Will Airport/time capsule work if physically located on the second floor of the house, versus the ground floor?, Will Airport/time capsule work if physically located on the second floor of the house, versus the ground floor?

I want to know if the location of the time capsule makes a difference in it's performance. Will it work the same if it's located on the second floor of my home, or does it need to be located on the bottom floor?

The performance of any wireless device is affected by the distance that the device is located from the wireless router and the obstructions in the signal path.
The wireless signal weakens with distance. Obstructions like walls and ceilings always absorb part of the signal.
As to whether your Time Capsule will work well upstairs, it is really not possible to predict wireless performance in advance.
But if you have a Mac laptop, you can get a rough idea of the available signal strength by looking at the AirPort icon at the top of your screen.
If the Time Capsule is located on the bottom floor now, move your laptop to the proposed "new" upstairs location of the Time Capsule and check the signal strength at that location.  Ideally, you want "full bars" for best performance. If you get a strong signal, the Time Capsule will probably work OK upstairs.

Similar Messages

  • I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

    I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

    What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
    Tell us what network setup you are using..
    If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

  • HT4995 My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

    My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • How can I make the 10/100BASE-T Ethernet port on my Airport Express work as a LAN-port? The AE is currently extending my network (generated by a Time Capsule)

    Dear all.
    I currently have a WIFI-network established by a Time Capsule. I want to use my Airport Express as WIFI-receiver for my Samsung TV. How do I pair them up so that the 10/100BASE-T ethernet port works as a LAN-port? I used to do it by setting it up as WDS but I understand this is not suitable for a "n" network.
    Thx.

    Under the wireless settings for the TIme Capsule, make sure that there is a check mark next to "Allow this network to be extended"
    Then configure the AirPort Express to "Extend a wireless network". The Ethernet port on the Express is automatically enabled in this type of configuration and the AirPort Express will also provide more wireless coverage in the area where it is located.
    See Apple's instructions in the link below. The iilustration shown in the support document shows an AirPort Extreme as the extending device, but the setup for the AirPort Express would be exactly the same
    http://support.apple.com/kb/HT4259

  • HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

    I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

    What model and firmware is the 2TB TC?
    What firmware is the AE?
    Does the AE get good signal from the TC in its current location?
    Signal can only be extended that is received intact.
    Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
    I am fairly sure you are going to tell me your TC is AC model..
    I would do a couple of things..
    1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
    2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
    3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
    Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
    http://support.apple.com/kb/HT5606

  • AirPort Express/Time Capsule WDS Network - will this work?

    Have recently bought a Time Capsule but realised that it won't do what I want with my Linksys ADSL wireless router. I think I understand how to make it work with an AirPort Express, but would appreciate it if someone could confirm my ideas before I buy even more hardware!
    My situation is that my ADSL line comes in to the house on the ground floor. There's no extension phone sockets and I don't want or need them. My home office is on the first floor.
    What I want is to have my ADSL modem and a wireless device on the ground floor, the Time Capsule in the home office with mac and XBOX making wired connections to it, and a USB printer also connected.
    If I get a DSL modem and then connect an AirPort Express to that, can I then set up WDS so that the Time Capsule becomes an extension of the WLAN and I can connect the devices to the Time Capsule via wires? Or do I need an AirPort Extreme to do this instead of Express? Or is it just plain not going to work?
    Thanks in advance for any advice!

    I am using a Time Capsule with an 802.11g Airport Express with a WDS network. In my case the Time Capsule is the main device and the Airport Express is the remote device, but I'd think it would work the other way. Just make sure you're using "Airport Utility", not "Airport Admin Utility" to configure it.
    One other thing: I found it easiest to reset both devices to factory default settings and use the Airport Utility wizard to set up the WDS network on both devices. Good luck!
    My network:
    DSL ]--[ Time Capsule )))((( Airport Express

  • Airport TimeCapsule wireless works fine, but iMac can no longer find the time capsule disk for backups.

