Will airport extreme provide better service than the virgin super hub alone

I'm about to switch from BT to virgin with a 152mb connection. Will adding an airpot extreme give me better service. Also as I'm not technical I'm assuming the extreme can handle those speeds.
Thanks in advance

Two things to consider:
The AirPort Extreme, unlike the BT or Virgin super hub, does NOT have a built in Internet modem. You would still need to use either of those hubs with the Extreme.
Regardless of which router/gateway device you use, they will NOT improve the download/upload bandwidth of your Internet connection.
Based on the information that you provided, unless you specifically need to extend the wireless range of the new Virgin gateway, you don't actually need to use an AirPort Extreme.

Similar Messages

  • I have installed Airport Extreme in my study where the Sky broadband hub lives.  The internet is great in the room where the hub and the Airport Extreme live, but when I go to another room in the house, the internet connection fails.  Help?

    How can I increase the range of my Airport Extreme?  I don't live in a particular large house...I just want to be able to use the internet throughout my house.  I purchased the Airport Extreme on the understanding that I would be able to access the Wifi connection throughout the house.  Any ideas as to what I'm doing wrong, if anything?

    Are your walls made out of sheetrock by any chance?
    You could purchase another apple router, and set one to EXTEND the other to increase your range.

  • Will Time capsule work easily with a Virgin Super Hub ??

    I'm a bit of a moron when it comes to anything to do with Computers. Have had my I Mac since February and Love it , so easy to use. Im looking at Back up Storage now and whilst visiting an Apple store they recommeneded the Time Capsule as not only will it give me the storage but it also strengthen the Wireless cover in my home. I use Virgin Broadband and have a Virgin Super Hub. I have read it is easy to connect, but bringing you back to my opening line I am really bad at understanding what will need to be done. Any help in talking to a simpletone in easy to understand language will be greatly appreciated.

    I am not sure what the virgin super hub is.. but assuming it is a router with ethernet ports.. and you have one spare ethernet.. then yes, a TC is a great device for you..
    I am not sure if you are asking for buying info or setup info because you have bought one.. but the setup is simple if you load the 5.6 airport utility.. I cannot tell you how to do it from the internal version 6 in Lion.
    http://support.apple.com/kb/DL1482
    Download and install.. this is simply a more tool version of the utility.. whereas the Lion one is more a toy version.
    Go to the manual setup, then internet tab.. down the bottom you will see connection sharing.. the option to choose is off, bridge mode.. update the TC..
    Then you can plug it into the virgin router and it will simply work in the network as a network drive.
    Wireless can be tricky but for now leave on auto.
    If you actually have issues.. think of the network as the washing machine.. get the technician in to fix it.. just like you do the washing machine.. I find it hard to understand why people expect to be able to do everything themselves.

  • My westel modem (that I rent from my phone provider) quit working with the internet.  My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme.  Do I need the modem?

    My westel modem (that I rent from my phone provider) quit working with the internet.  My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme.  Do I need the modem?  Is the ethernet route less efficent that going throught the internet connection?  If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall?  Thanks for help on this!

    Ok, so are you saying that your Internet is or isn't working?  Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)?  If it is working this way, then a new modem isn't going to solve a problem with your Internet not working.  If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow.  If it runs fine this way and then slows back down when you go back through your router there is something else going on.  Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any?  Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

  • How to allow access to my airport extreme network for more than one wirelss device at the same time

    I received a Kobo Vox ereader for Christmas and have not been able to connect to my home wireless network. It works with unsecured networks and I tested it out at an Apple reseller with their airport extreme netwok and it connects fine.
    It seems as if I cannot have more than one wireless device connected to my home netork at the same time.
    So here is what I did to test this out:
    - I powered off the Kobo vox
    - I shut down my macbook
    - I turned off the modem and unplugged the power cord and removed the cable connection from the modem.
    -  I also unplugged the airport extreme router.
    - I waited for about 15 minutes and then set it all up again and turned on the power to the router and the modem
    - I turned on the kobo  vox (I left my laptop shut down)
    - my kobo vox was able to connected to the internet.
    - I powered up my laptop and it couldn't connect to the internet.
    So, I went through the above steps again and powered up my laptop first and was able to connect to the internet. I then turned on my Kobo and was not able to connect.
    It seems as if I can only have one device connected to my wireless network at one time and that device is the first one to be powered on and connected to the internet.
    Am I missing some network or airport extreme settings...
    thanks

