Will adding global access change my domestic plan?

Will adding global access to my phone now change my domestic calling plan and if so should I wait until I'm out of the country to change it?

twodogsfourfish
I completely understand how important it is to be clear about any changes to your plan and coverage before completing changes! I can definitely go over the details with you. With being on the Nationwide plan currently, what global access were you looking to add to your plan? If the $25/100MB data plan for global data access, this will only add the $25 charge itself. If the $4.99 Voice Value plan to lower per minute rates outside the country, again it will only add the $4.99 charge itself and will not change your domestic plan. Were you looking to move to a More Everything Canada/Mexico plan instead? This would change your calling plan depending on when it was made effective.
As with any international trip, I definitely recommend reviewing our trip planner to make sure you're clear on all rates and dialing instructions before you go! The $25 and $4.99 features are not compatible in all countries. http://vz.to/1fb1kE8
RuthW_VZW
Follow us on twitter @VZWSupport

Similar Messages

While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

Hi, While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". Pls advice us that what is this error and how to resolve this. And Which log is to be referred for the details. Thanks Ravi

If a form is invalid it generally means that one of the dimension references is missing. Can you get in to edit the form? If you can, see if you can preview it. I suspect you will not be able to. If not, check all dimension boxes have at least one member against them. If you have multiple rows and/or columns check all of them too. I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it. Hope this helps.

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad. How can I found out if I will be able to access all the functionality in Alice? Will I need to purchase a local plan of some sort?

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad to use while traveling back and forth from the U.S. to Australia, and within Australia. How can I found out if I will be able to access all the functionality of the iPad in Alice? Will I need to purchase a local plan of some sort? I have never owned an Apple product before -- I'm a newby!

Aside form the limitation of LTE to the 700MHz and 2.1GHz bands (which rules out LTE in Europe I gather, at least as it stands now) the new iPad should let you use a GSM 3g/2g/edge network anywhere. The CDMA Verizon model will only be able to use it's native CDMA radio band in the USA (that radio will be locked to Verizon), but it's international GSM radio is the same as the AT&T model.
Keep in mind though that by far the cheapest option when abroad is to take advantage of free wifi as much as possible (well, that is always the cheapest option, since it is free). I know several people who have taken their wifi-only iPads and iPad2s to Europe and said they did not find the lack of 3G really inconvenient at all as most towns had plenty of free or cheap wifi access all over the place.
And in 3 years, your iPad will be at least 2-3 generations behind, LTE will have already been replaced by 5G or whatever the next new generation of cellular ends up being named (and the "young" kids will be wondering what the heck 3G even means or meant - dang that stuff was from the olden days!), and you can pitch that ancient piece of technology and start things all over again

Group by change the sql plan by adding "filter"

The table is created by:
SQL> create table t1 as select 1 a,rownum b, rownum c from dual connect by rownum<10000;
Table created.
SQL> create index t1_idx on t1 (a,b);
Index created.
SQL> exec dbms_stats.gather_table_stats(null,'T1',cascade=>true,estimate_percent=>1,no_invalidate=>true,degree=>4,block_sample => true,granularity => 'ALL');
PL/SQL procedure successfully completed.After added group by, the access and filter appear in the plan, and they are exactly the same
SQL> set autotrace trace explain
SQL> select b,count(*) from t1 where a=1 and b between 10 and 200 group by b;
Execution Plan
Plan hash value: 1662069396
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 192 | 1344 | 2 |
| 1 | SORT GROUP BY NOSORT| | 192 | 1344 | 2 |
|* 2 | INDEX RANGE SCAN | T1_IDX | 192 | 1344 | 2 |
Predicate Information (identified by operation id):
 2 - access("A"=1 AND "B">=10 AND "B"<=200)
 filter("A"=1 AND "B">=10 AND "B"<=200) ===> *why filter happens here?*
Note
 - cpu costing is off (consider enabling it)Without group by, only access appears in the plan
SQL> select * from t1 where a=1 and b between 10 and 200 ;
Execution Plan
Plan hash value: 1720721055
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 192 | 1920 | 3 |
| 1 | TABLE ACCESS BY INDEX ROWID| T1 | 192 | 1920 | 3 |
|* 2 | INDEX RANGE SCAN | T1_IDX | 192 | | 2 |
Predicate Information (identified by operation id):
 2 - access("A"=1 AND "B">=10 AND "B"<=200)
Note
 - cpu costing is off (consider enabling it)

What's your version ?
No filter on 10.2.0.4 :
SQL> select b,count(*) from t1 where a=1 and b between 10 and 200 group by b;
Execution Plan
Plan hash value: 1662069396
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 192 | 1344 | 2 (0)| 00:00:01 |
| 1 | SORT GROUP BY NOSORT| | 192 | 1344 | 2 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | T1_IDX | 192 | 1344 | 2 (0)| 00:00:01 |
Predicate Information (identified by operation id):
 2 - access("A"=1 AND "B">=10 AND "B"<=200)
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for HPUX: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - ProductionNicolas.

