Will an epson photo 2400 scanner work with OSX 10.7?

Will an epson photo 2400 scanner work with OSX 10.7?
If so where do I get the drivers/software to run it?
I have used it with aquire, but only in flat bed scanning.
I am not able to use the film/slide mode anymore because the software that came with it is for 32 bit macine code.
Any ideas?

I realize this isn't a direct answer to your question, but I have an Epson Perfection 1670 flatbed scanner.  I plugged it into a USB port after installing Lion, and it works fine with both the Image Capture and Preview applications.  ("FIne", for me - I don't have a need for slide/transparancy scanning.  Image Capture recognizes the scanner can do it, giving two modes for transparancy scanning, but in a quick and dirty test a minute ago it didn't seem to work.  Since I don't need the capability, I'm not going to struggle with it to see what I've done wrong.)
Good luck
srb

Similar Messages

  • Will a CanoScan LIDE 210 scanner work with OSX 10.11 beta?

    I am testing OSX 10.11 Beta release and happen to need a scanner.  I am asking to find out if the CanoScan Lide 210 will work with this version of OSX?

    Any luck? I upgraded to OSX 10.11 and sometimes it works sometimes it doesnt.

  • Epson Perfection 2400 Scanner issue with Epson Print Driver 2.4.1 Update

    After the Epson Print Driver 2.4.1 update, my scanner quit working with Image
    Capture, which hangs during the overview scan. The scanner makes a pass over
    the document, but Image Capture just sits for a while saying "Overview Scan..."
    and then fails with a generic error message.
    I tried the suggestion in [11993273|http://discussions.apple.com/thread.jspa?messageID=11993273&#11993273 ], but that did not work for me.
    Any other ideas?

    Thank's for the suggestion, but no help.
    It is not straight-forward to uninstall the driver because Apple installer
    does not offer an uninstall option. I resorted to
    sudo find /Library -iname "epson" -print -exec mv {} ~/Desktop/epson \;
    in the terminal. Reboot. Ran EPSONPrinterDrivers.pkg. Ran Disk Utility's
    Repair Permissions. Reboot. Added scanner back in the System Preferences.
    Opened Image Capture, the overview scan started and a few minutes later
    *Scanner reported and error*
    An error occured during scanning.

  • Will my printer and scanner work with the new intel mac?

    My first post.. so I hope i am in the right place! (was in wrong place last attempt!)
    I want to buy the new intel...but I would like to know for sure if it will work with my scanner and printer.
    Printer is Epson Stylus Photo 2100 and the scanner is Microtek ScanMaker 4900.
    I have emailed both Epson and Microtek... phoned Epson.. and I still do not know the answer.
    The responses were
    "At this point in time with have been given no information on whether our printer drivers will work or not....".
    "Yes it will work with OSX 10.4"
    "As you know this new intel chip has just hit the market. This particular configuration is in the alpha stage of testing. As of now there has not been any reports or customer correspondence of any concerns."
    I have been scanning these posts and it seems that only the operating system is relevant? If anyone could help I would appreciate it. I am finally able to replace my old, old, well loved G4 but am worried I will make the wrong decision.

    Thanks all for the helpful comments. I am getting closer to going out and buying the intel. As for the Canon printer... its not really an option for me, since the Epson cost me more than the computer will! But I will keep it in mind for the future. And do you think this applies to digital cameras as well Tomzo? I have been considering buying my first digital.. and thought the pentax might be best, since it apparently can use the lenses from my film camera.
    Thanks again all..I will keep checking the apple site list and the web sites as suggested by you.
    Power Mac G4 (AGP graphics)   Mac OS X (10.4.4)  

  • Problem with Epson Photo 3170 Scanner

    Hi,
    I bought a new Apple and installed Mac OS X 10.6.8 and my epson photo 3170 scanner is not working.
    I read here that my scanner is supported -> http://support.apple.com/kb/HT3669#epson
    I did Software update and downloaded the latest version, but still doesnt work.
    I also installed Roseta, but i cant find the option in Photoshop (using control+i) it only gives me option for 32bit mode.
    any ideas?
    thanks ;-)

    This is the latest update, not supporting 10.6.x, so i turned to apple, but didn't work either.
    TWAIN Driver and EPSON Scan Utility v2.77A
    Intel-based Macs with OS X (v10.5 - 10.5.x) compatible,
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=25021&prodoid=35836 301&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=22&y=13

  • Which home scanner works with windows 8. I have a N676U Cano Scan that will not with 8. Walt.

    Which home scanner works with windows 8? I have a N676U Cano Scan that will not with Windows 8. Is there a fix for this? Thanks: Walt.

    Hello Walt.
    Unfortunately, the CanoScan N676U is not compatible with Windows 8.
    For more information, please call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Will the HP LaserJet Pro P1102w Printer work with OSX 10.9.5?

