Will Adobe Encore CS4 burn MTS files to an external blue ray burner if I buy one?

Will Adobe Encore CS4 recognize/burn MTS files to an EXTERNAL blue ray burner if I buy one?

Internal vs external should not matter.
I have a burned to external with CS4, but it was a long time ago.
And most importantly, Encore is not a reliable burner for many users, and they, and I, use imgBurn rather than Encore to burn.
Also, "burn an MTS" file is totally different from authoring and burning. Encore (was it by CS4?) added a limited AVCHD passthrough option. I have not used it.

Similar Messages

I have burned to my external blu ray burner 3 times, but twice ended up with glitches in the project. now it stops at 59% and won't finish sharing. How do I get it to finish sharing?

I have burned to my external blu ray burner 3 times, but twice ended up with glitches in the project. now it stops at 59% and won't finish sharing. How do I get it to finish sharing?

It's a complex project and there are a lot of possibilities. Among them is the length; there are a number of reports of projects that are approaching 2 hours failing to burn.
If it's a question of jarring Create Disk into action, one thing that has worked for some users is simply to click on and the Apply button (s) in the Settings pane of the Blu Ray Share window and then hitting Cancel. This can be tested by duplicating your project and selecting a tiny section of your sequence and exporting. Change the Output Device to Hard Drive and see whether Create Disk successfully writes a disk image.
You can also check that a specific clip isn't rendering properly. Since the process got to 59%, it may just mean that the burn couldn't be initiated by Create Disk – or it may indicate a problem with a clip toward end of your sequence. (If you can check the log, there may be something useful in there.)
Use the duplicated project and this time set a range for the last 30 minutes or so of the project and export it, using the Blu Ray destination. Again, set Output Device to HD and see whether it will complete.
Good luck.
Russ

Encore CS4 freezes when using dynamic link and blu-ray settings

I am using dynamic link to send a Premiere project to Encor using blu-ray for video and dolby digital for audio. The project gets loaded correctly. When I go to the build tab, I see the format is DVD. I can create a project using DVD as the format output to a DVD folder. When I select blu-ray as the format, Encore freezes. I want to save everything as blu-ray format so that if and when I get a blu-ray burner, I can just burn the folder layout to blu-ray disc. Is there a fix for this so that I can select blu-ray as the format?

Worked for me!
Thanks for the updates.

Save to external blue ray burner

Is it possible to burn photos edited in iPhoto to a high definition Blue Ray burner?

Internal vs external should not matter.
I have a burned to external with CS4, but it was a long time ago.
And most importantly, Encore is not a reliable burner for many users, and they, and I, use imgBurn rather than Encore to burn.
Also, "burn an MTS" file is totally different from authoring and burning. Encore (was it by CS4?) added a limited AVCHD passthrough option. I have not used it.

Premiere Elements 11 no longer recognizes my external blu-ray burner.

I have used my Samsung SE-506BB-TSBD external burner many times before today, but for some reason Premiere Elements 11 is not recognizing it. Windows 7 sees it just fine. Premiere Elements 8 (which is still loaded on the same computer) also does not recognize it.
What do I need to do? Samsung's website is no help, but I have a feeling it's an Adobe issue since Windows 7 still recognizes the drive.

rbcourter
When is your Blu-ray burner not recognized
Premiere Elements 11: burn to DVD disc, burn to Blu-ray disc, burn to AVCHD on DVD disc, or all?
Premiere Elements 8.0/8.0.1: burn to DVD disc, burn to Blu-ray disc, or both?
and when you wrote:
I have used my Samsung SE-506BB-TSBD external burner many times before today
Did "....many times before today" imply that you could use the burner for Premiere Elements 11 and 8.0/8.0.1 before. I am trying to get a whether this is a "it worked before but now" or a "it never worked before" type issue.
Do you have the USB 2.0 cable connected to a USB 2.0 computer port directly or via a USB multi port hub? I take it that this burner does not have AC support? If you are using only 1 USB 2.0 port, can you set up the burner for 2 USB 2.0 ports?
Does the computer involved have an internal burner? Or is this the only burner that you have available to you external or internal for the computer?
Let us start here and then decide what avenues of further troubleshooting are available to us.
Thanks.
ATR

Replace W520 Sony Optiarc AD-7710H DVD Burner with Sony Optiarc BD-5750H Blu-ray Burner?

