Will Airport Express transmit sound from an iMac's "DVD Player"?

I am playing a DVD on my Mac’s DVD Player application, and projecting the movie to a screen at the front of the room. Can I wirelessly transmit the sound track to a powered speaker at the front of the room via my Airport Express?

You should be able to if you use a third-party application like Rogue Amoeba's Airfoil.

Similar Messages

I am using an airport express to stream from iTunes to my stereo. My router is a net gear type G. Setting up is no problem for the first time. But, when I close iTunes then restart I have to reset (using the reset button)and reset up. Wanna do it one?

Using a. Airport express to stream from iTunes. My Router is a Netgear type G. The express sets up fine and works the first time. When I try to use it at a later date after closing then reopening iTunes I have to physically reset the express and then go through the process of finding it again. Is this normal?

I have a 3rd generation (802.11n capable, 2.4Ghz only) airport express, my problem is that I've tried using it to extend my network and that brick wall, no matter how close I get the express to the room, the signal and throughput in that room becomes abysmal.
As you might imagine, brick is a lot like cement, and it will not allow much of the wireless signal through.
Regarding your Express, there is no such thing as a 3rd Generation model....yet. You likely have a 1st Generation AirPort Express. Check and confirm the Model No on the side of the Express. A 1st Gen model is A1264.
Here's my problem, I don't think the express supports "extending" a network from a wired network jack.
The Express can "extend" wirelessly, or using an Ethernet connection. The configuration for this is very simple, but post back if you need it.
The jack just seems to be shut off
Have you temporarily turned off the wireless on a laptop and tried to connect it using an Ethernet cable to the wall jack as a "test"?
If you can get a good Internet connection this way, then you know the Ethernet cabling and jack are working correctly.
On the other hand, if you cannot get an Internet connection on the laptop during this "test", then this indicates that the Ethernet cable or jack is not functioning correctly and the wiring will need troubleshooting before you can proceed any further.
I need to create a whole new wireless network in this room for this configuration to work?
AirPort Setup will take care of this for you automatically during the configuration of the AirPort Express.
If I have an apple TV connecting to the express and an AppleTV connecting to the extreme, will they both be visible when connected wirelessly to either network?
Yes
Will I be able to connect to my network seemlessly?
Yes
Post back after you have confirmed that the Ethernet cable and Ethernet jack are functioning correctly in the temporary "test" mentioned above. Then, we will continue.

I cannot get any sound from my imac

Hi
I cannot get any sound from my imac either itunes or alert sounds I've checked that everything is turned up and not muted
thanks in advance

If a simple reboot doesn't fix it, try resetting the SMU.
Depending on which iMac you have, one of these links will explain how.
Resetting the SMU on a G5 iMac:
http://support.apple.com/kb/HT1767
and on a Power Mac G5 :
http://support.apple.com/kb/HT1436
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379

Will airport express work with 3G wirelessly without access to Y Fi connection ? (usinmg an iPad )

I do not have wi Fi at work. Will airport express work with just the 3G on my Ipad2?

In addition to Keith's comments, if you are asking if the iPad can configure an Apple router like the AirPort Express, the answer would be yes, if you download and install AirPort Utility from the App Store. It's free.
I'm assuming that you have a newer version of the Express. Check the Model No on the side of the device. It needs to be A1264.
http://itunes.apple.com/us/app/airport-utility/id427276530
if you do not have an Ethernet Internet connection to connect to the Ethernet port on the Express, you can still use the Express to "Create a wireless network", but of course devices will not be able to connect to the Internet. The Express will complain, but you can ignore the error messages.
If your printer is wireless, hopefully it is an AirPrint compatible printer. Then you would be able to print from the iPad. Check this Apple Support document for information about compatible printers. There might be other applications that would allow this as well. Check Keith's post for that info.
http://support.apple.com/kb/HT4356
I'm still not clear on exactly what you are trying to do, and devices that you have, so if you can state your goals again....we can make sure that we are not missing something.

My Mac Mini will not read TDK disks from my iMac G3.

My Mac Mini will not read TDK disks from my iMac G3.
I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number A1347) I cannot get this computer to read those disks, made on the iMac G3. Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
DJG

Try disconnecting everything attached to the Mini except the monitor.
If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode

I cannot hear the audio from my Apple TV when the speakers connected to an airport express is selected from AirPlay

I cannot hear the audio from my Apple TV when the speakers connected to an airport express is selected from AirPlay

me-p wrote:
Is it true?
for the time being, yes.
however, Airfoil can do what you want.