If i change my Verizon plan will it effect my security deposit?

if i change my verizon plan will it effect my security deposit return after a year has passed.

I know receiving a refund for your security deposit is important MRM6M! We offer the flexibility to change your plan at anytime, without affecting your agreement or your security deposit refund! You will receive a refund for your security deposit, plus interest with 12 months of on time payments.
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport

I am currently in Cameroon, Africa and after arriving here, I added Global services to my plan in hopes to be able to use my phone to call local numbers. When I dial local numbers in Cameroon, with or without the country code, the call fails. I suspect

I am currently in Cameroon, Africa and after arriving here, I added Global services to my plan in hopes to be able to use my phone to call local numbers. When I dial local numbers in Cameroon, with or without the country code, the call fails. I suspect it may be that the phone is 3G and this area only supports 2G. Help!

cctga,
We appreciate you taking the time to reach out to us. I am sorry to hear that you are having trouble while traveling. We definitely want to make sure you have all available options. Normally when traveling internationally we reccommend setting up international services prior to leaving. When you added the services did you do so online or with a rep? It would be best to contact our global department in order to troubleshoot any and all issues with services while international http://vz.to/17KseUf.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

Will adding keywords or other metadata changes to jpeg cause file to be compressed?

Hi, I've been searching on this for hours and not finding a definitive answer.
Will adding/modifying keywords or metadata (ok if this is two seperate questions)
cause a jpeg file to be compressed again while the changes are saved to disk?
thanks for any assistance,
William

Thanks for the reply. I am somewhat clearer on exporting and I understand the non-destructive changes concept for LR.
Maybe a better question would be " Does Lightroom recompress a jpeg when writing to the XMP space in the file?" please correct me if "XMP space" is not he correct term for where keywords are stored.

Hi, I live in the UK and have an ipad2 with wifi (no 3G). I plan to visit Canada in the summer and want to know how i can access the internet while i'm away e.g. can i purchase a 3G attachment that will give me access on a pay as you go basis. Thanks.

Hi, I live in the UK and have an ipad2 with wifi (no 3G). I plan to visit Canada in the summer and want to know how i can access the internet while i'm away e.g. can i purchase a 3G attachment that will give me access on a pay as you go basis. Thanks.

You can get Mifi devices (the iPad connects to it via wifi and they then give access to 3G networks). I've never used one and I don't know if they are available in Canada (and if so how much they would cost). If you have an iPhone then you could also use that as a mobile hotspot

Global Calendar Changes Affecting Project Calendars

How do you prevent Global Calendar changes from changing the Project Calendars? When Project Calendars are created, they are copied from another calendar, say Global Calendar. Now, when the Global Calendar is updated or changed it changes my Project Calendar. How do you prevent this from occurring?