I am planning on replacing the DVD burner which shipped with my W520 (4270CTO) with a Blu-ray burner. Evidently not all W520s ship with the same drives.
Does anyone know whether the front bezel on the W520 is the same for the two Sony Optiarc drives mentioned above? If not, which Blu-ray burners can accept the W520 front bezel from the Sony Optiarc AD-7710H, which is the drive my machine shipped with?
Thank you!
W520, Intel QM67 Express Chipset, i7-2760QM, 1000M NVIDIA GPU 2GB DDR3, 1920x1080 FHD LED, 16GB Corsair Vengeance PC3 12800, Intel Centrino Ultimate-N 6300, Samsung 840 Pro 256GB SATA 3 SSD, Sony Optiarc BD-5750H Blu-ray Writer, Dual-Mode DisplayPort.
Solved!
Go to Solution.

I think you swap the bezels. I did with mine.

Win Encore 5.1 won't write to LG Blu-ray burner

Encore 5.1 (CS5.5) and Win7 Pro new computer I just built. Trying to burn a DVD in Encore.
When I choose "Build" I see the drive (it's the only one on the computer) Everything seems fine. It builds the movie then gets ready to write and Encore says "Cannot Erase Disk." I put in another DVD blank try it again, and when it comes to write it says "Please insert DVD media and then close the tray and click OK." Of course the tray is closed and there is good DVD media in it. Next I try another disc and it errors out with "Encore was unable to complete the operation because of a hardware error (sense code 52102). Please contact the hardware manufacturer for more information." I give up.
So I use Encore to output an ISO file, I drag it into Nero burning rom and it burns perfectly on the first try using the same LG drive and one of the discs that Encore failed on. I've seen others say that this is the way you have to do it with Encore, but I refuse to back down to this. I've used encore CS4 for years and it burned great. Has the product gotten worse instead of better? My LG is BH14NS40 on Win7 Pro, Asus p9X79 WS, i7 3930 and 16 gigs of ram. Why won't Encore work with my drive when Nero does so beautifully? Can I expect any different results when I install CS6?

You're saying, software wise, that it's whoever gets to the drive first owns it and no one else can get in
That pretty much distills the issue.
What happens with most "packet-writing" software is that it is set up to load at boot, and actually before most of the OS loads. It then reports to the OS that the multi-drive/burner is NOT a multi-drive/burner, but is, instead, a removable hard drive. Nero and Roxio have packet-writing software, that, when installed, will "hook" the multi-drive/burner. Windows Burning Utility, can do the same. The OS believes that packet-writing software, and just flags the multi-drive/burner AS a removable HDD.
Encore (and other Adobe programs, that can burn to DVD) looks to the OS for instructions, and the OS tells it, "there are NO burners on this system - just a removable HDD." That is all that En sees, so will refuse to Burn to Disk, as no burner is reported.
Now, other burning utilities, like the free ImgBurn, do not query the OS. Instead, they go to the hardware level, and look for an APTI for a multi-drive/burner. They do not care what the OS reports, as they work at the hardware level. They can get one around such problems.
This ARTICLE goes into more detail, and also links to the FAQ Entry, that John T. has already mentioned.
One way around this is to go to MSCONFIG and in StartUp, and Services, uncheck the packet-writing module, to keep it from loading at boot. Another method is to uninstall the offending program, say Nero, and then reinstall it in "advanced," or "manual" mode, and just do not install the packet-writing module. I have Nero on my computers, but it was installed without those modules. I have no issues.
Now might also be a good time to check for any firmware updates for your LG, as they issue those fairly often. Be SURE to read the full instructions, and make SURE that you understand them completely, before you update the firmware. I recommend printing those instructions out, and having them handy, following EACH step, in perfect order.
Good luck,
Hunt

After I compress HD Video to H.264 how do I burn to an external Blu Ray Burner?