    Hi,
    I have a new Airport TimeCapsule that I set up about two weeks ago in combination with a new iMac running OS 10.9.4.  It ran fine until 2 days ago, when the TC disk image disappeared from the iMac and Time Machine was not able to back up.  I tried to find the TC in Airport Utility and it states the "Airport Time Capsule was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet..."  I've tried restarting the time capsule. I've tried restarting everything in order (modem>TC>iMac) and the iMac still cannot see the TC disk.
    I've had two other issues that I will list in case they are all related somehow:
    1) The time capsule took several attempts to set up when I first bought it.  I had to reset the TC several times before I got all the way through the set up process successfully.
    2) I tried hooking up my printer to the USB port on the airport time capsule and although my MacBook could see it and print to it just fine, my iMac was never able to see it.
    The TC is hooked up to the iMac via ethernet cable.  Does any of this sound familiar to anyone?  I'm about ready to send the time capsule back and just resurrect my old airport that worked flawlessly for years.  This airport TC has been a huge disappointment so far.
    Thanks

    There are some real issues between Mavericks and TC .. (or just network bugginess!!)
    There is a heap of things you can do but it is easier to just run through the whole lot in order. None is necessarily the cure and that is why doing all is important.
    The list is in this thread.
    Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule
    In your case using ethernet can be a problem.. let me say please make sure you have ipv6 set to link-local only in your ethernet setup. I usually only show it in wireless but for you it must be ethernet. The wireless connection seems to be utterly required now for connection.. and hidden away into the airport utility is a switch over from wireless to ethernet. When I made the manual setup instructions above this particular ability (or stupidity) of the Airport Utility was not apparent to me.
    So here is typical Airport Utility (AU) v6.. but it is actually working over wireless only. (The v5 utility was wireless + ethernet).
    I have an ethernet client on the network that is completely invisible.
    Click on the Other WiFi Devices (wrongly named.. it should say other devices).
    And you will see the option to choose ethernet.
    Then the AU sees the ethernet client and none of the wireless clients.. brilliant stuff eh??
    PS this is just a test setup.. never would I have any TC with such an illegal name.. But I hope it shows you what to do.
    Fix the names.. most important.. keep them short.. less than 10 characters all the better.
    No spaces and pure alphanumeric.

  • My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

    Time Capsule Airport
    Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
    Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

    This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
    In the airport utility bring up your Time Capsule.
    Simply post the screenshots here.
    So here is mine.
    Click on the Edit button and give us the Internet and Wireless and Network tab..
    eg.
    Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
    This is wifi in your computer.
    The following are important..
    DO not use long names with spaces and non-alphanumeric names.
    Use short names, no spaces and pure alphanumeric.
    eg TC name. TCgen5
    Wireless name TCwifi
    Use WPA2 Personal security with 10-20 character pure alphanumeric password.
    read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
    OS X Mavericks: Time Machine problems
    Mount the TC manually in finder.
    AFP://TCgen5.local
    When asked for the password .. that is the disk access password and save it in the keychain.
    Reset Time Machine
    See A4 here. http://pondini.org/TM/Troubleshooting.html

  • 2 computers at home working with the same files i keep on an external hard drive to free up space the internal drives. I have an airport extreme time capsule to back up both computers. how can i get it to back up the hard drive plugged into time capsual?

    I want to run both my macbook pro and imac from a single external hard drive.
    i bought a time capsual and set it us as my network and plugged my external hard drive into it. so now both my computers can access it and work on the same image and film files. the time capsual does a lovely job of backing up both my computers and my wifes. but i cant get it to back up the external hard drive that is conected to it. ive looked on the forum and it seems to me that its not possible, which seems odd to me that mac would enable you to plug a hard drive into the time capsual but not let you back it up, what is the point in that!?
    so my question is can i back up the external hard drive with time machine, and if not how do i set up my home network so that all my computers can access the same files and time machine will back everything up?
    I did the upgrade to maverics on my imac which has caused me a major headache as now all my apature albums have been updated to 3.5.1 but my macbook pro can no longer open them because im unable to upgade it to maverics, but thats another story.
    If anyone can help me with my time machine issue i would be very greatful.
    many thanks