If the change to the Global Calendar is valid, it IS going to impact all local schedules. The Global Calendar is the basic Enterprise assumption. It is what contracts are written around.
If the projects are using a Global Calendar they are going to forecast the calendar, but a resource's calendar can allow performing a task anytime in the operational plan. That is the nature of high level settings and local or operational variants. Project execution is not nailed to the Global Calendar, Your original schedule forecasted from the Global structure and was accepted. If experience leads you to make change in the Global Calendar, that is reality. You will forecast the added knowledge gained from experience and set in the Global Calendar. If it creates Risk in the existing projects, deal with it locally. You record dynamic adjustments in the Actuals. You forecast local results from to-date actuals and local resource calendars. Management 'is' overcoming Global problems with local resources.
Leave the Global Calendar alone for operational exceptions. Remove exceptions from the Global Calendar. The Global Calendar is for planning. That Global Calendar is still the basic assumption, despite operational problems in your schedule. If the Global Calendar has a holiday, the projects it is assigned to forecast the holiday. Simplify your Global Calendars to match basic, high-level, factual assumptions.
Let your Resource Calendars forecast the detail of operations and overcome the Global Calendar. But actualize what happens no matter what any calendar says so calculation is up to date.
Calendars are strictly for calculation, for forecasting. You can always log progress on Christmas or during Ramadan, just as you logged no progress during the hurricane. But Joe Labor Unit will not forecast performing his task in NYCNY on even a regular Monday if his calendar has him training in Borneo. Cancel Joe's trip and change his calendar. He is available in NYCNY on the date you want now. His forecast changes, the project forecast changes. Primavera is perfectly dynamic. And the project will not forecast work on Christmas or during Ramadan if the Global Calendar says these are exceptions to your usual M-F 8-5 with an hour for lunch. Global Calendars are the sub-structure that we accept in building the initial, accepted Project Schedule and that provide the framework we analyze Risk mitigation around in operations.
"We're forecasting a late finish now due to the hurricane." "Schedule the workforce to work through the Christmas holidays." (adjust, adjust, adjust) "That brought completion in." The Global Calendar assumes no hurricanes and getting Christmas off. After the hurricane, the PM sets the operational guideline. The Scheduler adjusts the resource calendars to overcome the hurricane period's lost progress. As soon as the As-built has the adjustments, the schedule calculates and forecasts completion on time. The workforce is not scheduled to work Christmas in the Global Calendar. In their Resource calendars, now they are. The schedule forecasts work at Christmas. You mitigated the hurricane risk by overriding the Global Calendar with Resource Assignments. If you make those Resource Calendar Christmas adjustments in September when the hurricane hit, you will forecast project completion on time in the next report from P6. You pull completion back to the left after operational realities pushed it out to the right.
The original schedule is Art- planning, compromise and commitment. The ongoing fine-tuning and manipulation of As-built detail makes Art a Masterpiece by giving the heartbeat of the project and implementing the vision of its manager. Or not..

Global Metadata changes in Bridge?

When CS5 Bridge and adding my metadata changes for my photos, I cant seem to find a way to make these changes globally to several large blocks of photos. I tried to click on all the photos involved but then it refused to accept any changes. PLease! tell me there is a way? I even tried to "saved" the changes so all I had to do was one click on the new photo but that didnt work either. I'm new to Bridge so please bear with me. Thanks.

If what you want to change is description, credits, copyright and other IPTC and other metadata that is shown in File Info, you can use Bridge to change multiple image files at a time. In Bridge, select the block or blocks of images for which you want to change the metadata. Then right click and and click on File Info... in the right-click popup menu (or instead ofright click, use Control-I or File > File Info...). This will bring up File Info dialog box. If what you want to change is in a saved template, you can click on the templates button (at bottom of file Info box between Preferences and OK). Select and click desired template, which should bring up Import Options popup box. Select one of the three options, depending on how much of existing in-file metadata you want to keep or replace. Or instead of calling a template, you can make entries directly into desired File Info fields. Any information you enter in a field overrides existing metadata and applies the new value to all of your selected files.

What will happen to my unlimited 3G data plan if VZW gives me the Samsung Droid Charge 4G phone?

I currently have the Samsung Fascinate and the unlimited data plan, with a 20% corporate
discount . The 2-year contract started when I bought the Fascinate in November 2010.
If I'm not mistaken, my unlimited plan is grandfathered in, even after Verizon changed the
2GB limit for data plans.
There is no 4G service in my part of the state. There won't be 4G for at least 2 years,
according to the Verizon corporate store manager. My part of the state was the second
to last to get 3G on the east coast.
If I take Verizon's offer and accept the Samsung Droid Charge 4G as a replacement phone,
what will happento my existing unlimited 3G data plan? Can they activate the 4G phone
on a 3G data plan?
Will the 4G phone pick up 4G signal when I travel to a major city with 4G service? (nearest
city with 4G is 230 miles away)

SFObrien wrote:
If I understand their policy correct you will continue your current unlimited 3G plan and have access to 4G in coverage areas as long as you DON'T change your plan. If you change your plan new rates will apply.
Can one of the Verizon guys here verify this?
Consider it verified, Steve!

Email will not let me change fonts all of a sudden.

Email will not let me change fonts all of a sudden. It says I don't have the neccesay permissions in ~/library/preferences. this has just happened recently.

Who is your email provider?
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If yes, try deleting the mail account and adding it again.

Our family has 1 Apple id. My sons received many itunes gift cards. Can I set up sub-accounts under my id? If I create new ids, will they lose access to the content purchased under wmy id?

