Will Aperture backup to a vault with daisy chained external hard drives

I am moving my Aperture library to a 6TB external drive. I want to back that up to a disaster drive consisting of 2 g-drives daisy chained, one 2TB and the other 4TB.
Will Aperture recognize the daisy chained drives as a single drive and backup the Aperture library to these drives as a single vault?

Caveat: answering your question requires one to make lots of assumptions, any one of which might change the answer. I do not know if Aperture would do so or not but personally I would not recommend it.
Note that daisy-chaining is simply a method of connecting drives; the drives themselves each remain fully independent. One needs to build a RAID array to combine independent volumes, and that is usually best done with fairly identical drives rather than with a 4TB and a 2TB.
I strongly believe that unless one is a true mass-storage expert very large Managed-Originals Libraries should be avoided. IMO far preferable is to instead use Refererenced-Originals Libraries.
Databases invariably perform better in numerous ways when smaller.
-Allen

Similar Messages

Good Idea, Bad Idea: Daisy-chaining external hard drives

I'm about to buy a White Macbook (maxing out RAM) which has one Firewire 400 port.
I currently use a Firebox to record audio and I know that I will need an external hard drive. The consensus is that Firewire is far superior than USB 2.0 due to a stable transfer rate.
However, I'm wondering which is superior in this case- getting a Firewire 400 external hard drive (7200rpm of course) and daisy-chaining it, or getting a USB 2.0 hard drive?
I typically only record 2 tracks at a time with my Firebox, but I would prefer it if I could use it to its full capacity and record 6 if I wanted to. I assume that this will have a great effect on it when daisy-chained.
With my current machine (details listed below), I get messages all the time from Logic Pro telling me I'm overloading it or maxing it out or whatever. In buying a new machine, I strongly desire not to have these problems again, so any advice would be greatly appreciated.

I'm under the impression there isn't a laptop being currently produced that has two Firewire 400 slots and is capable of running Logic Pro. Apple's offering has two choices - 1 Firewire 400 slot in the White Macbook for $999, and 1 Firewire 800 slot in the Macbook Pro line, starting at $1999. It is absolutely horrific, I know, but I didn't design the current line.
Since the biggest advantages between the $1999 model and the $999 model have very little to do with audio editing, I decided against the extra grand for some fancy new toys.
Advantages of higher-end:
A) Better graphics card
B) 0.3 Ghz more processing power
C) multi-touch trackpad
D) environmentally friendly
E) possibility of installing a solid state drive- at 128 GB.
My current machine was upgraded once, but was quickly smited back to original specs by a power surge (seriously- all I lost were the upgrades). It has since then been a bit of a finicky computer. It freezes now and then, and the kernel errors are frustrating. Plus, it's noisy.
So yeah- I would totally take you up on the notion of upgrading my current machine first, but it's not really worth the trouble anymore.
I've also posted before and have been told that pretty much any Mac I buy now will be far superior than my current machine.
That being said, I suppose I ought to look into USB 2.0 external drives.
Does anyone have any suggestions? Advice for what to look for? If I could find one that is 9600rpms, will that make a difference or is 7600rpm pretty much the max for the 400mbs transfer speed? Any suggestions for external drives that use both Firewire and USB 2.0? Any other ideas in general?

Daisy chaining external hard drives and a video camera from a single firewire 800 port on my imac

I have only a single firewire 800 port on my imac and want to know if I can daisy chain two external hard drives and my video camera, please? If not is there another solution using USB 2?

Are the external HDs self powered or powered by the FW port? If they are self powered there should not be a problem. If they are port powered they may put a strain on the port's power output but I'n not positive on that.

Daisy Chaining External Hard Drives

How many self-powered, or powered HDs can be daisy chained to the TC's USB port? Will all of the external drives be available on the Mac? I have several HDs I routinely access for files and would like to do it wirelessly. I would also like to be able to backup those drives on the TC or other external.