    Try the following on your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Internet icon
    Click the Internet Connection tab
    Change the setting for Connection Sharing to read Share a public IP address
    Click Update

  • I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an antennae?

    I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an additional antennae?   If so, which one because my research is confusing me about what is supposed to work with this computer.

    Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

  • Does the Airport extreme provide any sort of usage reporting? Either per user or aggregate usage of the broadband port

    Does the Airport extreme provide any sort of usage reporting?  Either per user or aggregate usage of the broadband port

    No. You may be able to retrieve that information from your ISP.

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • I have AirPort Extreme and cannot connect to the internet with a land line but the WiFi works

    I have an AirPort Extreme and have been using for several months successfully, but as of two weeks ago, the line that I have hooked up to my desktop no longer provides internet service, but the WiFi works fine for the I-Pad and I-Pod.
    I have checked with my service provider and my modem works successfully hooked up the the AirPort extreme or directly to the PC.  When I am hooked in from the modem directly to my PC, I have internet for my desktop, but of course no WiFi.
    If I connect the Modem to the Router and the router to my desktop, I have WiFi, but no internet service to my desktop.
    I have replaced the network cable but to no avail.
    Any suggestions?

    It appears that there may be something amiss with the Ethernet switch that is built-in the 802.11n AirPort Extreme Base Station (AEBSn) or its configuration settings may be incorrect. I assume that you also tried using the other LAN ports on the AEBSn and the outcome was the same ... no Internet access via a wired connection.
    One thing to try is to change the Ethernet adapter settings on the PC. It is possible that its current settings may be appropriate when connected directly to the Internet modem, but may be off for connecting to the AEBSn. If your PC's Ethernet adapter has options to control Speed, Duplex, & MTU, I would change these to the following respectively: 1000 Mbps, Full duplex, & 1500

  • I own an imac 2011 running osx 10.6.8. I want to the new airport extreme. but it says in the system requirements that it needs osx lion 1.7.5 or later. would it work with my older osx 10.6.8?

    i own an imac 2011 running osx 10.6.8. I want to buy the new airport extreme but it says in the system requirements that it needs osx lion 10.7.5 or later. would it work with my older osx 10.6.8?

    In order to set up and install the new AirPort Extreme:
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
    would it work with my older osx 10.6.8?
    Yes, if you set up the new AirPort Extreme using the guidelines above. The 10.6.8 Mac will be able to connect to the AirPort Extreme, but it will not be able to make any configuration changes.
    Only the devices listed above can be used to set up and make any changes to the new AirPort.

  • Will Airport Extreme Network with Panasonic Viera TC-P50ST30

    Will Airport Extreme Network work properly with Panasonic Viera TC-P50ST30 HDTV?

    I don't have this particular model, but I do have a Panasonic TC-P42GT25 plasma which has no difficulties accessing the Internet through my 4th Gen AirPort Extreme Base Station or 4th Gen Time Capsule.

  • Will airport extreme card work on other wireless systems

    will airport extreme card work with other networking systems such as time warner cable with a router?

    Note, Airport Extreme on PowerMacs is limited to 802.11g.  If you find you get a router that is 802.11n, and have devices that need 802.11n speed, they should be on a different wireless network.  Otherwise you can set the network to be 802.11n and 802.11g for both 'n' and 'g' devices to hook up to it from the router in question.  Be sure the PowerMac in question does support Extreme, and not just the original Airport by visiting this article:
    http://support.apple.com/kb/ht1621
    And identifying your Mac in this article:
    http://support.apple.com/kb/HT3082
    If you can't find your Mac on the article, go to Apple menu -> About This Mac and tell us the Machine ID. If it is a notebook, the name of the machine is on the screen frame. If it is a machine with a display and a built-in optical drive that has no name, it may be an iMac.  That is significant as well.  Since you posted in the PowerMac forum, without telling us your machine, we can't help you further until you do.

