Will apple router connect to a non apple computer

im having issues with my D-Link DI 624 connecting to my iphone 4s, ipod touch and ipad so im looking at changing the router over. Will the apple router work on a windows based pc? or can any one offer a solution to a dlink router not connecting to any of the above apple products?
thanks

Yes, Apple routers work fine with all non-Apple products, as do Netgear, Cisco-Linksys, D-Link, TP-Link etc.

Similar Messages

  • E1200 router connectivity issue with windows 7 computer from sleep state over night

    recently purchased the e1200 and setup was a breeze but I'm  having difficulty with the primary computer (windows 7) connected to it, by wire, haven't used any wireless yet.  When the computer is put to sleep through the night, I have to restart the computer the next morning to get a signal but works fine if put to sleep during the day and awakened the same day to use the connection.  Have a second computer wired directly to the modem with vista that doesn't have this issue.  any thoughts out there. thanks

    Try this. Go to Control Panel>Click on Network and Sharing Center or Network and Internet and then Network and Sharing Center>Click on Change Adapter settings>Right Click on Local Area Connection (the adapter being used for the wired connection)>Click on Properties>Click in Configure>Go to the Power Management tab>Uncheck "Allow the computer to turn off the device to save power"

  • Upgraded to ios7, and can't connect to my non-intel computer anymore

    I have an iphone 4, and just upgraded to OS 7. I have a non-intel mac which won't run the newest ituens, and now itunes can't connect to my iphone to add music from my computer. Is there any workaround besides buying a new computer (which I can't really afford to do)?

    Yeah, turn roaming on.  The work wifi issue may be a firewall.  Have you checked with your IT department?

  • Why will my Iphone connect via USB on one computer and not another?

    My IPhone 5s connected to my laptop and Itunes no problem, as soon as i did the ITunes update now neither my laptop or my ITunes will read my iphone via USB. I have no idea how to fix it.
    (My laptop is Windows 8)
    It can't be a cable issue because i charged my IPhone via my desktop and it connected no problem, it's something to do with this ITunes update i think.
    Can someone suggest a fix please? I'm totally stuck!

    could be your computer's firewall is preventing the proper installation of your CIT200.  try disabling and reinstalling the drivers again.
    "Don't fix it if it ain't broken."

  • Wrt54g router connection to a usb enabled computer

    How do I allow a win 7 desktop with USB in another room use my wrt 54g router to get to the internet?
    Is there some sort of plug and play antenna? what is the part number?  what are the limitations? 

    Are you referring to a Wireless USB adapter? If so, any wireless usb adapter works with WRT54G. As long as you have the router properly configured, you can get any wireless device connected.
    I'd suggest you go for a linksys brand wireless USB adapter for compatibility.

  • How to connect envy to non wirelss computer

    how do i connect a usb cable to envy 114

    BigRed,
    Welcome to the forum!
    If the printer came with a USB connector port, it is on the back, in the corner.
    See page 6 in the manual, item 19. 
    Note the warning on that page:
    19 Port for connecting with a USB cable to a computer, instead of wireless connection. Some features are available only with a wireless network connection.
    HP ENVY 110 e-All-in-One D411 Series Printer  
    Instructions for connecting to the network start on Page 31.
    Our Experts work hard to help!
    Click the Kudos Star on the Left as "Thanks for the Help!"
    Mark this Post “Accept as Solution” to accept a Fix or Workaround to an issue!
    Note: You can find “Accept as Solution” boxes on Subjects started by you.
    Remember:  The more information you provide, the better help you receive.
    Always Include:  (Notebook) Product Number , Printers – Model Number ,
                       Operating System, and an Error Description
                            Never give out your Serial Number
                               2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • Printer will only work connected with USB direct to computer

    A few weeks ago I was printing a long document. In the middle of it, it went on hold. Since then I cannot print wireless with either of my computers. If I plug the USB direct from the printer to the computer the printer will work. I cannot print wireless. Do I need a new Airport?

    Welcome to the discussions!
    +Do I need a new Airport?+
    Try a simple reset of the printing system as follows:
    Make sure that the printer is plugged into the AirPort Express and everything is powered up
    Open System Preferences on the dock and click Print & Fax
    Right-click or control-click in the area where you see the printer listed
    Select Reset Printing System
    Click the + button
    Highlight your printer on the available printer list
    Click Add
    Does that provide any help?

  • IPod Touch will Not Charge/Connect to Computer

    So, my iPod Touch 4G running ios 5.1.1 will not charge/connect to iTunes on my computer. It charges everywhere else but not on my computer. I even tried another charger. My computer says all my devices are up to date. But I can't find the 'Apple Driver' someone told me to look for! I have looked at 10+ pages on google but nothing works! Help?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests

  • Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

    Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

    So yu tried all of this:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    If you had then time for an appointment at ther Genius Bar of an Apple store.