How do I burn to Blu Ray after I've compressed to H.264? Can I go through DVD Studio?

This is what the DVD SP 4 manual says re: H.264 files:
"You can use the H.264 video format, also known as MPEG-4 part 10 and the Advanced Video Codec (AVC), in your HD projects. The H.264 encoder is twice as efficient as the standard MPEG-2 encoder. When compared to encoding with MPEG-2, this means that with the H.264 encoder:... You must use H.264 for HD DVD presets in Compressor to encode H.264 video assets for native use in DVD Studio Pro HD project."
However, i cannot get DVD SP 4 to recognize the .264 encoded files using these presets (Format h.264 for Blu-ray; 1080p @ 29.97fps; NTSC; AVCHD stream). Compressor produces a .264 video format file that DVD SP rejects. Do I have to use the h.264 for Apple Devices format (m4v) instead (which also is supposed to support Chapter Markers created in FCPX)?

Drivers for LG BE06-LU10 EXTERNAL BLU-RAY BURNER

hi
i have purchased this item a couple of yrs back but i want to install it on my mac but cant find any drivers for mac ....i have no idea where to look or if there is someway of installing it ...any feedback would be gratefully appreciated
thanks

i have googled bloody heaps of stuff and to no avail ...i have the install disc but its a windows disc and cant find any drivers for mac so i can hopefully run it on here...stuffed if i know ...******* me off

Encore CS4 refuses to see Blu-ray burner

Using Encore CS4, I had previously been able to burn HD video using my LG Blu-ray burner. Recently though i have been unable to build my projects and bun to Blu-ray. I get a "None Found" from the Recorder selection of the Build Project window even though the burner does display as an option when I select DVD as the recording format. I believe that one of two possibliites exist: 1. Some other software driver has broken my blu-ray driver and Encore can no longer see it, or 2. Some other software has captured the blu-ray burner device and Encore can no longer use it. I have already removed "Nero" because i have herad that it can cause Encore grief. Any suggestions would be appreciated.

Hi,
There were some issues with Encore CS4 for blu ray on windows 7.
Install latest pxhelp from -
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS=
This may resolve this problem.
Thanks,
Pankaj Gauba

Final Cut Pro X witch Blu-ray Burner are you using ...

Using a Mac Pro Tower like the Mac Pro 2012 or similar what are the Blu-ray Internal Burners do you use ; LG or Pioneer , witch Model Number.
Creating Blu-ray on the Mac is fantastic but witch brand and model numbers for the Big Mac Pro Tower are you using with exellent results now.
On the Mac Apple Pro Apps or Roxio Toast Titanium are the only left options who are current and updated , but burners specified for Windows.
Frustration come when you talk to Apple they say not supported , Burners makers LG or Pioneer will say we dont offer support on the Mac.
Well if you can create Blu-ray on the Mac but cant get any help to burn it it is very frustrating and Not So Pro if Apple care for the Pro Users.

I use the new Mac Pro 2013. Final Cut Pro X version 10.1.4 and Maverick OS 10.9.5. An external Blu-ray burner LG BE14NU40. I've use single burn Blu-ray discs from brands like Maxell and Verbatim. That works fine. I have double layers Blu-ray discs not tried. I use it for home video’s.
DVD single works fine too. DVD double layers I have not tried but will also work i think. Reviews on LG USA stated that Roxio Titanium with corresponding plugin works.
I'm glad I found a blu-ray burner that works with FCPX. Compressor 4.1.3 but I have not been working with the LG burner. Not yet!

