Will an ibooks author 1.1 file work in ibooks author 2 without glitches?

Just finished a 75-page iBook, ready for publishing but wonder if I should update to Ibooks author 2 first. OR will there be problems?

Hi KT...on a related issue: I noticed that in Author2 when you go to Publish, there is a different routine. In Author1, when you select Publish, the program creates the three files for your .itmsp package: title.ibooks, cover image.jpg and the metadata.xml then asks if you want to create an account to upload. Author2 requires you to have set up your publishing account (which I have not done yet). My question is simply how do I backup current work in Author2 if I cannot override what I have saved already? Also (and this may be dumb), I don't seem to be able to open the .itmsp package with Author. What file is Author actually working on as I am creating and editing a book? And how do I find this file so I can back it up? As usual...thanks in advance.

Similar Messages

Will Canon 5d Mark III Raw files work with Lightroom 3

I have just tried to upload Raw files from a Canon 5d Mark III to Lightroom 3. The file were not recognised. I believe there were some update issues but my Lightroom 3 is updated. Do I need to get Lightroom 4? I need to know urgently as I have a shoot tomorrow and will go back to my Mrk II if I can't get an update for Lightroom 3.
Message title was edited by: Brett N

LR3 DOES NOT support Canon 5D3, 1Dx, Nikon D800 or Nikon D4.
Newer cameras wont work in it, and require LR4 for RAW processing (Tethering in LR4 STILL is not supported)
However,
LR4 is massively buggy, and slow to a point where it is practically unuseable for anything other than a handful of images to edit.
Also, LR4 will not tether to the new cameras (for that, try ANY of the competing professional software, Aperture, Capture One - They work just fine)
You can, convert your 5D3 files to DMG, and then open them in LR3 that way, or you can get LR4 and deal with it's massively awful slow issues that Adobe has still not resolved 5.5 months after launch, or you can use other software.
Those are your options.

Installer will not install .pkg and .mpkg files.

Help!
My specs:
Machine Name: Power Mac G4 (AGP graphics)
Machine Model: PowerMac3,1
CPU Type: PowerPC G4 (2.8)
Number Of CPUs: 1
CPU Speed: 400 MHz
L2 Cache (per CPU): 1 MB
Memory: 640 MB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
I lost my version of iTunes and attempted to re-install via free download off of Apple.com. Unfortunately, regardless of what version I attempt to install, my Installer will not run .pkg or .mpkg files. It bounces, then disappears without any results.
I do not have the Tiger disk - as my father gave me this computer a few years ago without it (as it was his old computer).
I am absolutely distraught without my iTunes and do not know what to do to rectify the situation with my Installer.
Can anyone help me please???

Try moving:
Home (or your user name) > Library > Preferences > com.apple.installer.plist
to the desktop and restart your computer. This file saves the settings for that service and may be come corrupt. Removing it from the Preferences folder will result in a new file being created with default settings. If this helps you can trash the file but you may need to reset other things covered by that preference. If it doesn't help you can replace the newly created file with the old one and restart to regain the old settings.
If that doesn't work you will probably have to copy Installer from your backup drive. You absolutely must have a backup, especially if you are going to try to survive without the Tiger discs (which are, strictly speaking, a legal requirement if you want to run Tiger).

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

I just got my mac a month ago so go easy on me but I was just working with the pages that was already on it, and then today I know it updated, and now I am unable to open a lot of my documents!:( Idk what you mean by the icloud version lol sorry! As for the version, when I open pages from my apps and click 'about' it says version 5.1? And when I open the document it just goes grey and kind of blinks and doesnt open? No error message or any indication of why it will not open now when I for sure have opened it in the past! Andddd for the OS X I think it is 10.9.1 ??

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

Will project archive out of elements 13 work in premiere pro cc or should I output to file? Thanks

Will project archive out of elements 13 work in premiere pro cc or should I output to file? Thanks

Hi Phillip,
You should be able to open a Premiere Elements Project in Premiere Pro CC (Windows only), however, I tried it and found the results were not very acceptable for use as a backup. Can you try it first?
Thanks,
Kevin

Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? A

Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? And if not, is Adobe developing plugins for these cameras?

Not sure what plugins you mean, Hornet - Lr doesn't rely on plugins to read new cameras.
If you mean the Adobe Camera Raw (ACR) plugin - that's for Photoshop, not Lightroom. Lr has the same functionality as ACR, but it's hard-coded into the program, so if you're looking for support for a new camera, you need to wait for a new version of Lr.
And nobody here can say when Lr support for a given camera will happen.
Hopefully someone with a Merrill will be able to chime in about whether its files work with the current Lr.