  • For a LAN network in my office, all laptops are Windows based and the internet is through LAN and other computer get connected with adhoc without the router. My Apple computer nor my iPhone 5 get connected. How do I connect to this Internet?

    In the office, All my colleges use Windows laptops. The Internet connection is out of LAN wire installed in one of the computers. Others use Internet by creating adhoc connection. However none of the apple products are being able to connect to this connection.How can i connect my MacBook Pro or iPhone 5 to this Internet network?

    Just how is the one computer connecting to the internet? What type of connection does the office have, DSL, Cable or is it a Data connection through a Cell phone provider.
    I doubt all other computer are doing Ad-Hoc but are probably Sharing the Internet connection with Internet Connection Sharing from that one Windows base PC.
    All you khave to do is Connect to that same WiFi SSID name and have the correct password for it.

  • Will apple tv connect to scientific atlanta explorer 8300 hdc through hdmi?

    Will apple tv connect to scientific atlanta explorer 8300 hdc through hdmi cable?

    Welcome to the Apple Community.
    No it won't sorry, you need to connect it to a TV or to a TV via a receiver.

  • My ipad mini is stuck on the connect to itunes screen. Will apple replace my iPad if it continues not to work?

    I recieved an iPad mini as gift this past spring (2013). I tried to upate my iPad to the new iOS 7.0.4 software. It seemed work fine, but when it reboted it got stuck on the connect to itunes screen. I've connected my iPad to itunes and it does not recognize it. When I connected my iPhone 5s to itunes it recognized it immediately. Will apple replace my ipad if the connect to itunes screen doesn't go away?

    The iPad doesn't need to be replaced.
    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • When will apple begin to use non us banks for apple pay?

    when will apple begin to use non us banks for apple pay?

    Apple have not announced any dates for non-US rollout of Apple Pay as yet. They have to negotiate agreements with local banks and local branches of credit card companies in multiple countries, ensure they are in compliance with local laws and many other things before this can happen. It is going to take months at the very least I'd guess before you will see it even in major EU countries and longer for places like Asia and the Middle East. It will probably be rolled out in stages over the next year or two (or more) until most of the world has Apple Pay available.
    It took 2+ years after its US debut for iTunes Music Store to spread to many other nations, and the video store was about 12-18 months plus as I recall. Apple Pay probably makes those negotiations look simple in comparison.

  • TS4611 I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also after 3 meters away it keeps searching for network! It is the second try and the same issue. Will Apple ever come up with a solution?

    I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also, after 3 meters away from the rooter it keeps searching for network! It is the second try and the same issues. Will Apple ever come up with a solution? There is a program pack for the connection issue but I cannot believe that this computer wifi keeps connected only while nearby the rooter!

    Applied this update?
    http://support.apple.com/kb/TS4611?viewlocale=en_US&locale=en_US
    If the update is installed aready, you may have to wait until OS X 10.8.5
    update if and when it is relased.
    Best.

  • Will apple ever allow iPhone to manage music without connecting to iTunes on a computer?

    I record lots of music with my friends and we usually send them over through social media file transfers.  My current phone detects the music once downloaded and adds it to my library for playing.  Will Apple allow this feature on the iPhone, I am getting one and I am really concerned about this feature, as it is very hectic to keep on connecting your phone to a computer every time you would like to add a song to the default music player's library.

    I'm afraid Apple won't allow to add/edit music directly on the iPhone. At least, in the nearest future.

Maybe you are looking for

  • Argument count mismatch

    Hi, I'm adding an Event.ENTER_FRAME to my script and getting it to call a function named test. When I run my application I get an error saying that my test function expected 0 arguments but got 1. I'm not passing it any arguments so I dont understand

  • Firmware for mfp m175nw

    Where can I get the eprint firmware for Laserjet 100 MFP M175nw...

  • Industry-specific measurements and key performance indicators(KPIs) in OCDM

    Please, help me to find the documentation about KPIs and metrics in OCDM's reports. I wish to get the full list of OCDM's KPIs. It's necessary for us as foundation of OCDM's implementation. Thanks.

  • Garageband automatically opens after I close it, how do I change this?

    When I close garageband it opens back up givening me options to choose to create a new project or open an existing one. I want to close it! There is no red button to close this menu only to enlarge or downsize. Thanks

  • Help! My screen is falling off!

    Hi. I almost died today when I lifted my lid up and noticed that the screen wasn't attached to the unibody! I'm wondering if anyone can help me, I got my MacBook just over a year ago now and have had the screen replaced (by an Apple Certified place)