Recommendations on a Blu Ray Burner

Can anybody recommend a reliable external blu-ray burner that I can use on my iMac? I'm using FCE 4 and Toast 10 to burn HD DVDs and am happy with the quality, but would like to put more than 20 minutes of HD on a disc. Thanks!

Toast is a software package from Roxio that allows you to burn HD recordings. There's a few others available but it seems to be the most popular. You can do up to 20 minutes of HD on a standard DVD using a standard DVD burner, but to go longer (up to 2 hours on a dual layer disc) you will need a Blu Ray burner. And of course to view either HD DVD or blu-ray, you'll need a blu ray player. HD DVDs will not play on a standard DVD player.
I posted essentially the same question that you did QDigital, and Michal Boissonneault posted a most helpful reply with links to step-by-step instructions.
http://discussions.apple.com/thread.jspa?threadID=2189960
I got Toast Titanium Pro 10, which includes the blu-ray add in. You have to pay extra on the standard version for the add in, but it's required to burn HD.
Within a week or two of using Toast, I was in the market for a blu-ray burner...$300 USD for the burner, 10-15 for each disc.

Using an external Blue Ray Disc Drive/Burner with an imac? Can I? Brand?

I have a blue ray player in the living room and I'm just starting to research burning blue ray discs using the imac.
I have an intel based imac, 2.8ghs intel core 2 duo, 4gb sdram, 1tb hard drive.
Should I be able to safely use an external blue ray burner?
If so, recommendations as to a product?

there is no official support for blue ray drives in leopard. Steve jobs said blue ray is "a bag of hurt" referring to the licensing issues for blue ray.
As a result there is no recommended drives as they are not officially supported.
I can't recommend either as I don't use Blue ray yet.
A quick google brought up this
http://www.tuaw.com/2007/01/25/blu-ray-arrives-for-the-mac-wheres-hd-dvd/
Judging by your list of gadgets below your post, it won't be much good as it is for the Mac Pro
All I can say is that Snow Leopard may bring better support for Blue Ray, all you can do is hope!
Regards

Premiere elements 11 does not recognize blu ray burner

Purchased Pawtec external blu ray burner. Premiere elements 11 recognizes it as a dvd burner but not a blu ray burner. How can I fix this?

Long160
There is no burn to folder for Blu-ray in Premiere Elements (any version), so we cannot use that escape route. What has been used in the past as a workaround for this "no burn to folder for Blu-ray" is creating a Blu-ray disc image with Premiere Elements in conjunction with a virtual Blu-ray burner with a virtual BD-RE disc. I have written about that in the following blog post
http://www.atr935.blogspot.com/2013/11/pe12-disc-imagephantom-burner-pe.html
But, as for the Pawtec external Blu-ray burner being recognized in the Premiere Elements 11 burner location in burn to Blu-ray,
a. you may just have an external Blu-ray burner that is not compatible with Premiere Elements
b. you could try for a Premiere Elements 11 uninstall/reinstall going the route of Deactivation with in the program (Help Menu/Deactivate), uninstall via regular Control Panel route, ccleaner run through (https://www.piriform.com/ccleaner), reinstall.
Have you tried another USB port? Does the Blu-ray burner require one or two USB connections to have enough power for functioning?
Also, do you have all you operating system updates?
More later.
ATR

Adobe Encore CS4 - Encore Failed

I recently had a problem with Adobe Encore CS4 with finalising a project to DVD, and to make a long story short I had my computer totally wiped and reinstalled all programs.The problem I now have is, I export a HDV file from Avid Media Cmposer and import it to Encore but when I try to Transcode it, I get a "Encode Failed" message.
I have tried other formats "Quick Time Movie" and "Quick Time Reference" which works fine, but I get a colour burst in the video which is not in the original footage and it only appears in Encore.
I appreciate any help to solve this problem.

For CS4 you must update the Roxio component http://forums.adobe.com/thread/1309029
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Will Adobe Encore CS4 burn MTS files to an external blue ray burner if I buy one?

Similar Messages

Maybe you are looking for