    I am looking for an affordable LaserJet printer for home. I want to know if the HP LaserJet Pro P1102w will work with OSX 10.9.5. Their website only goes up to OSX 10.7 for compatible OSX systems.

    OS X- Printer and scanner software available for download

  • HT3290 Will my Sony Handycam DCR-SR68 work with I-Movie

    Will My Sony Handycam DCR-SR68 work with I-movie for downloading video? I was able to get the photos I had on it to download onto I-Photo, But I want the video to download also, so I can edit them and burn to a DVD. Please Help, this is driving me nuts!!!

    According to the iMovie Supported Cameras List, your camera should work with iMovie 11.
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    You would need to connect the camera via USB, and the camera would need to be plugged in to AC power (not batteries only). Then use FILE/IMPORT FROM CAMERA. The camera probably needs to be put in Playback mode, but some cameras need to be in PC Attach mode. Check your manual.

  • Will Office Web Apps Server 2013 work with SharePoint 2013 sites hosted in SP2010 compatibility mode?

    We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
    So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
    I found a similar query from March 2014 found here 
    http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281 
    Has there been an update released to resolve this
    Cheers D

    Hi  ,
    According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
    For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

    need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

    Try with the latest Apple driver package for Canon (released 15th Feb):
    http://support.apple.com/kb/DL899
    This solved my problem with the printing.

  • Will a CP1518ni color laser printer work with airprint with my iPad?

    will a CP1518ni color laser printer work with airprint with my iPad?

    Hi Ijergen,
    Yes you can use AirPrint as long as the printer is on the same network as the iPad.
    You can also try Google cloud, I will be giving you links below on how to go about it.
    AirPrint
    http://www.apple.com/support/ipad/assistant/airprint/
    Cloud print
    http://androidadvices.com/how-to-print-from-androi?d-phone-with-google-cloud-print/
    http://www.google.com/support/cloudprint/
    Thanks
    Josh.C
    Click on the BLUE KUDOS button on the left to say "Thanks"
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Hp scanner software Scan 3 does not work with osx yosemite

    The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software? 

    Hello @ringie,
    Welcome to the HP forums.
    I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
    I would like to help.
    There is currently no updated software.
    Try the following work around.
    Scanning in OS X v10.10 Yosemite without HP Software
    Hope this helps get you scanning.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Will Adobe Acrobat 8.0 Standard Work With Adobe Reader 8.2.4?

    Hello,
    I have a question, but haven't found an answer to this yet.
    Can anyone tell me please:  Will Adobe Acrobat 8.0 Standard work with Adobe Reader 8.2.4?
    I had Adobe Acrobat 6.0 Standard on my computer & it was working with Adobe Reader 8, but don't remember what the version it was.
    I was using Adobe Acrobat 6.0 Standard to scan very old family pictures & documents & I realize that this version of Acrobat is outdated.
    To make a long story short, my computer had crashed, so we built another computer & just replaced the hard drive.  When I went to Adobe, I had to download the newer version of Reader 9.0 & it didn't work with Acrobat 6.0., so I removed Adobe Reader 9 & I found Adobe Reader 8.0 & have downloaded the patches, so now I have Adobe Reader 8.2.4 back on board.
    Thank you.

    Adobe doesn't recommend any version of Reader with any version of Acrobat on Windows. It will cause problems. It just is a matter of how and when. The problem has to do with shared resources causing conflicts. If you have Acrobat 8, you can update it to Acrobat 8.2.4. You must apply the updates sequentially.
    http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows

  • Will my LED 27 Cinema Display work with the new Mac Pro?

    Will my LED 27 Cinema Display work with the new Mac Pro?

    Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

Maybe you are looking for

  • My computer was taken over by a bunch of pups I opened, and I removed them, but lost the search bar on my Mozilla start page, how do I retrieve it?

    Can't seem to retrieve the search bar that should be located beside the address bar. Tried for several hours, but can't seem to find the right information. I don't want to reset Firefox because I have too many customs set. I used options and put the

  • Issue with Launch of the GRC 10.0 Data Export Application

    We are in process of upgrading our AC system from 5.3 to 10.0. As a prerequisite, we have upgrade our AC 5.3 system SP from SP9 to SP15. After this, we are trying to access the Datamigration tool from link: http://<hostname>:5<instance>00/webdynpro/d

  • Problem with F110 posting

    Hi i m trying to post using F110 I have entered parameters and run the "PAYMENT PROPOSAL" When i display the Payment proposal log....its giving an error "No suitable bank can be selected for company code 1234 pmnt mthd C in USD No permitted payment m

  • Entries from database table

    Hi all, I need to fetch the first record from a data base table. I don't have any primary keys. Infact without using any primary keys i just need to select the first records from the table. I have used select single and select up to 1 rows (I should

  • Customize / Override BPM in-build actions like reassign

    We have a requirement to override the reassign action in BPM workspace to perform certain checks before allocate to person. Basically when a supervisor is reassigning a task, he can only reassign the task to a member who work under him and also has s