Will Agreegates be hit??
Hello Experts
I have a requirement in which i have a report which is suppose to run in monthly data and has some simple addition subtraction operations to be done.
cube is COPA data cube and forecast data cube.
I have a requirement to create report with option to slice and dice by material, customer, region.
now if i create 1 agreegate by all of these above and if user tries to see report only by customer or only by material will this same agreegate be hit? or i need to create agreegates for all the possible combinations of above characteristics I mean 1 by only material then another by material and customer etc?
So in short my doubt is agreegates are hit only when exact combination of data is request as of agreegate ?
Regards
Sudeep
check page 6 and 7 of the below doc.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906de68a-0a28-2c10-398b-ef0e11ef2022?quicklink=index&overridelayout=true
many other doc can be found on the net.
M.
Similar Messages
-
I loaded Windows 8 update on my MacBook Pro on the bootcamp partition and now my trackpad doesn't work on the windows side. The keyboard works if I first hit the esc button at the opening screen. Microsoft was no help. I don't know how to delete the driver for the trackpad in OS X and reinstall to see if it corrects the problem. Any Ideas?
have found a temp solution now, before apple releases its update. this will make ur trackpad work but without any gestures and u'll have to press to select the left or right click.
here's the solution.
1. go to device manager
2 locate ur trackpad and right click and choose to update the driver.
3. select browse my computer for driver software.
4 select "let me pick from the list of device drivers on my compuet".
5 just keep pressing the "NEXT" button after that.
thats its u'll have a working trackpad for now. -
No tab will close upon hitting the "X" button in the browser.
Since the last couple updates, every computer I have Firefox installed on will not allow me to close an individual tab. I have to close the entire browser. This is very frustrating when you end up having many tabs open and you can't close any of them. I thought it was only happening on my 3 computers, however, when I installed Firefox on my mom's brand new laptop two days ago and was excited to show her the benefits of Firefox v. IE, I was very disappointed to find out her computer has the same problem.
FYI, this post shows my computer as having Windows XP. However, I'm also having the same issues on three computers with Windows 7.Time for some troubleshooting.
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]
I wouldn't be surprised of the Google Toolbar extension is involved in that problem. -
Greyed-out Movie Title will NOT Sync
Hi Folks,
I imported a short (3 min.) home movie into my Movie Folder (.mp4) in iTunes for Windows. It appears in iTunes just fine, and it PLAYS - in iTunes - just fine.
Trouble is...when I attmept to sync my U2 Video iPod, the Title for that home movie is in gray - not black like the others. I check the box so this movie will sync, I hit the sync button...and it does NOT transfer to the U2 iPod.
All other movies (w/titles in BLACK) transfer/sync just fine. The one in GRAY does not.
I did try the "Make an Apple Ipod Version" i.e. Convert...and the file it creates (.mv4) exhibits the same behavior: it shows up in my Movie folder, I can play it WITHIN iTunes for Windows, but the Title of said movie is in GRAY when I attempt to sync and it will NOT transfer. Please help! Anyone? Thanks!Sorry for the incomplete directions.
RIght-click > Get Info on the home movie. Change the title to anything else, just to make sure you have Windows permissions to change the file and it is not set to read-only. You can always change it back, assuming permissions are correct. If the change doesn't "stick" permissions are not correct. -
BP search by role brings no hits although BPs exist...
Hi All,
This is a bit of a long message but please bear with it....
We currently have a system issue that is causing duplicate BPs to be created.
We have configured: Customer Relationship Management->Interaction Center WebClient->Master Data->Accounts->Define Account Identification Profiles
to define the "Maximum number of hits that appear in the results list." (this is from the documentation provided in SPRO) to be 100 and in the filters we define a role we have setup for "Customers".
What is actually being done in the system is that the the search goes off and searches the main business partner table (BUT000) and returns the first 100 entries it finds and It then trawls through the 100 hits and filter out those that are "Customers" and returns the hits to the screen.
So, if we do a search for "Smith" the search returns the first 100 hits (who are all Employees) and then filters this 100 for "Customers". This will return no hits as none of these have the Customer role against them.
Therefore the user will just create a new customer of that name and this is why we are getting loads of duplicates in the system.
It would be nice if we could ignore any BPs who's number starts with EM, as these are the employees imported from R/3 and cannot be used (as a customer) in our system due to Data Protection issues.
I have raised an OSS for this and the answer is, basically, is to increase to max hits (which will have an impact on performance) or implement our own code as this is standard functionality.
I am hoping others have came accross this issue and resolved the problem (I have searched the forums and not come accross anyone with the same though).
Many thanks in advance
Gary HawkinsHi,
Removing the Max hits has solved the problem.
I think we need to implement our own logic to restrict the number of hits brought back to the Web IC, but the fix will stop us creating duplicates.
