Will alerts work if adapter fails?

I want to send an alert for any technical problem
will it also work if the adapter has an error?

Hi!
I didn't test it, but in the Alert Configuration in RWB there is an option "Adapter Engine" for "Where did the error occur?" question (and you can choose an adapter type).
So I suppose that the answer for your question is yes.
Regards,
Andrzej

Similar Messages

  • How to send alert when receiver JMS adapter fails? Please help!

    Hi experts,
       I have the following Asynchronous scenario:
       SAP R/3 -
    >IDOC----->XI>JMS--->BizTalk.
       I am sending IDOC from a given SAP R/3 system to XI. XI then sends the same to BizTalk via JMS adapter. In SXMB_MONI the message is successfully processed as it shows checked flag. But if I see the JMS communication channel status in runtime workbench then there it shows error saying JMS queue user id or password not found.
    How to send this JMS adapter error as alert?
    I also tried configuring alert rule in runtime workbench but still it does not trigger any error.
    I have also verified the alert category and everything is fine with that.
    What could be the problem? How can I send an alert when an Async adapter fails?
    Thanks & Regards,
    Gopal

    Hi! GOPAL,
    Once make sure whther all the below mentioned steps are configured correctly or not ok
    1: First make sure whether you are working on SAP XI or PI 7.1
               a) If XI you need to create Alerts (ALert Category) in CCMS ABAP stack in the
                        Tcode. ALRTCATDEF
               b) Open the alert category/classification definition environment (transaction ALRTCATDEF).
         ensure you are in change mode.
               c) In the group box with the alert classifications, right-click All classifications to open the   
                    context menu, and choose Create.
               d) Under Classification, enter a name for the classification.
               e) Under Description, enter a description of the classification.
               f)  Save your entries.
               g) Then go to RWB-->Go to ALERT Configuation and ADD the RULES to your alert category gor 
         which created there in the abap stack.
    Note Suppose if you want those ALERTS to come to your MAIL then again go to ABAP STACK and go to Tcode.  ALRTCATDEF and select your alert category press FIxed Recepients and there give your SAP XI ID's then  u can see those alerts in RWB-->ALERT INBOX
    Suppoe if you want those to mail then ask the basis team to link your company mail or personal mail ID to your SAP ID.
    2. Supppose if you are working on PI 7.1 Server.
         Only difference is creating Alert Category...Here you can create your ALERT Classification I mean   
         alert caltegory in the ESR (Enterprise Service Repository )
         Software Component >S CVersion>NameSpace-->Alert Category.
         You can configure how u configure there in abap stack such as long and short text every thing 
          except Fixed Receipients you need to give that recepients there only in ABAP STACK.
          what ever ALERT CATEGORY you are creating will reflect there in the ABAP STACK
         even you can Use these alerts Category in BPM --> CONTROL STEP -->Configure here in this step
    You can also reach alerts like this.
    NOTE  Most Important point is You can also view your mails or Alerts in the T Code:: SOST.
    Regards:
    Amar Srinivas ELi

  • Apple DVI to Video Adapter on PC???? WILL IT WORK?

    Will the Apple DVI to Video Adapter work on PC's as well as Apple? I own a mac but the computer I need to convert on is an older PC with a DVI port on back. Will it work? It's just an adaptor right? It cn't be built to ONLY work on mac...theres no software in that little thing.
    HELP!!! before I buy

    No, it won't work with a PC. It requires the video card support the adapter, and since it was made for Apple cards, chances are the PC one won't. You might be lucky, but I doubt it.

  • HT1665 I just purchassed a Lightning adapter for my iPhone 5.  My car came with the normal iphone 4 connector.  I have a protective cover on my phone but now the connector will not work as the lightning connecting tong is not long enough to make contact.

    Lightning adapter will not work with iPhone 5 protective cover

    Your case designer should have done their homework .
    They would have full details of the iPhone and its accessories
    assuming they are a developer status

  • Mini DisplayPort to DVI + DVI to VGA Display Adapter, will it work?

    Hi,
    I have a MBP, and I have just purchased an apple Mini DisplayPort to DVI adapter.
    I want to connect it to a VGA port.
    Can I buy an Apple DVI to VGA Display Adapter and connect it to the connector above.
    Will that work? Any one with experience who could advise me on that?
    Thanks.

    This does not work, because the Mini DisplayPort to DVI adapter has a DVI-D port that transmits only digital signals. VGA uses analog signals.

  • Will an Infra-Red Adapter work with a macbook pro retina display so I can use the apple TV remote for presentations?

    I have always used the apple TV remote for my presentations.  I bought a retina display last year for the betterment of my presentations and now I have to stand near my computer and hit a button to change my slides where as before I used my remote.  Will a infra-red adapter work with the apple TV remote in the macbook pro retina display?  Love my computer, but very disappointed not to have a remote for presentations that does not need the internet.  Does anyone have any ideas?

    Yes, I used that and it works great if you have wireless connection.  Im looking for  a remote that worked like the apple TV remote.  My questions is, "Is there a USB infra-red remote that works with mac.  I have found this one: Keyspan EZ1 easy presenter.  It claims with works with PC and Mac and the reviews are good.  Does anyone know anything about it or if it works with retina display macs?

  • Lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

    lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

    Reh... Doesn't work on my 2012 Mac mini. A function key set in Sys Prefs worked in Leopard and Lion on my MB but I cannot get any key to work using SysPref Dictation & Speech. It is befuddling and now I have to go to Edit-Speech to turn on and turn off speech to selected text.
    I have used Macs and Apple 2es since cave man days and Apple is becoming so befuddling I am wondering if there is even an advantage to it over Windows XP. I spent a lot on this little box, it looks good (the first one had to be exchanged as it wouldn't link to my keyboard ???) but Apple intuitive does no longer seem meaningful.
    If speech to text no longer is accessible by short cuts using Fkeys, why bother to have it in Syst Prefs?
    Apple is losing its way. The pleasure is gone and no one at Apple seems to care.

  • Please help! Itunes fails to open on my macbook pro. I have remove itunes and reinstalled it and it still will not work!, Please help! Itunes fails to open on my macbook pro. I have remove itunes and reinstalled it and it still will not work!

    Please help! Itunes fails to open on my macbook pro. I have removed itunes and reinstalled it and it still will not work!

    Try removing the Genius database.  In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

  • Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter?

    Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter? I like to have two monitors and currently using an Cinema Display from 2005. Thanks

    If your computer does not have Thunderbolt you cannot use a Thunderbolt display.  There are no adapters that will help.

  • HT3231 transfer files to my new iMac system 10.8.3, 9 pin firewire. Apple sold me FireWire 9-6 with a Thunderbolt to FireWire Adapter.  This will not work, do i need a different cable?

    I have a G4 with system 10.4.11 and a 6 pin firewire trying to transfer files to my new iMac system 10.8.3, 9 pin firewire. Apple sold me FireWire 9-6 with a Thunderbolt to FireWire Adapter.  This will not work, do i need a different cable?

    Apple Thunderbolt to FireWire Adapter
    Then it sounds like the FW800 to 400 adapter just gets in the way. You don't have FW800 case? on my MDD G4 I added and used FW800 controller and cases from OWC and Sonnet.
    http://www.macsales.com/firewire

  • Executable run-time error: "Failed to process adress of Labview Program. Occurences will not work."

    When I run my VI it works fine. However, when I create it into an executable and try to run the exe, it gives me an error, "Failed to process adress of Labview Program. Occurences will not work." Why?

    I am using Labview 7.0. I have attached a screen shot and the code. thanks for checking it out and let me know if you need any more info.
    Attachments:
    Labview_Error.bmp ‏2305 KB
    Main.vi ‏230 KB
    PAIN_Generator.exe ‏2186 KB

  • Will the lightning USB adapter work with regular USB jump drives?

    Will the lightning USB adapter work with regular USB jump drives?

    Not really.
    Technically, with some USB drives (I've had a 50% success rate) you can import photos or videos off the drive - thi those photos or video follow a very strict naming convention.
    But you cannot import anything but photos or video and there is zero support to write off the iPad to the flash drive....so while it technically may work, it's so limited to effectively not work.

  • Have a canon dc310 camcorder that uses mini dvd's. How can I get my new Imac to read these dvd's?Camcorder unable to connect to computer. Will a mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with a mac?

    I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer.  How can I get my new Imac to read these dvd's?  Will the mini dvd adapter work or do I need to purchase an external dvd rom device?  Which device works well with the Mac?  Do I need anything else to get the dvd material onto my mac?  Thanks!!

    No DV port in camcorder.  Just a yellow AV port/hole.  I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's.  Can I use this with a Mac?  Could I connect a dvd player to the Canopus and transfer the disks onto my Mac?  Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way?  Thanks again!

  • MyDAQ fails Self-Test and will not work with any software

    I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
    Trying to self-test or reset the device in MAX gives these errors:
    -The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
    -There was a problem resetting the device. Error code: 80040383.
    It also gives this error when trying to use the Elvis Oscilloscope:
    -Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1 
    Possible reason(s):
    NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
    I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked  NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
    Attachments:
    ni_support.zip ‏341 KB

    Hi chaka123,
    I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
    To answer your questions:
    Does the Test Panels work at all?
    I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
    Have you tried to delete the device in MAX?
    Once again, I cannot because it shows up as Flash Firmware Updater.
    Which is the color of the icon on the left side of “myDAQ1”?
    It was green before the uninstall. Now it shows the USB symbol.
    I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device." 
    What folder can I manually point Device Manager to in order to load the correct driver?
    Attachments:
    devicemanager.PNG ‏40 KB

  • Alerts in the adapter.

    Hi All,
                 In one of my scenarios, I am triggering an Idoc from ECC and processing the message in XI and sending it to web based system using SOAP protocol. For this scenario I have used SOAP adapter at the receiver end. when ever the web based system is not able to take the load the message adapter will try to post the message for certain times and fails after the limit. This failure error would only be available in the communication channel monitoring. But unfortunately due to memory concerns in the runtime we could not keep these  messages for longer duration in the persistence. So I thought of raising an alert when ever the adapter fails to post the message.
               I need to raise an alert with the Idoc number (note: Idoc number is present only in the sender messge as the target message doesn't have a field to map it) at the adapter end. Please let me know  different ways of doing it with out BPM.
    I appreciate if you could not provide me the links.
    Thank you.
    Regards,
    Vishnu.

    Hi Vijay,
    Thanks for the reply. I have created the alert rule for the adapter engine already. At least could we get any field from the target payload in the target message?
    Regards,
    Vishnu.

Maybe you are looking for