There is no specific documentation (that I could find anyway) that state exactly how many devices can be daisy-chained to the Time Capsule. Although I would assume that the USB port on the Time Capsule is no different than the one on your Mac - which would mean up to 127 devices per host controller or USB port. Although I don't have any personal experience connecting more than one (4 port) USB hub, I noticed a reduced connection speed when trying to use more than one drive simultaneously besides the obvious fact that you are already limited by the wireless network speed. This was compared to using the same procedure while having the USB hub directly attached to my iMac.
The way the external drives show from your Mac is similar to how the Time Capsule internal drive shows. When you select the Time Capsule from the Finder window, it will show all the external drives by name. The external drives, of course, should be formatted appropriately.
In order to backup these drives, you would need additional software such as Prosoft Backup or similar. You would not be able to accomplish it using Time Machine.
Attaching an external drive using this method is referred to as network attached storage. Not all software can fully use this connection method to all of it's capabilities.... yet. So it does not function quite the same as attaching the drive directly to your computer. You would lose certain functions, like most backup solutions or being able to boot from the drives. Even some software doesn't recognize the drives as usable storage.

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599

HT201250 How long should an initial time machine backup of tack for 675 GB?s with a USB external hard drive?

How long should an initial time machine backup of tack for 675 GB?s with a USB external hard drive?

Not much faster than 40 GBs-60GBs per hour. So, minimally, around 12 hours.

My external drive is full, how do I piggyback it with a new external hard drive?

My old external hard drive is full. How do I piggyback it with a new external hard drive? I am thinking of getting. 2tb western digital my studio for Mac.

Your iMac has four USB ports. If the new drive is also USB, just plug it into one of the unused ports.
Your machine also has a Firewire 800 port. If it is unused, you can connect a new external firewire drive to it.
Note - if you plan on using the new drive for booting (backup or emergency), such as by partitioning it and cloning your internal drive to one of the partitions on it, strongly suggest you go with a firewire drive.
In either case, firewire or USB, it's best to get a drive which has its own power supply.

I have a external hard drive connected, Finder will not let me search for files in the external hard drive how do i search in a hard drive

i have a external hard drive connected, Finder will not let me search for files in the external hard drive how do i search in a hard drive

What are you using to search? You should be able to search any drive in from the Finder. If you're having trouble, try "EasyFind" from the App Store (free). You can search any volumes with it.
Clinton

Can I use my IPad as a backup for my IMac instead of an external hard drive?

I'm wondering if I can use my iPad as a backup for my iPad instead of an external hard drive?

As your question says backup for your iMac I assume that is what you mean, as opposed to what is in the text. The iPad doesn't have a disk mode, and you can only copy onto it content that is supported by the apps that you've got. So personally I'd say no - external hard drives are easier to use as a backup and are a lot cheaper

Does file vault effect using a external hard drive as back up

does file vault effect using a external hard drive as back up

weird_glasses wrote:
... as you can guess Im still on L plates ...

I'm need to sell my MacBook and need to back up all my files includingn itunes will I be able to do so using an external hard drive?

I'm need to sell my MacBook and need to back up all my files including itunes will I be able to do so using an external hard drive?

To copy your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html Check that it's set up right by booting up from the external drive.

Will time capsule support Airportextreme 802.11ac and an external hard drive on my iMac (late 2011) with Yosemite?

I want to set up a new Airport extreme 802.11ac with an external drive as a wireless back up for time capsule. I have an iMac (late 2011) running Yosemite. Will this work, and if so, what are the recommended external hard drives that work the best.
The rationale for not buying a time capsule is that I have had 2 hard drive failures and replacements on both my iMacs and I am afraid if the time capsule drive fails, it will be yet another apple hard drive that has failed on me. I currently back up on G drive external drives.

Apple does not make hard drives. They may be using the same drive that's in your G-Drives.
You can backup to an external drive connected to the newest AEBS via USB.