Will airport express be compatable with windows vista

will airport express be compatable with windows vista

vista will not be compatable because I do not have the capability in vista to download AirPort Utility 5.6.1 for Windows, which is a requirement for the ethernet connection to the Airport Express. Is that correct?
No, sorry for the confusion.
You would need 5.6.1 on the PC only if you intend to use that to initially setup and configure the Express. I understand that you will be using the Mac to setup the Express, correct?
5.6.1 is not needed if all the Vista machine will be doing is connecting using Ethernet or wireless to the network. You don't have to install anything on the Vista machine if all it will be doing is connecting to the Express.

When will airport express support 802.11ac

when will airport express support 802.11ac

We are all users here on a user-to-user support forum......just like you.....so no one here will have any idea about what a notoriously secretive company like Apple might do, or when they might do it.
If Apple makes an official announcement regarding a new product, then we will all know.

When I try to burn my slideshow.mov to a dvd disc, it will burn but when i put it in the dvd player it says 'disc error'. I have burned it thru iDVD before but forgot how to do it and it won't do it now. The slide show is on my desktop

when I try to burn my slideshow.mov to a dvd disc, it will burn but when i put it in the dvd player it says 'disc error'. I have burned it thru iDVD before but forgot how to do it and it won't do it now. The slide show is on my desktop

Rather than burn directly to disk follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on the Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on my Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

I used iDVD to create an IMG file
You created the video DVD, the IMG file, with iDVD and just burned it with Disk Utility. As Klaus1 pointed out Disk Utility can't create video DVDs.
OT

Will there be a possibility to stream music from iMac safari to airport express via airplay - from youtube for example?

hi, i want to stream music from my imac to my airport express station via airplay. but not only with itunes, but also from safari (youtube) or other programs like games etc.
is there - or will there be - a way?
thx
monimor

Thank you for the answer, but airfoil is pay-software. on ipad and iphone there´s airplay for allmost every application - without extra payment.
i wonder, why apple provides airplay only for mobile-devices.
regards
monimor

Airport Express streams Airplay from iMac but not from Windows 7 PC

I have a wireless network set up using a Linksys WRT45G2 v1 router. There is one iMac running Snow Leopard, one laptop running 32 bit Windows 7 Ultimate and one desktop running 64 bit Windows 7 Ultimate. The router is set to WPA2 Personal TKIP+AES security. The Airport Express is set to WPA2 Personal. Its wireless mode is "join a wireless network." It is running firmware version 6.3. The iMac and the laptop are running iTunes 9 and the desktop is running iTunes 10.
Up until recently I was able to stream music from the iMac and the desktop but not the laptop to remote speakers using airtunes via the airport express. Then the video processor in my desktop PC failed and in the course of diagnostic testing I had to reinstall the OS. After replacing the video card and reinstalling the OS, I tried to reconnect Airport Express to iTunes on the desktop PC but Airport Utility could not find the Airport Express. I returned the Airport Express to factory settings and tried again. The PC still did not recognize the Airport Express. I couldn't use the PC to reconfigure the Airport Express, but the iMac did see it so I reconfigured the Airport Express using the iMac. Now I can stream music using Airport Express from the iMac ONLY.
When I use the Airport Utility to scan on the desktop or the laptop PCs it does not see the Airport Express. I can, however, see the Airport Express and read its configuration using Airport Utility on both PCs by using "configure other..." under the File tab (i.e. by typing in the IP number and password for the Airport Express.) Even though I can read the configuration and save it, iTunes does not recognize any remote speakers and I cannot stream music from either PC.
I have tried turning off ALL wireless security as well as all firewalls. I also tried both iTunes 9 and iTunes 10 on the desktop. Nothing makes any difference.
Before I could at least stream from desktop even though I had never been able to get the laptop to stream.
Can anyone suggest a way to get Airtunes (Airplay) to work from my PCs?