How can I create an icon that when clicked will open and maximize an image file?

How do I create a icon that when clicked will open and maximize an image file? I have tried to use the simple image widget with maximize upon tap/click - however I am can only size the image really small and put on the page. I'd prefer to have a graphic that when clicked it simply opens up the image. This is for a very simple question/answer book. The user is suppose to look at a picture and locate something. I want to put an 'Answer' graphic on the image and then the user can click the 'answer' graphic and it will open up the picture with the answer identified.
Is this possible?

Have yiu tried the PopOver widget? You can drop an image into it, maximise the image and the widgets window...But, you cannot get it full screen.
With iBooks Author, you either learn to use what is available within the app, or look online for third party widgets to purchase which suit your project.

[svn] 670: -major update to the mpl packaging target - this will now package up the correct files that are mpl

Revision: 670
Author: [email protected]
Date: 2008-02-26 18:14:40 -0800 (Tue, 26 Feb 2008)
Log Message:
-major update to the mpl packaging target - this will now package up the correct files that are mpl
-this target is not called within this build script. to build this pkg use: ant mpl-package
Modified Paths:
flex/sdk/branches/3.0.x/build.xml

One small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G

Numbers 3.0.1 - Can't open file "Work.numbers"

Hello, all Community!
Here's a iWork Numbers file, edited and successful saved yesterday to local folder, named Work.numbers.
Today this file not opening anymore. Number's says: "Can't open file ..." And just one button "OK".
In system log here's next lines:
iTrancemind # tail -F /var/log/system.log | grep Numbers
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 3022
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 3019
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 468721
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 3022
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Assertion failure #1: __97-[TSPObjectContext readWithReadCoordinator:finalizeHandlerQueue:rootObject:error:readCompletion:]_block_invoke TSPObjectContext.mm:1129 Could not read document object with error: Error Domain=com.apple.iWork.TSPersistence Code=1 "Произошла ошибка при чтении документа." UserInfo=0x600001069600 {NSLocalizedDescription=Произошла ошибка при чтении документа., TSULocalizedErrorAlertTitle=Произошла ошибка при чтении документа.}
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Assertion failure #2: -[TSADocumentRoot dealloc] TSADocumentRoot.mm:246 Someone neglected to call -willClose on the document before releasing it.
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Assertion failure #3: -[TSADocumentRoot dealloc] TSADocumentRoot.mm:246 Someone neglected to call -willClose on the document before releasing it.
What I done to try resolve this problem:
1. Checked permissions and repaired.
2. Tried to open file in iCloud web-editor - no result. iCloud says that it can't open this spreadsheet.
3. Tried to convert file via some online file type converters to xls document (i will not put link here). Converter says that I have wrong file format.
Also I tried to open file in some other programs. No luck.
That's all.
File Work.numbers has been closed correctly and was no errors. Unfortunately, we have no any backup copy of this file anywhere. I know, this is stupid, but question now: How can I repair this document? Is any repair tools for iWork files?
The file seems like has right structure.
iTrancemind # ls -la Work.numbers/
total 4776
drwxr-xr-x@ 8 max staff      272 30 дек 16:44 .
drwx------+ 19 max staff      646 30 дек 17:53 ..
drwxr-xr-x@ 2 max staff       68 30 дек 00:28 Data
-rw-rw-rw-@ 1 max staff 2306978 30 дек 00:28 Index.zip
drwxr-xr-x   5 max staff      170 30 дек 14:47 Metadata
-rw-r--r--@ 1 max staff     1690 30 дек 00:31 preview-micro.jpg
-rw-r--r--@ 1 max staff    13602 30 дек 00:31 preview-web.jpg
-rw-r--r--@ 1 max staff   112911 30 дек 00:31 preview.jpg
Unzipping Index.zip is passing without errors. It has many "iwa" files with binnary content and I can't get data from it. But, data in that file is very important for one person.
Could anybody help me to resolve my problem to restore Numbers document?

Hi rabg,
I am using OS X 10.8 on a Mac. This may be different if you are using iOS.
Does Numbers'09 still exist in your Applications folder? Maybe inside a new folder? Perhaps you could use Numbers'09 to open your documents.
Regards,
Ian.

