Will an old iPod "firewire" charger work for my iPad

I have an old Firewire wall charger that came with my first iPod (wht 20gb). It is a 12 watt .64Amp output.
Will this work with my iPad. The iPad comes with a 10 watt charger.
Will the extra wattage harm the iPad?

When the current goes through the wire to the dock connection on the edge of the ipad, the devices does not "know" the shape or configuration of the connection to power at the other end. Clearly, the ipad does not interface with a firewire DATA port. However, there is an adapter cable for ipad devices with three ends: dock (to device); USB (to computer for data); FireWire (to AC wall adapter for power).
It seems to me that the 12V 1.0A output of the old wall adapter should be able to charge the ipad. I do not have the three legged cable, but do have a ipod power adapter with FireWire only connection. Has anybody tried this alternative to the 10V output wall adapter intended for the ipad?

Similar Messages

  • HT201274 If i erase all my contents and settings will my old apple ID go away for my ipad?  This is what I want to happen.

    HOw do i get rid od my old apple ID.  I've tried all the suggestions people have offered, but they do no work.  How about me erasing all my content and settings will that get rid of my old apple ID

    Yes, Settings>General>Reset> Erase all Contet and Settings

  • Will a ipod nano charger work with a new ipod touch?

    will a ipod nano charger work with a new ipod touch?

    If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

  • Iphone/ipad/ipod charger wire wont work for iphone or ipod but does work for ipad very strange

    guys this is so odd and pointless but for some reason my charger wont let my iphone charge or ipod but it works for iphone. iphone running ios 7 same with ipad. any solutions?

    Hello there, Kareem77.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    If the issue persists, the first article also refers to this:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • If I trade-in my old iPod nano in-store for the discount, will it apply to something that is already on sale?

    I want to trade in my old iPod nano (2nd gen) for the in-store discount, and then buy a new iPod touch. If the Touch is already on sale, will the trade-in discount apply ON TOP of the sale price?

    I see no disclaimer on the Apple site that says you can't combine today's sale price with other other discounts. However, you have to ask Apple for sure.

  • Will the ipod docking station work for the iphone5?

    will the ipod docking station work for the iphone5?

    Which iPod is it?
    If it's the newest generation iPod dock, then it probably won't as the new iPod is much thinner than the iPhone 5. It also depends on the shape of the dock (if it has a thin space for the iPod device). Do you think you could add a picture. I will give a more direct suggestion of you can.
    Sandy-Wood

  • I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?

    I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?

    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                                        
      - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Ipod touch charger work with a Kindle 3?

    Will my Ipod touch charger work with a Kindle 3 3G?

    If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

  • Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.

    Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.

    Yes
    Put all the music on one computer, make sure it is authorized for all accounts, sync.

  • I boug ht an ipod touch it worked for a while then it went in to dfu mode and said to plug in to itunes and i did but that didnt do anything and it wouldnt show up on itunes ethier

    i bought an ipod touch it worked for a while then it went in to dfu mode and said to plug in to itunes and i did but that didnt do anything and it wouldnt show up on itunes ethier plz help

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Will an iPhones 4s wall charger work with a 5s if I buy the new cord?

    Will an iPhones 4s wall charger work with a 5s if I buy the new cord?

    You're welcome

  • Premiere elements12 will not accept ADOBE ID that worked for photoshop elements 12, help

    premiere elements will not accept ADOBE ID that worked for photoshop elemets 12

    katmama
    From one of your prior threads, you appear to be working in Windows 8.1 64 bit with your Premiere Elements 12.
    Where are you when you say that Premiere Elements 12 will not accept your Adobe ID - are you at the Sign In dialog step of the end of the
    installation? Whatever the location, what is being rejected or not recognized specifically - can you tell if it is the Adobe ID or password?
    Are you working with antivirus and firewall(s) disabled?
    Please check out the following troubleshooting steps and let us know if any of them worked for you
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
    Do you have more than one Adobe ID with Password Account?
    We will be watching for further developments and will have more comments based on your reply.
    Thank you.
    ATR

  • If i have iworks for my mac will it work for my ipad 2

    do i have to buy the app for the ipad or there a way for it to work on both devices?

    No. You will need to buy the iOS versions for your iPad.

  • Will iPhone battery charger work with my iPad 2 ?

    Will iPhone battery charger work with my iPad 2 ?

    It does work but it's not recommended:
    iPhone charger is 5W
    iPad needs 10W
    So, yes you can charge an iPad but the iPhone charger will get spoiled and the charging will be very slow.
    Hope this helps,
    Ricc

  • I have a new ipod touch and it says choose to set up as a new ipod touch or restore from a backup. If I restore from backup will my old ipod continue to be synced as before?

    I have a new ipod touch and it says choose to set up as a new ipod touch or restore from a backup. If I choose restore from a backup will my old ipod continue to maintain the ability to be synced on my same account?

    Yes. It will not effect your other iPod.
    However. change the name of the newer iPod if necessary to avoid confusion if the second one is named the same as the first
    iTunes: How to rename your device

Maybe you are looking for

  • File uploaded to wrong location

    I have some code to upload a file.However when I check the server the file is not in the userFiles/csv/ folder, but rather in side the userFiles/ folder. Any ideas what wrong with my code?

  • Hi how can i fetch the data from tree table

    Hi i am designing a UI in which i am creating a java tree table as on sun java site http://java.sun.com/products/jfc/tsc/articles/treetable2/index.html now i have to fetch the perticular column value on the mouse click.I have implemented mouse listen

  • REST API usign ajax

    Hello I am trying to make use of REST API using ajax, but its failing giving the error message: "NetworkError: 403 Forbidden - https://secure.eloqua.com/API/REST/1.0/data/contact/123" Below is the javascript code I am using: <script>     jQuery.ajax(

  • How to uninstall the magic mouse progam ?

    Hello , happy new year ! I got just a little question, i am on leopard and after a test of the magic mouse i would like to remove the magic mouse program, do you know what files i have to removed and where ? thanks! Cause now i got big trouble with m

  • Agilent Driver Causes LabVIEW to Blow Up and Stop

    I have started to use the AG6000A driver for LabVIEW. It seems to work fine until I do a "Text" search and only on specific drivers. When I search on the "Acquire Multiple Waveforms Example"for any text, the LabVIEW application ends suddenly causing