Many thanks for your help
Gary Hawkins
Edited by: Gary Hawkins on Jul 31, 2008 4:07 PM -
If you are a .mac user you can click on Mac in the top menu bar. It lists Account, Mail, Address Book, My Pages, etc. Under My Pages, it lists hits for my . mac homepage pages and now I notice it will show hits for 5 of my iweb pages, but how can I choose which pages it it will show the hits to? My home page is the only page which has a counter and it is not one of those listed.
Here is my site. http://web.mac.com/hooktrunk
DanThanks. That was such a simple answer I feel quite silly. I wish I could assign certain pages instead. Oh well. Thanks again.
-
Macbook (august 2006) will not run
I have had my macbook since 2006. I have OS X leopard. My problem is that it has stopped running. THe computer will run for a while, then without warning and at random times doing random things, it will shut down. When I try to start it back up I can hear it starting to access the harddrive then I hear it shut off again. I have to hold the power button till it beeps in order to get it to restart and run for a little bit more. Have swiped the harddrive and reinstalled leopard, have exerienced the same problem with and without the power adapter attached and the battery reads both on the computer and on the battery that it is full. What is going on? I am going to the genius bar tonight but would like to know what I am getting into and what to expect.
I think you might be suffering from RSS (Rapid Shutdown Syndrome)
See these links, one is the reference for the other. I'm sure if you google the topic you will find other hits as well.
http://www.macbookrandomshutdown.com/
http://news.softpedia.com/news/Apple-MacBook-owners-disappointed-38109.shtml
Mark -
Any program in finder blinks off every 5 seconds I have to hit the program to activate
Ihave an issue in finder any program I have open wil blink off every 5 seconds I will have to hit the openprogam to activate 5 seconds later it blinks off anyone have this issue? using OS9.2 Mavericks. Thanks Harold
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—again, the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
How should i increase over all buffer hit ratio.....
Hi all,
As shown below if my DB2 databse buffer Qulaity is low .. How should i increase over all buffer hit ratio..
Please advice on any sap standrd notes or procedures
Number 1
Total Size 80,000 KB
Physical Reads 6.65 ms
Physical Writes 0.00 ms
Overall Buffer Quality 86.05 %
Data Hit Ratio 85.79 %
Index Hit Ratio 87.50 %
No Victim Buffers 259,079,295
--rahulOne of the options is to simply increase the bufferpool size using the following command
db2 alter bufferpool immediate <bufferpool name> size <new bufferpool size>
However, this will affect the hit ration for a particular bufferpool. If you have more than one bufferpool, you need to identify the bufferpool(s) with worst hit ratio. In the SAP DBA Cockpit, check using
Performance -> Bufferpool
The victim buffer information is only useful in case you use alternate page cleaning.
Note that there are other options to fight bad bufferpool hit ratio - however, with your small bufferpool size (80MB) maybe increasing the size is the appropriate step.
Malte -
Movie TITLE is in GRAY and will NOT SYNC with iPod
Hi Folks,
Just imported a short home movie into my Movie Folder in iTunes for Windows. It shows-up in iTunes just fine, and it PLAYS - in iTunes - just fine.
Trouble is...when I sync my U2 Video iPod, the *Title for that home movie is in gray* - not black like the others. I check the box so this movie will sync, I hit sync...and it does NOT transfer to the U2 iPod.
All other movies (titles in BLACK) transfer/sync just fine. The one in GRAY does not.
I did try the "Make an Apple Ipod Version" i.e. Convert...and the file it creates exhibits the same behavior: it shows up in my Movie folder, I can play it WITHIN iTunes for Windows, but the Title of said movie is in GRAY when I attempt to sync and it will NOT transfer. Please help! Anyone? Thanks!Hi - The first one is .mp4 and then when that didn't "sync" (but DID play in itunes) I used the itunes menu choice to "convert" to ipod use...that one came out with an .mv4 extension (both files same size and both say H.264 codec in 'info').
So,to sum-up, neither the mp4 nor the mv4 would sync to my iPod...yet both would appear - and play just fine - within itunes. Upon syncing, the title of both goes gray.
Any ideas? Thanks! -
Backups/Archivelogs triggered via DB13 hitting errors at TSM(Tivoli) level.
We are encountering problem with our redolog/online backups that are triggered
via DB13 whereby we will
receive this error message in the logs before a failure message:
BKI5014E: Tivoli Storage Manager Error:
ANS1087E (RC106) Access to the specified file or directory is denied
We have checked with the OS side and it seems that the permissions for
all the accesses are fine. However, when we tried to manually enter the
BRARCHIVE/BRBACKUP command in the OS (AIX) the thing seems to work fine. Although we can trigger it manually in the OS, but we cannot track it through
DB13, or even schedule it, as it will continue to hit the said access error.