Need some help with backing up external hard drive using Time Machine

Hi all, I'm trying to work out the best way to back up multiple iPhoto libraries using Time Machine.
At the moment I have got an iMac and Macbook Pro, both of which have an iPhoto library (with different content). Currently these are not backed up at all. So what I want to do is back both up to an NAS drive, which I know is straightforward.
What I also want to do is create one iPhoto library on an external hard drive that I can use with my MBP, and then delete the iPhoto library on my MBP to free up some hard drive space (it's running slower and slower and I'm hoping that this might help it run quicker).
So, as I want to have the library on two seperate drives in case one fails, what I want to know is whether I could use Time Machine to back up my external hard drive as well as the internal drive of my MBP? Also, would I need to have the external drive connected at all times for Time Machine to "see" it?
I hope that makes sense, all I seem to be doing currently is going round and round and can't work out whether what I want to do is possible or not.
Thanks in advance

If I understand your goal correctly, you're considering using Time Machine as external storage, and it doesn't work that way. Time Machine keeps around what it can, and older stuff gets flushed as the storage available to Time Machine reaches its lower threshold due to the addition of newer stuff. When the older stuff gets flushed is not predictable.
It is possible to have several Time Machine backups aimed at the same target (this can be done with Apple Time Capsule, for instance), though you might want to partition the disks to ensure that the intended amount of storage is available. Different NAS drives have different features here.
NAS is only as fast as your network connection, and that's almost always much slower than the in-box I/O connections; a local disk will be far faster than a NAS disk, just because of the bottleneck that is wired gigabit Ethernet, and most WiFi is slower and sometimes far slower than wired gigabit Ethernet. FWIW.
If your MacBook Pro is old enough and you have $$ but aren't in a position to spend $$$$$ on a newer model, then consider an in-place drive upgrade.
If your network connection is fast enough to transfer the amount of data you're dealing with in a reasonable time, there are also hosted storage options.
You can use a NAS drive as storage independent of Time Machine, and relocate stuff there. (You'll still want to have backups of that data, as NAS drives — even NAS with RAID — can still lose files, become corrupted or otherwise ruin your data day.
As for your performance, keeping about 10% or so free on the disks is the local preference, but it's worth reviewing the performance of the whole system — Performance Monitor, Console.app, etc — to see if there's something else going on, or if your system load and personal performance expectations are exceeding what your MacBook Pro can provide.

How do I Daisy Chain external Firewire drives

Sorry if this seems a dumb question but.....
I want to add another External Hard Drive as my current one is starting to get full, I'm using a Western Digital FireWire 800 currently and I believe that I can add another External FireWire 800 drive by daisy chaining it with the existing drive using a FW800 connector. Is this correct?
Will it just appear on the desktop as another drive to which I can save files etc or do I have to do anything else?
Once again sorry if this sounds like a dumb question but I just want to make sure I don't do anything that will cause me problems later down the line.

Yes, as long as drive 1 has two sockets, just plug drive 2 into drive 1 and drive 1 into the computer and it all works seamlessly; both appear on the desktop just as if they were plugged into separate sockets. Of course drive 1 must be powered, or drive 2 won't appear.

HT201250 I have two macbooks. Can I backup both machines using timemachine on one external hard drive?

I have two MacBooks, both operating on different OS - Leopard and Snow Leopard. Can they both be backed upusing time machine onto one external hard drive?

J D McIninch wrote:
Actually, it does both. However, if you use two machines with the same name, it can pose a problem. If you mount the Time Machine drive and open the backup db directory, you'll note that the subdirectories are arranged by system name. The information about the ethernet MAC ID is in hidden files.
Yes, as posted, to the user it's confusing (and accessing your backups via the Finder is not recommended).
Time Machine knows which is which, and will back up each Mac to the proper folder. When/if you want to use the "Star Wars" display to view or restore from either Mac's backups, it will show the backups for the Mac you're on.

Will Aperture backup to a vault with daisy chained external hard drives

Similar Messages

Maybe you are looking for