Our family has 1 Apple id with 2 itouches, 1 ipad and 1 iphone. My sons received several itunes gift cards. Can I set up sub-accounts under my id and deposit their gift cards into them (like a bank account)? If I can't, it seems that I will have to keep track of each of their purchases until they reach the limit of their gift cards, before they go over. This makes no sense. If I have to create new ids, will they lose access to all the content purchased under my id?

- You can't create subaccounts.
- You can create new account(s). The media on the iPod is still usable. It does create more work when updating apps since yo have to sign into the account that purchased them to update them. If you have apps purchased from more than one account that need update you have to update them one at a time until the remaining apps were purchased with one account.
- To change accounts for purchasing go to Settings> Store (or Settings.iTunes and App store depending upon the iOS) and sign out and sign in with different account.

Is there a way to do a global font change in iWeb '09?

Hi,
I inherited a web site, created in iWeb '09. I've got the site files on my Mac ... when I start iWeb,
and select a page to edit, it complains:
The following errors occurred while trying to open this page:
Missing Font TrajanPro-Regular
Missing Font TrajanPro-Bold
Missing Font HelveticaNeue-Roman
Many (most or all) pages in the web site need these three fonts.
Thru googling, I know that those three fonts are proprietary fonts that I could purchase.
However, it seems silly to buy and install a font when the web server and end-user's
browser won't have it (and will therefore get substituted at their end).
Therefore, I think that my best choice is to change all uses of those fonts in the web site to
be uses of some "standard web fonts".
So, how do I do a global font change or substitution in iWeb '09? It seems like an awfully
obvious thing to want to do. (Finding each instance of use and manually selecting the text
and doing a font change is simply not feasible.)
(E.g.: Change "HelveticeNeue-Roman" to "Helvetica Regular")
thanks,
Stan
[email protected]

how do I do a global font change or substitution in iWeb '09?
There is no way to do what you want. Send a feature request to Apple via http://www.apple.com/feedback.iweb.html.
OT

How to change the explain plan for currently running query?

Hi All,
I am using Oracle enterprise 9i edition. I have a query which frames dynamically and running in the database. I noticed a table with 31147758 rows
in the query which has no indexes and taking more time to process. I tried to create an INdex on that table. I know the query is already running with a FULL table scan. Is it possible to change the explain plan for the current running query to consider the INDEX?
[code]
SELECT /*+ USE_HASH (c,e,b,a) */
d.att_fcc extrt_prod_dim_id,
d.att_fcc compr_prod_dim_id,
a.glbl_uniq_id glbl_uniq_id,
to_date(c.dit_code,'RRRRMMDD')STRT_DT,
(to_date(c.dit_code,'RRRRMMDD')+150)END_DT,
a.pat_nbr pat_id,
a.rxer_id       rxer_id,
e.rxer_geog_id rxer_geog_id,
a.pharmy_id pharmy_id,
a.pscr_pack_id pscr_pack_id,
a.dspnsd_pack_id dspnsd_pack_id,
DENSE_RANK () OVER (PARTITION BY a.pat_nbr ORDER BY c.dit_code) daterank,
COUNT( DISTINCT d.att_fcc ) OVER (PARTITION BY a.pat_nbr, c.dit_code) event_cnt
DENSE_RANK () OVER (PARTITION BY a.pat_nbr,
d.att_fcc
ORDER BY c.dit_code) prodrank,
DENSE_RANK () OVER (PARTITION BY a.pat_nbr,
d.att_fcc
ORDER BY c.dit_code DESC) stoprank
FROM
pd_dimitems c,
   pd_pack_attribs   d ,
    lrx_tmp_rxer_geog e,
    lrx_tmp_pat_daterank p,
    lrx_tmp_valid_fact_link     a
    WHERE c.dit_id = a.tm_id
    AND   e.rxer_id = a.rxer_id
    AND   a.glbl_uniq_id = p.glbl_uniq_id
    AND   p.daterank > 1
AND   a.pscr_pack_id = d.att_dit_id
[/code]
The table lrx_tmp_pat_daterank is having that 31147758 rows. So I am wondering how to make the query to use the newly created index on the table?

Why do you think using Indexes will improve the performance of the query? How many rows this query is returning? Optimizer might chose a Full table scan when it finds out that Index plan might not be useful. Why are you using /*+ USE_HASH (c,e,b,a) */ hint? This Hint will force oracle to use Full table scan instead of using the index. Try removing it and see if the plan changes.
Regards,

Will adding global access change my domestic plan?

Similar Messages

Maybe you are looking for