I am doing wrong?
    Many thanks

    Use the Apple ID support -> http://www.apple.com/support/appleid/ - click through the contact information and select the iTunes, etc., hot button. You can have Apple call you or email them.
    Clinton

Maybe you are looking for