  • Airport Utility cannot find my Airport.  It is nearby, no interference, and worked for about 9 months.  The Airport still provides wireless internet for the household, though it won't recognize the printer -- plugged in or wireless.

    How can I get Airport Utility to find my Airport?  It is nearby, no interference, and worked for about 9 months.  The Airport still provides wireless internet for the household, though it won't recognize the printer -- plugged in or wireless.

    Are you using the latest version (5.5.2) of the AirPort Utility to access the new 802.11n AirPort Extreme Base Station (AEBSn)? Your tagline has it that you are running OS X 10.4.6. You would need at least 10.5.7 to run the utility. I assume that you are running the latest utility on another device ... correct?
    When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
    o Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
    o Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
    o Perform a "factory default" reset on the base station.

  • I can not set up my airport extreme, he's worked over the internet but I can not back up

    I can not set up my airport extreme, he's worked over the internet but I can not back up

    ''donngra [[#answer-685379|said]]''
    <blockquote>
    ''FredMcD [[#answer-685331|said]]''
    <blockquote>
    Your System Details shows;
    Installed Plug-ins
    Shockwave Flash 15.0 r0
    Shockwave Flash 11.5 r502
    Having more than one version of a program may cause issues.
    Grab the uninstaller from here:
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
    Then reinstall the latest version.
    Flash Player '''v16.0.0.296<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
    Shockwave Director '''v12.1.6.156 http://get.adobe.com/shockwave/'''
    </blockquote>
    </blockquote>

  • Can I connect my new AirPort Extreme to a PC as the hub instead of a MAC?

    Hi,
    I bought a new 27" iMac today and an AirPort Extreme.  However, my husband and I want to connect the AirPort Extreme to our cable modem and our PC laptop as the "hub," and then wirelessly link my iMac, my iPhone, my iPad, and our Apple TV to it.  This is because of where our cable jack is located. 
    Is this possible?  It seems not to be working when hooked to the PC?? 
    Cab nan anyone help me?

    Basically it is going to not be possible..
    If you want to run the Airport Extreme a long distance from the cable modem.. then either buy an express and plug that in to the cable modem and wireless extend that to the TC..
    Or buy a set of EOP adapters and use that in place of ethernet.. which is the one and only "RIGHT" way to do it.

Maybe you are looking for

  • How to transfer purchased songs from ipod touch to itunes

    how do i transfer songs i bought from the wifi music store onto my itunes library? i manually manage my music so when i hit sync, it doesn't do it. when i hit file, transfer purchases from my ipod, it transfers all purchased songs, even ones i bought

  • Password on HTML DB APPS

    Hi guys , I working on this existing application.I have sys admin on the database which this htmldb apps reside.But the last dba did not document how to log in in this apps as admin/sysadmin.Can any one show me how i can tackle this?

  • Flash 8 Installed but not working

    I have two "administrator" level users on an Win XP sp2 machine. I upgraded to Flash 8.0.24.0 under user one and it works fine. When I log on to the user two and access a site with a flash movie it displays the icon telling me I must update to the ne

  • Menu Not Showing

    This is my first try using Encore DVD. I have designed a menu, then transcoded my project. However, when I play the resulting DVD, the menu I designed does not appear. Instead the DVD autoplays. How can I make my menu appear? Thanks.

  • PSCS4 Crashes related to MMXcore?

    I'm seeing a very repeatable pattern of PSCS4 crashing during an image resize from 3200ppi to 400ppi Each time it is of type EXC_BAD_ACCESS (SIGSEGV) and exception code: KERN_INVALID_ADDRESS each time the crashed thread looks like it does here: Threa