Thanks.Dear Kelvin,
Please reply whether you were able to solve the issue of scheduling a backup from DB13 in SAP?
We are also facing the same issue, we are able to take the backup from BRTOOLS in TSM.
We tried changing the permissions of BRTOOLS utilities from /sapmnt/SID/exe path. Even then the backup fails with the same message, please find below the logs.
BR0280I BRBACKUP time stamp: 2010-08-28 19.23.45
BR0315I 'Alter database begin backup' successful
BR0280I BRBACKUP time stamp: 2010-08-28 19.23.45
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of '/usr/sap/BSM/SYS/exe/run/backint -u BSM -f backup -i /oracle/BSM/sapbackup/.bedzpjrz.lst -t file -p /oracle/BSM/102_64/dbs/initBSM.utl -c':
Data Protection for SAP(R)
Interface between BR*Tools and Tivoli Storage Manager
- Version 6, Release 1, Modification 0.0 for AIX LF 64-bit -
Build: 358 compiled on Nov 4 2008
(c) Copyright IBM Corporation, 1996, 2008, All Rights Reserved.
BKI5014E: Tivoli Storage Manager Error:
ANS1087E (RC106) Access to the specified file or directory is denied
BKI0020I: End of program at: Sat Aug 28 19:23:45 GMT06:00 2010 .+
BKI0021I: Elapsed time: 00 sec .
BKI0024I: Return code is: 2.
BR0280I BRBACKUP time stamp: 2010-08-28 19.23.45
BR0279E Return code from '/usr/sap/BSM/SYS/exe/run/backint -u BSM -f backup -i /oracle/BSM/sapbackup/.bedzpjrz.lst -t file -p /oracle/BSM/102_64/dbs/initBSM.utl -c': 2
BR0232E 0 of 32 files saved by backup utility
BR0280I BRBACKUP time stamp: 2010-08-28 19.23.45
BR0231E Backup utility call failed
BR0280I BRBACKUP time stamp: 2010-08-28 19.23.48
BR0317I 'Alter database end backup' successful
BR0056I End of database backup: bedzpjrz.anf 2010-08-28 19.23.45
BR0280I BRBACKUP time stamp: 2010-08-28 19.23.48
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2010-08-28 19.23.48
BR0291I BRARCHIVE will be started with options '-U -jid ALLOG20100828192343 -d util_file -c force -p initBSM.sap -cds'
BR0280I BRBACKUP time stamp: 2010-08-28 19.23.49
BR0292I Execution of BRARCHIVE finished with return code 5
file permissions for BRTOOLS files,
SAPSOLMAN:bsmadm 2> cd /sapmnt/BSM/exe
SAPSOLMAN:bsmadm 3> ls -ltr br*
-rwsrwxr-x 1 orabsm dba 2132759 Feb 21 2009 brrestore
-rwsrwxr-x 1 orabsm dba 2785581 Feb 23 2009 brtools
-rwsrwxr-x 1 orabsm dba 5074068 Feb 25 2009 brarchive
-rwsrwxr-x 1 orabsm dba 6786275 Feb 25 2009 brconnect
-rwsrwxr-x 1 orabsm dba 5202913 Feb 25 2009 brbackup
-rwsrwxr-x 1 orabsm dba 5670503 Feb 25 2009 brrecover
-rwsrwxr-x 1 orabsm dba 6996331 Feb 25 2009 brspace
SAPSOLMAN:bsmadm 4>
Please help us in solving this error.
Thank you
Regards,
Vineeth
Edited by: Vineeth Damodar on Aug 30, 2010 1:09 PM -
How can I tell if my movie will be too big for a DVD?
Is there a way to see how big your project will be before hitting "burn"? I don't want to spend 30 minutes burning a disc, only to have it say ... sorry ... not enough room.
I have 5 movies (Quicktime at best quality) that total about 9.5 GB.
Right now, I'm just adding up the GB of three of them, and finding that they total only 4.6 GB. So, I assume those three will fit on 1 DVD.
But is there a way in iMovie? i.e., "Show how big iMovie is"
Thanks,
SteveYes
As Lennart writes - but mpeg-2 is a quality loss. All DVDs have this in a
varible degree on how hard and in what way the mpeg-2 coding was done.
120 min movie - Yes You'll see the qulity loss encoded with iDVD.
With DVD Studio pro and Compessor You can go as far as DVD/mpeg-2
can offer but to a high price and learning curve.
If You want 100% quality You should deliver on 2 miniDV tapes and play
back via Camera.
Yours Bengt W -
Exporting Target Group to Spreadsheet only receive first 100 hits
Hello
I am having trouble getting the Target Group to display more than 100 hits. My target will display the Current Size correctly but when I attempt to export that to a spreadsheet I only get 101 maximum. If the target group is less than a 100 it will display all hits within the target group.