    i cant get it to back up the external hard drive that is conected to it. ive looked on the forum and it seems to me that its not possible, which seems odd to me that mac would enable you to plug a hard drive into the time capsual but not let you back it up, what is the point in that!?
    so my question is can i back up the external hard drive with time machine, and if not how do i set up my home network so that all my computers can access the same files and time machine will back everything up?
    The TC for whatever it is promoted as,, is still a simple hard disk in a router. It was designed for laptops to use as a backup. A desktop can use a USB drive, faster cheaper and more reliable than a network drive but the laptops need a network wireless storage. Hence the TC. It is NOT nor was it ever designed to do the job you are trying to use it for.. it is not a NAS.. it has no internal backup.
    What is more Time Machine has no ability to backup network drives no matter what their format.
    So the solution is to either use a real backup software.. eg Carbon Copy Cloner which can do far more than TM can or ever will. It is around $40 so hardly expensive. But since the TC was never designed for it, this will be slow.. and the next question is where are you going to back to. Using the TC as backup location for your files is less than great. Primarily because all your files are still on the same device albeit on different disk. It is also because mixing data and TM backups is not so great. The TC cannot be partitioned although you can alleviate some of the issues..
    See this info.
    Q3 here http://pondini.org/TM/Time_Capsule.html
    Let me go back to the question.
    so my question is can i back up the external hard drive with time machine, and if not how do i set up my home network so that all my computers can access the same files and time machine will back everything up?
    Fundamentally the TC is the wrong place to do this.
    The right place is to plug the USB drive into the iMac.. since it is a desktop machine and you are probably not lugging it around. Simply share the USB drive to the network.
    The MBP can then access the USB drive, and it will be around twice the speed of networking to the same drive on the TC. TM on the iMac can then also backup the USB drive to the TC as part of the normal TM backups.
    The only thing is the iMac needs to be turned on to allow MBP access.

  • My iPod Touch is connected to my house internet and every few hours, it doesn't work so I have to shut it off and turn it back on which makes my iPod slower, how do I make it connect the whole time?

    My iPod Touch is connected to my house internet and every few hours, it doesn't work so I have to shut it off and turn it back on which makes my iPod slower, how do I make it connect the whole time?

    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    For Mac
    http://support.apple.com/kb/ts1591

  • I have trouble getting my new Apple TV 2 to work to the internet. I have an Imac with OsX 10.6.8 using a 3G modem to connect to the internet. I have a Time Capsule with Airport. I can't get the Apple TV to see my internet connection

    I have an Imac with OSX 10.6.8 dual intel core.
    Apple TV 2
    Timecapsule
    3G modem connected to iMac for internet access.
    I have tied to get Apple TV2 to see the inernet but it does not seem to see the inernet connection either via the Airport network or even if I connect it directly with a ethernet cable to the Timecapsule or the iMac.
    I have tired to set up Home Sharing but it doen't see the Itunes Store so no go.
    I don't have wired internet but it is probably something to do with using a 3G modem
    Any tips on how I can check if the TV coonect to internet and what to do about this problem?
    I was trying to connect my HD TV earlier using a WiFi USB modem but it could not see my iMac. Apple Support told me to buy an Apple TV but that is not helping as I can't see anything there either.
    Regards from Michael

    Thank you so much Paul_31 for your suggestions, HUGELY appreciate the effort
    I have reset the printing system, a few times for good measure but nadda.
    I have also looked at getting the software from the Apple site after seeing that with Snow Leopard you should let the operating system lead the install not the manufacteurers software as it is most likely out of date.  I too found it wasn't there so I uninstalled the software got up the CLX_3300 series stuff then went from there with the USB cable.  It apparently hasn't worked either
    Unfortunately now after using the print utility to scan for a while that has now gone again on the last restart of the Mac.  I am so completely clueless
    The box says the printer is compatible, the place of purchase said it was compatible, the Samsung site says it is compatible.
    I think it's the set up of my Mac? Our maybe a glitch in the network settings?
    Thanks again

  • I need to share a file with sec.(windows based). She uses it all the time. I need to just download updated version every few days. I have an old airport extreme and was hoping to attach an external drive. Will this work?

    I need to download an updated version of a file every few days to use. My secretary  works on the file all the time. I thought i could use my old airport extreme and attach an external HD and set up a network to do just this. At work we alll use pc's. How can i make this work? At the moment we use usb stick to transfer which is getting to be a bit of a pain as the file grows every week. Presently 5GB.

    I thought i could use my old airport extreme and attach an external HD and set up a network to do just this.
    Yes, you can use either the 802.11g or 802.11n AirPort Extreme Base Station (AEBS) to attach an external USB HDD for file sharing. Either AEBS model would allow you to share out this HDD to either Macs or PCs. From the PC, the shared HDD would appear as a network drive which you can map via Windows Explorer.

  • HT4356 I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Read through this for information about Airprint printers and how to use them:
    http://support.apple.com/kb/ht4356

  • I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

    I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • I bought an Apple Airport and the light is flashing a yellow light! I did this because I live in a basement and the modem is in the first floor. I followed the instruction manual and the Airport is not working still. how can I make my Airport work?

    How can I make the Airport work?

    If there is a modem and not a router on the first floor, then the only possible way to get it to work would be an Ethernet cable connection between the modem and the AirPort Express device.
    I think you need to describe your situation in more detail.

Maybe you are looking for