File works in Encore 1.0.1 but gives problems in Encore 2.0

Try downloading this file
http://www.ecs.homechoice.co.uk/Adobe_test.mpg
It's a recording of a trailer off BBC1 and is typical of the problems I am experiencing with Adobe Enmcore 2.0
If you play back teh above file on Windows Media player it looks fine. If you impotr the file into Encore 1.0 it looks fine. But if you impotr it into Encore 2.0 it exhibits problems at the following timecodes (the problems are visible just viewing the time line, you don't have to burn the disk).
0:0:04:04 - pixellation
0:0:11:20 - repeated frame
0:0:15:04 - pixellation
0:0:15:05 - pixellation
0:0:15:19 - pixellation
Do other people have the same problem at the same timecodes?
Would be interested to hear. The first response from Adobe "level 2" Support was not encouraging on this.
I just want to know why the file works fine in 1.0 but not in 2.0!
best
ed

> I find it hard to accept the notion that the Topfield recordings are to blame when Encore 1.0 creates DVDs from these files with no problems whatsoever.
For whatever reason, the new recordings and Encore 2.0 don't play nice together. I doubt that you can get the BBC or Topfield to change the way that they broadcast or record the video data. Any modifications to Encore that might eliminate the problems you are seeing will have to wait for an update or an upgrade to the program, if they ever appear at all.
I doubt that Adobe is going to do much research or troubleshooting to discover why Encore doesn't like PVR files from your (or anyone else's) Topfield or [insert your brand here] recorder. It wasn't designed to work in that arena. There are much cheaper, much more forgiving MPEG and DVD creation programs out there that will let you edit out commercials or archive your favorite shows.
Your solution is simple: Use Encore 1.0 for your Topfield recordings.

My PS CS6 with camera raw 8.4 will not open Nikon D4s NEF files-

I have just upgraded from CS 5.1 to CS6. The initial installation went smoothly and everything seems to work as it should. The CR was version 7. I then installed all of the updates using the Check Updates option from the menu. That went fine also and the CR was updated to version 8.4.0.199 as reported under the About Plug ins. It will still open my old nef files (Nikon D700) but it will not open files from the D4s, suggesting that I upgrade camera raw. Now I have also downloaded and installed the latest DNG converter version 8.4. That will show and convert the older D700 files but will not even show the D4s files In the same folder. I uninstalled CS6 according to the uninstall instructions and then deleted the folder (Plug ins?) from the Common/Adobe location as instructed, and then reinstalled. No improvement resulted. This is on windows 7 64 bit system with all updates.

Glad to be of help. But I'm curious (not critical of what you are doing) to know why so many people like to use Nikon Transfer to transfer their files to the computer. It is still necessary to import them into Lightroom. And, from my perspective, it seems simpler and maybe even a little quicker to use the Lightroom import dialog. I have Nikon cameras, and have never even installed the Nikon Transfer utility. What is so unique about it?

Not all files work in log and transfer

Hoping maybe someone has found a fix to this issue...
When editing an HDV project not all my .m2t files (all in the same folder) want to transfer using Log and Transfer. Most of the files will transfer correctly but sometimes it skips a file and puts a red exclamation mark in the status. Not sure why most files work and a few don't when they are all from the same folder and from the same shoot. The files will open fine in other 3rd party apps so the files are ok.
Thanks in advance for any help!
Mike

Mike Cole1 wrote:
Not sure why most files work and a few don't when they are all from the same folder and from the same shoot. The files will open fine in other 3rd party apps so the files are ok.
FCP may be a bit more discriminating on the file structure or header integrity, dunno, never shot HDV myself but we've seen similar posts for years. Try copying the files to your drive first and then ingesting.
Side note, ust because other apps can open the files doesn't mean they are intact or useable. You don't mention what these apps are but if you can export form them, do that and then ingest the new file which might have all of its glitches reparied to suit FCP.
bogiesan

HT2500 Using Mail in System X 5.8 It will not accept attachments (photos, pdf files)

Using Mail in System X 5.8 It will not accept attachments (photos, pdf files) to send. It was working just fine and after some period of non-use it just stopped accepting attachments to send. The system is all up to date. And, I have the same problem on two different Imacs.

I had exactly the same problem as arthur1234. I followed his own suggested fix in his post of 10/12/2012 at 9:31 AM.
His fix worked perfectly. Attachments are now being sent and received as they have been for the last 10 years or so.

Do template files work for those not editing in dreamweaver?

Hi!
Do dreamweaver .dwt template files work for people who are not making changes with dreamweaver?
Thanks!

Better make that a *NO*. Allowing people to edit Template controlled pages outside of DW will be a catastrophe, unless they are very familiar with DW Templates and how they work.

Will an ibooks author 1.1 file work in ibooks author 2 without glitches?

Similar Messages

Maybe you are looking for