I have had the same issue. Airplay working with all devices apart from one windows 7 (the actual media server) and have spent over a week trying to resolve it.
This worked for me.
Turn off windows firewall and in my instance macafee. Be warned while macafee says that it's off there are services running all the time.
You will need to open macafee settings and turn off access protection first
Then search services from start bar
Open services and filter by manufacturer
Stoop all macafee services
Right click the start bar
Open task manager
Stop all macafee processes
Try your airport utility you should now see your express
If you can you will see your icon in iTunes
This pores that it's likely to be a macafee issues. Of course you do not want to leave the firewall off so I installed macafee and installed a fresh copy turning both the windows and macafee firewall on with no resultant issues
Hope this helps

Airplay from iPhone to Airport Express - no sound?

We have two of the new Mac Minis, one new Airport Express and 4 iPhones in the house - and we can use Airplay from both PC´s to the Airport Express hooked up to the stereo - works fine!
And we can se the Airplaybutton on the iPhones and the name of the Airport Express - but we don´t get any sound when we push the button and it turns blue?
We have rebooted alle the devices, made restores, reconnected - but no sound? I just don´t get it?
Message was edited by: Joost40

Same here:
- iPhone 4 with iOS4.2;
- Airport Express with latest firmware;
- Airplay on iTunes 10.1 with Macbook Pro works fine on my home stereo equipment;
- installation of iOS4.2 went fine;
- rebooted already both iPhone and Airport Express;
- Apple support told me to restore original settings on my iPhone, which I didn´t do but very much doubt would help anyway (the lady working for Apple Support didn't even know what "Airplay" was).
I think we are facing a bug and must wait for an Airport Express (or even iOS4.2) software update.

IPAD/IPOD playing music to a Airport Express - No Sound?

I have an IPAD and an IPOD. IPAD is 4th gen, IOS7. IPOD is 4th gen, IOS6.
Airport express is the new one second generation. Airport Express is wired to my home network, and its in bridged mode with wireless off. Its purpose is only to play music via airplay.
When I turn on airplay on my IPAD or IPOD I can always see my Airport Express. It always allows me to select it as my output speaker. However, only sometimes does music actually play through my Airport Express / Stereo setup. The IPAD or IPOD always shows the music playing in its music playing app. It appears as if its working. I just cant always hear it.
If Im trying to play music but no sound is coming out of my stereo, I can power off my IPAD or IPOD, then try playing music again and it will work. This is a work-around to my problem that really bugs me. I want to properly diagnose this problem so that I do not have to power cycle my iDevice before using airplay.
Ive read many posts about Airport Express sound problems. Most problems seem to be either short audio drop-outs, or not detecting the Airport Express. I think my problem is different.
I have read some people had success downgrading their Airport Express firmware to 7.6.1 to fix the short audio drop-outs. I have not tried this as my problem is not worth audio drop-outs. Its with no sound at all playing.
I am begginging to think the Airport Express isnt as rock-solid for airplay as I thought.
QUESTIONS:
Are there any tools available for troubleshooting this type of problem? The knowledge base articles Ive read from Apple have been no help.

Unless your iMac was made before 2006 (this forum is for old iMacs), you might get better assistance by posting in one of the following forum areas:
AirPort
Using iPad
iMac (Intel)

I'm having trouble with my airport express continually disconnecting from my network.

I have my airport express set up to extend my network wirelessly from my Airport Time Capsule base station. My base station is setup in the basement connected to my Comcast internet router (Motorola Surfboard SB6141). My Airport Express is on the main floor in our computer room and is connected via ethernet cable to my iMac. About 1x/day the express drops connection to the Time Capsule and the only way I can seem to get the extension back up and running is to stop/start the Time Capsule. Any ideas on what is wrong?

The easiest way to set up to most provider routers is to set up the time capsule to bridge mode with dhcp enabled--meaning the time capsule pulls an IP address from the providers router. Then connect the other express or extreme to time capsule using apples built in bridging.
Doing it this way gives your network one dhcp server--the providers router. This way you will be able to reach all your providers tv receivers for the app controllers because all devices will be on the same subnet.
The trade off is the controlling device for firewall and ports is the providers router. So if you want remote access to your hard drive in the time capsule you will need to allow this through the providers router.
To me it sounds like you have 2 dhcp servers and when you reboot the dhcp server that boots up the quickest give the IP address out. Then when the time to live timer expires and the devices needs to check and make sure it is still good with its IP address another dhcp server steps in and causes your issue.

Will Airport Express transmit sound from an iMac's "DVD Player"?

Similar Messages

Maybe you are looking for