Please assist.Thanks for posting the resolution.
Regards,
Anik Roy
SAP Moderator -
Hit Testing/Events on MXML Graphics/FXG elements?
I know that I can capture a click event on a Spark Group component, but there doesn't seem to be any way to capture a mouse event or other events on individual graphics components (Ellipse, Rect, Line, etc...). Any thoughts on how this might be done?
Hi,
If you place a graphic in a group then you use the group component to access mouse functionality. Using the mouseEnabledWhereTransparent="false" property of the group then the hit area will comply with only the non transparent areas of the group so for instance if you have a triangle or an elipse or line in the group only those graphics will give a hit area to the group.
The following example does just that.
David
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/halo" backgroundColor="#AB4B4B" width="400" height="300">
<fx:Declarations>
<s:SolidColorStroke id="defaultStroke" color="{NormColor}" weight="2" alpha="0.6"/>
<s:SolidColor id="defaultFill" color="{NormColor}" alpha="0.5"/>
<s:SolidColor id="hiLiteFill" color="{OverColor}" alpha="0.5"/>
<s:SolidColor id="actionFill" color="{OverColor}" alpha="0.9"/>
</fx:Declarations>
<fx:Script>
<![CDATA[
import mx.controls.Alert;
[Bindable] private var NormColor: int = 0xFFFFFF;
[Bindable] private var OverColor: int = 0x55FF55;
private function initApp(): void
protected function group1_clickHandler(event:MouseEvent):void
Alert.show("Event","Clicked");
protected function group1_mouseOverHandler(event:MouseEvent):void
mv.fill=hiLiteFill;
protected function group1_mouseOutHandler(event:MouseEvent):void
mv.fill=defaultFill;
]]>
</fx:Script>
<s:Group name="op_move" verticalCenter="0" horizontalCenter="0" width="36" height="36" mouseEnabledWhereTransparent="false"
mouseOver="group1_mouseOverHandler(event)" mouseOut="group1_mouseOutHandler(event)" click="group1_clickHandler(event)" >
<s:Path id="mv" data="M6.115,27.036L0,18l6.115-8.98v5.972c5.896,0,8.856-2.986,8.856-9.109H9.051L18,0l8.96 6,5.883
h-5.972c0,6.123,2.986,9.109,9.059,9.109V9.02L36,18l-5.947,9.036v-6.072c-6.072,0-9.059,3.03 6-9.059,9.159h5.972L18,36
l-9.152-5.877h6.124c0-6.123-3.062-9.159-8.856-9.159V27.036z" fill="{defaultFill}" stroke="{defaultStroke}"/>
</s:Group>
</s:Application> -
Hit/Stat/Visitor Counter
I’m looking for a page/hit/stat counter that I can
embed into my index.html page, (or my AS2 index.swf) file that will
track page hits, referring urls, etc.
This is for a template site for my clients, and because I do
not have time to edit each individual template to update
codes/etc., I need to be able to embed this into the index files
and have it work for every new site I set up.
I realize there are free trackers out there, but for all that
I have found (ie. statcounter.com) you have to setup new accounts
for each template and embed new code into each index.html
file…which is what I want to avoid.
Any ideas or products or designers out there that can come up
with something?
Thanks"ccdesigner" <[email protected]> wrote in
message
news:elkja4$ft5$[email protected]..
> bregent,
>
> My web provider (IX Hosting) only provides a counter
that counts the total
> number of hits to a site and not by the page hits.
>
hits are irrelevant. a single page with 10 graphics would
generate 11
"hits". Using a "counter" is ineffective because that counts
how many times
that graphic has been loaded, not how many visitors one may
have had. And if
someone visits with javascript turned off and/or images
turned off, your
"counter" would not register the visit.
the only way to get reliable info is to take your log files
and parse them
through an analyzer.
Maybe you are looking for
-
I have upgraded an existing WebDB 2.2 application to Portal 3.0.6.6.5 and I am still able to access the ported procedures directly thru URL (like http://<hostname.domain>:7777/pls/NATT/OSNASS.NSARS_RPT.show). In my previous application one of the rep
-
Hi Everyone, I am building a hierarchy with interface tables in which I specify a shared member. In the interface table, I assign a null datastorage and a 0 for the ISPrimary to designate the shared member. The stored member has a datastorage of stor
-
OIM 11g - Exception while starting server 'oim_server1'
Hi all, We are trying to install the OIM 11g and having issues starting the OIM server (SOA and OAM server is alos not starting up) in the weblogic enterprise console. The error message we are getting is "Exception while starting server 'oim_server1'
-
I need to reset my security questions. However, the email address in the hypertext link is wrong, so I never receive the "reset" email from Apple. How do I change it?
-
When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?